1
|
Stabilization of an Infectious Enveloped Virus by Spray-Drying and Lyophilization. J Pharm Sci 2024:S0022-3549(24)00141-2. [PMID: 38643898 DOI: 10.1016/j.xphs.2024.04.012] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/27/2024] [Revised: 04/11/2024] [Accepted: 04/11/2024] [Indexed: 04/23/2024]
Abstract
Enveloped viruses are attractive candidates for use as gene- and immunotherapeutic agents due to their efficacy at infecting host cells and delivering genetic information. They have also been used in vaccines as potent antigens to generate strong immune responses, often requiring fewer doses than other vaccine platforms as well as eliminating the need for adjuvants. However, virus instability in liquid formulations may limit their shelf life and require that these products be transported and stored under stringently controlled temperature conditions, contributing to high cost and limiting patient access. In this work, spray-drying and lyophilization were used to embed an infectious enveloped virus within dry, glassy polysaccharide matrices. No loss of viral titer was observed following either spray-drying (at multiple drying gas temperatures) or lyophilization. Furthermore, viruses embedded in the glassy formulations showed enhanced thermal stability, retaining infectivity after exposure to elevated temperatures as high as 85 °C for up to one hour, and for up to 10 weeks at temperatures as high as 30 °C. In comparison, viruses in liquid formulations lost infectivity within an hour at temperatures above 40 °C, or after incubation at 25 °C for longer periods of time.
Collapse
|
2
|
Combinatorial High-Throughput Screening of Complex Polymeric Enzyme Immobilization Supports. J Am Chem Soc 2024; 146:9112-9123. [PMID: 38500441 DOI: 10.1021/jacs.3c14273] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/20/2024]
Abstract
Recent advances have demonstrated the promise of complex multicomponent polymeric supports to enable supra-biological enzyme performance. However, the discovery of such supports has been limited by time-consuming, low-throughput synthesis and screening. Here, we describe a novel combinatorial and high-throughput platform that enables rapid screening of complex and heterogeneous copolymer brushes as enzyme immobilization supports, named combinatorial high-throughput enzyme support screening (CHESS). Using a 384-well plate format, we synthesized arrays of three-component polymer brushes in the microwells using photoactivated surface-initiated polymerization and immobilized enzymes in situ. The utility of CHESS to identify optimal immobilization supports under thermally and chemically denaturing conditions was demonstrated usingBacillus subtilisLipase A (LipA). The identification of supports with optimal compositions was validated by immobilizing LipA on polymer-brush-modified biocatalyst particles. We further demonstrated that CHESS could be used to predict the optimal composition of polymer brushes a priori for the previously unexplored enzyme, alkaline phosphatase (AlkP). Our findings demonstrate that CHESS represents a predictable and reliable platform for dramatically accelerating the search of chemical compositions for immobilization supports and further facilitates the discovery of biocompatible and stabilizing materials.
Collapse
|
3
|
Supra-biological performance of immobilized enzymes enabled by chaperone-like specific non-covalent interactions. Nat Commun 2024; 15:2299. [PMID: 38485940 PMCID: PMC10940687 DOI: 10.1038/s41467-024-46719-5] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/07/2023] [Accepted: 03/01/2024] [Indexed: 03/18/2024] Open
Abstract
Designing complex synthetic materials for enzyme immobilization could unlock the utility of biocatalysis in extreme environments. Inspired by biology, we investigate the use of random copolymer brushes as dynamic immobilization supports that enable supra-biological catalytic performance of immobilized enzymes. This is demonstrated by immobilizing Bacillus subtilis Lipase A on brushes doped with aromatic moieties, which can interact with the lipase through multiple non-covalent interactions. Incorporation of aromatic groups leads to a 50 °C increase in the optimal temperature of lipase, as well as a 50-fold enhancement in enzyme activity. Single-molecule FRET studies reveal that these supports act as biomimetic chaperones by promoting enzyme refolding and stabilizing the enzyme's folded and catalytically active state. This effect is diminished when aromatic residues are mutated out, suggesting the importance of π-stacking and π-cation interactions for stabilization. Our results underscore how unexplored enzyme-support interactions may enable uncharted opportunities for using enzymes in industrial biotransformations.
Collapse
|
4
|
Tuning Polymer Composition Leads to Activity-Stability Tradeoff in Enzyme-Polymer Conjugates. Biomacromolecules 2023; 24:4033-4041. [PMID: 37610792 DOI: 10.1021/acs.biomac.3c00396] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 08/24/2023]
Abstract
Protein-polymer conjugation provides an opportune means to adjust the local environment of proteins and enhance protein stability, performance, and solubility. Although much attention has been focused on tuning protein-polymer interactions, the properties of polymer-modified proteins may also be altered by polymer-polymer interactions. Herein, we sought to better understand the influence of polymer-polymer interactions on Candida rugosa lipase, which was modified with random co-polymers composed of sulfobetaine methacrylate (SBMA) and poly(ethylene glycol) methacrylate (PEGMA). Our findings suggest that there is an apparent activity-stability tradeoff as a function of polymer composition. Specifically, as the ratio of SBMA to PEGMA increased, lipase stability was enhanced, whereas activity decreased. By tuning the monomer ratio, we showed that lipase productivity could be optimized. These findings are discussed in the context of complex enzyme-polymer and polymer-polymer interactions and ultimately may enable more informed conjugate designs and improved enzyme productivity in industrial biotransformations under harsh or extreme conditions.
Collapse
|
5
|
Framework for Optimizing Polymeric Supports for Immobilized Biocatalysts by Computational Analysis of Enzyme Surface Hydrophobicity. ACS Catal 2023. [DOI: 10.1021/acscatal.3c00264] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/17/2023]
|
6
|
Tuning the surface charge of phospholipid bilayers inhibits insulin fibrilization. Colloids Surf B Biointerfaces 2022; 220:112904. [PMID: 36265317 PMCID: PMC10164472 DOI: 10.1016/j.colsurfb.2022.112904] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/24/2022] [Revised: 09/27/2022] [Accepted: 10/02/2022] [Indexed: 11/27/2022]
Abstract
The interactions between proteins and materials, in particular lipid bilayers, have been studied extensively for their relevance in diseases and for the formulation of protein-based therapeutics and vaccines. However, the precise rules by which material properties induce favorable or unfavorable structural states in biomolecules are incompletely understood, and as a result, the rational design of materials remains challenging. Here, we investigated the influence of lipid bilayers (in the form of small unilamellar vesicles) on the formation of insulin amyloid fibrils using a fibril-specific assay (thioflavin T), polyacrylamide gel electrophoresis, and circular dichroism spectroscopy. Lipid bilayers composed of equal mixtures of cationic and anionic lipids effectively inhibited fibril formation and stabilized insulin in its native conformation. However, other lipid bilayer compositions failed to inhibit fibril formation or even destabilized insulin, exacerbating fibrilization and/or non-amyloid aggregation. Our findings suggest that electrostatic interactions with lipid bilayers can play a critical role in stabilizing or destabilizing insulin, and preventing the conversion of insulin to its amyloidogenic, disease-associated state.
Collapse
|
7
|
Biocatalytic 3D Actuation in Liquid Crystal Elastomers via Enzyme Patterning. ACS APPLIED MATERIALS & INTERFACES 2022; 14:26480-26488. [PMID: 35652291 DOI: 10.1021/acsami.2c05802] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Liquid crystal elastomers (LCEs) are stimuli-responsive materials that undergo large shape transformations after undergoing an order-disorder transition. While shape reconfigurations in LCEs are predominantly triggered by heat, there is a considerable interest in developing highly specific triggers that work at room temperature. Herein, we report the fabrication of biocatalytic LCEs that respond to the presence of urea by covalently immobilizing urease within chemically responsive LCE networks. The hydrogen-bonded LCEs developed in this work exhibited contractile strains of up to 36% upon exposure to a base. Notably, the generation of ammonia by immobilized urease triggered a disruption in the supramolecular network and a large reduction of liquid crystalline order in the films when the LCEs were exposed to urea. This reduction in order was macroscopically translated into a strain response that could be modulated by changing the concentration of urea or exposure time to the substrate. Local control of the mechanical response of the LCE was realized by spatially patterning the enzyme on the surface of the films. Subsequent exposure of enzymatically patterned LCE to urea-triggered 3D shape transformations into a curl, arch, or accordion-like structure, depending on the motif patterned on the film surface. Furthermore, we showed that the presence of salt was critical to prevent bridging of the network by the presence of ammonium ions, thereby enabling such macroscopic 3D shape changes. The large actuation potential of LCEs and the ability to translate the biocatalytic activity of enzymes to macroscopic 3D shape transformations could enable use in applications ranging from cell culture, medicine, or antifouling.
Collapse
|
8
|
Quantification of Metabolic Products from Microbial Hosts in Complex Media Using Optically Diffracting Hydrogels. ACS APPLIED BIO MATERIALS 2022; 5:1252-1258. [PMID: 35166523 DOI: 10.1021/acsabm.1c01267] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
We herein describe a highly versatile platform approach for the in situ and real-time screening of microbial biocatalysts for enhanced production of bioproducts using photonic crystal hydrogels. This approach was demonstrated by preparing optically diffracting films based on polymerized N-isopropylacrylamide that contracted in the presence of alcohols and organic acids. The hydrogel films were prepared in a microwell plate format, which allows for high-throughput screening, and characterized optically using a microwell plate reader. While demonstrating the ability to detect a broad range of relevant alcohols and organic acids, we showed that the response of the films correlated strongly with the octanol-water partition coefficient (log P) of the analyte. Differences in the secretion of ethanol and succinic acid from strains of Zymomonas mobilis and Actinobacillus succinogenes, respectively, were further detected via optical characterization of the films. These differences, which in some cases were as low as ∼3 g/L, were confirmed by high-performance liquid chromatography, thereby demonstrating the sensitivity of this approach. Our findings highlight the potential utility of this multiplexed approach for the detection of small organic analytes in complex biological media, which overcomes a major challenge in conventional optical sensing methods.
Collapse
|
9
|
Chemically Triggered Changes in Mechanical Properties of Responsive Liquid Crystal Polymer Networks with Immobilized Urease. J Am Chem Soc 2021; 143:16740-16749. [PMID: 34590861 DOI: 10.1021/jacs.1c08216] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
Liquid crystal polymer networks (LCNs) are stimuli-responsive materials that can be programmed to realize spatial variation in mechanical response and undergo shape transformation. Herein, we report a process to introduce chemical specificity to the stimuli response of LCNs by integrating enzymes as molecular triggers. Specifically, the enzyme urease was immobilized in LCN films via acyl fluoride conjugation chemistry. Activity assays and confocal fluorescence imaging confirmed retention of urease activity after immobilization as well as widespread distribution of enzyme on the film. The addition of urea triggered a response in the LCN whereby newly generated ammonia reacted with free acyl fluorides to form benzamide moieties. These moieties were capable of dimerizing through the formation of supramolecular hydrogen bonds, which was reflected in a 4-fold increase in Young's modulus. Through dynamic mechanical analysis and calorimetry, we further confirmed that the degree of hydrogen bonding in the LCNs could be judiciously designed to fine-tune the mechanical properties and glass transition temperature. These findings demonstrate the untapped potential of biochemical mechanisms as molecular triggers in LCNs and open the door to the use of nucleophilic chemistries in modulating the mechanical properties of LCNs.
Collapse
|
10
|
Understanding Design Rules for Optimizing the Interface between Immobilized Enzymes and Random Copolymer Brushes. ACS APPLIED MATERIALS & INTERFACES 2021; 13:26694-26703. [PMID: 34081428 DOI: 10.1021/acsami.1c02443] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
A long-standing goal in the field of biotechnology is to develop and understand design rules for the stabilization of enzymes upon immobilization to materials. While immobilization has sometimes been successful as a strategy to stabilize enzymes, the design of synthetic materials that stabilize enzymes remains largely empirical. We sought to overcome this challenge by investigating the mechanistic basis for the stabilization of immobilized lipases on random copolymer brush surfaces comprised of poly(ethylene glycol) methacrylate (PEGMA) and sulfobetaine methacrylate (SBMA), which represent novel heterogeneous supports for immobilized enzymes. Using several related but structurally diverse lipases, including Bacillus subtilis lipase A (LipA), Rhizomucor miehei lipase, Candida rugosa lipase, and Candida antarctica lipase B (CALB), we showed that the stability of each lipase at elevated temperatures was strongly dependent on the fraction of PEGMA in the brush layer. This dependence was explained by developing and applying a new algorithm to quantify protein surface hydrophobicity, which involved using unsupervised cluster analysis to identify clusters of hydrophobic atoms. Characterization of the lipases showed that the optimal brush composition correlated with the free energy of solvation per enzyme surface area, which ranged from -17.1 kJ/mol·nm2 for LipA to -11.8 kJ/mol·nm2 for CALB. Additionally, using this algorithm, we found that hydrophobic patches consisting of aliphatic residues had a higher free energy than patches consisting of aromatic residues. By providing the basis for rationally tuning the interface between enzymes and materials, this understanding will transform the use of materials to reliably ruggedize enzymes under extreme conditions.
Collapse
|
11
|
Abstract
During integration into materials, the inactivation of enzymes as a result of their interaction with nanometer size denaturing "hotspots" on surfaces represents a critical challenge. This challenge, which has received far less attention than improving the long-term stability of enzymes, may be overcome by limiting the exploration of surfaces by enzymes. One way this may be accomplished is through increasing the rate constant of the surface ligation reaction and thus the probability of immobilization with reactive surface sites (i.e., ligation efficiency). Here, the connection between ligation reaction efficiency and the retention of enzyme structure and activity was investigated by leveraging the extremely fast reaction of strained trans-cyclooctene (sTCOs) and tetrazines (Tet). Remarkably, upon immobilization via Tet-sTCO chemistry, carbonic anhydrase (CA) retained 77% of its solution-phase activity, while immobilization via less efficient reaction chemistries, such as thiol-maleimide and azide-dibenzocyclooctyne, led to activity retention of only 46% and 27%, respectively. Dynamic single-molecule fluorescence tracking methods further revealed that longer surface search distances prior to immobilization (>0.5 μm) dramatically increased the probability of CA unfolding. Notably, the CA distance to immobilization was significantly reduced through the use of Tet-sTCO chemistry, which correlated with the increased retention of structure and activity of immobilized CA compared to the use of slower ligation chemistries. These findings provide an unprecedented insight into the role of ligation reaction efficiency in mediating the exploration of denaturing hotspots on surfaces by enzymes, which, in turn, may have major ramifications in the creation of functional biohybrid materials.
Collapse
|
12
|
Substitution of distal and active site residues reduces product inhibition of E1 from Acidothermus Cellulolyticus. Protein Eng Des Sel 2021; 34:6476618. [PMID: 34935952 DOI: 10.1093/protein/gzab031] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/22/2021] [Revised: 09/22/2021] [Accepted: 11/13/2021] [Indexed: 11/14/2022] Open
Abstract
Cellulases are largely afflicted by inhibition from their reaction products, especially at high-substrate loading, which represents a major challenge for biomass processing. This challenge was overcome for endoglucanase 1 (E1) from Acidothermus cellulolyticus by identifying a large conformational change involving distal residues upon binding cellobiose. Having introduced alanine substitutions at each of these residues, we identified several mutations that reduced cellobiose inhibition of E1, including W212A, W213A, Q247A, W249A and F250A. One of the mutations (W212A) resulted in a 47-fold decrease in binding affinity of cellobiose as well as a 5-fold increase in the kcat. The mutation further increased E1 activity on Avicel and dilute-acid treated corn stover and enhanced its productivity at high-substrate loadings. These findings were corroborated by funnel metadynamics, which showed that the W212A substitution led to reduced affinity for cellobiose in the +1 and +2 binding sites due to rearrangement of key cellobiose-binding residues.
Collapse
|
13
|
Abstract
While loop motifs frequently play a major role in protein function, our understanding of how to rationally engineer proteins with novel loop domains remains limited. In the absence of rational approaches, the incorporation of loop domains often destabilizes proteins, thereby requiring massive screening and selection to identify sites that can accommodate loop insertion. We developed a computational strategy for rapidly scanning the entire structure of a scaffold protein to determine the impact of loop insertion at all possible amino acid positions. This approach is based on the Rosetta kinematic loop modeling protocol and was demonstrated by identifying sites in lipase that were permissive to insertion of the LAP peptide. Interestingly, the identification of permissive sites was dependent on the contribution of the residues in the near-loop environment on the Rosetta score and did not correlate with conventional structural features (e.g., B-factors). As evidence of this, several insertion sites (e.g., following residues 17, 47-49, and 108), which were predicted and confirmed to be permissive, interrupted helices, while others (e.g., following residues 43, 67, 116, 119, and 121), which are situated in loop regions, were nonpermissive. This approach was further shown to be predictive for β-glucosidase and human phosphatase and tensin homologue (PTEN), and to facilitate the engineering of insertion sites through in silico mutagenesis. By enabling the design of loop-containing protein libraries with high probabilities of soluble expression, this approach has broad implications in many areas of protein engineering, including antibody design, improving enzyme activity, and protein modification.
Collapse
|
14
|
Abstract
While many approaches to reduce fibrillation of amyloid-β (Aβ) have been aimed at slowing fibril formation, the degradation of fibrils remains challenging. We provide insight into fibril degradation as well as the inhibition of fiber formation by lipid vesicles composed of 1,2-dioleoyl-sn-glycero-3-phosphocholine and 1,2-dioleoyl-sn-glycero-3-phospho-(1'-rac-glycerol). In the presence of vesicles with the optimal lipid composition, fibril formation was inhibited up to 76%. Additionally, by tuning the lipid composition, mature fibril content decreased up to 74% and the β-sheet content of Aβ was significantly reduced. The reduction in fibril and β-sheet content was consistent with a decrease in fibril diameter and could be attributed to the chaperone-like activity of the mixed vesicles. While demonstrating this remarkable activity, our findings present new evidence that lipid composition has a significant effect on the strength of the interaction between lipid bilayers and Aβ peptides/fibrils. This understanding has intriguing therapeutic implications in treating protein misfolding diseases.
Collapse
|
15
|
Abstract
Abstract
Introduction
Empirically supported treatments for pediatric sleep problems exist but many families turn to other sources for help with their child’s sleep, such as smartphone applications (apps). Sleep apps are easy for families to access but little evidence exists regarding the validity of the services and information provided. The goal of this study was to examine the features and claims of sleep apps for children.
Methods
A search of the Apple iTunes store and Google Play Store was conducted using the terms “kids sleep” and “baby sleep”. 635 apps were initially identified. Apps were excluded if they were not specifically for children (n=163), not for sleep (n=152), or if they had <100,000 downloads (n=246). Content analyses were used to assess the apps functions, claims, and evidence base.
Results
A total of 74 apps were examined of which only 4% offered sleep improvement strategies. The majority were sound and light apps (77%) and 19% were bedtime games/stories. The apps were highly rated (average 4.4 out of 5) and most were free (54%); the price of paid apps ranged from $0.99 to $119.99 (annual subscription). Only 2 apps were identified as containing empirical evidence, and all of the apps featuring games and stories to be used as part of the bedtime routine are in opposition to the recommendation to avoid the melatonin-suppressing effect of electronics/bright light before bedtime. Despite this, many apps boasted claims that they will help children “fall asleep instantly,” “cry less and sleep better,” or improve child development.
Conclusion
A large variety of sleep applications exist aimed for use with children. Many boast claims that cannot be supported by empirical evidence, and indeed may be in opposition to research support. Collaboration between sleep researchers and technology developers may be beneficial for the creation of evidence-supported apps to help with children’s sleep.
Support
N/A
Collapse
|
16
|
Polyelectrolyte Multilayers Enhance the Dry Storage and pH Stability of Physically Entrapped Enzymes. ACS APPLIED MATERIALS & INTERFACES 2020; 12:22640-22649. [PMID: 32352745 DOI: 10.1021/acsami.0c04964] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Polyelectrolyte multilayers (PEMs) are attractive materials for immobilizing enzymes due to their unique ionic environment, which can prevent unfolding. Here, we demonstrated that the stability to dry storage and elevated pH were significantly enhanced when negatively charged nitroreductase (NfsB) was embedded in a PEM by depositing alternating layers of the enzyme and polycation (PC) onto porous silica particles. The PC strength (i.e., pKa) and the surface charge of the film were varied to probe the effects that internal and surface chemistry had on the pH stability of the entrapped NfsB. All films showed enhanced activity retention at elevated pH (>6), and inactivation at reduced pH (<6) similar to NfsB in solution, indicating that the primary stabilizing effect of immobilization was achieved through ionic interactions between NfsB and the PC and not through changes to the surface charge of the NfsB. Additionally, films that were stored dry at 4 °C for 1 month retained full activity, while those stored at room temperature lost 30% activity. Remarkably, at 50 °C, above the NfsB melting temperature, 40% activity was retained after 1 month of dry storage. Our results suggest that internal film properties are significantly more important than surface charge, which had minor effects on activity. Specifically, immobilization with the weak PC, poly(l-lysine), increased the optimal pH and the activity of immobilized NfsB (which we attribute to greater permeability), relative to immobilization with the strong PC, poly(diallyldimethylammonium chloride). However, NfsB was leached from the PLL film to a greater extent. Overall, these observations demonstrate that internal ionic cross-linking is key to the stabilizing effects of PEMs and that the pH response can be tuned by controlling the number of cross-links (e.g., by changing the strength of the PC). However, this may be at the cost of reduced loading, illustrating the necessity of simultaneously optimizing enzyme loading, internal ionic cross-linking, and substrate transport.
Collapse
|
17
|
Abstract
In E. coli, editing efficiency with Cas9-mediated recombineering varies across targets due to differences in the level of Cas9:gRNA-mediated DNA double-strand break (DSB)-induced cell death. We found that editing efficiency with the same gRNA and repair template can also change with target position, cas9 promoter strength, and growth conditions. Incomplete editing, off-target activity, nontargeted mutations, and failure to cleave target DNA even if Cas9 is bound also compromise editing efficiency. These effects on editing efficiency were gRNA-specific. We propose that differences in the efficiency of Cas9:gRNA-mediated DNA DSBs, as well as possible differences in binding of Cas9:gRNA complexes to their target sites, account for the observed variations in editing efficiency between gRNAs. We show that editing behavior using the same gRNA can be modified by mutating the gRNA spacer, which changes the DNA DSB activity. Finally, we discuss how variable editing with different gRNAs could limit high-throughput applications and provide strategies to overcome these limitations.
Collapse
|
18
|
CRISPR/Cas9 recombineering-mediated deep mutational scanning of essential genes in Escherichia coli. Mol Syst Biol 2020; 16:e9265. [PMID: 32175691 PMCID: PMC7073797 DOI: 10.15252/msb.20199265] [Citation(s) in RCA: 16] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/26/2019] [Revised: 02/12/2020] [Accepted: 02/13/2020] [Indexed: 01/14/2023] Open
Abstract
Deep mutational scanning can provide significant insights into the function of essential genes in bacteria. Here, we developed a high-throughput method for mutating essential genes of Escherichia coli in their native genetic context. We used Cas9-mediated recombineering to introduce a library of mutations, created by error-prone PCR, within a gene fragment on the genome using a single gRNA pre-validated for high efficiency. Tracking mutation frequency through deep sequencing revealed biases in the position and the number of the introduced mutations. We overcame these biases by increasing the homology arm length and blocking mismatch repair to achieve a mutation efficiency of 85% for non-essential genes and 55% for essential genes. These experiments also improved our understanding of poorly characterized recombineering process using dsDNA donors with single nucleotide changes. Finally, we applied our technology to target rpoB, the beta subunit of RNA polymerase, to study resistance against rifampicin. In a single experiment, we validate multiple biochemical and clinical observations made in the previous decades and provide insights into resistance compensation with the study of double mutants.
Collapse
|
19
|
Reduced Enzyme Dynamics upon Multipoint Covalent Immobilization Leads to Stability-Activity Trade-off. J Am Chem Soc 2020; 142:3463-3471. [DOI: 10.1021/jacs.9b11707] [Citation(s) in RCA: 46] [Impact Index Per Article: 11.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/06/2023]
|
20
|
Protein adsorption measurements on low fouling and ultralow fouling surfaces: A critical comparison of surface characterization techniques. Acta Biomater 2020; 102:169-180. [PMID: 31731023 DOI: 10.1016/j.actbio.2019.11.019] [Citation(s) in RCA: 19] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/11/2019] [Revised: 10/23/2019] [Accepted: 11/08/2019] [Indexed: 01/07/2023]
Abstract
Ultralow protein fouling behavior is a common target for new high-performance materials. Ultralow fouling is often defined based on the amount of irreversibly adsorbed protein (< 5 ng cm-2) measured by a surface ensemble averaging method. However, protein adsorption at solid interfaces is a dynamic process involving multiple steps, which may include adsorption, desorption, and irreversible protein denaturation. In order to better optimize the performance of antifouling surfaces, it is imperative to fully understand how proteins interact with surfaces, including kinetics of adsorption and desorption, conformation, stability, and amount of adsorbed proteins. Defining ultralow fouling surfaces based on a measurement at or near the limit of detection of a surface-averaged measurement may not capture all of this behavior. Single-molecule microscopy techniques can resolve individual protein-surface interactions with high temporal and spatial resolution. This information can be used to tune the properties of surfaces to better resist protein adsorption. In this work, we demonstrate how combining surface plasmon resonance, X-ray photoelectron spectroscopy, atomic force microscopy, and single-molecule localization microscopy provides a more complete picture of protein adsorption on low fouling and ultralow fouling polyelectrolyte multilayer and polymer brush surfaces, over different regimes of protein concentration. In this case, comparing the surfaces using surface plasmon resonance alone is insufficient to rank their resistance to protein adsorption. Our results suggest a revision of the accepted definition of ultralow fouling surfaces is timely: with the advent of time-resolved studies of protein adsorption kinetics at the single-molecule level, it is neither necessary nor sufficient to rely on a surface averaging techniques to qualify ultralow fouling surfaces. Since protein adsorption is a dynamic process, understanding how surface properties affect the kinetics of protein adsorption will enable the design of future generations of advanced antifouling materials. STATEMENT OF SIGNIFICANCE: The design of ultralow fouling surfaces is often optimized based on a single surface-averaging technique measuring the amount of irreversibly adsorbed protein. This work provides a critical comparison of alternative techniques for evaluating protein adsorption on low fouling and ultralow fouling surfaces, and demonstrates how additional information about the dynamics of protein-surface interactions at the interface can be obtained by application of single-molecule microscopy. This approach could be used to better elucidate mechanisms of protein resistance and design principles for advanced ultralow fouling materials.
Collapse
|
21
|
Stabilization of Fibronectin by Random Copolymer Brushes Inhibits Macrophage Activation. ACS APPLIED BIO MATERIALS 2019; 2:4698-4702. [DOI: 10.1021/acsabm.9b00815] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022]
|
22
|
Abstract
In this Letter, we report that surface-bound nanobubbles reduce protein denaturation on methylated glass by irreversible protein shell formation. Single-molecule total internal reflection fluorescence (SM-TIRF) microscopy was combined with intramolecular Förster resonance energy transfer (FRET) to study the conformational dynamics of nitroreductase (NfsB) on nanobubble-laden methylated glass surfaces, using reflection brightfield microscopy to register nanobubble locations with NfsB adsorption. First, NfsB adsorbed irreversibly to nanobubbles with no apparent desorption after 5 h. Moreover, virtually all (96%) of the NfsB molecules that interacted with nanobubbles remained folded, whereas less than 50% of NfsB molecules remained folded in the absence of nanobubbles on unmodified silica or methylated glass surfaces. This trend was confirmed by ensemble-average fluorometer TIRF experiments. We hypothesize that nanobubbles reduce protein damage by passivating strongly denaturing topographical surface defects. Thus, nanobubble stabilization on surfaces may have important implications for antifouling surfaces and improving therapeutic protein storage.
Collapse
|
23
|
Dramatic Increase in Catalytic Performance of Immobilized Lipases by Their Stabilization on Polymer Brush Supports. ACS Catal 2019. [DOI: 10.1021/acscatal.9b01176] [Citation(s) in RCA: 21] [Impact Index Per Article: 4.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/19/2022]
|
24
|
Abstract
Protein bioconjugation benefits from precise regional and temporal control. One notable way of achieving this control is through the enzymatic attachment of bioorthogonal reactive handles to peptide recognition sequences that are genetically fused to target proteins of interest. The lipoic acid ligase variant, LplAW37V, functionalizes proteins by covalently attaching an azide-bearing lipoic acid derivative to a 13-amino acid recognition sequence known as the lipoic acid ligase acceptor peptide (LAP). Once attached, the azide group can be modified with diverse chemical entities through azide-alkyne click chemistry, enabling conjugation of chemical probes such as fluorophores and facilitating polymer attachment, glycosylation, and protein immobilization in addition to many other possible chemical modifications. The versatility of the attached azide group is complemented by the modular nature of the LAP sequence, which can be introduced within a protein at internal and/or terminal sites as well as at multiple sites simultaneously. In this chapter we describe the in vitro LplAW37V-mediated ligation of 10-azidodecanoic acid to a LAP-containing target protein (i.e., green fluorescent protein (GFP)) and the characterization of the ligation reaction products. Additionally, methods for the modification and immobilization of azide-functionalized LAP-GFP are discussed.
Collapse
|
25
|
Exploiting the Benefits of Homogeneous and Heterogeneous Biocatalysis: Tuning the Molecular Interaction of Enzymes with Solvents via Polymer Modification. ACS Catal 2018. [DOI: 10.1021/acscatal.8b03779] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
|
26
|
Abstract
Many nanobiotechnology applications rely on stable and efficient integration of functional biomacromolecules with synthetic nanomaterials. Unfortunately, the reasons for the ubiquitous loss of activity of immobilized enzymes remain poorly understood due to the difficulty in distinguishing between distinct molecular-level mechanisms. Here, we employ complementary single-molecule fluorescence methods that independently measure the impact of immobilization on the structure and function ( i. e., substrate binding kinetics) of nitroreductase (NfsB). Stochastic statistical modeling methods were used to unambiguously quantify the effects of immobilized NfsB structural dynamics on function, allowing us to explicitly separate effects due to conformation and accessibility. Interestingly, we found that nonspecifically tethered NfsB exhibited enhanced stability compared to site-specifically tethered NfsB; however, the folded state of site-specifically tethered NfsB had faster substrate binding rates, suggesting improved active site accessibility. This demonstrated an unexpected intrinsic trade-off associated with competing bioconjugation methods, suggesting that it may be necessary to balance conformational stability versus active site accessibility. This nuanced view of the impact of immobilization will facilitate a rational approach to the integration of enzymes with synthetic nanomaterials.
Collapse
|
27
|
Stabilization of Immobilized Enzymes via the Chaperone-Like Activity of Mixed Lipid Bilayers. ACS APPLIED MATERIALS & INTERFACES 2018; 10:19504-19513. [PMID: 29767959 DOI: 10.1021/acsami.8b05523] [Citation(s) in RCA: 19] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
Biomimetic lipid bilayers represent intriguing materials for enzyme immobilization, which is critical for many biotechnological applications. Here, through the creation of mixed lipid bilayers, the retention of immobilized enzyme structures and catalytic activity are dramatically enhanced. The enhancement in the retention of enzyme structures, which correlated with an increase in enzyme activity, is observed using dynamic single-molecule (SM) fluorescence methods. The results of SM analysis specifically show that lipid bilayers composed of mixtures of 1,2-dioleoyl- sn-glycero-3-phosphocholine (DOPC) and 1,2-dioleoyl- sn-glycero-3-phospho-(1'- rac-glycerol) (DOPG) stabilize the folded state of nitroreductase (NfsB), increasing the rate of refolding relative to unfolding of enzyme molecules on the bilayer surface. Remarkably, for optimal compositions with 15-50% DOPG, over 95% of NfsB remains folded while the activity of the enzyme is increased as much as 2 times over that in solution. Within this range of DOPG, the strength of the interaction of folded and unfolded NfsB with the bilayer surface was also significantly altered, which was evident by the change in the diffusion of folded and unfolded NfsB in the bilayer. Ultimately, these findings provide direct evidence for the chaperone-like activity of mixed DOPG/DOPC lipid bilayers, which can be controlled by tuning the fraction of DOPG in the bilayer.
Collapse
|
28
|
Grafting Density Impacts Local Nanoscale Hydrophobicity in Poly(ethylene glycol) Brushes. ACS Macro Lett 2018; 7:498-503. [PMID: 35619349 DOI: 10.1021/acsmacrolett.8b00004] [Citation(s) in RCA: 30] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/20/2022]
Abstract
Accumulated single-molecule observations of a fluorescent solvatochromic probe molecule were found to provide detailed local information about nanoscale hydrophobicity in polymer brushes. Using this approach, we showed that local hydrophobicity in poly(ethylene glycol) (PEG) brushes was spatially heterogeneous and increased with the surface grafting density of the polymer chains. These findings may provide an explanation for prior observations of the denaturation of surface-adsorbed proteins on PEG brushes with high grafting densities, which is believed to influence protein-mediated cell-surface interactions. Moreover, by employing the broad range of existing environmentally sensitive fluorophores, this approach may potentially be used to characterize nanoscale changes in a variety of physicochemical properties within polymeric materials.
Collapse
|
29
|
Modification of Lipase with Poly(4-acryloylmorpholine) Enhances Solubility and Transesterification Activity in Anhydrous Ionic Liquids. Biomacromolecules 2018. [DOI: 10.1021/acs.biomac.8b00176] [Citation(s) in RCA: 21] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/19/2022]
|
30
|
Elucidating sequence and solvent specific design targets to protect and stabilize enzymes for biocatalysis in ionic liquids. Phys Chem Chem Phys 2018. [PMID: 28650512 DOI: 10.1039/c7cp03013d] [Citation(s) in RCA: 20] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/18/2023]
Abstract
For many different frameworks, the structure, function, and dynamics of an enzyme is largely determined by the nature of its interactions with the surrounding host environment, thus a molecular level understanding of enzyme/host interactions is essential to the design of new processes and applications. Ionic liquid (IL) solvents are a popular class of solvents in which to study enzyme behavior, yet it is still not possible to predict how a given enzyme will behave in a given IL solvent. Furthermore, a dearth of experimental data with which to evaluate simulation force fields has prevented the full integration of experimental and computational techniques to gain a complete picture of enzyme/IL interactions. Utilizing recently published crystallographic data of an enzyme in complex with an IL, this study aims to validate the use of current molecular force fields for studying enzyme/IL interactions, and to provide new mechanistic insight into enzyme stabilization in IL solvents. Classical molecular dynamics (MD) simulations have been performed on both the folded and unfolded state of Bacillus subtilis lipase A and a quadruple-mutant version of lipase A, in solutions of aqueous 1-butyl-3-methylimidazolium chloride. Results show classical MD simulations can predict the preferred surface binding locations of IL cations as well as reductions in IL anion binding to mutated surface residues with high accuracy. The results also point to a mechanistic difference between IL binding to the folded and unfolded state of an enzyme, which we call the "counter-ion effect". These findings could have important implications for future rational design efforts to stabilize enzymes in non-conventional media.
Collapse
|
31
|
Mechanism of Competitive Inhibition and Destabilization of Acidothermus cellulolyticus Endoglucanase 1 by Ionic Liquids. J Phys Chem B 2017; 121:10793-10803. [DOI: 10.1021/acs.jpcb.7b08435] [Citation(s) in RCA: 20] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
|
32
|
Enhanced Optical Sensitivity in Thermoresponsive Photonic Crystal Hydrogels by Operating Near the Phase Transition. ACS APPLIED MATERIALS & INTERFACES 2017; 9:27927-27935. [PMID: 28758737 DOI: 10.1021/acsami.7b07179] [Citation(s) in RCA: 15] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/07/2023]
Abstract
Photonic crystal hydrogels composed of analyte-responsive hydrogels and crystalline colloidal arrays have immense potential as reagentless chemical and biological sensors. In this work, we investigated a general mechanism to rationally tune the sensitivity of photonic crystal hydrogels consisting of stimuli-responsive polymers to small molecule analytes. This mechanism was based on modulating the demixing temperature of such hydrogels relative to the characterization temperature to in effect maximize the extent of phase separation behavior; thus, the volume changes in response to the target analytes. Using ethanol as a model analyte, we demonstrated that this mechanism led to a dramatic increase in the sensitivity of optically diffracting poly(N-isopropylacrylamide) (pNIPAM) hydrogel films that exhibit a lower critical solution temperature (LCST) behavior. The demixing temperature of the pNIPAM films was modulated by copolymerization of the films with relatively hydrophobic and hydrophilic comonomers, as well as by varying the ionic strength of the characterization solution. Our results showed that copolymerization of the films with 2.5 mol % of N-tert-butylacrylamide, which is hydrophobic relative to pNIPAM, enabled the detection limit of the pNIPAM films to ethanol to be lowered ∼2-fold at 30 °C. Additionally, increasing the ionic strength of the characterization solution above 200 mM resulted in a dramatic increase in the extent of contraction of the films in the presence of ethanol. Ultimately, it was demonstrated that as little as 16 g/L or 2 vol % of ethanol in water could reliably be detected, and that the sensitivity of the films to ethanol was predictably greatest when operating near the phase transition, such that even small additions of the analyte induced the start of demixing and the collapse of the hydrogel. Such a mechanism may be extended to photonic crystal hydrogel sensors prepared from other stimuli-responsive polymers and more broadly exploited to enhance the utility of these sensors for a broad range of analytes.
Collapse
|
33
|
Connecting Protein Conformation and Dynamics with Ligand-Receptor Binding Using Three-Color Förster Resonance Energy Transfer Tracking. J Am Chem Soc 2017; 139:9937-9948. [PMID: 28658579 DOI: 10.1021/jacs.7b03978] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/28/2023]
Abstract
Specific binding between biomolecules, i.e., molecular recognition, controls virtually all biological processes including the interactions between cells and biointerfaces, both natural and synthetic. Such binding often relies on the conformation of biomacromolecules, which can be highly heterogeneous and sensitive to environmental perturbations, and therefore difficult to characterize and control. An approach is demonstrated here that directly connects the binding kinetics and stability of the protein receptor integrin αvβ3 to the conformation of the ligand fibronectin (FN), which are believed to control cellular mechanosensing. Specifically, we investigated the influence of surface-adsorbed FN structure and dynamics on αvβ3 binding using high-throughput single-molecule three-color Förster resonance energy transfer (FRET) tracking methods. By controlling FN structure and dynamics through tuning surface chemistry, we found that as the conformational and translational dynamics of FN increased, the rate of binding, particularly to folded FN, and stability of the bound FN-αvβ3 complex decreased significantly. These findings highlight the importance of the conformational plasticity and accessibility of the arginine-glycine-aspartic acid (RGD) binding site in FN, which, in turn, mediates cell signaling in physiological and synthetic environments.
Collapse
|
34
|
Lipase Activation and Stabilization in Room-Temperature Ionic Liquids. METHODS IN MOLECULAR BIOLOGY (CLIFTON, N.J.) 2016; 1504:25-35. [PMID: 27770412 DOI: 10.1007/978-1-4939-6499-4_4] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Key Words] [Subscribe] [Scholar Register] [Indexed: 10/20/2022]
Abstract
Widespread interest in the use of room-temperature ionic liquids (RTILs) as solvents in anhydrous biocatalytic reactions has largely been met with underwhelming results. Enzymes are frequently inactivated in RTILs as a result of the influence of solvent on the enzyme's microenvironment, be it through interacting with the enzyme or enzyme-bound water molecules. The purpose of this chapter is to present a rational approach to mediate RTIL-enzyme interactions, which is essential if we are to realize the advantages of RTILs over conventional solvents for biocatalysis in full. The underlying premise for this approach is the stabilization of enzyme structure via multipoint covalent immobilization within a polyurethane foam matrix. Additionally, the approach entails the use of salt hydrates to control the level of hydration of the immobilized enzyme, which is critical to the activation of enzymes in nonaqueous media. Although lipase is used as a model enzyme, this approach may be effective in activating and stabilizing virtually any enzyme in RTILs.
Collapse
|
35
|
Role of Dimension and Spatial Arrangement on the Activity of Biocatalytic Cascade Reactions on Scaffolds. ACS Catal 2016. [DOI: 10.1021/acscatal.6b01302] [Citation(s) in RCA: 26] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
36
|
Maternal diet quality in pregnancy and neonatal adiposity: the Healthy Start Study. Int J Obes (Lond) 2016; 40:1056-62. [PMID: 27133623 PMCID: PMC5356926 DOI: 10.1038/ijo.2016.79] [Citation(s) in RCA: 120] [Impact Index Per Article: 15.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 07/14/2015] [Revised: 02/20/2016] [Accepted: 03/11/2016] [Indexed: 02/08/2023]
Abstract
BACKGROUND/OBJECTIVES Poor maternal diet in pregnancy can influence fetal growth and development. We tested the hypothesis that poor maternal diet quality during pregnancy would increase neonatal adiposity (percent fat mass (%FM)) at birth by increasing the fat mass (FM) component of neonatal body composition. METHODS Our analysis was conducted using a prebirth observational cohort of 1079 mother-offspring pairs. Pregnancy diet was assessed via repeated Automated Self-Administered 24-h dietary recalls, from which Healthy Eating Index-2010 (HEI-2010) scores were calculated for each mother. HEI-2010 was dichotomized into scores of ⩽57 and >57, with low scores representing poorer diet quality. Neonatal %FM was assessed within 72 h after birth with air displacement plethysmography. Using univariate and multivariate linear models, we analyzed the relationship between maternal diet quality and neonatal %FM, FM, and fat-free mass (FFM) while adjusting for prepregnancy body mass index (BMI), physical activity, maternal age, smoking, energy intake, preeclampsia, hypertension, infant sex and gestational age. RESULTS Total HEI-2010 score ranged between 18.2 and 89.5 (mean: 54.2, s.d.: 13.6). An HEI-2010 score of ⩽57 was significantly associated with higher neonatal %FM (β=0.58, 95% confidence interval (CI) 0.07-1.1, P<0.05) and FM (β=20.74; 95% CI 1.49-40.0; P<0.05) but no difference in FFM. CONCLUSIONS Poor diet quality during pregnancy increases neonatal adiposity independent of maternal prepregnancy BMI and total caloric intake. This further implicates maternal diet as a potentially important exposure for fetal adiposity.
Collapse
|
37
|
Acylase-containing polyurethane coatings with anti-biofilm activity. Biotechnol Bioeng 2016; 113:2535-2543. [DOI: 10.1002/bit.26019] [Citation(s) in RCA: 38] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/27/2016] [Revised: 05/19/2016] [Accepted: 05/22/2016] [Indexed: 11/08/2022]
|
38
|
Diet, physical activity and mental health status are associated with dysglycaemia in pregnancy: the Healthy Start Study. Diabet Med 2016; 33:663-7. [PMID: 26872289 PMCID: PMC4883104 DOI: 10.1111/dme.13093] [Citation(s) in RCA: 15] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Accepted: 02/09/2016] [Indexed: 11/26/2022]
Abstract
AIMS To examine the association between dysglycaemia and multiple modifiable factors measured during pregnancy. METHODS The Healthy Start Study collected self-reported data on modifiable factors in early and mid-pregnancy (median 17 and 27 weeks gestation, respectively) from 832 women. Women received one point for each modifiable factor for which they had optimum scores: diet quality (Healthy Eating Index score ≥64), physical activity level (estimated energy expenditure ≥170 metabolic equivalent task-h/week), and mental health status (Perceived Stress Scale score <6 and Edinburgh Postnatal Depression Scale score <13). Dysglycaemia during pregnancy was defined as an abnormal glucose challenge result, ≥1 abnormal results on an oral glucose tolerance test, or a clinical diagnosis of gestational diabetes. Logistic regression models estimated odds ratios for dysglycaemia as a function of each factor and the total score, adjusted for age, race/ethnicity, pre-pregnancy BMI, history of gestational diabetes, and family history of Type 2 diabetes. RESULTS In individual analyses, only physical activity was significantly associated with a reduced risk of dysglycaemia (adjusted odds ratio 0.67, 95% CI 0.44-1.00). We observed a significant, dose-response association between increasing numbers of optimal factors and odds of dysglycaemia (adjusted P=0.01). Compared with having no optimal modifiable factors, having all three was associated with a 73% reduced risk of dysglycaemia (adjusted odds ratio 0.27, 95% CI 0.08-0.95). CONCLUSIONS An increasing number of positive modifiable factors in pregnancy was associated with a dose-response reduction in risk of dysglycaemia. Our results support the hypothesis that modifiable factors in pregnancy are associated with the risk of prenatal dysglycaemia.
Collapse
|
39
|
Label-free detection of missense mutations and methylation differences in the p53 gene using optically diffracting hydrogels. Analyst 2016; 140:6354-62. [PMID: 26270146 DOI: 10.1039/c5an01191d] [Citation(s) in RCA: 18] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
We have developed a novel approach for DNA detection as well as genetic screening of mutations by uniquely combining DNA-responsive and optically diffracting materials. This approach entails the polymerization of a photonic crystal within a hydrogel network that alters the diffraction of light in response to a target DNA strand. The utility of this approach, which permits label-free sensing, was demonstrated via the detection of a target sequence from the DNA binding domain of the major tumor suppressor protein p53. Using a complementary capture probe strand, we were able to detect down to picomole concentrations of the target p53 sequence. Moreover, we demonstrated that this approach could readily detect a single base pair mutation in the target strand, which corresponds to the hotspot cancer mutation R175H in p53. The sensitivity of detection was increased by lowering the rate of annealing of the target strand and adjusting the solution ionic strength during optical characterization. Changes in ionic strength during characterization impact the melting temperature of the bound target DNA and the Donnan potential between the hydrogel and solution, which influence detection. We further showed that this approach is sensitive to epigenetic changes via the detection of a fully methylated form of the target p53 sequence. Ultimately, this approach represents a new paradigm for DNA detection and specifically genetic screening of p53 as well as other disease markers and nucleotide modifications that alter the properties of DNA (e.g., epigenetic alterations and adducts with chemical carcinogens).
Collapse
|
40
|
Lytic Polysaccharide Monooxygenases ScLPMO10B and ScLPMO10C Are Stable in Ionic Liquids As Determined by Molecular Simulations. J Phys Chem B 2016; 120:3863-72. [DOI: 10.1021/acs.jpcb.6b01688] [Citation(s) in RCA: 15] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
41
|
Dense Poly(ethylene glycol) Brushes Reduce Adsorption and Stabilize the Unfolded Conformation of Fibronectin. Biomacromolecules 2016; 17:1017-25. [PMID: 26866385 DOI: 10.1021/acs.biomac.5b01657] [Citation(s) in RCA: 52] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/07/2023]
Abstract
Polymer brushes, in which polymers are end-tethered densely to a grafting surface, are commonly proposed for use as stealth coatings for various biomaterials. However, although their use has received considerable attention, a mechanistic understanding of the impact of brush properties on protein adsorption and unfolding remains elusive. We investigated the effect of the grafting density of poly(ethylene glycol) (PEG) brushes on the interactions of the brush with fibronectin (FN) using high-throughput single-molecule tracking methods, which directly measure protein adsorption and unfolding within the brush. We observed that, as grafting density increased, the rate of FN adsorption decreased; however, surface-adsorbed FN unfolded more readily, and unfolded molecules were retained on the surface for longer residence times relative to those of folded molecules. These results, which are critical for the rational design of PEG brushes, suggest that there is a critical balance between protein adsorption and conformation that underlies the utility of such brushes in physiological environments.
Collapse
|
42
|
Abstract
Surface-induced protein denaturation has important implications for the development of materials that are resistant and/or innocuous to biomolecules. Here, we studied the mechanism of lysozyme (T4L) unfolding on fused silica (FS) using single-molecule methods that provided direct insight into the cause of denaturation. Unfolding of T4L was monitored by Förster resonance energy transfer while simultaneously tracking the adsorption, diffusion, and desorption of individual molecules at the solid-solution interface. Results of high-throughput single-molecule analysis suggested that the unfolding of T4L on FS was mediated by surface diffusion and occurred on isolated nanoscale sites, which were relatively rare and distinct from the majority of the surface. These observations suggest that surface-mediated protein unfolding is a search process that is based on the exploration for denaturing sites by the protein. Ultimately, these findings have important implications for the design of protein-compatible surfaces.
Collapse
|
43
|
Crystallographic Investigation of Imidazolium Ionic Liquid Effects on Enzyme Structure. Chembiochem 2015; 16:2456-9. [PMID: 26388426 DOI: 10.1002/cbic.201500398] [Citation(s) in RCA: 24] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/04/2015] [Indexed: 01/11/2023]
Abstract
We present the first crystallographic insight into the interactions of an ionic liquid (IL) with an enzyme, which has widespread implications for stabilizing enzymes in IL media for biocatalysis. Structures of Bacillus subtilis lipase A (lipA) and an IL-stable variant (QM-lipA) were obtained in the presence of increasing concentrations of 1-butyl-3-methylimidazolium chloride ([BMIM][Cl]). These studies revealed that the [BMIM] cation interacts with surface residues through hydrophobic and cation-π interactions. Of specific interest was the disruption of internal stacking interactions of aromatic side chains by [BMIM], which provides structural evidence for the mechanism of enzyme denaturation by ILs. The interaction of [BMIM] and Cl ions with lipA was reduced by the stabilizing mutations Y49E and G158E in QM-lipA. Ultimately, these findings present the molecular basis for stabilizing enzymes from IL-induced inactivation, as well as the selection of ILs that are less denaturing.
Collapse
|
44
|
Abstract
Approaches that allow bioorthogonal and, in turn, site-specific chemical modification of proteins present considerable opportunities for modulating protein activity and stability. However, the development of such approaches that enable site-selective modification of proteins at multiple positions, including internal sites within a protein, has remained elusive. To overcome this void, we have developed an enzymatic approach for multisite clickable modification based on the incorporation of azide moieties in proteins using lipoic acid ligase (LplA). The ligation of azide moieties to the model protein, green fluorescent protein (GFP), at the N-terminus and two internal sites using lipoic acid ligase was shown to proceed efficiently with near-complete conversion. Modification of the ligated azide groups with poly(ethylene glycol) (PEG), α-d-mannopyranoside, and palmitic acid resulted in highly homogeneous populations of protein-polymer, protein-sugar, and protein-fatty acid conjugates. The homogeneity of the conjugates was confirmed by mass spectrometry (MALDI-TOF) and SDS-PAGE electrophoresis. In the case of PEG attachment, which involved the use of strain-promoted azide-alkyne click chemistry, the conjugation reaction resulted in highly homogeneous PEG-GFP conjugates in less than 30 min. As further demonstration of the utility of this approach, ligated GFP was also covalently immobilized on alkyne-terminated self-assembled monolayers. These results underscore the potential of this approach for, among other applications, site-specific multipoint protein PEGylation, glycosylation, fatty acid modification, and protein immobilization.
Collapse
|
45
|
Optically diffracting hydrogels for screening kinase activity in vitro and in cell lysate: impact of material and solution properties. Anal Chem 2015; 87:3467-75. [PMID: 25714913 DOI: 10.1021/acs.analchem.5b00442] [Citation(s) in RCA: 19] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/05/2023]
Abstract
Optically diffracting films based on hydrogel-encapsulated crystalline colloidal arrays have considerable utility as sensors for detecting enzymaticphosphorylation and, thus, in screening small molecule modulators of kinases. In this work, we have investigated the impact of hydrogel properties, as well as the role of the ionic character of the surrounding environment, on the optical sensitivity of kinase responsive crystalline colloidal array-containing hydrogels. In agreement with a model of hydrogel swelling, the optical sensitivity of such materials increased as the shear modulus and the Flory-Huggins interaction parameter between polymer and solvent decreased. Additionally, elimination of extraneous charges in the polymer backbone by exploiting azide-alkyne click chemistry to functionalize the hydrogels with a peptide substrate for protein kinase A further enhanced the sensitivity of the optically diffracting films. Increasing peptide concentration and, in turn, immobilized charge within the hydrogel network was shown to increase the optical response over a range of ionic strength conditions. Ultimately, we showed that, by tuning the hydrogel and solution properties, as little as 0.1 U/μL protein kinase A could be detected in short reaction times (i.e., 2 h), which is comparable to conventional biochemical kinase assays. We further showed that this approach can be used to detect protein kinase A activity in lysate from HEK293 cells. The sensitivity of the resulting films, coupled with the advantages of photonic crystal based sensors (e.g., label free detection), makes this approach highly attractive for screening enzymatic phosphorylation.
Collapse
|
46
|
Molecular dynamics investigation of the ionic liquid/enzyme interface: Application to engineering enzyme surface charge. Proteins 2015; 83:670-80. [DOI: 10.1002/prot.24757] [Citation(s) in RCA: 45] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/09/2014] [Revised: 12/17/2014] [Accepted: 12/31/2014] [Indexed: 12/17/2022]
|
47
|
Linking the foreign body response and protein adsorption to PEG-based hydrogels using proteomics. Biomaterials 2015; 41:26-36. [PMID: 25522962 PMCID: PMC4629245 DOI: 10.1016/j.biomaterials.2014.11.026] [Citation(s) in RCA: 113] [Impact Index Per Article: 12.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/28/2014] [Revised: 10/27/2014] [Accepted: 11/08/2014] [Indexed: 12/31/2022]
Abstract
Poly(ethylene glycol) (PEG) hydrogels with their highly tunable properties are promising implantable materials, but as with all non-biological materials, they elicit a foreign body response (FBR). Recent studies, however, have shown that incorporating the oligopeptide RGD into PEG hydrogels reduces the FBR. To better understand the mechanisms involved and the role of RGD in mediating the FBR, PEG, PEG-RGD and PEG-RDG hydrogels were investigated. After a 28-day subcutaneous implantation in mice, a thinner and less dense fibrous capsule formed around PEG-RGD hydrogels, while PEG and PEG-RDG hydrogels exhibited stronger, but similar FBRs. Protein adsorption to the hydrogels, which is considered the first step in the FBR, was also characterized. In vitro experiments confirmed that serum proteins adsorbed to PEG-based hydrogels and were necessary to promote macrophage adhesion to PEG and PEG-RDG, but not PEG-RGD hydrogels. Proteins adsorbed to the hydrogels in vivo were identified using liquid chromatography-tandem mass spectrometry. The majority (245) of the total proteins (≥300) that were identified was present on all hydrogels with many proteins being associated with wounding and acute inflammation. These findings suggest that the FBR to PEG hydrogels may be mediated by the presence of inflammatory-related proteins adsorbed to the surface, but that macrophages appear to sense the underlying chemistry, which for RGD improves the FBR.
Collapse
|
48
|
|
49
|
Abstract
We have developed a novel biosensor for kinases that is based on a kinase-responsive polymer hydrogel, which enables label-free screening of kinase activity via changes in optical properties. The hydrogel is specifically designed to swell reversibly upon phosphorylation of a target peptide, triggering a change in optical diffraction from a crystalline colloidal array of particles impregnated into the hydrogel. Diffraction measurements, and charge staining, confirmed the responsive nature of the hydrogel. Moreover, the change in diffraction of the hydrogel upon treatment with kinase exhibited a time- and dose-dependent response. A theoretical model for ionic polymer networks describes the observed optical response well and can be used to quantify the extent of phosphorylation.
Collapse
|
50
|
Charge engineering of cellulases improves ionic liquid tolerance and reduces lignin inhibition. Biotechnol Bioeng 2014; 111:1541-9. [DOI: 10.1002/bit.25216] [Citation(s) in RCA: 78] [Impact Index Per Article: 7.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/17/2013] [Revised: 01/27/2014] [Accepted: 02/06/2014] [Indexed: 12/20/2022]
|