Effect of posterior cut angle on tibial component loading

Although clinical studies have shown that posterior cut angle affects tibial component stability, biomechanical studies are lacking. Fifteen Sawbones tibiae were divided into 5 groups and prepared with 0 degrees , 3 degrees, 6 degrees, 9 degrees, and -5 degrees tibial surface cuts, and a tibial component was implanted with cement. Using a standard and then a highly congruent polyethylene insert, the knee was loaded at 0 degrees and 30 degrees of flexion. There were statistically significant increases in anterior micromotion of the standard polyethylene component for each increase in posterior slope cut angle, which increased for the highly congruent polyethylene component. The anterior slope cut (-5 degrees) led to significant posterior micromotion of the tibial polyethylene component. Increased posterior slope cut angle significantly decreased tibial anterior compressive strains and significantly increased tibial posterior compressive strains. The highly congruent insert significantly increased this posterior strain. The results indicate that cutting the articular surface of the tibia at a 0 degrees or 3 degrees posterior slope provides the greatest tibial component stability.

Studies of the cyclic adenosine monophosphate chemoreceptor of Paramecium

A doublet of proteins (approximately 48,000 Mr) from the Paramecium cell body membrane fits several criteria for the external cAMP chemoreceptor. These criteria include: (i) selective elution from a cAMP affinity column, matching a specificity that could be predicted from the behavioral response and whole-cell binding; (ii) binding to wheat germ agglutinin indicating the presence of carbohydrate moieties indicating surface exposure; and (iii) selective inhibition of the intact cells' chemoresponse to cAMP by antibodies against the doublet. Additional evidence for the existence of a receptor, in general, comes from selective elimination of the cAMP chemoresponse by photoaffinity labeling of while cells with 8-N3-cAMP. The doublet proteins are not identical to the regulatory subunit of a cAMP-dependent protein kinase from Paramecium, the Dictyostelium cAMP chemoreceptor, or the 42-45 kDa range proteins related to the large surface glycoprotein in Paramecium. The doublet proteins are not readily separable and, as in Dictyostelium, may represent two different covalent modification states of the same protein. Amino acid analysis indicates that the proteins are similar, but does not distinguish between the possibilities of proteolysis and covalent modification. Once cloned, this doublet may prove to be only the fifth external, eukaryotic chemoreceptor to be identified.

Esophageal fibrovascular polyp protruding from the mouth

A case of a 66-year-old woman with a giant fibrovascular polyp protruding from the mouth is presented. The polyp was successfully removed by a cervical esophagotomy.

[Laparoscopic approach for treatement of gastroesophageal reflux in newborns and infants with severe respiratory disorders. When to indicate it?]

Gastroesophageal reflux (GER) is a common finding in the newborn period, which is in general well tolerated, and tends to resolve spontaneously at about 18 months of age. However, a small number of children will present important respiratory manifestations (aspiration and apneic episodes), or increase in the manifestations of pre existing conditions (tracheomalacia, laryngomalacia), which can produce life threatning events. Ph monitoring does not completely discard the possibility of GER and the use of prokinetic drugs, in association with other drugs to protect the esophagus do not prevent serious consecuences produced by reflux to the airway. In this report six children with severe airway disease and marked GER, with no response to initial medical treatment required laparoscopic fundoplication. They have all resolved their airway disease, and are currently well. The laparocopic technique for fundoplication of small children seems to be a secure, well tolerated and definitive treatment in the hands of trained surgeons.

Characterising Hydroxyapatite Deposited from Solution onto Novel Substrates: Growth Mechanism and Physical Properties

Whilst titanium, stainless steel, and cobalt-chrome alloys are the most common materials for use in orthopaedic implant devices, there are significant advantages in moving to alternative non-metallic substrates. Substrates such as polymers may have advantageous mechanical biological properties whilst other substrates may bring unique capability. A key challenge in the use of non-metal products is producing substrates which can be modified to allow the formation of well-adhered hydroxyapatite films which promote osteointegration and have other beneficial properties. In this work, we aim to develop methodology for the growth of hydroxyapatite films on surfaces other than bulk metallic parts using a wet chemical coating process, and we provide a detailed characterisation of the coatings. In this study, hydroxyapatite is grown from saturated solutions onto thin titanium films and silicon substrates and compared to results from titanium alloy substrates. The coating process efficacy is shown to be dependent on substrate roughness, hydrophilicity, and activation. The mechanism of the hydroxyapatite growth is investigated in terms of initial attachment and morphological development using SEM and XPS analysis. XPS analysis reveals the exact chemical state of the hydroxyapatite compositional elements of Ca, P, and O. The characterisation of grown hydroxyapatite layers by XRD reveals that the hydroxyapatite forms from amorphous phases, displaying preferential crystal growth along the [002] direction, with TEM imagery confirming polycrystalline pockets amid an amorphous matrix. SEM-EDX and FTIR confirmed the presence of hydroxyapatite phases through elemental atomic weight percentages and bond assignment. All data are collated and reviewed for the different substrates. The results demonstrate that once hydroxyapatite seeds, it crystallises in the same manner as bulk titanium whether that be on a titanium or silicon substrate. These data suggest that a range of substrates may be coated using this facile hydroxyapatite deposition technique, just broadening the choice of substrate for a particular function.

Development of Hydroxyapatite Coatings for Orthopaedic Implants from Colloidal Solutions: Part 1-Effect of Solution Concentration and Deposition Kinetics

This study introduces and explores the use of supersaturated solutions of calcium and phosphate ions to generate well-defined hydroxyapatite coatings for orthopaedic implants. The deposition of hydroxyapatite is conducted via several solutions of metastable precursors that precipitate insoluble hydroxyapatite minerals at a substrate-solution interface. Solutions of this nature are intrinsically unstable, but this paper outlines process windows in terms of time, temperature, concentration and pH in which coating deposition is controlled via the stop/go reaction. To understand the kinetics of the deposition process, comparisons based on ionic strength, particle size, electron imaging, elemental analyses and mass of the formed coating for various deposition solutions are carried out. This comprehensive dataset enables the measurement of deposition kinetics and identification of an optimum solution and its reaction mechanism. This study has established stable and reproducible process windows, which are precisely controlled, leading to the successful formation of desired hydroxyapatite films. The data demonstrate that this process is a promising and highly repeatable method for forming hydroxyapatites with desirable thickness, morphology and chemical composition at low temperatures and low capital cost compared to the existing techniques.

Development of Hydroxyapatite Coatings for Orthopaedic Implants from Colloidal Solutions: Part 2-Detailed Characterisation of the Coatings and Their Growth Mechanism

This study is the second part of a two-part study whereby supersaturated solutions of calcium and phosphate ions generate well-defined hydroxyapatite coatings for orthopaedic implants. An 'ideal' process solution is selected from Part 1, and the detailed characterisation of films produced from this solution is undertaken here in Part 2. Analysis is presented on the hydroxyapatite produced, in both powder form and as a film upon titanium substrates representative of orthopaedic implants. From thermal analysis data, it is shown that there is bound and interstitial water present in the hydroxyapatite. Nuclear magnetic resonance data allow for the distinction between an amorphous and a crystalline component of the material. As hydroxyapatite coatings are generated, their growth mechanism is tracked across repeated process runs. A clear understanding of the growth mechanism is achieved though crystallinity and electron imaging data. Transmission electron imaging data support the proposed crystal growth and deposition mechanism. All of the data conclude that this process has a clear propensity to grow the hydroxyapatite phase of octacalcium phosphate. The investigation of the hydroxyapatite coating and its growth mechanism establish that a stable and reproducible process window has been identified. Precise control is achieved, leading to the successful formation of the desired hydroxyapatite films.