Developments in mycotoxin analysis: an update for 2018-19

This review summarises developments on the analysis of various matrices for mycotoxins that have been published in the period from mid-2018 to mid-2019. Analytical methods to determine aflatoxins, Alternaria toxins, ergot alkaloids, fumonisins, ochratoxins, patulin, trichothecenes, and zearalenone are covered in individual sections. Advances in sampling strategies are also discussed in a dedicated section. In addition, developments in multi-mycotoxin methods – including comprehensive mass spectrometric-based methods as well as simple immunoassays – are also reviewed. This critical review aims to briefly present the most important recent developments and trends in mycotoxin determination as well as to address limitations of the presented methodologies.

Immunoaffinity Column Cleanup with Liquid Chromatography for Determination of Aflatoxin B1 in Corn Samples: Interlaboratory Study

An interlaboratory study was conducted to evaluate the effectiveness of an immunoaffinity column cleanup liquid chromatography (LC) method for the determination of aflatoxin B1 levels in corn samples, enforced by European Union legislation. A test portion was extracted with methanolwater (80 + 20); the extract was filtered, diluted with phosphate-buffered saline solution, filtered on a microfiber glass filter, and applied to an immunoaffinity column. The column was washed with deionized water to remove interfering compounds, and the purified aflatoxin B1 was eluted with methanol. Aflatoxin B1 was separated and determined by reversed-phase LC with fluorescence detection after either pre- or postcolumn derivatization. Precolumn derivatization was achieved by generating the trifluoroacetic acid derivative, used by 8 laboratories. The postcolumn derivatization was achieved either with pyridinium hydrobromide perbromide, used by 16 laboratories, or with an electrochemical cell by the addition of bromide to the mobile phase, used by 5 laboratories. The derivatization techniques used were not significantly different when compared by the Student's t-test; the method was statistically evaluated for all the laboratories. Five corn sample materials, both spiked and naturally contaminated, were sent to 29 laboratories (22 Italian and 7 European). Test portions were spiked with aflatoxin B1 at levels of 2.00 and 5.00 ng/g. The mean values for recovery were 82% for the low level and 84% for the high contamination level. Based on results for spiked samples (blind pairs at 2 levels) as well as naturally contaminated samples (blind pairs at 3 levels), the values for relative standard deviation for repeatability (RSDr) ranged from 9.9 to 28.7%. The values for relative standard deviation for reproducibility (RSDR) ranged from 18.6 to 36.8%. The method demonstrated acceptable within- and between-laboratory precision for this matrix, as evidenced by the HorRat values.

Determination of Ochratoxin A in Green Coffee by Immunoaffinity Column Cleanup and Liquid Chomatography: Collaborative Study

A collaborative study was conducted to evaluate a method using immunoaffinity column cleanup with liquid chromatography (LC) for the determination of ochratoxin A (OTA) in green coffee at levels that could be included in possible future regulations of the European Union. The test portion was extracted with methanol–3% aqueous sodium hydrogen carbonate solution (50 + 50, v/v). The extract was filtered, and the filtrate was diluted with phosphate-buffered saline and applied to an immunoaffinity column containing antibodies specific for OTA. After washing, the toxin was eluted from the column with methanol and quantified by LC with fluorescence detection. Pairs of 4 homogeneous noncontaminated and naturally contaminated materials (mean levels of <0.12, 2.44, 5.15, and 13.46 ng/g) and blank samples (<0.12 ng/g) for spiking were sent to 20 participant laboratories from 8 countries. The materials were analyzed according to the method description and all difficulties encountered in the analysis were reported. Statistical analysis was carried out according to the Harmonized Protocol of the International Union of Pure and Applied Chemistry. The relative standard deviation for repeatability (RSDr) ranged from 7.42 to 20.94%, and the relative standard deviation for reproducibility (RSDR) ranged from 16.34 to 29.17%. The method showed acceptable within-laboratory and between-laboratories precision for green coffee materials, as evidenced by HorRat values of ≤0.85, at the studied range, for spiked and naturally contaminated materials. The mean recovery was 92.8% for green coffee material spiked with OTA at a level of 4.82 ng/g.

Developments in mycotoxin analysis: an update for 2017-2018

This review summarises developments that have been published in the period from mid-2017 to mid-2018 on the analysis of various matrices for mycotoxins. Analytical methods to determine aflatoxins, Alternaria toxins, ergot alkaloids, fumonisins, ochratoxins, patulin, trichothecenes, and zearalenone are covered in individual sections. Advances in sampling strategies are discussed in a dedicated section, as are methods used to analyse botanicals and spices, and newly developed comprehensive liquid chromatographic-mass spectrometric based multi-mycotoxin methods. This critical review aims to briefly discuss the most important recent developments and trends in mycotoxin determination as well as to address limitations of the presented methodologies.

Developments in mycotoxin analysis: an update for 2016-2017

This review summarises developments in the determination of mycotoxins over a period between mid-2016 and mid-2017. Analytical methods to determine aflatoxins, Alternaria toxins, ergot alkaloids, fumonisins, ochratoxins, patulin, trichothecenes and zearalenone are covered in individual sections. Advances in proper sampling strategies are discussed in a dedicated section, as are methods used to analyse botanicals and spices and newly developed LC-MS based multi-mycotoxin methods. This critical review aims to briefly discuss the most important recent developments and trends in mycotoxin determination as well as to address limitations of the presented methodologies.

Developments in mycotoxin analysis: an update for 2015-2016

This review summarises developments in the determination of mycotoxins over a period between mid-2015 and mid-2016. Analytical methods to determine aflatoxins, Alternaria toxins, ergot alkaloids, fumonisins, ochratoxins, patulin, trichothecenes and zearalenone are covered in individual sections. Advances in proper sampling strategies are discussed in a dedicated section, as are methods used to analyse botanicals and spices and newly developed liquid chromatography mass spectrometry based multi-mycotoxin methods. This critical review aims to briefly discuss the most important recent developments and trends in mycotoxin determination as well as to address limitations of presented methodologies.

Challenges in the analysis of multiple mycotoxins

The problems associated with different groups or ‘families’ of mycotoxins have been known for some time, and for many years certain groups of mycotoxins have been known to co-occur in commodities and foods. Until fairly recently commodities and foods were analysed for individual toxins or groups of related toxins and attempts to measure multiple groups of toxins required significant investments in terms of time, effort, and expense. Analytical technologies using both the instrument-intensive techniques, such as mass spectrometry, and screening techniques, such as immunoassays, have progressed significantly in recent years. This has led to the proliferation of techniques capable of detecting multiple groups of mycotoxins using a variety of approaches. Despite considerable progress, the challenges for routine monitoring of multiple toxins continue. Certain of these challenges, such as the need for co-extraction of multiple analytes with widely different polarities and the potential for carry-over of matrix components that can influence the results, are independent of the analytical technique (MS or immunoassay) used. Because of the wide variety of analytical platforms used for multi-toxin analysis, there are also specific challenges that arise amongst the analytical platforms. We showed that chromatographic methods with optical detection for aflatoxins maintain stable response factors over rather long periods. This offers the potential to reduce the analytical burden, provided the use of a single signal receives general acceptance once shown in practise as working approach. This must however be verified by a larger community of laboratories. For immunosensors the arising challenges include the reusability of sensors and, for chromatography-based assays they include the selection of appropriate calibration systems. In this article we seek to further describe the challenges associated with multi-toxin analysis and articulate how such challenges have recently been addressed.

Developments in mycotoxin analysis: an update for 2014-2015

This review summarises developments in the determination of mycotoxins over a period between mid-2014 and mid-2015. In tradition with previous articles of this series, analytical methods to determine aflatoxins, Alternaria toxins, ergot alkaloids, fumonisins, ochratoxins, patulin, trichothecenes and zearalenone are covered in individual sections. Advances in proper sampling strategies are discussed in a dedicated section, as are new methods used to analyse botanicals and spices and newly developed LC-MS based multi-mycotoxin methods. The critical review aims to briefly discuss the most important developments and trends in mycotoxin determination as well as to address shortcomings of current methodologies.

Developments in mycotoxin analysis: an update for 2013-2014

This review highlights developments in the determination of mycotoxins over a period between mid-2013 and mid-2014. It continues in the format of the previous articles of this series, emphasising on analytical methods to determine aflatoxins, Alternaria toxins, ergot alkaloids, fumonisins, ochratoxins, patulin, trichothecenes and zearalenone. The importance of proper sampling and sample preparation is briefly addressed in a dedicated section, while another chapter summarises new methods used to analyse botanicals and spices. As LC-MS/MS instruments are becoming more and more widespread in the determination of multiple classes of mycotoxins, another section is focusing on such newly developed multi-mycotoxin methods. While the wealth of published methods during the 12 month time span makes it impossible to cover every single one, this exhaustive review nevertheless aims to address and briefly discuss the most important developments and trends.

Immunoaffinity clean-up of mycotoxins with organic solvent-free elution

A novel immunoaffinity (IA) clean-up procedure for the isolation of mycotoxins from maize extracts is described. Commonly, mycotoxins are eluted with organic solvents from IA columns after isolation. The new procedure uses water at 70 °C as alternative. The resulting eluate is suitable for direct and complete injection onto a reversed-phase liquid-chromatography column. Evaporation, reconstitution or dilution are not required. The procedure has been tested for a variety of mycotoxins, including deoxynivalenol (DON) zearalenone, T-2 and HT-2 toxins, aflatoxins and ochratoxin A in an array of different matrices. The example of DON in maize is discussed in more detail and evaluated for repeatability (5%, n=10) and recovery (95%, n=10).

Developments in mycotoxin analysis: an update for 2012-2013

This review highlights developments in mycotoxin analysis and sampling over a period between mid-2012 and mid-2013. It covers the major mycotoxins: aflatoxins, Alternaria toxins, ergot alkaloids, fumonisins, ochratoxins, patulin, trichothecenes and zearalenone. A wide range of analytical methods for mycotoxin determination in food and feed were developed last year, in particular immunochemical methods and liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS)-based methods. After a section on sampling and sample preparation, due to the rapid spread and developments in the field of LC-MS/MS multimycotoxin methods, a separate section has been devoted to this area of research. It is followed by a section on mycotoxins in botanicals and spices, before continuing with the format of previous reviews in this series with dedicated sections on method developments for the individual mycotoxins.

Performance criteria for rapid screening methods to detect mycotoxins

The paper describes the validation of screening methods that are used for official control to classify samples into negative and suspect positive samples. The concept is based on the principle that negative samples are considered as compliant, whereas suspect positive samples need to be re-analysed with confirmatory methods. An important performance criterion often used is a maximum value of 5% for the probability of false negative results obtained on samples that contain the analyte at the legal limit. Since the result of analysis is a binary decision, specific validation schemes need to be applied. The paper places emphasis on practical aspects of the calculation of the method performance characteristics, which are required to check whether the methods fulfil the performance criterion. The paper shows that screening methods based on a visual inspection, e.g. a dipstick, require special data treatment. In contrast there are many methods where the classification into negative and suspect positive samples is based on the comparison of a measured response against a cut-off value. This type of methods can be validated with quantitative statistics. The paper also elaborates on the calculation of the rate of false positive results of compliant samples. In addition the impact on the economical aspect of the use of the screening method is estimated, taking into account external factors such as the cost ratio between the screening and the confirmatory method and the occurrence of non-compliant samples in the entire population of the samples.

Critical evaluation of LC-MS-based methods for simultaneous determination of deoxynivalenol, ochratoxin A, zearalenone, aflatoxins, fumonisins and T-2/HT-2 toxins in maize

The results of a proficiency test for the LC-MS/(MS) determination of up to 11 mycotoxins (aflatoxins B1, B2, G1 and G2, fumonisins B1 and B2, ochratoxin A, deoxynivalenol, T-2 and HT-2 toxins and zearalenone) in maize were evaluated to identify possible strengths and weaknesses of various methodologies used by the 41 participating laboratories. The majority of laboratories (56%) used mixtures of acetonitrile:water for extraction. Other laboratories used methanol:water mixtures (17%) or performed two consecutive extractions with phosphate buffer solution (PBS) followed by methanol (15%). Few laboratories used mixtures of acetonitrile:water:methanol (7%), water:ethyl acetate (2.5%) or PBS alone (2.5%). The majority of laboratories (58%) used a clean-up step prior to chromatography. The remaining laboratories analysed crude extracts (37%) or used a mixed approach (5%). The amount of sample equivalent injected into LC-MS/(MS) ranged between 0.1-303 mg for purified extracts and 0.08-20 mg for directly analysed crude extracts. External (54%), matrix-matched (22%) or stable isotope-labelled internal standards calibration (24%) were used for toxin quantification. In general, extraction mixtures of water with acetonitrile, methanol or both provided good results for quantitative extraction of mycotoxins from maize. Laboratories using sample extract clean-up reported acceptable results for the majority of mycotoxins. Good results were also obtained by laboratories that analysed crude extracts although a high variability of results was observed for all tested mycotoxins. Matrix-matched calibration or isotope-labelled internal standards efficiently compensated matrix effects whereas external calibration gave reliable results by injecting ≤10 mg of matrix equivalent amounts. Unacceptable high recovery and high variability of fumonisin results were obtained by the majority of laboratories, which could not be explained and thus require further investigation. These findings provide the basis for the optimization and selection of methods to be used in future interlaboratory validation studies to derive their performance characteristics for simultaneous determination of mycotoxins in maize.

Determination of fusarium mycotoxins in wheat, maize and animal feed using on-line clean-up with high resolution mass spectrometry

An automated method involving on-line clean-up and analytical separation in a single run using TurboFlow™ reversed phase liquid chromatography coupled to a high resolution mass spectrometer has been developed for the simultaneous determination of deoxynivalenol, T2 toxin, HT2 toxin, zearalenone and fumonisins B1 and B2 in maize, wheat and animal feed. Detection was performed in full scan mode at a resolution of R = 100,000 full width at half maximum with high energy collision cell dissociation for the determination of fragment ions with a mass accuracy below 5 ppm. The extract from homogenised samples, after blending with a 0.1% aqueous mixture of 0.1% formic acid/acetonitrile (43:57) for 45 min, was injected directly onto the TurboFlow™ (TLX) column for automated on-line clean-up followed by analytical separation and accurate mass detection. The TurboFlow™ column enabled specific binding of target mycotoxins, whereas higher molecular weight compounds, like fats, proteins and other interferences with different chemical properties, were removed to waste. Single laboratory method validation was performed by spiking blank materials with mycotoxin standards. The recovery and repeatability was determined by spiking at three concentration levels (50, 100 and 200% of legislative limits) with six replicates. Average recovery, relative standard deviation and intermediate precision values were 71 to 120%, 1 to 19% and 4 to 19%, respectively. The method accuracy was confirmed with certified reference materials and participation in proficiency testing.

Evaluation of the effect of mycotoxin binders in animal feed on the analytical performance of standardised methods for the determination of mycotoxins in feed

Recently, the use of substances that can suppress or reduce absorption, promote the excretion of mycotoxins or modify their mode of action in feed, so-called mycotoxin binders, has been officially allowed in the European Union as technological feed additives. The influence of the addition of mycotoxin binders to animal feed on the analytical performance of the official methods for the determination of mycotoxins was studied and the results are presented. Where possible standardised methods for analysis were applied. Samples of 20 commercial mycotoxin binders were collected from various companies. The following mycotoxins were included in the study: aflatoxin B₁, deoxynivalenol, zearalenone, ochratoxin A, fumonisins B₁ and B₂, T-2 and HT-2 toxins. A binder (or binders combined in a group) was mixed with feed material containing the mycotoxin, and the feed material was analysed. For data evaluation, the mean values were compared by Student's t-test (an independent two-sample t-test with unequal sample sizes and equal variance). The repeatability standard deviation of each method was used as an estimate of method variability. No significant differences (p = 0.05) in mycotoxin levels between binder-free material and the material containing different binders were found. Further, the possible effects of binder addition in combination with processing (pelletising) on the amount of aflatoxin B₁ determined in feed were studied. Three commercial mycotoxin binders containing hydrated sodium calcium aluminosilicate (HSCAS) as the main component were used in these experiments. Feed samples with and without mycotoxin binders were pelletised with and without steam treatment. After pelletising, materials were analysed for AFB₁. Only the combination pelletising and a mixture of binders added at a total level of 1.2% had a significant effect (41% reduction) on the amount of AFB₁ determined.

Substances for reduction of the contamination of feed by mycotoxins: a review

The global occurrence of mycotoxins is considered to be a major risk factor for human and animal health. Contamination of different agricultural commodities with mycotoxins still occurs despite the most strenuous prevention efforts. As a result, mycotoxin contaminated feed can cause serious disorders and diseases in farm animals. A number of approaches, such as physical and chemical detoxification procedures, have been used to counteract mycotoxins. However, only a few of them have practical application. A recent and promising approach to protect animals against the harmful effects of mycotoxin contaminated feed is the use of substances for reduction of the contamination of feed by mycotoxins. These substances, so-called mycotoxin binders (MB), are added to the diet in order to reduce the absorption of mycotoxins from the gastrointestinal tract and their distribution to blood and target organs, thus preventing or reducing mycotoxicosis in livestock. Recently, the use of such substances as technological feed additives has been officially allowed in the European Union. The efficacy of MB appears to depend on the properties of both the binder and the mycotoxin. Depending on their mode of action, these feed additives may act either by binding mycotoxins to their surface (adsorption), or by degrading or transforming them into less toxic metabolites (biotransformation). Biotransformation can be achieved by mycotoxin-degrading enzymes or by microorganisms producing such enzymes. Various inorganic adsorbents, such as hydrated sodium calcium aluminosilicate, zeolites, bentonites, clays, and activated carbons, have been tested and used as MB. An interesting alternative to inorganic adsorbents for the detoxification of mycotoxins is the use of organic binders, such as yeast cell wall components, synthetic polymers (cholestyramine, polyvinylpyrrolidone), humic substances and dietary fibres. This paper gives an overview of the current knowledge and situation in the field of MB. The most important types of MB, mechanism of their action, and their application as a part of general strategy to counteract mycotoxins are described in this review. Recent advances in the use and study of MB, as well as data of their in vitro and in vivo effectiveness are given. Problems, potential, current trends and perspectives associated with the use of MB are discussed as well in the review.

Determination of fumonisins B1 and B2 in maize-based baby food products by HPLC with fluorimetric detection after immunoaffinity column clean-up

A method for the determination of fumonisin B1 (FB1) and B2 (FB2) in different commercial maize-based products for infants and young children was developed and tested in a limited validation study involving 3 laboratories. The method used extraction at 55 °C with an acidic mixture of methanol-acetonitrile-phosphate/citrate buffer, clean-up through immunoaffinity column and fumonisin determination by high performance liquid chromatography with automated pre-column derivatisation with o-phthaldialdehyde. Recovery experiments were performed at five spiking levels in the ranges of 80-800 µg/kg FB1 and 20-200 µg/kg FB2. Mean recoveries ranged from 83 to 97% for FB1 and from 61 to 78% for FB2. Relative standard deviations for within-laboratory repeatability (RSDr) ranged from 5 to 12% for FB1 and from 8 to 13% for FB2, whereas relative standard deviation for between-laboratory reproducibility (RSDR) ranged from 6 to 10% for FB1 and from 9 to 16% for FB2. The limit of quantification of the method (signal to noise ratio of 6) was 2.8 µg/kg for FB1 and 2.2 µg/kg for FB2. Fumonisins were found in 6 out of 19 maize-based baby foods obtained from the Italian retail market at levels up to 53 µg/kg.

Transcriptomic-based bioassays for the detection of type A trichothecenes

The type A trichothecenes T-2 toxin (T-2) and HT-2 toxin (HT-2) are hazardous Fusarium products that contaminate many field crops growing in cold to temperate regions across the world. Toxicity studies in laboratory and farm animals have been used to derive a temporary tolerable daily intake (t-TDI) for the sum of T-2 and HT-2 of no more than 60 ng/kg body weight. To protect the consumers, it is now necessary to screen a large number of food samples for the presence of these poisonous fungal metabolites. Towards that goal, we discovered that the transcriptional apparatus of a human carcinoma cell line (MCF7) provides a sensitive biological sensor of type A trichothecenes. In fact, exposure of this easy-to-culture cell line to T-2 or HT-2 results in the regulation of >2,000 different transcripts with expression changes ranging from >5,000-fold gene inductions to >40-fold gene repressions. These transcriptional responses have been exploited to develop practical microchip and reverse transcription-polymerase chain reaction (RT-PCR) assays for the detection of type A trichothecenes at parts per billion levels.

Determination of aflatoxin B1 in tiger nut-based soft drinks

An analytical method for the determination of aflatoxin B1 in a tiger nut-based soft drinks named 'horchata' is described. The method is based on an immunoaffinity clean-up, followed by HPLC separation and fluorescence detection after electrochemical post-column derivatization. The detection limit (S/N = 3) and the quantification limit (S/N = 10) were 0.02 and 0.06 microg kg(-1), respectively. The mean recovery at a level of 2 microg l(-1) was 88% (n = 6) and the coefficient of variation was 9%. The method was applied to conduct a small market survey for a beverage named 'horchata' that is frequently consumed by parts of the population in Southern Europe. Twenty-two samples from Spanish and Belgian supermarkets were analysed. As a result, only one sample was found to contain aflatoxin B1 at the limit of quantitation of the method.

Determination of ochratoxin A in green coffee by immunoaffinity column cleanup and liquid chomatography: collaborative study

A collaborative study was conducted to evaluate a method using immunoaffinity column cleanup with liquid chromatography (LC) for the determination of ochratoxin A (OTA) in green coffee at levels that could be included in possible future regulations of the European Union. The test portion was extracted with methanol-3% aqueous sodium hydrogen carbonate solution (50 + 50, v/v). The extract was filtered, and the filtrate was diluted with phosphate-buffered saline and applied to an immunoaffinity column containing antibodies specific for OTA. After washing, the toxin was eluted from the column with methanol and quantified by LC with fluorescence detection. Pairs of 4 homogeneous noncontaminated and naturally contaminated materials (mean levels of < 0.12, 2.44, 5.15, and 13.46 ng/g) and blank samples (< 0.12 ng/g) for spiking were sent to 20 participant laboratories from 8 countries. The materials were analyzed according to the method description and all difficulties encountered in the analysis were reported. Statistical analysis was carried out according to the Harmonized Protocol of the International Union of Pure and Applied Chemistry. The relative standard deviation for repeatability (RSDr) ranged from 7.42 to 20.94%, and the relative standard deviation for reproducibility (RSDR) ranged from 16.34 to 29.17%. The method showed acceptable within-laboratory and between-laboratories precision for green coffee materials, as evidenced by HorRat values of < or = 0.85, at the studied range, for spiked and naturally contaminated materials. The mean recovery was 92.8% for green coffee material spiked with OTA at a level of 4.82 ng/g.

Screening survey of deoxynivalenol in beer from the European market by an enzyme-linked immunosorbent assay

Deoxynivalenol (DON) was analysed in 313 beer samples collected from the European retail market using a commercially available immunoassay kit (enzyme-linked immunosorbent assay, ELISA). The incidence rate was about 87%, while most samples (73%) had contamination levels lower than 20 ng m(-1). The contamination ranged between 4.0 and 56.7 ng ml(-1), with an average of 13.5 ng ml(-1). A statistically significant correlation between alcohol levels and DON contamination was found, as well as a significant difference between bottom, top and spontaneous fermenting beers. Twenty-seven beer samples were compared using a second ELISA kit and a good correlation was obtained between the two kits (r = 0.93). Although when compared with gas chromatography-mass spectrometry the ELISA tended to overestimate the results, a good correlation (r=0.94) between the two methods was observed. Monitoring of DON in beer is important considering that DON production is dependent on the weather and that it can contribute significantly to the tolerable daily intake of DON, especially for frequent beer consumers.

Novel sampling methods for the analysis of mycotoxins and the combination with spectroscopic methods for the rapid evaluation of deoxynivalenol contamination

A novel non-destructive sampling approach is described for the identification of food matrices contaminated with deoxynivalenol and other mycotoxins. This technique is different from currently applied sampling procedures for this purpose and is based on the principle that surface material from the tested goods is collected on a filter and brought to chemical or spectroscopic analysis. This approach has been applied to several matrices and mycotoxins, with a focus on those mycotoxin-matrix combinations that are of main relevance due to current or future legislation. Tests were carried out with a facility that has been shown to be suitable to process large quantities of materials at points of transaction, such as harbour. Further experiments with a small sampling lance prototype showed that analytical results from the chemical analysis of the tested goods can be correlated with the results obtained with this novel sampling procedure.

Trichothecenes: reference materials and method validation

The frequent contamination of food and feed with trichothecene mycotoxins, the high consumption of these products, and the potential risk associated herewith, has led to an increasing public awareness and therefore to the establishment of measures to control trichothecene contamination. The analytical difficulty and the economic importance of controlling trichothecenes in food and feed support the need for certified reference materials (CRMs) and validated methods. They form invaluable tools to ensure comparability and traceability in analytical measurements and are very useful for the implementation of written standards, legislation/regulations and laboratory accreditation. The present paper provides an overview of previous work, current strategies and prospectives for the production of CRMs and validation of analytical methods in the field of trichothecene analysis. Additional information is given on methodological demands, normative frameworks and commonly accepted procedures.

Determination of the artificial sweetener Sucralose by capillary electrophoresis

The artificial intense sweetener 1,6-dichloro-1,6-dideoxy-beta-D-fructofuranosyl-4-chloro-4-deoxy-alpha-D-galactopyranose (Sucralose) was determined by capillary electrophoresis with indirect ultraviolet absorption in a 3,5-dinitrobenzoic acid buffer at pH 12.1. The method allowed determination of Sucralose in low-calorie soft drinks, without any sample clean-up over a linear range of 42-1000 mg x l(-1) (r=0.9991). The limits of detection and determination were 28 and 42 mg x l(-1), respectively, and the repeatability for a mean concentration of 100 mg x l(-1) was 4.2% for the signal area and 3.6% for the migration time, which were deemed satisfactory for use in food control.

Correction of analytical results for recovery: a comparison of the method performance characteristics from recent collaborative trials studies for aflatoxin quantification using conventional and robust statistics

Results from recently conducted collaborative trials on the determination of aflatoxin B(1) in various matrices have been evaluated to establish whether the use of recovery data would result in a distinct change of the relative between-laboratory standard deviation (RSD(R)) of the corrected data compared with the uncorrected data. In addition, we applied conventional and robust statistics to evaluate whether the impact of the use of recovery data on the estimation of RSD(R) depended on the statistical method applied for data analysis. This investigation was based on means before and after correction for recovery. The method performance characteristics were calculated using results from naturally contaminated test materials, while the results from test materials fortified with the target analytes were used to estimate the recovery. The study revealed that applying conventional and robust statistics in general led to comparable estimates for RSD(R). The comparison about the use of recovery data showed that in most cases, the RSD(R) obtained from the analysis of aflatoxin B(1) decreased after correction of the results for recovery. This tendency was similar when the comparison was done using robust or conventional statistics. However, in three cases, conventional statistics yielded a higher RSD(R) for the corrected data, whereas robust statistics showed the opposite. Looking carefully at the data, the treatment of conventional statistics indicated that the way outliers are detected and removed could result in an under- or overestimation of RSD(R). Applying the law of error propagation revealed that most likely the correlation between the uncorrected data and the recovery rate led to a reduced variability of the data corrected for recovery.

Determination of aflatoxin B1 in baby food (infant formula) by immunoaffinity column cleanup liquid chromatography with postcolumn bromination: collaborative study

A collaborative study was conducted to evaluate the effectiveness of an immunoaffinity column cleanup liquid chromatography (LC) method for determination of aflatoxin B, in a milk powder based infant formula at a possible future European regulatory limit (0.1 ng/g). The test portion was extracted with methanol-water (8 + 2 [v + v]), filtered, diluted with water, and applied to an immunoaffinity column. The column was washed with water to remove interfering compounds, and the purified aflatoxin B1 was eluted with methanol. The separation and determination of the aflatoxin B1 was performed by reversed-phase LC and detected by fluorescence after postcolumn derivatization (PCD) involving bromination. PCD was achieved with either pyridinum hydrobromide perbromide (PBPB) or an electrochemical (Kobra) cell by addition of bromide to the mobile phase. The baby food (infant formula) test samples, both spiked and naturally contaminated with aflatoxin B1, were sent to 14 laboratories in 13 different European countries. Test portions were spiked at levels of 0.1 and 0.2 ng/g for aflatoxin B1. Recoveries ranged from 101 to 92%. Based on results for spiked test samples (blind pairs at 2 levels) and naturally contaminated test samples (blind pairs at 3 levels), the relative standard deviation for repeatability (RSDr) ranged from 3.5 to 14%. The relative standard deviation for reproducibility (RSDR) ranged from 9 to 23%. Nine participants used PBPB derivatization, and

Development of a simplified densitometer for the determination of aflatoxins by thin-layer chromatography

A simple, miniaturised and low power consuming (battery, fully semiconductor based) detector cell (SeBaDeC) was developed for the densitometric measurement of aflatoxins on TLC plates. A UV-light emitting diode (UV-LED) with a peak emission wavelength of 370 nm was used for fluorescence excitation, while a photo diode with a peak sensitivity of 440 nm in combination with a 418 nm cut-off filter was applied for detecting the fluorescence intensity. The resulting signal was further amplified by means of a commonly used operational amplifier integrated circuit (OA) and directly converted into a digital signal with a simple analogue-digital-converter (ADC). This signal was recorded at the serial (RS232) port of a portable PC and processed with a spreadsheet program. The software used for data recording is freeware and available in its source code, and the long lifetime of the UV-LED (up to 10 000 h) permits a maintenance free application of this device. This simplified device has shown to be able to detect concentrations of aflatoxins of 1 ng, thus offering a cheap and sensitive alternative to currently available TCL scanners.

Immunoaffinity column clean-up prior to thin-layer chromatography for the determination of aflatoxins in various food matrices

A one-dimensional TLC method to determine aflatoxins (B1, B2, G1, G2) in various food matrices was elaborated which abstains fully on the use of chlorinated solvents. It implements an immunoaffinity clean-up step after extraction with methanol. The aflatoxins were quantified by densitometry. The method has shown to be rapid and efficient. In-house performance characteristics were established. The limit of quantification was found to be significantly lower than current regulatory limits for aflatoxin control outside and within the European Community. The obtained recovery and precision data gave a strong indication, that the method is likely to give satisfactory performance if tested in a future collaborative trial.

Immunoaffinity column cleanup with liquid chromatography using post-column bromination for determination of aflatoxins in peanut butter, pistachio paste, fig paste, and paprika powder: collaborative study

A collaborative study was conducted to evaluate the effectiveness of an immunoaffinity column cleanup liquid chromatography (LC) method for the determination of aflatoxin B1 and total aflatoxins at European regulatory limits. The test portion is extracted with methanol-water (8 + 2) for dried figs and paprika, and with methanol-water (8 + 2) plus hexane (or cyclohexane) for peanut butter and pistachios. The sample extract is filtered, diluted with phosphate buffer saline, and applied to an immunoaffinity column. The column is washed with water and the aflatoxins are eluted with methanol. Aflatoxins are quantitated by reversed-phase LC with post-column derivatization (PCD) involving bromination. PCD is achieved with either an electrochemical cell (Kobra cell) and addition of bromide to the mobile phase or pyridinium hydrobromide perbromide. Determination is by fluorescence. Peanut butter, pistachio paste, dried fig paste, and paprika powder samples, both naturally contaminated with aflatoxins and containing added aflatoxins, were sent to 16 collaborators in 16 European countries. Test portions of samples were spiked at levels of 2.4 and 9.6 ng/g for total aflatoxins which included 1.0 and 4.0 ng/g aflatoxin B1, respectively. Recoveries for total aflatoxins ranged from 71 to 92% with corresponding recoveries for aflatoxin B1 of 82 to 109%. Based on results for spiked samples (blind duplicates at 2 levels) as well as naturally contaminated samples (blind duplicates at 4 levels, including blank), the relative standard deviation for repeatability ranged from 4.6 to 23.3% for total aflatoxins and from 3.1 to 20.0% for aflatoxin B1. The relative standard deviation for reproducibility ranged from 14.1 to 34.2% for total aflatoxins, and from 9.1 to 32.2% for aflatoxin B1. The method showed acceptable within-laboratory and between-laboratory precision for all 4 matrixes, as evidenced by HORRAT values <1, at the low levels of determination for both total aflatoxins and aflatoxin B1.

Investigation of various extractants for the analysis of aflatoxin B1 in different food and feed matrices

Various extractants were investigated concerning their suitability for aflatoxin B1 determinations in different matrices including spices, infant formula and animal feed employing an immunoaffinity clean-up procedure. It was shown that the use of aqueous acetonitrile extractants was limited due to the fact that dry sample material can absorb significant amounts of water from the extractant. This can result in recoveries that are too high and therefore in incorrect values for the aflatoxin concentration if aliquots are taken for further analysis. A correction of the results by recovery calculation using spiked blank material is unsuitable, since material from the same group of food (e.g. paprika powder) or feed can vary significantly in the recovery values. Therefore it is recommended that aqueous methanol extractants are used, since no significant interaction with matrix constituents was observed. In addition, aqueous acetone extractants are a useful alternative with some limitations.

Thermodynamic and kinetic studies of silver ion complexes with cyclic and open chain diaza-polyethers including cryptands in acetonitrile + water mixtures

.The stability constants for Ag+ complexes of several diazapolyether ligands, L = (2,2,1), (2,1), (2,2) and (2) (Scheme 1), have been measured in acetonitrile and water mixtures. Rate constants for formation and dissociation of Ag(2,2,1)+, together with the free energies of transfer, ΔGtr, of (2,2,1) among the mixtures, are also reported, and are compared with corresponding values for the Ag+-(2,1,1) and Ag+-(2,2,2) systems. The solvent dependences of the stability constants and hence of ΔGtr(AgLCIO4) - AG,,(L) are almost identical for all systems, except for small differences at low water content between the behaviour of the bicyclic cryptand ligands [(2,2,2), (2,2,1), (2,1,1)] and the monocyclic and acylic ligands, attributable to effects of NH solvation in the latter group. The preferential solvation of Ag+ by acetonitrile in the mixtures results in a sharp decrease in the stability constants as acetonitrile is added to water, but the effect is partly compensated for by a corresponding decrease in the free energies of the complexes. A strong differentiation in the kinetic behaviour of the bicyclic cryptand ligands is observed. For (2,1,1) the formation rates are almost independent of solvent composition and the free energies of transfer of the activated complex, ΔG‡tr (Ag+. . .(2,1,1),ClO4-) closely parallels that of AgCIO4, whereas for the larger cryptands the formation rates show a stronger solvent dependence, and ΔG‡tr (Ag+. . .L,ClO4-) values much more closely resemble those of the stable complexes, ΔG‡tr (AgLClO4). It is suggested that for the smaller (2,1,1) ligand preferential solvation of Ag+ by acetonitrile still persists in the transition state, but that in the activated complex for (2,2,1) and (2,2,2) the strong interactions between Ag+ and the ligand nitrogens have already replaced the Ag+. . .N≡CCH3 interactions occurring for the uncomplexed Ag+ ion in the mixtures.