High Performance Liquid Chromatographic Determination of Carbohydrates in Chocolate: Collaborative Study

A collaborative study determining sucrose, glucose, fructose, maltose, and lactose in chocolate products was conducted using a previously published high performance liquid chromatographic (HPLC) method. Five samples (2 milk chocolates, 1 dark chocolate, 1 powdered mix, and 1 sirup) were analyzed in duplicate by 7 collaborators. The results indicate adequate method precision. In addition, the HPLC method allows for the simultaneous determination of 5 saccharides in chocolate products in 15 min. The method has been adopted as official first action.

Analysis of Milk-Based Infant Formula. Phase IV. Iodide, Linoleic Acid, and Vitamins D and K: U.S. Food and Drug Administration-Infant Formula Council: Collaborative Study

In 1982, the U.S. Food and Drug Administration, the Infant Formula Council and its member companies, contract laboratories, and other government laboratories began a study of analytical methods for the nutrients listed in the Infant Formula Act of 1980. Phases I, II, III, and V have been completed. The present report provides data on Phase IV, in which 13 laboratories collaboratively studied an ion-selective electrode method for analyzing iodide, a gas chromatographic method for linoleic acid, and 2 liquid chromatographic (LC) methods each for vitamins D and K. Data were insufficient to evaluate one each of the LC methods studied for vitamins K and D. The relative standard deviations (RSD) are sufficient for the nutrient levels found in infant formula. RSDs (%) for repeatability (RSDr) and reproducibility (RSDR), respectively, were as follows: iodide, 4.0-11.4 and 13.5-18.2; linoleic acid, 1.0-1.6 and 3.5-5.1; vitamin K1, 3.2-16.0 and 6.2-19.4; and vitamin D3,4.2 and 35.0. The recommendation to adopt the method for vitamin D was supported by the results of a ministudy. All laboratories were capable of using these methods with little training. The methods for determination of iodide, linoleic acid, and vitamins D and K in ready-to-feed milkbased infant formula have been adopted first action by AOAC International.

Determination of Total Dietary Fiber in Selected Foods Containing Resistant Maltodextrin by Enzymatic-Gravimetric Method and Liquid Chromatography: Collaborative Study

A method was developed for determination of total dietary fiber (TDF) in foods containing resistant maltodextrin (RMD) which includes nondigestible carbohydrates that are not fully recovered as dietary fiber by conventional TDF methods such as AOAC 985.29 or 991.43. Because the average molecular weight (MW) of RMD is 2000 daltons, lower MW soluble dietary fiber components do not precipitate in 78% ethanol; therefore, RMD is not completely quantitated as dietary fiber by current AOAC methods. The accuracy and precision of the method was evaluated through an AOAC collaborative study. Ten laboratories participated and assayed 12 test portions (6 blind duplicates) containing RMD. The 6 test pairs ranged from 1.5 to 100% RMD. The method consisted of the following steps: (1) The insoluble dietary fiber (IDF) and high MW soluble dietary fiber (HMWSDF) were determined by AOAC 985.29. (2) Ion exchange resins were used to remove salts and proteins contained in the AOAC 985.29 filtrates (including ethanol and acetone). (3) The amount of low MWRMD (LMWRMD) in the filtrates were determined by liquid chromatography. (4) The TDF was calculated by summation of the IDF, HMWSDF, and LMWRMD fractions having nondigestible carbohydrates with a degree of polymerization of 3 and higher. Repeatability standard deviations (RSDr) were 1.33–7.46%, calculated by including outliers, and 1.33–6.10%, calculated by not including outliers. Reproducibility standard deviations (RSDR) were 2.48–9.39%, calculated by including outliers, and 1.79–9.39%, calculated by not including outliers. This method is recommended for adoption as Official First Action.

Gas chromatographic determination of total fat extracted from food samples using hydrolysis in the presence of antioxidant

A method for the quantitative measurement of total fat in foodstuffs is described. Fat is extracted by hydrolysis and inter-esterified to fatty acid methyl esters for gas chromatographic analysis. Total fat and fatty acid patterns are calculated to comply with the regulations for food label declaration under the Nutrition Labeling and Education Act of 1990. Quantitative recovery of fat from soy oil is obtained in the presence of the antioxidant pyrogallol. Extraction and measurements of fat from a variety of food samples (e.g., cereal, baked goods, dairy, and fish) are also reported, and fat levels ranged from 0.8 to 95% (w/w). Coefficients of variation of < or = 5% demonstrate the efficiency of the method.

Determination of soluble dietary fiber in foods and food products: collaborative study

A collaborative study was conducted to determine the soluble dietary fiber (SDF) content of foods and food products by using a combination of enzymatic and gravimetric procedures. The method was basically the same as that employed for determining total dietary fiber (TDF), 985.29, and the method for insoluble dietary fiber (IDF), 991.42. Ten laboratories were each sent 13 test samples (6 blind duplicates and 1 standard [green beans] containing 29-33% TDF, 19-23% IDF, and 8-13% SDF) and were instructed to assay for IDF, SDF, and TDF independently. Included in the package were the 3 enzymes, namely alpha-amylase, amyloglucosidase, and protease, and the filter aid Celite, which was thought to be the major cause of high reproducibility relative standard deviation (RSDR) values for SDS obtained in a previous collaborative study. The foods to be analyzed were apricots, carrots, chickpeas, onions, raisins, and the sugar beet fiber Fibrex. IDF, TDF, and SDF were calculated as the weight of residue minus the weight of protein and ash on a dry weight basis. RSDR values of the IDF results averaged 8.02%, with only 1 food having an RSDR > 10%. The RSDR values for the TDF results averaged 4.97%, and all foods had an RSDR < 7%. Although the RSDR values for SDF averaged 14.17%, 4 of the 6 foods had an RSDR < 10%, and 1 of the 2 remaining foods that had a high RSDR had an SDF content of only 1.2%.(ABSTRACT TRUNCATED AT 250 WORDS)

Determination of insoluble, soluble, and total dietary fiber in foods and food products: interlaboratory study

A collaborative study was conducted to determine the insoluble dietary fiber (IDF), soluble dietary fiber (SDF), and total dietary fiber (TDF) content of food and food products by using a combination of enzymatic and gravimetric procedures. The method was basically the same as that developed for TDF only, which was adopted official final action by AOAC, except for changing the concentration of buffer and base and substituting hydrochloric acid for phosphoric acid. These changes were made to improve the robustness of the method. Duplicate blind samples of soy isolate, white wheat flour, rye bread, potatoes, rice, corn bran, oats, Fabulous Fiber, wheat bran, and a high fiber cereal were analyzed by 13 collaborators. Dietary fiber values (IDF, SDF, and TDF) were calculated as the weight of residue minus the weight of protein and ash. The coefficients of variation (CVs) of both the independent TDF determination and the sum of IDF and SDF were better than 15 and 18%, respectively, with the exception of rice and soy isolate. These 2 foods, however, contained only about 1% TDF. The CVs of the IDF were equally good, except for Fabulous Fiber, for which filtration problems occurred. The CVs for the SDF were somewhat high, but these products had very low SDF content. There was excellent agreement between the TDF determined independently and the TDF determined by summing the IDF and SDF. The method for separate determination of IDF and SDF requires further study. The modifications (changes in concentration of buffer and base and the use of hydrochloric acid instead of phosphoric acid) to the official final action method for TDF have been adopted.

Analysis for total sulfite in foods by using rapid distillation followed by redox titration

A rapid and accurate analysis for total sulfite as sulfur dioxide has been developed for foods and food products. The method, which combines a selective distillation cleanup procedure with the selective redox titration of sulfite ion by iodine, has been applied to a variety of foods and food products over a period of time with no significant interference encountered in any matrixes other than garlic and leeks. For the foods analyzed, the method typically shows a detection limit of 10 ppm, a relative standard deviation of 7.5% (compared with 10.4% for similar matrixes by the Monier-Williams method), and recoveries of 97.9 +/- 6.4%. Comparison of results for this method with those obtained using the Monier-Williams method showed a mean value for the distillation/titration method of 241 ppm compared with 242 ppm for the Monier-Williams method. A correlation of 0.991 and odds of a difference between methods of 10.7% (Student's paired t-test (1-alpha) X 100) were obtained for those matrixes where no interferences were encountered with either method.

Headspace gas chromatographic method for determination of methyl bromide in food ingredients

A headspace gas chromatographic (GC) method, which can be automated, has been developed for determination of methyl bromide. This method has been applied to wheat, flour, cocoa, and peanuts. Samples to be analyzed are placed in headspace sample vials, water is added, and the vials are sealed with Teflon-lined septa. After an appropriate equilibration time at 32 degrees C, the samples are analyzed within 10 h. A sample of the headspace is withdrawn and analyzed on a gas chromatograph equipped with an electron capture detector (ECD). Methyl bromide levels were quantitated by comparison of peak area with a standard. The standard was generated by adding a known amount of methyl bromide to a portion of the matrix being analyzed and which was known to be methyl bromide free. The detection limit of the method was 0.4 ppb. The coefficient of variation (CV) was 6.5% for wheat, 8.3% for flour, 3.3% for cocoa, and 11.6% for peanuts.

Improved codistillation method for determination of carbon tetrachloride, ethylene dichloride, and ethylene dibromide in grain and grain-based products

A method is described for the determination of the common fumigants carbon tetrachloride (CCl4), ethylene dichloride (EDC), and ethylene dibromide (EDB) in grain and grain-based products. A properly prepared sample is mixed with water and hexane, an internal standard mixture of 1,2-dichloropropane (DCP) and 1,2-dibromopropane (DBP) is added, and the fumigants are codistilled with the hexane into an appropriate receiver. After the hexane solution is dried over sodium sulfate, the quantities of fumigants present are quantitated on a gas chromatograph (GC) equipped with an electron capture detector (ECD). For the matrices investigated, the relative standard deviation of the method was 6.0, 9.7, and 23.1% for CCl4, EDC, and EDB, respectively. Recoveries of added fumigants were 107, 95, and 101%, respectively. Comparison with an acetone-water soak extraction method gave a correlation of 0.967 between methods for EDB with odds of a difference between methods of 35%.

Determination of total dietary fiber in foods and food products: collaborative study

A collaborative study was conducted to determine the total dietary fiber (TDF) content of food and food products, using a combination of enzymatic and gravimetric procedures. The method was basically the same as published earlier (J. Assoc. Off. Anal. Chem. (1984) 67, 1044-1052), with changes in the concentration of alcohol and buffers, time of incubation, sample preparation, and some explanatory notes, all with the intent of decreasing the coefficient of variation (CV) of the method. Duplicate blind samples of soy isolate, white wheat flour, rye bread, potatoes, rice, wheat bran, oats, corn bran, and whole wheat flour were analyzed by 9 collaborators. TDF was calculated as the weight of the residue minus the weight of protein and ash. CV values of the data from all laboratories for 7 of the samples ranged from 1.56 to 9.80%. The rice and soy isolate samples had CV values of 53.71% and 66.25%, respectively; however, each sample contained only about 1% TDF. The enzymatic-gravimetric method for determining TDF has been adopted official first action.

Short liquid chromatographic method for determination of zearalenone and alpha-zearalenol

A rapid method has been developed for the determination of zearalenone and alpha-zearalenol, using liquid-liquid partition for sample extract cleanup followed by liquid chromatography (LC) with fluorescence detection. The same extract can also be used for determination of aflatoxin by LC. Relative standard deviations for the method based on duplicate analyses are 4.18% for artificially contaminated samples and 13.92% for naturally contaminated samples. The method was compared with the AOAC method of extraction and column chromatography extract cleanup, using the same LC conditions for quantitation for both methods. Results showed a correlation coefficient of 0.990 with a mean zearalenone content by this method of 987.8 ppb, and 732.6 ppb by the official AOAC method. The detection limit of this method is 2.2 ppb for zearalenone and 1.5 ppb for alpha-zearalenol.

Determination of Aflatoxins in Peanut Butter, Using Two Liquid Chromatographic Methods: Collaborative Study

Two methods for determining aflatoxins in peanut butter, one using normal phase and the other reverse phase liquid chromatography (LC), were studied by 8 and 10 collaborators, respectively. Fluorescence detection was used for the determinative step in both methods. For reverse phase LC, aflatoxins B1 and G1 were converted to B2a and G2a; for normal phase LC, a silica gel-packed flow cell was placed in the irradiating light path of the detector. The samples included spiked and naturally contaminated peanut butter with total aflatoxin levels from about 5 to 20 ng/g and controls in a balanced pair design. For the normal phase LC method, recoveries of B1, B2, G1, and G2 from spiked samples averaged 79, 92, 74, and 88%, respectively; for the reverse phase method, the recoveries were 103, 104, 89, and 163%. For the normal phase LC method, pooled repeatabilities were 20, 23, 28, and 17% for B1, B2, G1, and G2, respectively; for the reverse phase method, the repeatabilities were 19, 22, 38, and 31%. For the normal phase method, pooled reproducibilities were 34, 33, 39, and 34% for B1, B2, G1, and G2, respectively; for the reverse phase method, the reproducibilities were 32, 46, 51, and 52%. Both methods show an improved limit of detection and better within-laboratory precision over current AOAC methods; however, between-laboratory precision is no better, and the reverse phase method shows evidence of interferences being measured. For these reasons and because of no benefits of present value, neither method was submitted for adoption as official first action.

Rapid determination of deoxynivalenol (vomitoxin) by liquid chromatography using modified Romer column cleanup

A modification of the Romer method for determining deoxynivalenol (DON) provides rapid sample cleanup and includes liquid chromatographic (LC) quantitation. The method was evaluated using wheat, wheat flour, and other wheat products. The sample is extracted with acetonitrile-water (84 + 16), and an aliquot of the extract is subjected to activated charcoal-alumina column chromatography. The extract is then evaporated and diluted to volume with mobile phase, and DON is quantitated using liquid chromatography. The relative standard deviation based on duplicate samples is 6.07%. The detection limit is 30 ppb based on 2 X signal/noise ratio. Results by this method compared with the results obtained by the Scott GC method showed a correlation coefficient of 0.992 with a mean vomitoxin content of 779 ppb by this method and 716 ppb by the Scott method for 14 samples.

Semiautomated fluorometric method for determination of vitamin C in foods: collaborative study

Continuous flow automation of the microfluorometric procedure compares favorably with the manual method in sensitivity, specificity, and generality, and reduces the cost of routine vitamin C assay. Fifteen samples of 12 different products of ready-to-eat cereals, fruit juices, and infant formula were sent to 6 collaborators; one sample in each category was sent as blind duplicates. The within-laboratory standard deviations for 5 collaborators on the 3 sets of blind duplicates were 1.23, 0.87, and 3.64 mg/100 g, respectively. Overall, the average relative standard deviation between laboratories was 11.1% (range 4.5-16.6%) for the manual method and 4.99% (range 1.5-12.6%) for the semiautomated method. The method has been adopted official first action.

Rapid high pressure liquid chromatographic determination of aflatoxin M1 in milk and nonfat dry milk

A modification of the current revised AOAC method, 26.A10-26.A15, is described for the rapid analysis of aflatoxin M1 in milk and nonfat dry milk. The method incorporates chloroform extraction and eliminates the need for column chromatography by using liquid-liquid partition for sample extract cleanup. Quantitation is carried out by using fluorescence detection combined with high pressure liquid chromatography (HPLC) of aflatoxin M1 which has been converted to aflatoxin M2a with trifluoroacetic acid. The method has a detection limit of 0.014 micrograms/L (2 X signal/noise) for whole milk. For 6 samples of naturally contaminated nonfat dry and freeze-dried milk, the modified method gave an average result of 0.698 micrograms/L; the AOAC method gave an average result of 0.386 micrograms/L.

Comparison of rapid high pressure liquid chromatographic and CB methods for determination of aflatoxins in corn and peanuts

A method is described for the rapid determination of aflatoxins in corn and peanut samples by high pressure liquid chromatography. The method was compared with the current CB method (AOAC 26.026). For 7 samples of corn and 14 samples of peanut meal and peanut butter, the correlation between methods is 0.991, and no significant difference exist between methods, using the Student's t-test at 15.7% alpha-risk.

High Pressure Liquid Chromatographic Determination of Theobromine and Caffeine in Cocoa and Chocolate Products: Collaborative Study

Four duplicate samples of cocoa-containing materials, a practice sample, and standards were submitted to the collaborators for theobromine and caffeine analysis by HPLC. In the method the samples are defatted with petroleum ether, and dried. The fat-free residue is then extracted with water and an aliquot is injected into the chromatograph. Compounds are quantitated by comparison with internal or external standards, either by peak height or peak area. Results for all the analyses showed that few of the values were more than 2 standard deviations from the mean. The method has been adopted as official first action.