Comparison of two different multiple dual-mode counter-current chromatograph for separation of ketoconazole enantiomers

In this work, two different multiple dual-mode (MDM) counter-current chromatography methods, conventional MDM and modified MDM elution modes, were compared for the chiral separation of the ketoconazole enantiomers. The biphasic solvent system which consisted of n-hexane: isobutyl acetate: 0.1 mol/L phosphate buffer (2:4:6, v/v) (pH = 8.5) was employed as stationary phase and mobile phase. And the hydroxypropyl-β-cyclodextrin (HP-β-CD) with a concentration of 100 mmol/L was dissolved in the phosphate buffer, as the chiral selector. Under two different methods, dual-mode (DM) elution was performed to determine the time of the transformed phase roles and multiple cycles were performed to isolate ketoconazole, respectively. The result indicated that the modified MDM elution had a significant improvement on the separation, increasing the resolution from 0.51 to 1.19, while the resolution was increased from 0.40 to 0.79 by the conventional MDM elution. Ultimately, baseline separation of ketoconazole enantiomers was essentially achieved by high-speed counter-current chromatography under optimized modified MDM separation conditions. The final recoveries of the two enantiomers, R-(K) and S-(K), were 92.5 % and 83.3 %, respectively, corresponding to enantiomeric excess values of 99.0 % and 97.0 %, as determined by HPLC.

Recent trends in multidimensional countercurrent chromatography

Countercurrent chromatography (CCC) is a potent separation approach known for its remarkable efficiency and capacity in preparation. It's applied as a substitute or combined with different chromatographic techniques, resulting in its rebranding as multidimensional CCC (MDCCC). Numerous essential mixtures from natural products contain hundreds or thousands of distinct components of importance. These mix types are too complicated to separate in any reasonable time using a single CCC dimension. However, if a multidimensional technique is utilized, where a complex mixture is separated by an initial dimension, smaller fractions of that separation are gathered. Each fraction is studied individually; complex mixes can be resolved relatively quickly. Thus, several MDCCC separation features have been studied to demonstrate their advantages, limitations, and prospective capacity to separate exceedingly complex mixtures. In this review, MDCCC aspects, including principles, multiple columns system, multilayer coil J-type, on-line monitoring system, and applications, have been thoroughly_explored.

Green-emitting functionalized silicon nanoparticles as an "off-on" fluorescence bio-probe for the sensitive and selective detection of mercury (II) and 3-mercaptopropionic acid

Herein, we developed a class of functionalized silicon nanoparticles (F-SiNPs) bio-probes named thiol-conjugated F-SiNPs. They combine excellent biocompatibility with small dimensions (<10 nm) and biological usefulness with sustained and robust fluorescence (3.32% photoluminescent quantum yield). Identifying 3-Mercaptopropionic acid (3-MPA), which lowers the quantity of gamma-aminobutyric acid in the brain, and mercury (Hg²⁺) was a crucially important step since their excessive levels are a sign of several disorders. Using F-SiNPs as a fluorescent bio-probe, we provided an "off-on" technique for sensitively and selectively determining Hg²⁺ and 3-MPA in this study. The 3-(2-aminoethylamino) propyl (dimethoxymethylsilane) and basic fuchsin as precursors were hydrothermally treated to produce the F-SiNPs exhibiting green fluorescence. Our results suggest that Hg²⁺ reduced the fluorescence of F-SiNPs because of strong ionic interactions and metal-ligand binding among many thiols and carboxyl groupings at the surface of Hg²⁺ and F-SiNPs. Additionally, the resultants demonstrated that after being quenched by Hg²⁺, the produced F-SiNPs led to the distinctive "off-on" response to 3-MPA. Moreover, the method could detect Hg²⁺ and 3-MPA with limits of detection of 0.065 μM and 0.017 μM, respectively. The technique employed is quick, easy, affordable, and environmentally friendly. The sensing platform has successfully determined Hg²⁺ and 3-MPA in urine, water, and human serum samples.

An overview of recent progress in multiple dual-mode counter-current chromatography

Counter-current chromatography is a chromatographic separation and purification technique being developed. The development of different elution modes has significantly contributed to this field. Multiple dual-mode elution is a method developed based on dual-mode elution, which consists of a series of changing cycles of the phase role and the direction by switching between normal and reverse elution modes of counter-current chromatography. This dual-mode elution method takes full advantage of the liquid nature of stationary and mobile phases of counter-current chromatography and effectively improves the separation efficiency. So, this unique elution mode has gained extensive attention for separating complex samples. This review mainly describes and summarizes in detail its development, applications, and characteristics in recent years. Meanwhile, its advantages, limitations, and future outlook also have been discussed in this paper.

The separation regularity of the three-phase solvent system of counter-current chromatography based on polarity parameter modeling

The three-phase solvent system of counter-current chromatography can separate compounds with a wide range of polarity, but there is no study of its separation regularity. Therefore, in this work, the separation regularity of the three-phase solvent system was initially investigated from the perspective of solvent polarities and compound polarities. The standard compounds covering a wide polarity range were selected, and three-phase solvent systems, n-hexane/methyl acetate/acetonitrile/water, and n-hexane/methyl tert-butyl ether/acetonitrile/water were used for modeling. The results showed that in the three-phase solvent system, the partition coefficient for the middle and lower phases (lgK_M/L) increased with increasing logP values in three intervals logP < 0, 0 < logP < 4, and logP > 4. In addition, the partition coefficient for the upper and middle phases (lgK_U/M) between the upper and middle phases of the small polarity compounds increases with increasing logP values. LogP vs lgK_M/L of 7 solvent systems were employed for the smoothing spline fit through a predictive model design of the curve fitting toolbox in MATLAB software, and good results were achieved. LogP versus lgK_M/L for n-hexane/methyl tert-butyl ether/acetonitrile/water solvent systems were used for the second-order power fit, and satisfactory results were obtained. The relationship between polarity parameters and separation case parameters was explored using a heat map approach. The separation regularity of the three-phase solvent system was preliminarily investigated. This regularity study gives hope of assistance to the chemists studying three-phase solvents and counter-current chromatography.

A simple approach to the prediction of soil sorption of organophosphorus pesticides

Organophosphorus pesticides (OP) affect the crops and environments, and the reliable approach to the prediction of soil sorption of pesticides is required. In this respect, we proposed a simple Chemometrics approach, in which the Tchebichef image moment (TM) method was used to extract useful information from the greyscale images of molecular structures and the quantitative model was established by stepwise regression to predict the soil sorption of OPs. Different squared correlation coefficients including the leave-one-out cross-validation (LOO-CV) (Q²) that concerns the training set and the (R²_test) which concerns the external independent test set are more than 0.96. This reflects that the established model has considerably high accuracy and reliability. Compared with the literature on the strategies of quantitative structure-property relationship (QSPR), the proposed method is more suitable, in which the established model shows a high predictive ability. Our study provides another effective approach to predict the soil sorption of OPs and also extends the innovative pathway of QSPR modelling.

Study of the controversial resveratrol that interact with the endogenous glutathione thiyl radical in cancer cells

Found in various natural food products, many in vitro evidence indicated that resveratrol (RES) has been linked to neuroprotective and cardioprotective effects and prevent cancer development. However, human clinical trials have been conducted with varying results, making the usage of RES controversial. In this paper, we demonstrated that the drug RES could be conjugated with the high levels of endogenous GS^• in cancer cells. 5,5-Dimethyl-1-Pyrroline-N-Oxide (DMPO) was employed to capture the GS^•. The molecular mechanism of the reaction between RES and GS^• was further studied by UV-Vis spectrometry, mass spectrometry and Density Functional Theory (DFT) calculations. Besides, the formation of the adduct GS-RES in cancer cell was obtained when RES was added during incubation. Further study indicated that over 77.6% of the RES was consumed in cancer cells. This study suggested that endogenous GS^• may be one of the important factors to cause the depletion of anti-tumour drugs during chemotherapy, which should be paid special attention in clinical therapeutics and drug development.

A Simple Approach to the Toxicity Prediction of Anilines and Phenols Towards Aquatic Organisms

Chemicals pollution in the environment has attracted attention all over the world, and the toxicity prediction of chemical pollutants has become quite important. In this paper, we introduce a simple approach to predict the toxicity of some chemical components, in which the Tchebichef image moment (TM) method was employed to extract useful chemical information from the images of molecular structures to establish quantitative structure-activity relationship (QSAR) prediction models. The proposed approach was applied to predict the toxicity of anilines and phenols for the aquatic organisms of P. subcapitata and V. fischeri, in which the obtained TMs were defined as the independent variables, while the biological toxicity (pEC₅₀) was regarded to be the dependent variable. Then, the predictive models were established by stepwise regression, respectively. The obtained squared correlation coefficients of leave-one-out cross-validation (Q²) for training sets and the predictive squared correlation coefficients (R_p²) for test sets of the two groups of data were higher than 0.79 and 0.75, respectively, which indicated that the obtained models possessed satisfactory accuracy and reliability. Compared with several reported methods, the proposed approach was more convenient and has a higher predictive capability. Our study provides another perspective in QSAR research.

The activity prediction of indole inhibitors against HCV NS5B polymerase

Non-structural viral protein 5B (NS5B) is a viral protein in hepatitis C virus. Although various inhibitors against NS5B have been found, the activity prediction of similar untested inhibitors is still highly desirable. In this respect, the Tchebichef moments (TMs) calculated from the images of molecular structures were regarded as the independent variables while the inhibitory activity (pIC₅₀ ) was the dependent variable, and the predictive model was established by means of stepwise regression. The R-squared of leave-one-out cross-validation (Q² ) for the training set and the R-squared of prediction ( R p 2 ) for external independent test set were 0.919 and 0.927, respectively. The obtained model was also evaluated strictly. Compared with the multivariate curve resolution with alternating least squares (MCR-ALS) and the QSAR approaches derived from the literature, the proposed method is more accurate and reliable. This study not only provides an effective approach to predict the biological activity of RNA replication's inhibitors, but also extends the QSAR modeling technique.