Utility of a xanthene-based dye for determination of nilotinib using two spectroscopic approaches. Applications to bulk powder, capsules, and spiked human plasma

Novel, selective, facile, and precise spectroscopic approaches were validated to determine nilotinib hydrochloride, a tyrosine kinase inhibitor used to treat patients with chronic myeloid leukemia. These approaches depend on the reaction of the tertiary amine group of nilotinib with erythrosine B in the Britton-Robinson buffer at pH 4. Method I, depends on measuring the absorbance of the formed complex at 551 nm. The absorbance concentration plot showed linearity over the concentration range of 1.0 to 9.0 μg/ml. Method II, involved the measurement of the quenching of the native fluorescence of erythrosine B by adding nilotinib in an acidic medium. The fluorescence quenching of erythrosine B was measured at 549 nm after excitation at 528 nm. This approach showed excellent linearity in the concentration range of 0.04 to 0.7 μg/ml. The limit of detection values for Method I and Method II were 0.225 and 0.008 μg/ml, respectively, while the limit of quantitation values for Method I and Method II were 0.68 and 0.026 μg/ml, respectively. To get the optimal conditions, factors that may affect the formation of the ion-pairing complex were thoroughly examined. The two approaches were carefully validated following the International Conference of Harmonization (ICH Q2R1) guidelines. Statistical assessment of the results achieved using the suggested and previously published comparison approaches showed no significant difference. The approaches were successful in determining nilotinib in a pharmaceutical dosage form as well as spiked human plasma samples. The eco-friendly properties of the methods were evaluated by three different tools.

Utility of a novel turn-off fluorescence probe for the determination of tranilast, an adjunctive drug for patients with severe COVID-19

Tranilast (TR) could be investigated as a suitable anti-inflammatory and NLRP3 inflammasome inhibitor medication for the treatment of COVID-19 acute patients. Owing to its importance, our study was constructed for the determination of TR using a new, fast, sensitive, and reliable green spectrofluorimetric method. TR was quantified in this study by forming a complex with the acriflavine (AC) reagent. The reaction between TR and AC quenched the fluorescence of AC through the formation of an ion-association complex and the response was measured at 493 nm after excitation at 263 nm. It was observed that the quenching of the fluorescence of AC was linear (r = 0.9998) with the concentration of TR in the range of 1.0–15.0 μg mL⁻¹. The limit of detection was 0.224 μg mL⁻¹, and the limit of quantification was 0.679 μg mL⁻¹. The fluorescence quenching mechanism was carefully studied and was confirmed to be able to analyze TR in its pure form and its prepared pharmaceutical dosage form. To validate the method, the international conference of harmonization (ICH) Q₂R₁ guidelines were followed. The statistical assessment of the proposed and comparison methods revealed no significant differences between them. Moreover, the green criteria of the method were evaluated and confirmed.

Tranilast (TR) could be investigated as an anti-inflammatory and NLRP3 inflammasome inhibitor medication using acriflavine.

Synthesis of New Cyanopyridine Scaffolds and their Biological Activities

BACKGROUND

3-Cyanopyridine analogues are significant moieties with a variety of biological effects such as antioxidant, antimicrobial, anti-inflammatory and cytotoxic agents. In addition, they could be applied in the treatment of several diseases.

OBJECTIVE

The study conducted cyclo-addition of 3a-e derivatives with malononitrile to yield the corresponding 6-(4-((3-cyano-pyridinyl) amino) phenyl)-4-phenylnicotinonitriles 4a-e.

MATERIALS AND METHODS

Physical and spectral analyses were performed to demonstrate the proper structures of all incorporated analogues. The in vitro antimicrobial activity of the preps derivatives was investigated by testing them with a panel of pathogenic strains of bacteria and fungi. The anti-tuberculosis activity was observed against the Mycobacterium tuberculosis H37Rv strain. When examining cytotoxic agents for four different cell lines, researchers found that their activity was persuasive compared with that of standard antibiotics. In addition, the antioxidant activity of the synthesized analogues was evaluated using the DPPH method.

RESULTS AND DISCUSSIONS

The synthesized analogues were examined to determine their activity against the M. tuberculosis H37Rv strain. Derivatives 2c, 2e, 3d and 3e had good inhibition. Further screening was done for the highest potency against M. tuberculosis to determine the MICs. The antioxidant efficacy was evaluated via the DPPH technique matched with vitamin C as a positive control. The prospective results showed that the derivatives did not display scavenging efficacies in comparison with the standard.

CONCLUSION

Some synthesized derivatives displayed good potency against bacterial activity and M. Tuberculosis. However, the antioxidant performance of these derivatives did not display scavenging efficacies compared to vitamin C. The cytotoxic activity of the synthesized derivatives was examined against various cell lines to display good cytotoxic activity in the order 4a-e > 2a-e > 3a-b.

Simultaneous estimation of amlodipine and atorvastatin by micelle-augmented first derivative synchronous spectrofluorimetry and multivariate analysis

Five Selective, rapid and sensitive spectrofluorimetric methods were performed in this study for the simultaneous estimation of amlodipine besylate (AML) and atorvastatin (ATR) in their binary mixtures and combination polypills that are used for management of cardiovascular conditions. The first method depends on micelle-enhanced first derivative synchronous fluorimetric analysis (method I) and the other four methods are multivariate analysis techniques based on the use of factor-based calibration prediction methods comprising partial least squares (PLS), Principal Component Regression (PCR), genetic algorithm PLS (GA-PLS) and genetic algorithm PCR (GA-PCR). The synchronous fluorescence spectra of the solutions were measured at a constant wavelength difference; Δλ = 100 nm. The magnitudes of the peaks of the first derivative spectra (1D) were measured at 292 nm and 387 nm for ATR, and AML correspondingly. The multivariate models were constructed utilizing fifteen mixtures as a calibration set and ten mixtures as a validation set. The linearity of all the methods was in the concentration ranges of (0.1-4.0 μg mL^-1, 0.4-10.0 μg mL^-1) for AML and ATR, correspondingly. Statistical analysis revealed no significant difference between the proposed methods and the reference method. The validity of the proposed methods allows their suitability for quality control work. All the analysis settings were optimized and all the suggested procedures were applied productively for the determination of both drugs in synthetic mixtures, validation set, and combination polypills.

Assessment of lipophilicity of newly synthesized celecoxib analogues using reversed-phase HPLC

BACKGROUND

Lipophilicity is a physicochemical property of an essential importance in medicinal chemistry; therefore, fast and reliable measurement of lipophilicity will affect greatly the drug discovery process.

RESULTS

A series of N-benzenesulfonamide-1H-pyrazoles, oximes and hydrazones as celecoxib analogues was investigated with regard to their retention behavior using reversed-phase high performance liquid chromatography (RP-HPLC). The mobile phases employed for this study consist of a mixture of water and methanol in different proportions. In addition, the stationary phase utilized for this separation was C18 silanized silica gel and using 200 nm as a detection wavelength. The retention behavior of the investigated compounds was determined based on practical determination of log k at different concentrations of methanol (as an organic modifier) in the mobile phase ranging from 60 to 80%. It was observed that the retention of these compounds (expressed as log k) decreased in a linear manner with increasing the concentration of methanol. High correlation coefficients (more than 0.90 in most cases) were obtained for the relationship between the volume fraction of the organic solvent and the retention values represented as log k w. A comparative evaluation was carried out between chromatographically-obtained lipophilicity parameters (represented as lipophilicity chromatographic index log k w or isocratic chromatographic hydrophobicity index, φ 0) and the computationally calculated log P values (miLogP, ALOGP, ACD/Labs and ALOGPs).

CONCLUSION

It was found that a good correlation exists between the experimental and computed log P values. In the future, these results can give a deep insight about the anti-inflammatory and analgesic activity of the newly synthesized compounds.

Simultaneous evaluation of losartan and amlodipine besylate using second-derivative synchronous spectrofluorimetric technique and liquid chromatography with time-programmed fluorimetric detection

This study is concerned with two sensitive, fast and reproducible approaches; namely, second-derivative synchronous fluorimetry (method I) and reversed phase high-performance liquid chromatography with fluorimetric detection (method II) for synchronized evaluation of losartan (LOS) and amlodipine besylate (AML). Method I is based on measuring second-derivative synchronous fluorescence spectra of LOS and AML at Δλ = 80 nm in water. The experimental factors influencing the synchronous fluorescence of the considered compounds were sensibly adjusted. The chromatographic analysis was executed on a Nucleodur MN-C18 column of dimensions; 250 × 4.6 mm i.d. and 5 µm particle size). The fluorimetric detection was time-programmed at λem = 440 nm for AML (0.0-7.5 min) and at λem = 400 nm for LOS (7.5-10 min) after excitation at λex = 245 nm. The mobile phase is a blend of acetonitrile with 0.02 M phosphate buffer in a proportion of 45 : 55, pH 4.0, pumped using a flow rate of 1 ml min^-1. The calibration plots were established to be 0.1-4.0 µg ml^-1 for both drugs in method I and 0.05-4.0 µg ml^-1 for both drugs in method II. The study was extended to the evaluation of the two drugs in their co-formulated tablets.

First derivative spectrofluorimetric determination of zopiclone and its degradation product, 2-amino-5-chloropyridine, in pharmaceutical formulations with preliminary tool in biological fluids for clinical evidence of zopiclone intake

A simple, fast, sensitive and stability-indicating derivative spectrofluorimetric method is presented for the assay of zopiclone (ZOP), a drug with hypnotic effect, and its main degradation product and major contaminant, 2-amino-5-chloropyridine (ACP). The method is based on measuring the inherent fluorescence intensity of both drugs at λex=300nm in methanol, then differentiation using D1 (first derivative technique). The developed method was found to be rectilinear over a range of 0.2-4μg/mL of ZOP and 4-100ng/mL of ACP. The limits of detection were 0.05μg/mL of ZOP and 0.2ng/mL of ACP with the limit of quantitation of 0.17μg/mL of ZOP and 0.7ng/mL of ACP. The outcoming results of the proposed method were compared to those obtained by a reference method showing no significant statistical difference between them concerning precision and accuracy. Additionally, the developed method was applied for detecting ACP in spiked human urine and plasma specimens as a tool of clinical evidence of zopiclone intake that can be easily implemented in forensic laboratories. The proposed method was validated as per ICH guidelines.

Simultaneous determination of tylosin and josamycin residues in muscles, liver, eggs and milk by MLC with a monolithic column and time-programmed UV detection: application to baby food and formulae

Background

Tylosin and Josamycin are macrolide antibiotics. They are used in the treatment of pneumonia, arthritis and mastitis in cattle, and mycoplasma infections in poultry. The incorrect use of antibiotics has lead to the presence of antibiotic residues in foods. The residues cause toxic effects on consumers.

Results

A simple and sensitive method was optimized and validated for the analysis of tylosin and josamycin residues in food samples. Analytical separation was performed in less than 10 min using a RP C₁₈ monolithic column with time-programmed UV detection at 287 nm and 232 nm and a micellar solution of 0.17 M sodium dodecyl sulphate, 14% methanol and 0.3% triethylamine in 0.02 M phosphoric acid buffered at pH 4 as the mobile phase. The method was fully validated in accordance with ICH guidelines. The micellar method was successfully applied to quantitatively determine tylosin and josamycin residues in spiked chicken muscles, chicken liver, bovine muscles, liver, milk and eggs. It was also extended to the determination of tylosin and josamycin residues in chicken-based baby food and baby formulae. The compounds were separated by a monolithic column which, on account of its particular structure, could bear higher flow rates than usually found for this kind of analysis. High extraction efficiency for tylosin and josamycin was obtained without matrix interference in the extraction process and in the subsequent chromatographic determination. No organic solvent was used during the pretreatment step. Hence, it is considered an interesting technique for “green” chemistry.

Conclusion

The proposed method was validated and successfully applied for the determination of tylosin and josamycin residues in spiked chicken muscles, chicken liver, bovine muscles, liver, milk and eggs. It was also extended to the determination of tylosin and josamycin residues in chicken-based baby food and baby formulae.

Micellar liquid chromatographic analysis of benzyl alcohol and benzaldehyde in injectable formulations

An accurate, sensitive and selective reversed-phase micellar liquid chromatographic method was developed for simultaneous determination of benzyl alcohol and benzaldehyde. This method was applied in different injectable formulations containing diclofenac, piroxicam, lincomycin and clindamycin. The method showed excellent linearity in the range of 10-100 microg mL(-1) and 1-20 microg mL(-1) with the limit of detection (S/N = 3) 0.25 microg mL(-1) (2.3 x 10(-6) mol L(-1)) and 0.12 microg mL(-1) (1.13 x 10(-6) mol L(-1)) for benzyl alcohol and benzaldehyde, respectively. The suggested method was successfully applied to the analysis of the studied drugs in bulk with average recoveries of 100.1 +/- 1.0% for benzyl alcohol and 100.4 +/- 1.6% for benzaldehyde, and to the determination of benzyl alcohol and benzaldehyde in injectable formulations with the respective average recoveries of 99.8 +/- 0.3 and 100.0 +/- 0.4%.