Structure-dynamics correlations in composite PF127-PEG-based hydrogels; cohesive/hydrophobic interactions determine phase and rheology and identify the role of micelle concentration in controlling 3D extrusion printability

A library of composite polymer networks (CPNs) were formed by combining Pluronic F127, as the primary gelator, with a range of di-acrylate functionalised PEG polymers, which tune the rheological properties and provide UV crosslinkability. A coarse-grained sol-gel room temperature phase diagram was constructed for the CPN library, which identifies PEG-dependent disruption of micelles as leading to liquefication. Small angle X-ray scattering and rheological measurements provide detailed insight into; (i) micelle-micelle ordering; (ii) micelle-micelle disruption, and; (iii) acrylate-micelle disruption; with contributions that depend on composition, including weak PEG chain length and end group effects. The influence of composition on 3D extrusion printability through modulation of the cohesive/hydrophobic interactions was assessed. It was found that only micelle content provides consistent changes in printing fidelity, controlled largely by printing conditions (pressure and feed rate). Finally, the hydrogels were shown to be UV photo-crosslinkable, which further improves fidelity and structural integrity, and usefully reduces the mesh size. Our results provide a guide for design of 3D-printable CPN inks for future biomedical applications.

Magnetic Chitosan Bionanocomposite Films as A Versatile Platform for Biomedical Hyperthermia

Responsive magnetic nanomaterials offer significant advantages for innovative therapies, for instance in cancer treatments that exploit on-demand delivery on alternating magnetic field (AMF) stimulus. In this work, biocompatible magnetic bionanocomposite films are fabricated from chitosan by film casting with incorporation of magnetite nanoparticles (MNPs) produced by facile one pot synthesis. The influence of synthesis conditions and MNP concentration on the films heating efficiency and heat dissipation are evaluated, through spatio-temporally mapping of the surface temperature changes by video-thermography. The cast films have a thickness below 100 μm and upon exposure to AMF (663 kHz, 12.8 kA m-1 ) induce exceptionally strong heating, reaching a maximum temperature increase of 82°C within 270 s irradiation. Further, we demonstrate that the films can serve as substrates that supply heat for multiple hyperthermia scenarios, including: (i) non-contact automated heating of cell culture medium; (ii) heating of gelatine-based hydrogels of different shapes, and (iii) killing cancerous melanoma cells. The films are versatile components for non-contact stimulus with translational potential in multiple biomedical applications. This article is protected by copyright. All rights reserved.

Alginate microbeads and hydrogels delivering meropenem and bacteriophages to treat Pseudomonas aeruginosa fracture-related infections

Bacteriophage (phage) therapy has shown promise in treating fracture-related infection (FRI); however, questions remain regarding phage efficacy against biofilms, phage-antibiotic interaction, administration routes and dosing, and the development of phage resistance. The goal of this study was to develop a dual antibiotic-phage delivery system containing hydrogel and alginate microbeads loaded with a phage cocktail plus meropenem and evaluate efficacy against muti-drug resistant Pseudomonas aeruginosa. Two phages (FJK.R9-30 and MK.R3-15) displayed enhanced antibiotic activity against P. aeruginosa biofilms when tested in combination with meropenem. The antimicrobial activity of both antibiotic and phage was retained for eight days at 37 °C in dual phage and antibiotic loaded hydrogel with microbeads (PA-HM). In a mouse FRI model, phages were recovered from all tissues within all treatment groups receiving dual PA-HM. Moreover, animals that received the dual PA-HM either with or without systemic antibiotics had less incidence of phage resistance and less serum neutralization compared to phages in saline. The dual PA-HM could reduce bacterial load in soft tissue when combined with systemic antibiotics, although the infection was not eradicated. The use of alginate microbeads and injectable hydrogel for controlled release of phages and antibiotics, leads to the reduced development of phage resistance and lower exposure to the adaptive immune system, which highlights the translational potential of the dual PA-HM. However, further optimization of phage therapy and its delivery system is necessary to achieve higher bacterial killing activity in vivo in the future.

Micro/nano-patterns for enhancing differentiation of human neural stem cells and fabrication of nerve conduits via soft lithography and 3D printing

Topographical cues on materials can manipulate cellular fate, particularly for neural cells that respond well to such cues. Utilizing biomaterial surfaces with topographical features can effectively influence neuronal differentiation and promote neurite outgrowth. This is crucial for improving the regeneration of damaged neural tissue after injury. Here, we utilized groove patterns to create neural conduits that promote neural differentiation and axonal growth. We investigated the differentiation of human neural stem cells (NSCs) on silicon dioxide groove patterns with varying height-to-width/spacing ratios. We hypothesize that NSCs can sense the microgrooves with nanoscale depth on different aspect ratio substrates and exhibit different morphologies and differentiation fate. A comprehensive approach was employed, analyzing cell morphology, neurite length, and cell-specific markers. These aspects provided insights into the behavior of the investigated NSCs and their response to the topographical cues. Three groove-pattern models were designed with varying height-to-width/spacing ratios of 80, 42, and 30 for groove pattern widths of 1 μm, 5 μm, and 10 μm and nanoheights of 80 nm, 210 nm, and 280 nm. Smaller groove patterns led to longer neurites and more effective differentiation towards neurons, whereas larger patterns promoted multidimensional differentiation towards both neurons and glia. We transferred these cues onto patterned polycaprolactone (PCL) and PCL-graphene oxide (PCL-GO) composite 'stamps' using simple soft lithography and reproducible extrusion 3D printing methods. The patterned scaffolds elicited a response from NSCs comparable to that of silicon dioxide groove patterns. The smallest pattern stimulated the highest neurite outgrowth, while the middle-sized grooves of PCL-GO induced effective synaptogenesis. We demonstrated the potential for such structures to be wrapped into tubes and used as grafts for peripheral nerve regeneration. Grooved PCL and PCL-GO conduits could be a promising alternative to nerve grafting.

An In Vitro and Ex Vivo Analysis of the Potential of GelMA Hydrogels as a Therapeutic Platform for Preclinical Spinal Cord Injury

Spinal cord injury (SCI) is a devastating condition with no curative therapy currently available. Immunomodulation can be applied as a therapeutic strategy to drive alternative immune cell activation and promote a proregenerative injury microenvironment. Locally injected hydrogels carrying immunotherapeutic cargo directly to injured tissue offer an encouraging treatment approach from an immunopharmacological perspective. Gelatin methacrylate (GelMA) hydrogels are promising in this regard, however, detailed analysis on the immunogenicity of GelMA in the specific context of the SCI microenvironment is lacking. Here, the immunogenicity of GelMA hydrogels formulated with a translationally relevant photoinitiator is analyzed in vitro and ex vivo. 3% (w/v) GelMA, synthesized from gelatin type-A, is first identified as the optimal hydrogel formulation based on mechanical properties and cytocompatibility. Additionally, 3% GelMA-A does not alter the expression profile of key polarization markers in BV2 microglia or RAW264.7 macrophages after 48 h. Finally, it is shown for the first time that 3% GelMA-A can support the ex vivo culture of primary murine organotypic spinal cord slices for 14 days with no direct effect on glial fibrillary acidic protein (GFAP+ ) astrocyte or ionized calcium-binding adaptor molecule 1 (Iba-1+ ) microglia reactivity. This provides evidence that GelMA hydrogels can act as an immunotherapeutic hydrogel-based platform for preclinical SCI.

Versatile Potential of Photo-Cross-Linkable Silk Fibroin: Roadmap from Chemical Processing Toward Regenerative Medicine and Biofabrication Applications

Over the past two decades, hydrogels have come to the forefront of tissue engineering and regenerative medicine due to their biocompatibility, tunable degradation and low immunogenicity. Due to their porosity and polymeric network built up, it is possible to incorporate inside drugs, bioactive molecules, or other biochemically active monomers. Among biopolymers used for the fabrication of functional hydrogels, silk fibroin (SF) has received considerable research attention owing to its known biocompatibility and tunable range of mechanical properties. However, its relatively simple structure limits the potential usability. One of the emerging strategies is a chemical functionalization of SF, allowing for the introduction of methacrylate groups. This allows the versatile processing capability, including photo-cross-linking, which makes SF a useful polymer as a bioink for 3D printing. The methacrylation reaction has been done using numerous monomers such as methacrylic anhydride (MA), 2-isocyanatoethyl methacrylate (IEM), or glycidyl methacrylate (GMA). In this Review, we summarize the chemical functionalization strategies of SF materials and their resulting physicochemical properties. More specifically, a brief explanation of the different functionalization methods, the cross-linking principles, possibilities, and limitations of methacrylate compound functionalization are provided. In addition, we describe types of functional SF hydrogels and link their design principles to the performance in applications in the broad fields of biofabrication, tissue engineering, and regenerative medicine. We anticipate that the provided guidelines will contribute to the future development of SF hydrogels and their composites by providing the rational design of new mechanisms linked to the successful realization of targeted biomedical application.

A continuum mechanical porous media model for vertebroplasty: Numerical simulations and experimental validation

The outcome of vertebroplasty is hard to predict due to its dependence on complex factors like bone cement and marrow rheologies. Cement leakage could occur if the procedure is done incorrectly, potentially causing adverse complications. A reliable simulation could predict the patient-specific outcome preoperatively and avoid the risk of cement leakage. Therefore, the aim of this work was to introduce a computationally feasible and experimentally validated model for simulating vertebroplasty. The developed model is a multiphase continuum-mechanical macro-scale model based on the Theory of Porous Media. The related governing equations were discretized using a combined finite element-finite volume approach by the so-called Box discretization. Three different rheological upscaling methods were used to compare and determine the most suitable approach for this application. For validation, a benchmark experiment was set up and simulated using the model. The influence of bone marrow and parameters like permeability, porosity, etc., was investigated to study the effect of varying conditions on vertebroplasty. The presented model could realistically simulate the injection of bone cement in porous materials when used with the correct rheological upscaling models, of which the semi-analytical averaging of the viscosity gave the best results. The marrow viscosity is identified as the crucial reference to categorize bone cements as 'high- 'or 'low-' viscosity in the context of vertebroplasty. It is confirmed that a cement with higher viscosity than the marrow ensures stable development of the injection and a proper cement interdigitation inside the vertebra.

Growth and differentiation of human induced pluripotent stem cell (hiPSC)-derived kidney organoids using fully synthetic peptide hydrogels

Human induced pluripotent stem cell (hiPSC)-derived kidney organoids have prospective applications ranging from basic disease modelling to personalised medicine. However, there remains a necessity to refine the biophysical and biochemical parameters that govern kidney organoid formation. Differentiation within fully-controllable and physiologically relevant 3D growth environments will be critical to improving organoid reproducibility and maturation. Here, we matured hiPSC-derived kidney organoids within fully synthetic self-assembling peptide hydrogels (SAPHs) of variable stiffness (storage modulus, G'). The resulting organoids contained complex structures comparable to those differentiated within the animal-derived matrix, Matrigel. Single-cell RNA sequencing (scRNA-seq) was then used to compare organoids matured within SAPHs to those grown within Matrigel or at the air-liquid interface. A total of 13,179 cells were analysed, revealing 14 distinct clusters. Organoid compositional analysis revealed a larger proportion of nephron cell types within Transwell-derived organoids, while SAPH-derived organoids were enriched for stromal-associated cell populations. Notably, differentiation within a higher G' SAPH generated podocytes with more mature gene expression profiles. Additionally, maturation within a 3D microenvironment significantly reduced the derivation of off-target cell types, which are a known limitation of current kidney organoid protocols. This work demonstrates the utility of synthetic peptide-based hydrogels with a defined stiffness, as a minimally complex microenvironment for the selected differentiation of kidney organoids.

Emerging Magnetic Fabrication Technologies Provide Controllable Hierarchically-Structured Biomaterials and Stimulus Response for Biomedical Applications

Multifunctional nanocomposites which exhibit well-defined physical properties and encode spatiotemporally-controlled responses are emerging as components for advanced responsive systems. For biomedical applications magnetic nanocomposite materials have attracted significant attention due to their ability to respond to spatially and temporally varying magnetic fields. The current state-of-the-art in development and fabrication of magnetic hydrogels toward biomedical applications is described. There is accelerating progress in the field due to advances in manufacturing capabilities. Three categories can be identified: i) Magnetic hydrogelation, DC magnetic fields are used during solidification/gelation for aligning particles; ii) additive manufacturing of magnetic materials, 3D printing technologies are used to develop spatially-encoded magnetic properties, and more recently; iii) magnetic additive manufacturing, magnetic responses are applied during the printing process to develop increasingly complex structural arrangement that may recapitulate anisotropic tissue structure and function. The magnetic responsiveness of conventionally and additively manufactured magnetic hydrogels are described along with recent advances in soft magnetic robotics, and the categorization is related to final architecture and emergent properties. Future challenges and opportunities, including the anticipated role of combinatorial approaches in developing 4D-responsive functional materials for tackling long-standing problems in biomedicine including production of 3D-specified responsive cell scaffolds are discussed.

Controlling Doxorubicin Release from a Peptide Hydrogel through Fine-Tuning of Drug-Peptide Fiber Interactions

Hydrogels are versatile materials that have emerged in the last few decades as promising candidates for a range of applications in the biomedical field, from tissue engineering and regenerative medicine to controlled drug delivery. In the drug delivery field, in particular, they have been the subject of significant interest for the spatially and temporally controlled delivery of anticancer drugs and therapeutics. Self-assembling peptide-based hydrogels, in particular, have recently come to the fore as potential candidate vehicles for the delivery of a range of drugs. In order to explore how drug–peptide interactions influence doxorubicin (Dox) release, five β-sheet-forming self-assembling peptides with different physicochemical properties were used for the purpose of this study, namely: FEFKFEFK (F8), FKFEFKFK (FK), FEFEFKFE (FE), FEFKFEFKK (F8K), and KFEFKFEFKK (KF8K) (F: phenylalanine; E: glutamic acid; K: lysine). First, Dox-loaded hydrogels were characterized to ensure that the incorporation of the drug did not significantly affect the hydrogel properties. Subsequently, Dox diffusion out of the hydrogels was investigated using UV absorbance. The amount of drug retained in F8/FE composite hydrogels was found to be directly proportional to the amount of charge carried by the peptide fibers. When cation−π interactions were used, the position and number of end-lysine were found to play a key role in the retention of Dox. In this case, the amount of Dox retained in F8/KF8K composite hydrogels was linked to the amount of end-lysine introduced, and an end-lysine/Dox interaction stoichiometry of 3/1 was obtained. For pure FE and KF8K hydrogels, the maximum amount of Dox retained was also found to be related to the overall concentration of the hydrogels and, therefore, to the overall fiber surface area available for interaction with the drug. For 14 mM hydrogel, ∼170–200 μM Dox could be retained after 24 h. This set of peptides also showed a broad range of susceptibilities to enzymatic degradation opening the prospect of being able to control also the rate of degradation of these hydrogels. Finally, the Dox released from the hydrogel was shown to be active and affect 3T3 mouse fibroblasts viability in vitro. Our study clearly shows the potential of this peptide design as a platform for the formulation of injectable or sprayable hydrogels for controlled drug delivery.

Hierarchical porous metal–organic gels and derived materials: from fundamentals to potential applications

This review summarizes recent progress in the development and applications of metal–organic gels (MOGs) and their hybrids and derivatives dividing them into subclasses and discussing their synthesis, design and structure–property relationship.

Graphene oxide modulates inter-particle interactions in 3D printable soft nanocomposite hydrogels restoring magnetic hyperthermia responses

Hydrogels loaded with magnetic iron oxide nanoparticles that can be patterned and which controllably induce hyperthermic responses on AC-field stimulation are of interest as functional components of next-generation biomaterials. Formation of nanocomposite hydrogels is known to eliminate any Brownian contribution to hyperthermic response (reducing stimulated heating) while the Néel contribution can also be suppressed by inter-particle dipolar interactions arising from aggregation induced before or during gelation. We describe the ability of graphene oxide (GO) flakes to restore the hyperthermic efficiency of soft printable hydrogels formed using Pluronics F127 and PEGylated magnetic nanoflowers. Here, by varying the amount of GO in mixed nanocomposite suspensions and gels, we demonstrate GO-content dependent recovery of hyperthemic response in gels. This is due to progressively reduced inter-nanoflower interactions mediated by GO, which largely restore the dispersed-state Néel contribution to heating. We suggest that preferential association of GO with the hydrophobic F127 blocks increases the preponderance of cohesive interactions between the hydrophilic blocks and the PEGylated nanoflowers, promoting dispersion of the latter. Finally we demonstrate extrusion-based 3D printing with excellent print fidelity of the magnetically-responsive nanocomposites, for which the inclusion of GO provides significant improvement in the spatially-localized open-coil heating response, rendering the prints viable components for future cell stimulation and delivery applications.

Functional hydrogels as therapeutic tools for spinal cord injury: New perspectives on immunopharmacological interventions

Spinal cord injury (SCI) is a complex medical and psychological challenge for which there is no curative therapy currently available. Despite major progress in pharmacological and surgical approaches, clinical trials for SCI patients have been uniformly disappointing thus far as there are many practical and biological issues yet to be resolved. Neuroinflammation is a critical event of the secondary injury phase after SCI, and recent research strategies have focused on modulating the immune response after injury to provide a more favorable recovery environment. Biomaterials can serve this purpose by providing physical and trophic support to the injured spinal cord after SCI. Of all potential biomaterials, functional hydrogels are emerging as a key component in novel treatment strategies for SCI, including controlled and localized delivery of immunomodulatory therapies to drive polarization of immune cells towards a pro-regenerative phenotype. Here, we extensively review recent developments in the use of functional hydrogels as immunomodulatory therapies for SCI. We briefly describe physicochemical properties of hydrogels and demonstrate how advanced fabrication methods lead to the required heterogeneity and hierarchical arrangements that increasingly mimic complex spinal cord tissue. We then summarize potential SCI therapeutic modalities including: (i) hydrogels alone; (ii) hydrogels as cellular or (iii) bioactive molecule delivery vehicles, and; (iv) combinatorial approaches. By linking the structural properties of hydrogels to their functions in treatment with particular focus on immunopharmacological stimuli, this may accelerate further development of functional hydrogels for SCI, and indeed next-generation central nervous system regenerative therapies.

Spatiotemporally Resolved Heat Dissipation in 3D Patterned Magnetically Responsive Hydrogels

Multifunctional nanocomposites that exhibit well-defined physical properties and encode spatiotemporally controlled responses are emerging as components for advanced responsive systems, for example, in soft robotics or drug delivery. Here an example of such a system, based on simple magnetic hydrogels composed of iron oxide magnetic nanoflowers and Pluronic F127 that generates heat upon alternating magnetic field irradiation is described. Rules for heat-induction in bulk hydrogels and the heat-dependence on particle concentration, gel volume, and gel exposed surface area are established, and the dependence on external environmental conditions in "closed" as compared to "open" (cell culture) system, with controllable heat jumps, of ∆T 0-12°C, achieved within ≤10 min and maintained described. Furthermore the use of extrusion-based 3D printing for manipulating the spatial distribution of heat in well-defined printed features with spatial resolution <150 µm, sufficiently fine to be of relevance to tissue engineering, is presented. Finally, localized heat induction in printed magnetic hydrogels is demonstrated through spatiotemporally-controlled release of molecules (in this case the dye methylene blue). The study establishes hitherto unobserved control over combined spatial and temporal induction of heat, the applications of which in developing responsive scaffold remodeling and cargo release for applications in regenerative medicine are discussed.

Current concepts for tissue transplant services for developing countries

The transplantation of tissues can save lives and re-establish vital functions, where no alternatives of comparable effectiveness exist. This has led to establishment of tissue transplantation as a successful practice worldwide; however, a great variability between countries remains in terms of donation levels, safety, quality of grafts and their efficacy. Tissue transplantation requires coordination of different agencies involved in the implementation of procurement, processing, storage and distribution of tissues and cells from different hospital units that perform surgical procedures with graft-type input requirements. This biomaterial-like requirement has led to the constant development of the area and today these graft products of human origin can be the starting point for new and more advanced biotechnological products. For long-term sustainability and successful transplantation units, a process management comparable to the pharmaceutical industry in terms of quality management systems must be established to produce safe and high-quality human-derived products. This review aims to update the current concepts of tissue transplant services for its application for developing countries using the current Chilean scenario as a case study. We summarize our findings proposing a set of guidelines/actions that should be followed to ensure smooth tissue transplant services implementations with high efficiency and safe use.

Unique cellular network formation guided by heterostructures based on reduced graphene oxide - Ti3C2Tx MXene hydrogels

Two-dimensional (2D) materials remain highly interesting for assembling three-dimensional (3D) structures, amongst others, in the form of macroscopic hydrogels. Herein, we present a novel approach for inducing chemical inter-sheet crosslinks via an ethylenediamine mediated reaction between Ti₃C₂T_x and graphene oxide in order to obtain a reduced graphene oxide-MXene (rGO-MXene) hydrogel. The composite hydrogels are hydrophilic with a stiffness of ~20 kPa. They also possess a unique inter-connected porous architecture, which led to a hitherto unprecedented ability of human cells across three different types, epithelial adenocarcinoma, neuroblastoma and fibroblasts, to form inter-connected three-dimensional networks. The attachments of the cells to the rGO-MXene hydrogels were superior to those of the sole rGO-control gels. This phenomenon stems from the strong affinity of cellular protrusions (neurites, lamellipodia and filopodia) to grow and connect along architectural network paths within the rGO-MXene hydrogel, which could lead to advanced control over macroscopic formations of cellular networks for technologically relevant bioengineering applications, including tissue engineering and personalized diagnostic networks-on-chip. STATEMENT OF SIGNIFICANCE: Conventional hydrogels are made of interconnected polymeric fibres. Unlike conventional case, we used hydrothermal and chemical approach to form interconnected porous hydrogels made of two-dimensional flakes from graphene oxide and metal carbide from a new family of MXenes (Ti₃C₂T_x). This way, we formed three-dimensional porous hydrogels with unique porous architecture of well-suited chemical surfaces and stiffness. Cells from three different types cultured on these scaffolds formed extended three-dimensional networks - a feature of extended cellular proliferation and pre-requisite for formation of organoids. Considering the studied 2D materials typically constitute materials exhibiting enhanced supercapacitor performances, our study points towards better understanding of design of tissue engineering materials for the future bioengineering fields including personalized diagnostic networks-on-chip, such as artificial heart actuators.

Tuning Properties of Partially Reduced Graphene Oxide Fibers upon Calcium Doping

The arrangement of two-dimensional graphene oxide sheets has been shown to influence physico-chemical properties of the final bulk structures. In particular, various graphene oxide microfibers remain of high interest in electronic applications due to their wire-like thin shapes and the ease of hydrothermal fabrication. In this research, we induced the internal ordering of graphene oxide flakes during typical hydrothermal fabrication via doping with Calcium ions (~6 wt.%) from the capillaries. The Ca2+ ions allowed for better graphene oxide flake connections formation during the hydrogelation and further modified the magnetic and electric properties of structures compared to previously studied aerogels. Moreover, we observed the unique pseudo-porous fiber structure and flakes connections perpendicular to the long fiber axis. Pulsed electron paramagnetic resonance (EPR) and conductivity measurements confirmed the denser flake ordering compared to previously studied aerogels. These studies ultimately suggest that doping graphene oxide with Ca2+ (or other) ions during hydrothermal methods could be used to better control the internal architecture and thus tune the properties of the formed structures.

Unraveling Origins of EPR Spectrum in Graphene Oxide Quantum Dots

Carbon nanostructures are utilized in a plethora of applications ranging from biomedicine to electronics. Particularly interesting are carbon nanostructured quantum dots that can be simultaneously used for bimodal therapies with both targeting and imaging capabilities. Here, magnetic and optical properties of graphene oxide quantum dots (GOQDs) prepared by the top-down technique from graphene oxide and obtained using the Hummers' method were studied. Graphene oxide was ultra-sonicated, boiled in HNO3, ultra-centrifuged, and finally filtrated, reaching a mean flake size of ~30 nm with quantum dot properties. Flake size distributions were obtained from scanning electron microscopy (SEM) images after consecutive preparation steps. Energy-dispersive X-ray (EDX) confirmed that GOQDs were still oxidized after the fabrication procedure. Magnetic and photoluminescence measurements performed on the obtained GOQDs revealed their paramagnetic behavior and broad range optical photoluminescence around 500 nm, with magnetic moments of 2.41 µB. Finally, electron paramagnetic resonance (EPR) was used to separate the unforeseen contributions and typically not taken into account metal contaminations, and radicals from carbon defects. This study contributes to a better understanding of magnetic properties of carbon nanostructures, which could in the future be used for the design of multimodal imaging agents.

Fabricating versatile cell supports from nano- and micro-sized graphene oxide flakes

Micro-sized structures made from graphene oxide (GO) attract high interest for their extensive use in tissue engineering. The fabrication and cytotoxicity of 3D graphene-based scaffolds so far have not been extensively discussed with relation to the flake sizes used. In this work we considered GO flakes of two different lognormal size distributions (GO: 4.9 ± 3.8 μm and GO 1 h: 151.6 ± 1.9 nm) as model flakes for fabrication of 3D graphene-based cell culture supports: paper (i.e. 3D layered film structure) and reduced graphene oxide (rGO) microfiber using hydrothermal methods. We then used two model cell lines of neuronal origin (SH-SY5Y and HEK-293) to study subsequent scaffolds surface-cells interactions. In particular, the adhesion of HEK cells to the formed structures was much higher than for SH-SY5Y cells, as evidenced by various atomic force, electron and optical microscopy techniques. Formed rGO microfibers had more desired nano-topography (surface roughness) for cell adhesion and growth than simple GO paper, making it ideal scaffold for neural tissue engineering. This work provides insights into the fundamental rules for fabrication of graphene oxide-based cell supports and their subsequently differing interactions with malignant and non-malignant cells.

UV cross-linked polyvinylpyrrolidone electrospun fibres as antibacterial surfaces

Many bacteria become progressively more resistant to antibiotics and it remains a challenging task to control their overall levels. Polymers combined with active biomolecules come to the forefront for the design of antibacterial materials that can address this encounter. In this work, we investigated the photo-crosslinking approach of UV-sensitive benzophenone molecule (BP) with polyvinylpyrrolidone (PVP) polymer within electrospun fibres. The BP and PVP solutions allowed fabricating polymer mats that were subsequently functionalised with antibacterial lysozyme. The physical properties of the crosslinked electrospun fibres were investigated by scanning electron microscopy and atomic force microscopy. The average diameter of the obtained fibres decreased from 290 ± 50 nm to 270 ± 70 nm upon the addition of the crosslinking molecules and then to 240 ± 80 nm and 180 ± 90 nm after subsequent crosslinking reaction at an increasing time: 3 and 5 h, respectively. The peak force quantitative nanomechanical mapping (PF-QNM) indicated the increase of DMT modulus of obtained cross-linked fibres from 4.1 ± 0.8 GPa to 7.2 ± 0.5 GPa. Furthermore, the successful crosslinking reaction of PVP and BP solution into hydrogels was investigated in terms of examining photo-crosslinking mechanism and was confirmed by rheology, Raman, Fourier transform infrared and nuclear magnetic resonance. Finally, lysozyme was successfully encapsulated within cross-linked PVP-BP hydrogels and these were successfully electrospun into mats which were found to be as effective antibacterial agents as pure lysozyme molecules. The dissolution rate of photo cross-linked PVP mats was observed to increase in comparison to pure PVP electrospun mats which opened a potential route for their use as antibacterial, on-demand, dissolvable coatings for various biomedical applications.

Graphene oxide containing self-assembling peptide hybrid hydrogels as a potential 3D injectable cell delivery platform for intervertebral disc repair applications

Cell-based therapies have shown significant promise in tissue engineering with one key challenge being the delivery and retention of cells. As a result, significant efforts have been made in the past decade to design injectable biomaterials to host and deliver cells at injury sites. Intervertebral disc (IVD) degeneration, a major cause of back pain, is a particularly relevant example where a minimally-invasive cellular therapy could bring significant benefits specifically at the early stages of the disease, when a cell-driven process starts in the gelatinous core of the IVD, the nucleus pulposus (NP).

In this present study we explore the use of graphene oxide (GO) as nano-filler for the reinforcement of FEFKFEFK (β-sheet forming self-assembling peptide) hydrogels. Our results confirm the presence of strong interactions between FEFKFEFK and GO flakes with the peptide coating and forming short thin fibrils on the surface of the flakes. These strong interactions were found to affect the bulk properties of hybrid hydrogels. At pH 4 electrostatic interactions between the peptide fibres and the peptide-coated GO flakes are thought to govern the final bulk properties of the hydrogels while at pH 7, after conditioning with cell culture media, electrostatic interactions are removed leaving the hydrophobic interactions to govern hydrogel final properties. The GO-F820 hybrid hydrogel, with mechanical properties similar to the NP, was shown to promote high cell viability and retained cell metabolic activity in 3D over the 7 days of culture and therefore shown to harbour significant potential as an injectable hydrogel scaffold for the in-vivo delivery of NP cells.

Statement of Significance

Short self-assembling peptide hydrogels (SAPHs) have attracted significant interest in recent years as they can mimic the natural extra-cellular matrix, holding significant promise for the ab initio design of cells’ microenvironments. Recently the design of hybrid hydrogels for biomedical applications has been explored through the incorporation of specific nanofillers. In this study we exploited graphene oxide (GO) as nanofiller to design hybrid injectable 3Dscaffolds for the delivery of nucleus pulposus cells (NPCs) for intervertebral disc regeneration. Our work clearly shows the presence of strong interactions between peptide and GO, mimicking the mechanical properties of the NP tissue and promoting high cell viability and metabolic activity. These hybrid hydrogels therefore harbour significant potential as injectable scaffolds for the in vivo delivery of NPCs.

The UCD nanosafety workshop (03 December 2018): towards developing a consensus on safe handling of nanomaterials within the Irish university labs and beyond - a report

Careful handling of the nanomaterials (NMs) in research labs is crucial to ensure a safe working environment. As the largest university in Ireland, University College Dublin (UCD) has invested significant resources to update researchers working with NMs. Due to sizes often <100 nm, the NMs including nanoparticles, harbor unprecedented materialistic properties, for example, enhanced reactivity, conductivity, fluorescence, etc. which albeit conferring the NMs an edge over bulk materials regarding the applied aspects; depending on the dose, also render them to be toxic. Thus, a set of regulatory guidelines have emerged regarding safe handling of the NMs within occupational set-ups. Unfortunately, the current regulations based on the toxic chemicals and carcinogens are often confusing, lack clarity, and difficult to apply for the NMs. As a research-intensive university, a diverse range of research activities occur within the UCD labs, and it is difficult, at times impossible, for the UCD Safety, Insurance, Operational Risk & Compliance (SIRC) office to develop a set of common guidelines and cater throughout all its labs conducting research with the NMs. Hence, a necessity for dialog and exchange of ideas was felt across the UCD which encouraged the researchers including early stage researchers (e.g. PhDs, Postdocs) from multiple schools to participate in a workshop held on the 03 December 2018. The workshop tried to follow a pragmatic approach, where apart from discussing both the in vitro and in vivo scenarios, practical cases simulating situations faced frequently in the labs were discussed. This report summarizes the findings made during the workshop by this emerging critical mass in UCD.

Biomedical Applications of Graphene-Based Structures

Graphene and graphene oxide (GO) structures and their reduced forms, e.g., GO paper and partially or fully reduced three-dimensional (3D) aerogels, are at the forefront of materials design for extensive biomedical applications that allow for the proliferation and differentiation/maturation of cells, drug delivery, and anticancer therapies. Various viability tests that have been conducted in vitro on human cells and in vivo on mice reveal very promising results, which make graphene-based materials suitable for real-life applications. In this review, we will give an overview of the latest studies that utilize graphene-based structures and their composites in biological applications and show how the biomimetic behavior of these materials can be a step forward in bridging the gap between nature and synthetically designed graphene-based nanomaterials.

Designing Peptide/Graphene Hybrid Hydrogels through Fine-Tuning of Molecular Interactions

A recent strategy that has emerged for the design of increasingly functional hydrogels is the incorporation of nanofillers in order to exploit their specific properties to either modify the performance of the hydrogel or add functionality. The emergence of carbon nanomaterials in particular has provided great opportunity for the use of graphene derivatives (GDs) in biomedical applications. The key challenge when designing hybrid materials is the understanding of the molecular interactions between the matrix (peptide nanofibers) and the nanofiller (here GDs) and how these affect the final properties of the bulk material. For the purpose of this work, three gelling β-sheet-forming, self-assembling peptides with varying physiochemical properties and five GDs with varying surface chemistries were chosen to formulate novel hybrid hydrogels. First the peptide hydrogels and the GDs were characterized; subsequently, the molecular interaction between peptides nanofibers and GDs were probed before formulating and mechanically characterizing the hybrid hydrogels. We show how the interplay between electrostatic interactions, which can be attractive or repulsive, and hydrophobic (and π-π in the case of peptide containing phenylalanine) interactions, which are always attractive, play a key role on the final properties of the hybrid hydrogels. The shear modulus of the hydrid hydrogels is shown to be related to the strength of fiber adhesion to the flakes, the overall hydrophobicity of the peptides, as well as the type of fibrillar network formed. Finally, the cytotoxicity of the hybrid hydrogel formed at pH 6 was also investigated by encapsulating and culturing human mesemchymal stem cells (hMSC) over 14 days. This work clearly shows how interactions between peptides and GDs can be used to tailor the mechanical properties of the resulting hydrogels, allowing the incorporation of GD nanofillers in a controlled way and opening the possibility to exploit their intrinsic properties to design novel hybrid peptide hydrogels for biomedical applications.