Preparation of activated carbon from Tunisian olive-waste cakes and its application for adsorption of heavy metal ions

The present work explored the use of Tunisian olive-waste cakes, a by-product of the manufacture process of olive oil in mills, as a potential feedstock for the preparation of activated carbon. Chemical activation of this precursor, using phosphoric acid as dehydrating agent, was adopted. To optimize the preparation method, the effect of the main process parameters (such as acid concentration, impregnation ratio, temperature of pyrolysis step) on the performances of the obtained activated carbons (expressed in terms of iodine and methylene blue numbers and specific surface area) was studied. The optimal activated carbon was fully characterized considering its adsorption properties as well as its chemical structure and morphology. To enhance the adsorption capacity of this carbon for heavy metals, a modification of the chemical characteristics of the sorbent surface was performed, using KMnO(4) as oxidant. The efficiency of this treatment was evaluated considering the adsorption of Cu(2+) ions as a model for metallic species. Column adsorption tests showed the high capacity of the activated carbon to reduce KMnO(4) into insoluble manganese (IV) oxide (MnO(2)) which impregnated the sorbent surface. The results indicated also that copper uptake capacity was enhanced by a factor of up to 3 for the permanganate-treated activated carbon.

Heavy metal removal from aqueous solutions by activated phosphate rock

The use of natural adsorbent such as phosphate rock to replace expensive imported synthetic adsorbent is particularly appropriate for developing countries such as Tunisia. In this study, the removal characteristics of lead, cadmium, copper and zinc ions from aqueous solution by activated phosphate rock were investigated under various operating variables like contact time, solution pH, initial metal concentration and temperature. The kinetic and the sorption process of these metal ions were compared for phosphate rock (PR) and activated phosphate rock (APR). To accomplish this objective we have: (a) characterized both (PR) and (APR) using different techniques (XRD, IR) and analyses (EDAX, BET-N(2)); and, (b) qualified and quantified the interaction of Pb(2+), Cd(2+), Cu(2+) and Zn(2+) with these sorbents through batch experiments. Initial uptake of these metal ions increases with time up to 1h for (PR) and 2h for (APR), after then, it reaches equilibrium. The maximum sorption obtained for (PR) and (APR) is between pH 2 and 3 for Pb(2+) and 4 and 6 for Cd(2+), Cu(2+) and Zn(2+). The effect of temperature has been carried out at 10, 20 and 40 degrees C. The data obtained from sorption isotherms of metal ions at different temperatures fit to linear form of Langmuir sorption equation. The heat of sorption (DeltaH degrees), free energy (DeltaG degrees) and change in entropy (DeltaS degrees) were calculated. They show that sorption of Pb(2+), Cd(2+), Cu(2+) and Zn(2+) on (PR) and (APR) an endothermic process. These findings are significant for future using of (APR) for the removal of heavy metal ions from wastewater under realistic competitive conditions in terms of initial heavy metals, concentrations and pH.

Phosphorus removal from aqueous solution using iron coated natural and engineered sorbents

New filtration materials covered with metallic oxides are good adsorbents for both cation and anion forms of pollutants. Sfax is one of the most important industrial towns in Tunisia. Its phosphate manufacture in particular is causing considerable amounts of water pollution. Therefore, there is a need to find out a new way of getting rid of this excessive phosphate from water. This work is aimed to examining the potential of three sorbent materials (synthetic iron oxide coated sand (SCS), naturally iron oxide coated sand (NCS) and iron oxide coated crushed brick (CB)) for removing phosphate ions from aqueous solutions. According to our literature survey CB was not used as adsorbent previously. Phosphate ions are used here as species model for the elimination of other similar pollutants (arsenates, antimonates). Optical microscope and scanning electron microscope (SEM) analyses were used to investigate the surface properties and morphology of the coated sorbents. Infra-red spectroscopy and X-ray diffraction techniques were also used to characterize the sorbent structures. Results showed that iron coated crushed brick possess more micro pores and a higher surface area owing to its clay nature. The comparative sorption of PO4(3-) from aqueous solutions by SCS, CB and NCS was investigated by batch experiments. The estimated optimum pH of phosphate ion retention for the considered sorbents was 5. The equilibrium data were analysed using the Langmuir and Freundlich isotherms. The sorption capacities of PO(4)3- at pH 5 were 1.5 mg/g for SCS, 1.8 mg/g for CB and 0.88 mg/g for NCS. The effect of temperature on sorption phenomenon was also investigated. The results indicated that adsorption is an endothermic process for phosphate ions removal. This study demonstrates that all the considered sorbents can be used as an alternative emerging technology for water treatment without any side effect or treatment process alteration.

Adsorption of nickel and copper onto natural iron oxide-coated sand from aqueous solutions: study in single and binary systems

Natural iron oxide-coated sand (NCS), extracted from the iron ore located in North-West of Tunisia, was employed to investigate its capacity to remove copper and nickel from aqueous solutions. The aim of this work was to characterize the considered sorbent (NCS) and to assess the possibility of removing nickel and copper from aqueous solutions by this sorbent. The effects of agitation time, pH, initial metal ion concentration and temperature on the removal of these metals were studied. In order to study the sorption isotherm, two equilibrium models, the Freundlich and Langmuir isotherms, were analyzed. The effect of solution pH on the adsorption onto NCS was studied in the pH range from 2 to 7 and 2 to 9 for copper and nickel respectively. The adsorption was endothermic and the computation of the parameters, DeltaH degrees, DeltaS degrees and DeltaG degrees, indicated that the interactions were thermodynamically favourable. Experiments with Cu and Ni adsorption measured together showed that Cu severely interfered with Ni adsorption to the NCS and vice versa under the conditions of the two coexisted ions adsorption.

Fate of selected estrogenic hormones in an urban sewage treatment plant in Tunisia (North Africa)

Estrogenic compounds have been monitored for one year at an urban sewage treatment plant (STP) located in Tunisia, to evaluate their fate and seasonal variations. The concentrations of these compounds were determined in both wastewater and sludge phases by gas chromatography coupled with mass spectrometry (GC-MS). Results showed that the highest removal of all estrogens (≥80%) was observed in summer. Mass balance analysis revealed that biodegradation was the predominant removal mechanism. Moreover, the results showed that the removal efficiency of the studied emerging micropollutants and their concentrations in the solid phase of return sludge were much higher in winter and spring than in summer and autumn. These findings were closely related to microbial activity and the concentration of mixed liquor suspended solids (MLSSs). Finally, the findings can be used to help with the modifications that could be implemented in that STP for the improved removal of estrogenic contaminants.

Multi-component adsorption of copper, nickel and zinc from aqueous solutions onto activated carbon prepared from date stones

The removal of Cu(2+), Ni(2+), and Zn(2+) ions from their multi-component aqueous mixture by sorption on activated carbon prepared from date stones was investigated. In the batch tests, experimental parameters were studied, including solution pH, contact time, initial metal ions concentration, and temperature. Adsorption efficiency of the heavy metals was pH-dependent and the maximum adsorption was found to occur at around 5.5 for Cu, Zn, and Ni. The maximum sorption capacities calculated by applying the Langmuir isotherm were 18.68 mg/g for Cu, 16.12 mg/g for Ni, and 12.19 mg/g for Zn. The competitive adsorption studies showed that the adsorption affinity order of the three heavy metals was Cu(2+) > Ni(2+) > Zn(2+). The test results using real wastewater indicated that the prepared activated carbon could be used as a cheap adsorbent for the removal of heavy metals in aqueous solutions.

Lead removal from aqueous solutions by a Tunisian smectitic clay

The adsorption of Pb(2+) ions onto Tunisian smectite-rich clay in aqueous solution was studied in a batch system. Four samples of clay (AYD, AYDh, AYDs, AYDc) were used. The raw AYD clay was sampled in the Coniacian-Early Campanian of Jebel Aïdoudi in El Hamma area (South of Tunisia). AYDh and AYDs corresponds to AYD activated by 2.5 mol/l hydrochloric acid and 2.5 mol/l sulphuric acid, respectively. AYDc corresponds to AYD calcined at different temperatures (100, 200, 300, 400, 500 and 600 degrees C). The raw AYD clay was characterized by X-ray diffraction, chemical analysis, infrared spectroscopy and coupled DTA-TGA. Specific surface area of all the clay samples was determined from nitrogen adsorption isotherms. Preliminary adsorption tests showed that sulphuric acid and hydrochloric acid activation of raw AYD clay enhanced its adsorption capacity for Pb(2+) ions. However, the uptake of Pb(2+) by AYDs was very high compared to that by AYDh. This fact was attributed to the greater solubility of clay minerals in sulphuric acid compared to hydrochloric acid. Thermic activation of AYD clay reduced the Pb(2+) uptake as soon as calcination temperature reaches 200 degrees C. All these preliminary results were well correlated to the variation of the specific surface area of the clay samples. The ability of AYDs sample to remove Pb(2+) from aqueous solutions has been studied at different operating conditions: contact time, adsorbent amount, metal ion concentration and pH. Kinetic experiments showed that the sorption of lead ions on AYDs was very fast and the equilibrium was practically reached after only 20 min. The results revealed also that the adsorption of lead increases with an increase in the solution pH from 1 to 4.5 and then decreases, slightly between pH 4.5 and 6, and rapidly at pH 6.5 due to the precipitation of some Pb(2+) ions. The equilibrium data were analysed using Langmuir isotherm model. The maximum adsorption capacity (Q(0)) increased from 25 to 25.44 mg/g with increasing temperature from 25 to 40 degrees C. Comparative study between sulphuric acid activated clay (AYDs) and powder activated carbon (PAC) for the adsorption of lead was also conducted. The results showed that sulphuric acid activated clay is more efficient than PAC.

A study on removal characteristics of copper from aqueous solution by sewage sludge and pomace ashes

In the present work, the abilities of sewage sludge and pomace ashes to remove copper (Cu(2+)) ions from aqueous solutions are compared. Batch adsorption experiments were performed in order to evaluate the removal efficiency of these materials. Effect of contact time, solution pH, ash concentration and temperature on the removal of Cu(2+) was investigated. The results of batch equilibrium studies showed that the solution pH was the key factor affecting the adsorption characteristics. In general, the amount of Cu removed increased as the solid concentration and pH increased, and then it remained constant over a wide pH region. The adsorption test of applying sewage sludge and pomace ashes into synthetic wastewater revealed that the adsorption data of these materials for copper ions were better fitted to the Langmuir isotherm since the correlation coefficients for the Langmuir isotherm were higher than that for the Freundlich isotherm. The estimated maximum capacities of copper adsorbed by sewage sludge and pomace ashes were 5.71 and 6.98 mg g(-1), respectively. Experimental results indicated that the adsorption was favorable at higher pH and higher temperature. Values of DeltaG degrees ranging from -4.64 to -5.13 kcal mol(-1) for sewage sludge ash and from -4.97 to -5.53 kcal mol(-1) for pomace ash suggest that the adsorption reaction is a physical process enhanced by the electrostatic effect. The values of DeltaH degrees and DeltaS degrees are, respectively, 4.27 kcal mol(-1) and 30.6 cal K(-1)mol(-1) for sewage sludge ash and 4.33 kcal mol(-1) and 31.3 cal K(-1)mol(-1) for pomace ash. The mechanisms of copper removal by these materials included adsorption and precipitation. The sewage sludge and pomace ashes are shown to be effective adsorbents for this metal.

Adsorption of a textile dye "Indanthrene Blue RS (C.I. Vat Blue 4)" from aqueous solutions onto smectite-rich clayey rock

The adsorption of a textile dye, namely, Indanthrene Blue RS (C.I. Vat Blue 4) onto smectite-rich clayey rock (AYD) and its sulphuric acid-activated products (AYDS) in aqueous solution was studied in a batch system with respect to contact time, pH, and temperature. The adsorbents employed were characterized by X-ray diffraction, infrared spectroscopy and specific surface area, cation exchange capacity and point of zero charge were also estimated. The effect of contact time on dye adsorption showed that the equilibrium was reached after a contact time of 40 min for the both adsorbents. The optimum pH for dye retention was found 6.0 for AYDS and 7.3 for AYD. The equilibrium adsorption data were analysed using the Langmuir and Freundlich isotherms. The adsorption capacities (Q(m)) for AYD and AYDS were found 13.92 mg/g and 17.85 mg/g, respectively. The effect of temperature on the adsorption was also investigated; adsorption of Indanthrene Blue RS is an endothermic process. This study demonstrates that all the considered adsorbents can be used as an alternative emerging technology for water treatment.

Impact of orthophosphate addition on biofilm development in drinking water distribution systems

The contamination of the water distribution network results from fixed bacteria multiplication (biofilm) on the water pipe walls, followed by their detachment and their transport in the circulating liquid. The presence of biofilms in distribution networks can result in numerous unwanted problems for the user such as microbial contamination of the distributed water and deterioration of the network (bio-corrosion). For old networks, lead-containing plumbings can be a serious cause of worry for the consumer owing to the release of lead ions in the circulating water. Among the solutions considered to reduce the presence of lead in drinking water, the addition of orthophosphates constitutes an interesting alternative. However, the added orthophosphate may cause--even at low doses--additional microbial growth. The main objective of this study was to evaluate the impact of the orthophosphate treatment on the biofilm development in the water supplied by the Joinville-le-Pont water treatment plant (Eau de Paris, France). For this purpose, a laboratory pilot plant was devised and connected to the considered water network. Two quantification methods for monitoring the biofilm formation were used: the enumeration on R2A agar and the determination of proteins. For the biofilm detachment operation, an optimization of the rinsing step was firstly conducted in order to distinguish between free and fixed biomass. The data obtained showed that there was a linear relation between both quantification methods. They also showed that, for the tested water, the bacterial densities were not affected by orthophosphate addition at a treatment rate of 1mg PO(4)(3-)/L.

Retention of nickel from aqueous solutions using iron oxide and manganese oxide coated sand: kinetic and thermodynamic studies

In this study, the removal of nickel ions from aqueous solutions using iron oxide and manganese oxide coated sand (ICS and MCS) under different experimental conditions was investigated. The effect of metal concentration, contact time, solution pH and temperature on the amount of Ni(II) sorbed was studied and discussed. Langmuir and Freundlich isotherm constants and correlation coefficients for the present systems at different temperatures were calculated and compared. The equilibrium process was well described by the Langmuir isotherm model: the maximum sorption capacities (at 29 K) were 2.73 mg Ni/g and 3.33 mg Ni/g of sorbent for ICS and MCS, respectively. Isotherms were also used to evaluate the thermodynamic parameters (deltaG degrees, deltaH degrees, deltaS degrees) of adsorption. The sorption kinetics were tested for the pseudo-first-order, pseudo-second-order and intra-particle diffusion models. Good correlation coefficients were obtained for the pseudo-second-order kinetic model, showing that the nickel uptake process followed the pseudo-second-order rate expression.

Biogeochemical assessment of the impact of Zn mining activity in the area of the Jebal Trozza mine, Central Tunisia

Soil pollution associated with potentially toxic elements (PTEs) from mining residues is a significant problem worldwide. The decommissioned Jebal Trozza mine, located in central Tunisia, may pose a serious problem because of the possible high concentrations of PTEs present in its wastes. This mine is a potential source of contamination for agriculture in this area due to both direct causes (pollution of agricultural soils) and indirect causes (pollution of sediments that accumulate in a dam used for irrigation). The aim of the study reported here was to assess the effects of local mining activity in two respects: (1) in terms of soil quality, as determined by soil edaphological parameters and PTEs contents in the mining wastes and local soils; and (2) in terms of biological quality, as evaluated by quantification of enzymatic activity as an indicator of bacterial activity in soils and wastes. The mine tailings contained high levels of Pb (1.83-5.95%), Zn (7.59-12.48%) and Cd (85.95-123.25 mg kg^-1). The adjacent soils were also highly contaminated with these elements, with average concentrations of Pb, Zn and Cd that exceeded the European standard values for agricultural soils (3, 300 and 300 mg kg^-1 for Cd, Pb and Zn, respectively). Enzymatic dehydrogenase showed zero activity in waste piles and very low activity in PTE-contaminated soils, but this activity returned to normal values as the pollution decreased, thus demonstrating the effect that the contamination load had on the health of the studied soils. A Statistical Factor Analysis clearly distinguished three groups of samples, and these are related to the influence that mining on the soils and sediments had on the PTE concentrations and their effects on the biological quality of the soil. An environmental assessment based on the enrichment factor criteria indicated risk levels that varied from strongly to severely polluted. The risk appears to be greater close to the mine, where the highest PTE levels were determined.

The impact of sewage sludge and compost on winter triticale

There is an increasing interest in the agricultural application of organic waste such as soil amendment, due to the possibility of recycling valuable components, organic matter, and nutrient elements necessary for plant growth. The present study was carried out to evaluate the effects of sewage sludge, and green waste compost application, on a forage crop, triticale "X Triticosecale Wittmack" compared to unfertilized control. The experimental design was installed in the glasshouse conditions at the Regional Field Crop Research Center in Beja, Tunisia. Sewage sludge and green waste compost were added by four rates (0, 5, 10, and 20 t/ha) in soil, 15 days before triticale sowing. The main results showed that plant response differs depending on the type of adding fertilizer. Indeed, compost inputs decreased shoot length and production of triticale, among all sewage sludge rates, by average values of 26 and 60% respectively at final harvest, as compared to unamended soil. However, amendment with different rates of sewage sludge significantly (p < 0.05) increased different plant growth and yield attributes.

Studies of lead retention from aqueous solutions using iron-oxide-coated sorbents

In this research, experiments were conducted to study Pb(2+) sorption onto engineered iron-oxide-coated sand (IOCS) and iron-oxide-coated crushed brick (IOCB), as well as onto naturally iron-oxide-coated sand (NIOCS). Optical and scanning electron microscopy (SEM) analyses were realised to investigate the surface properties and morphology of the coated sorbents. Infrared spectroscopy and X-ray diffraction techniques were also used to characterise the sorbent structures. Adsorption of lead from synthetic aqueous solutions was investigated by batch experiments. Results show that adsorption is slightly dependent on pH. The maximum adsorption capacity obtained at pH 6 was 5, 5.5 and 2.9 mg g(-1) for IOCS, IOCB and NIOCS, respectively. Both Freundlich and Langmuir isotherms can describe experimental data. The influence of temperature on the adsorption process was also evaluated. Results indicated that adsorption of Pb(2+) on the three sorbents is endothermic. The thermodynamic parameters (DeltaG(degrees), DeltaH(degrees) and DeltaS(degrees)) for Pb(2+) sorption on all considered sorbents were also determined from the temperature dependence. All considered sorbents could be an alternative emerging technology for water treatment without any side effects or treatment process alterations. However, IOCB has the best performances due to its greater capacity for the retention of lead.

Effects of deltamethrin, dimethoate, and chlorpyrifos on survival and reproduction of the collembolan Folsomia candida and the predatory mite Hypoaspis aculeifer in two African and two European soils

Indiscriminate use of pesticides is rampant in most parts of Africa, but only scanty ecotoxicological data exist for the protection of soil organisms-and these data were usually obtained under temperate conditions, including the use of Organisation for Economic Co-operation and Development (OECD) standard test protocols. In order to assess the effects of 3 commonly used pesticides (deltamethrin, dimethoate, chlorpyrifos) on soil fauna in Africa, noncontaminated natural soils were collected from Nigeria and Tunisia. In addition, 2 common test soils, OECD artificial soil and European (Landwirtschaftliche Untersichungs- und Forschungsanstalt [LUFA]) 2.3 soil, were used in OECD standard reproduction tests. Two microarthropod species, the springtail Folsomia candida and the predatory mite Hypoaspis aculeifer, were exposed in these 4 soils spiked individually with the 3 insecticides. Results show that the collembolan F. candida was more sensitive than the mite H. aculeifer for all 3 insecticides. The toxicity of each insecticide in the 4 soils differed, with few exceptions, by less than an order of magnitude. However, the pattern of toxicity was not consistent, that is, the lowest toxicity was often but not always found in OECD artificial soil. Soil- and pesticide-specific patterns of toxicity to F. candida and H. aculeifer might be related to the physicochemical properties of the soils and thus the availability of the 3 pesticides. Following the rules laid down in the European Union for the registration of pesticides and using standard European exposure scenarios, neither an acute nor a chronic risk of dimethoate and chlorpyrifos can be excluded (with few exceptions) in all 4 soils. Lower risks were identified for deltamethrin. For pesticide used in Africa, an environmental risk assessment based on data gained in tests with at least 1 additional natural field soil, preferably of African origin, should be performed using the same risk assessment principles as in the European Union. Integr Environ Assess Manag 2018;14:92-104. © 2017 SETAC.

Removal of nickel and cadmium from aqueous solutions by sewage sludge ash: study in single and binary systems

Sewage sludge ash can potentially be used for the removal of metal ions from wastewater because its chemical composition is similar to that of fly ash. The aim of this work was to investigate the adsorptive characteristics of this material, including specific surface area and pH of zero point of charge (pH zpc), and to assess the possibility of removing nickel and cadmium from aqueous solutions by this sorbent. The effects of agitation time, pH, initial metal ion concentration and temperature on the removal of these metals were studied. In order to study the sorption isotherm, two equilibrium models, the Langmuir and Freundlich isotherms, were analysed. The effect of solution pH on the adsorption on to sewage sludge ash was studied in the pH range from 2 to 8. The adsorption was endothermic and the computation of the parameters, delta H0, delta S0 and delta G0, indicated that the interactions were thermodynamically favourable. Experiments with Ni and Cd adsorption measured together showed that Cd severely interfered with Ni adsorption to sewage sludge ash and vice versa.

Impacts of several pollutants on the distribution of recent benthic foraminifera: the southern coast of Gulf of Gabes, Tunisia

In addition to physicochemical methods, benthic foraminifera have become an essential tool for the assessment of polluted environments. The main objectives of the present work were to study the distribution of benthic foraminifera along the coastline of Skhira and Gabes (southern coast of Gulf of Gabes) and to predict the impact of pollution on these organisms. Thirty-one samples were studied and a polluted area was delimited by chemical analysis, where heavy metal, fluoride, phosphorus, nitrogen, and COT contents are very high. Thirty-four species of benthic foraminifera were identified and their response to pollution is very remarkable, in which their distribution shows barren area, corresponding to the highly polluted area. Away from the contaminated area, the density and the diversity of these organisms increase. Statistical analyses (principal component analysis (PCA)/FA and matrix correlation) show a possible control of these pollutants on biotic indices (with negative correlation), in addition to the presence of tolerant and sensitive species to pollution. A variety of test malformations were noticed especially in Ammonia beccarii, Peneroplis planatus, Sorites variabilis, and Adelosina pulchella. Unpolluted stations were dominated by species characteristic of shallow water environments with sandy sediment such Ammonia parkinsoniana, Triloculina trigonula, Quinqueloculina agglutinans, and P. planatus.

Combined biological processing and microfiltration in the treatment of unhairing wastewater

INTRODUCTION

The unhairing step, a part of the beamhouse process, is particularly polluting, generating an alkaline wastewater with high concentrations of organic and inorganic matter. The aim of this study was to evaluate the treatment of this industrial wastewater using a combination of biological and microfiltration processes.

MATERIALS AND METHODS

The performance of the activated sludge system (AS) was evaluated under varying organic loading rate (OLR) from 0.9 to 3.4 kg chemical oxygen demand (COD) m(-3) day(-1) and decreasing hydraulic retention time (HRT) from 3 to 1.6 days.

RESULTS

For an HRT of 3 days, the increase of OLR significantly affected the removal of organic matter. Therefore, the biological organic matter removal of unhairing wastewater decreased from 92% to 66% for COD and from 87 to 53% for biological oxygen demand (BOD(5)). GC-MS analyses showed that biological treatment of unhairing wastewater contributed to the removal of long chain fatty acids and their degradation products. Microfiltration of unhairing wastewater was performed using 0.2 μm pore-size membranes in tangential filtration. The highest removal efficiencies were obtained for bacteria (100%) and turbidity (98.4%) which confirmed the importance of the microfiltration step in treatment of unhairing wastewater. The result showed that the flux decay rate was greatest at the start of the microfiltration assay (90 L h(-1) m(2)), becoming 60.7 L h(-1) m(2) after 32 min.

CONCLUSION

This change indicated that fouling occurred rapidly once the membrane module was put into operation.

Investigation of endogenous biomass efficiency in the treatment of unhairing effluents from the tanning industry

The tanning industry is of great economic importance worldwide; however, the potential environmental impact of tanning is significant. An important component in tanning is the removal of hair from the hide (unhairing), a process which generates considerable amounts of toxic effluent characterized by a high concentration of sulphur, rich mineral compounds, a high alkalinity and a high organic load. The purpose of the work described here was to evaluate the biodegradability of the unhairing wastewater by endogenous biomass in batch culture and continuous systems. The detoxification of the effluent was assessed by seed germination tests. The batch culture experiments showed that variations in COD, temperature and pH significantly affected the endogenous biomass growth and activity. The optimal treatment condition corresponded to an initial COD of 6 g/L, pH of 7 and 30 degrees C. Under continuous culture conditions, the reactor was fed for 48 days with the unhairing effluent. The optimal COD removal efficiency was 85.5%. During treatment, a transformation of sulphides into thiosulphates and then sulphates was also observed. The effect of untreated and treated unhairing wastewater on seed germination of different plant species was studied. The data suggested that treatment decreased the wastewater toxicity. Indeed, germination was inhibited when the effluent dilution was lower than 20% and 10% for treated and untreated wastewater, respectively.