Evaluation of different operating modes of an autosampler for portable capillary electrophoresis

A compact, inexpensive sampler instrument for portable capillary electrophoresis (CE) was developed and tested to monitor common inorganic ions in drinking water samples. The sampler uses peristaltic and vacuum pumps and pinch and check valves to control liquid flows. The paper also addresses various aspects of CE associated with portability, open access instrumentation and prospects of CE for citizen science. The extensive use of items provided by the electronic and computer industry contributes to this trend.

Complete capillary electrophoresis process on a drone: towards a flying micro-lab

Hazardous remote places exist in the world. Why should health or life be risked sending a scientist to the investigation site, as the remote analytical instrumentation exists? Different scientific fields require instruments that could be used on-site (in situ), therefore the purpose of this work was to design a fully automated chemical analysis system small enough to be mountable on a drone. Here we show an autonomous analytical system with sampling capability on a drone. The system is suited for the remote and autonomous analysis of volatile and non-volatile chemicals in the air. The designed system weighs less than 800 g. Data are transmitted wirelessly. Collected substances are separated automatically without the intervention of the operator using the method of capillary zone electrophoresis. The analytes are detected using a miniaturized contactless conductivity detector quantifying them down to less than 1 μM. In this work, we demonstrated sampling and separation of volatile amines (triethylamine and diethylamine) and organic acids (acetic and formic acids), non-volatile inorganic cations (K⁺, Ca²⁺, Na⁺), and protein (bovine serum albumin) in the aerosol state. It was shown that the capillary electrophoretic analysis can be performed on a hovering drone. We anticipate our work to be a starting point for more sophisticated, autonomous complex sample analysis. We believe that our designed instrument will enable the investigation of hazardous places in different research fields.

Towards adaptive method for peak migration time correction: discretization period in electropherograms

Capillary electrophoresis often causes unrepeatable peak migration times in the electropherogram due to changes of electroosmosis, yet in some cases this separation technique does not have a replacement alternative. Some attempts to overcome this issue have been performed introducing internal standards into the sample and compensating peak shifting in time. However, existing vector calculation-based methods are computationally intensive for portable instrumentation and usually limited to post-processing applications with 1 or 2 markers. In this work, an original approach of compensating peak migration time shift via signal discretization period correction is proposed. Using the proposed method, the number of reference points or markers that are used for compensation is extended. This method is effective in compensating migration time of peaks in real samples, where high sample injection volumes are used. Using 4 reference peaks in compensation, the method was capable of reducing the relative standard deviation of migration time of the peaks in the electropherograms more than 15 times. Corrected signal discretization periods indicated very high correlations with recorded separation currents, what can be perspective developing an adaptive peak migration time compensation method in capillary electrophoresis.

Design and applications of miniaturized, portable LED based colorimeter

Portable and autonomous analytical instrumentation is becoming more important. Portable instrumentation can be designed via the miniaturization approach and this is a challenging task due to: (i) the limited battery power supply, (ii) a low number of mechanical and moving parts allowed in the design and (iii) susceptibility to changing environment and temperature fluctuations. In this work we describe the design of a light emitting diode (LED) based 3D printed miniaturized colorimeter (dimensions: 5 cm × 4 cm × 4.5 cm (length, width, height), weight less than 56 g). The colorimeter was optimized for determination of the total phenolic compound content, the total flavonoid content and radical scavenging activity. The designed instrument provides comparable results to those of a conventional desktop spectrophotometer existing on the market. The designed LED based miniaturized colorimeter has wireless communication capability. This work demonstrates that this instrument can be applied investigating real samples.

Comparison of the contents of various antioxidants of sea buckthorn berries using CE

The increased interest in sea buckthorn (Hippophae rhamnoides L.) made it possible to investigate the antioxidant content in it. To address this issue, the presence of following antioxidant compounds were analyzed: trans-resveratrol, catechin, myricetin, quercetin, p-coumaric acid, caffeic acid, L-ascorbic acid (AA), and gallic acid (linear range of 50-150 micromol/L) in six different varieties of sea buckthorn berries extracts (sea buckthorn varieties: "Trofimovskaja (TR)," "Podarok Sadu (PS)," and "Avgustinka (AV),") received from two local Estonian companies. Trans-Resveratrol, catechin, AA, myricetin, and quercetin were found in extracts of sea buckthorn. Moreover, AA, myricetin, and quercetin contents were quantified. The biggest average AA content was found in TR (740 mg/100 g of dried berries, respectively). Furthermore, the same varieties gave the biggest quercetin content 116 mg/100 g of dried berries, respectively. For analysis, CZE was used and the results were partly validated by HPLC. Statistically no big differences in levels of antioxidants were consistently found in different varieties of sea buckthorn extracts investigated in this work.

Nonaqueous CE using contactless conductivity detection and ionic liquids as BGEs in ACN

N,N'-Alkylmethylimidazolium cations have been separated in NACE when one of the N,N'-dialkylimidazolium salts (ionic liquids (ILs)) was used as an electrolyte additive to the organic solvent separation medium. The separated species were 1-methyl-, 1-ethyl-, 1-butyl-, 1-octyl-, 1-decyl-3-methylimidazolium and N-butyl-3-methylpyridinium cations and BGE composed of 1-ethyl-3-methylimidazolium ethylsulfate or 1-butyl-3-methylimidazolium trifluoroacetate [BMIm][FAcO] (A6; B2) diluted in ACN. It was demonstrated that contactless conductivity detection (CCD) may be applied to monitoring the separation process in nonaqueous separation media, allowing to use the UV light-absorbing imidazolium-based electrolyte additives. There could be marked three concentration regions of added ILs; at first ionic strength of BGE below 1-2 mM, and then the actual electrophoretic mobility of analytes rises from 0. At concentrations above 1-2 mM, the added IL facilitated separation. In concentration region of 1-20 mM, the actual electrophoretic mobility of analyzed imidazolium cations was increasing with decrease in separation medium ionic strength. At higher concentrations of BGE (above 30 mM), the conductivity of the separation media became too high for this detector. Some organic dyes were also successfully separated and detected by contactless conductivity detector in a 20 mM A6 separation electrolyte in ACN.