Development and evaluation of solid lipid nanoparticles of mometasone furoate for topical delivery

Introduction:

Solid lipid nanoparticles (SLNs) are the new generation of submicron sized lipid emulsions where liquid lipid (oil) has been substituted by solid lipid. Lipids used in the formulation are safe, stable and biodegradable in nature. SLNs offer various advantages for topical drug delivery like ability of deposition into skin with the reduced systemic exposure and reduced local side-effects along with providing sustained release of drug. Mometasone furoate (MF) is a topical glucocorticoid having anti-inflammatory, anti-pruritic, anti-hyper proliferative activity. Owing to these properties it is recommended in chronic inflammation and psoriasis. In market, MF cream and lotion (0.1%) are available, which show slight skin irritation, burning and common side-effects due to steroids.

Experimental:

To overcome the shortcomings of conventional formulations, there is a need to develop a novel formulation that can reduce these side-effects and show maximum desired effects. Thus, SLN of MF can be prepared, which would help in increasing skin deposition as well as provide sustained release. In this study, SLNs were prepared by solvent - injection method.

Results:

The F8 batch had shown maximum entrapment up to55.59% and sustained drug release for more than 8 h. The skin permeability of SLN loaded gel was found to be 15.21times more than that of marketed cream. SLN loaded gel showed 83.52% of skin deposition which was 2.67 times more than marketed cream and 20 times more than plain drug loaded gel. The scanning electron microscopy and zeta potential study showed formation of good SLN dispersion. The stability study showed successful formation of stable SLNs. Thus, SLNs proved the potential for topical delivery of corticosteroid drug over the conventional formulations.

Experimental:

To overcome the shortcomings of conventional formulations, there is a need to develop a novel formulation that can reduce these side-effects and show maximum desired effects. Thus, SLN of MF can be prepared, which would help in increasing skin deposition as well as provide sustained release. In this study, SLNs were prepared by solvent - injection method.

Formulation, optimization, and in vitro evaluation of nanostructured lipid carriers for topical delivery of Apremilast

This work was aimed to formulate topical Apremilast (APM)-loaded nanostructured lipid carriers (NLCs) for the management of psoriasis. NLCs were prepared by a cold homogenization technique using Compritol 888ATO, oleic acid, Tween 80 and Span 20, and Transcutol P as a solid lipid, liquid lipid, surfactant mixture, and penetration enhancer, respectively. Carbopol 940 was used to convert NLC dispersion into NLC-based hydrogel to improve its viscosity for topical administration. The optimized formulation was characterized for size, polydispersity index (PDI), zeta potential (ZP), percentage of entrapment efficiency (%EE), and surface morphology. Furthermore, viscosity, spreadability, stability, in vitro drug diffusion, ex vivo skin permeation, and skin deposition studies were carried out. APM-loaded NLCs showed a narrow PDI (0.339) with a particle size of 758 nm, a %EE of 85.5%, and a ZP of -33.3 mV. Scanning electron microscopy confirmed spherical shape of NLCs. in vitro drug diffusion and ex vivo skin permeation results showed low drug diffusion, sustained drug release, and 60.1% skin deposition. The present study confirms the potential of the nanostructured lipid form of poorly water-soluble drugs for topical application and increased drug deposition in the skin.

Solubility enhancement studies on lurasidone hydrochloride using mixed hydrotropy

Low aqueous solubility is a major problem faced during formulation development of new drug molecules. Lurasidone HCl (LRD) is an antipsychotic agent specially used in the treatments of schizophrenia and is a good example of the problems associated with low aqueous solubility. Lurasidone is practically insoluble in water, has poor bioavailability and slow onset of action and therefore cannot be given in emergency clinical situations like schizophrenia. Hence, purpose of this research was to provide a fast dissolving oral dosage form of Lurasidone. This dosage form can provide quick onset of action by using the concept of mixed hydrotropy. Initially, solubility of LRD was determined individually in nicotinamide, sodium citrate, urea and sodium benzoate at concentration of 10, 20, 30 and 40% w/v solutions using purified water as a solvent. Highest solubility was obtained in 40% sodium benzoate solution. In order to decrease the individual hydrotrope concentration mixed hydrotropic agents were used. Highest solubility was obtained in 15:20:5 ratio of Nicotinamide + sodium benzoate + sodium citrate. This optimized combination was utilized in the preparation of solid dispersions by using distilled water as a solvent. Solid dispersions were evaluated for X-ray diffraction, differential scanning calorimetry and Fourier-transform infrared to show no drug-hydrotropes interaction has occurred. This solid dispersion was compressed to form fast dissolving tablets. Dissolution studies of prepared tablets were done using USP Type II apparatus. The batch L3 tablets show 88% cumulative drug release within 14 min and in vitro dispersion time was 32 min. It was concluded that the concept of mixed hydrotropic solid dispersion is novel, safe and cost-effective technique for enhancing the bioavailability of poorly water-soluble drugs. The miraculous enhancement in solubility and bioavailability of Lurasidone is clear indication of the potential of mixed hydrotropy to be used in future for other poorly water-soluble drugs in which low bioavailability is a major concern.

Formulation and Evaluation of Niosomal in situ Nasal Gel of a Serotonin Receptor Agonist, Buspirone Hydrochloride for the Brain Delivery via Intranasal Route

BACKGROUND

Buspirone Hydrochloride is an anxiolytic agent and serotonin receptor agonist belonging to azaspirodecanedione class of compounds used in the treatment of anxiety disorders. It has short half-life (2-3h) and low oral bioavailability (4%) due to extensive first pass metabolism.

OBJECTIVE

The nasal mucosa has several advantages viz., large surface area, porous endothelial membrane, high blood flow, avoidance of first-pass metabolism and ready accessibility that lead to faster and higher drug absorption. Keeping these facts in mind, the objective of the present study was to develop Buspirone hydrochloride loaded niosomal in-situ nasal gel.

METHODS

Buspirone hydrochloride niosomal in situ nasal gel was formulated, optimized and evaluated with the objective to deliver drug to the brain via intranasal route. Niosomes were prepared by thin film evaporation method and optimized using32 factorial design. Niosomes were characterized for particle size, zeta potential, entrapment efficiency and in vitro drug release. Buspirone hydrochloride loaded niosomes were further incorporated into Carbopol 934P and HPMC K4M liquid gelling system for the formation of in situ gel. The resultant solution was assessed for various parameters, viz., gelling time, gelling capacity, viscosity at pH 5 and pH 6.

RESULTS

The vesicle size of all niosomal suspension batches ranges between 168.3 -310.5 nm. The vesicle size of optimized niosomal suspension F5 batch is 181.9±0.36nm. For F5 batch, the value of zeta potential was found to be -15.4 mV; this specifies that prepared niosomes have sufficient surface charge to prevent aggregation of the vesicles. % entrapment efficiency for all batches was found in the range 72.44±0.18% to 87.7±0.66%. The cumulative percent release of niosomal suspension ranges from 66.34±0.39 to 84.26±0.26%. Ex vivo permeation of Buspirone hydrochloride through the sheep nasal mucosa showed that 83.49% w/w drug permeated after 8 h. The SEM and Zeta potential studies showed the formation of stable vesicles.

CONCLUSION

Thus, the application of niosomes proved the potential for intranasal delivery of Buspirone hydrochloride over the conventional gel formulations. Overall intranasal drug delivery for Buspirone hydrochloride has been successfully developed.

Development and evaluation of in situ gel of pregabalin

Aim and Background:

Pregabalin (PRG), an analog of gamma-aminobutyric acid, reduces the release of many neurotransmitters, including glutamate, and noradrenaline. It is used for the treatment of epilepsy; simple and complex partial convulsion. The present research work aims to ensure a high drug absorption by retarding the advancement of PRG formulation through the gastrointestinal tract. The work aims to design a controlled release PRG formulation which is administered as liquid and further gels in the stomach and floats in gastric juice.

Materials and Methods:

In situ gelling formulations were prepared using sodium alginate, calcium chloride, sodium citrate, hydroxypropyl methylcellulose (HPMC) K100M, and sodium bicarbonate. The prepared formulations were evaluated for solution viscosity, drug content, in vitro gelling studies, gel strength, and in vitro drug release. The final formulation was optimized using a 3² full factorial design.

Results:

The formulation containing 2.5% w/v sodium alginate and 0.2% w/v calcium chloride were considered optimum since it showed minimum floating lag time (18 s), optimum viscosity (287.3 cps), and gel strength (4087.17 dyne/cm²). The optimized formulation follows Korsmeyer-Peppas kinetic model with n value 0.3767 representing Fickian diffusion mechanism of drug release.

Conclusion:

Floating in situ gelling system of PRG can be formulated using sodium alginate as a gelling polymer and calcium chloride as a complexing agent to control the drug release for about 12 h for the treatment of epilepsy.

Middle East Respiratory Syndrome (MERS) Virus-Pathophysiological Axis and the Current Treatment Strategies

Middle East respiratory syndrome (MERS) is a lethal respiratory disease with its first case reported back in 2012 (Jeddah, Saudi Arabia). It is a novel, single-stranded, positive-sense RNA beta coronavirus (MERS-CoV) that was isolated from a patient who died from a severe respiratory illness. Later, it was found that this patient was infected with MERS. MERS is endemic to countries in the Middle East regions, such as Saudi Arabia, Jordan, Qatar, Oman, Kuwait and the United Arab Emirates. It has been reported that the MERS virus originated from bats and dromedary camels, the natural hosts of MERS-CoV. The transmission of the virus to humans has been thought to be either direct or indirect. Few camel-to-human transmissions were reported earlier. However, the mode of transmission of how the virus affects humans remains unanswered. Moreover, outbreaks in either family-based or hospital-based settings were observed with high mortality rates, especially in individuals who did not receive proper management or those with underlying comorbidities, such as diabetes and renal failure. Since then, there have been numerous reports hypothesising complications in fatal cases of MERS. Over the years, various diagnostic methods, treatment strategies and preventive measures have been strategised in containing the MERS infection. Evidence from multiple sources implicated that no treatment options and vaccines have been developed in specific, for the direct management of MERS-CoV infection. Nevertheless, there are supportive measures outlined in response to symptom-related management. Health authorities should stress more on infection and prevention control measures, to ensure that MERS remains as a low-level threat to public health.

Preparation, characterization and in vitro evaluation of tablets containing microwave-assisted solid dispersions of apremilast

BACKGROUND

Solid dispersions are among the techniques successfully employed to enhance the dissolution of poorly water-soluble drugs. Microwave (MW)-assisted evaporative crystallization has been used to prepare solid dispersions of drugs and polymers.

OBJECTIVES

The aim of the study was to investigate the solubility of apremilast (APM) in water by exploring the effect of MW-assisted solid dispersion technology.

MATERIAL AND METHODS

In the present study, solid dispersions of APM, a poorly water-soluble drug, were prepared. The solid dispersions were prepared using the conventional method (CM) and the MW-based solvent evaporation technique. Microwave energy was used to enhance the solubility and dissolution rate of APM. The physical mixture and solid dispersions were characterized using Fourier-transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM). Apremilast tablets containing MW-assisted solid dispersions were prepared by the direct compression technique and compared with the marketed formulation (Aprezo tablets).

RESULTS

The results obtained confirmed the conversion of crystalline APM to an amorphous form. The XRPD pattern of the MW-assisted formulation at a 2:1 ratio suggests the amorphous structure of APM within the formulation. Based on solubility studies results, Syloid® 244FP was selected as the best carrier. The dissolution study results suggested that the APM tablet prepared using MW-assisted solid dispersions at a 2:1 carrier/drug ratio improved the APM dissolution rate compared to the marketed formulation.

CONCLUSIONS

Based on the results, it can be concluded that the MW-assisted solid dispersion technique may be an effective approach to enhancing the dissolution profile of other poorly water-soluble drugs.

Formulation and In Vitro Evaluation of Casein Nanoparticles as Carrier for Celecoxib

Purpose: The objective of this work was to formulate casein (CAS) nanocarriers for the dissolution enhancement of poorly water soluble drug celecoxib (CLXB).

Methods: The CLXB loaded CAS nanocarriers viz., nanoparticles, reassembled CAS micelles and nanocapsules were prepared using sodium caseinate (SOD-CAS) as a carrier to enhance the solubility of CLXB. The prepared formulations were characterized for particle size, polydispersity index, zeta potential, percentage entrapment efficiency, and surface morphology for the selection of best formulation. Fourier transform infrared spectroscopy, differential scanning calorimetry and X-ray powder diffraction study was used to for the confirmation of encapsulation of CLXB. Further,in vitro drug dissolution, ex-vivo permeation studies on chicken ileum and stability studies were carried out.

Results: The CLXB loaded casein nanoparticles (CNP) (batch A2) showed a particle size diameter 216.1 nm, polydispersity index 0.422 with percentage entrapment efficiency of 90.71% and zeta potential of -24.6 mV. Scanning electron microscopy of suspension confirmed globular shape of CNP. Thein vitro release data of optimized batch followed non Fickian diffusion mechanism. The ex vivo permeation studies on chicken ileum of CLXB loaded CNP showed permeation through mucous membrane as compared to pure CLXB. The apparent permeability of best selected freeze dried CLXB loaded CNP (batch A2) was higher and gradually increased from 0.90 mg/cm² after 10 min to a maximum of 1.95 mg/cm² over the subsequent 90 min. A higher permeation was recorded at each time point than that of the pure CLXB.

Conclusion: The study explored the potential of CAS as a carrier for solubility enhancement of poorly water soluble drugs.

Skin Targeting of Oxiconazole Nitrate Loaded Nanostructured Lipid- Carrier Gel for Fungal Infections

BACKGROUND

The progression of fungal infections can be rapid and serious due to compromising with immune function. They may cause liver damage, affect estrogen levels or may cause allergic reactions. Oxiconazole nitrate (OXZN) is a broad spectrum commonly used antifungal drug. It acts by erogosterol biosynthesis inhibition, which causes lysis of the fungal cell membrane because of changes in both membrane integrity and fluidity and direct membrane damage of fungal cells. However, its poor water solubility and short half-life (3-5 h) limit its applications.

OBJECTIVE

This study aimed to develop and evaluate OXZN-loaded nanostructured lipid carrier (NLC) to improve its solubility and prolong its release for the treatment of fungal infection via topical administration.

METHOD

OXZN-NLC was prepared by ultrasonication method using 32 full factorial design. Glyceryl monostearate (GMS) (X1) and oleic acid (X2) were used as independent variables and particle size and percentage entrapment efficiency (% EE) as dependent variables. The OXZN-NLCs were characterized for particle size, particle morphology and entrapment efficiency.

RESULTS

The mean diameter of optimized OXZN-NLCs was found to be 124 ± 2 nm. Spherical shape and size were confirmed using scanning electron microscopy (SEM). Skin deposition study showed about 82.74% deposition as compared with the marketed formulation that showed 68.42% deposition. The developed NLCs show a sustained release pattern and high drug disposition in the infected area.

CONCLUSION

OXZN-NLC could be a potential alternative for the treatment of topical fungal infection after clinical evaluation in near future.

Formulation, Optimization, and Evaluation of Ketoconazole Loaded Nanostructured Lipid Carrier Gel for Topical Delivery

Objective:

Ketoconazole is used in the treatment of superficial and systemic fungal infections. It acts by blocking the synthesis of ergosterol, an essential component of the fungal cell membrane. The purpose of this work was to formulate ketoconazole loaded nanostructured lipid carriers formulation for skin targeting to minimize the adverse side effects and to prolong release.

Methods:

The ketoconazole loaded nanostructured lipid carriers were optimized using 32 factorial design to evaluate the effects of process and formulation variables. The nanostructured lipid carriers were prepared by melt-dispersion ultra-sonication method. The formulations were finally incorporated into polymeric gels of Carbopol 940 for convenient application. The gels were evaluated comparatively with commercially available formulations of ketoconazole with respect to ex vivo skin permeation and deposition study on human cadaver skin.

Results:

Nanostructured lipid carriers showed average particle size, zeta potential, and percentage entrapment in the range of 125.8 ± 1.8 to 295.0 ± 3.8 nm, -13.2 ± 1.1 to -30.9 ± 2.2 mV, and 69.47 ± 2.8 to 95.49 ± 4.5, respectively. Thermal studies revealed no drug-excipient incompatibility and amorphization of ketoconazole. Ex vivo study of the gel exhibited prolonged drug release up to 12 h. In vitro drug deposition study showed that the gel formulation can avoid the systemic uptake, better accumulative uptake of the drug, and nonirritant to the skin compared to marketed formulation. Optimized formulation exhibited better antifungal activity when compared to ketoconazole loaded gel and marketed cream (Keto ® cream). Histolopathology results indicated no toxic effect on the skin.

Conclusion:

These results indicate that developed nanostructured lipid-carriers gel formulation represents a promising carrier for topical delivery of ketoconazole, having controlled drug release, and potential of skin targeting.

Efavirenz Loaded Mixed Polymeric Micelles: Formulation, Optimization, and In Vitro Characterization

Efavirenz (EFZ) is a biopharmaceutics classification system (BCS) Class-II, first-line antiretroviral (ARV) drug. However, its utility through the oral route is restricted by its poor solubility. The objective of this study was to formulate EFZ-loaded binary-mixed micelles as a potential carrier for oral administration of EFZ. Rubingh's regular solution theory was used to determine the interaction behavior of the two components (Cremophor RH 40 and Phospholipon 80H) and of the mixed micelles and synergistic behavior was confirmed. The mixed miceller system was formulated using solvent evaporation method and a 3² factorial design was used for the optimization of selected independent variables. Miceller systems were further characterized in terms of morphology, particle size, zeta potential, percent entrapment efficiency, and drug loading. Fourier transform infrared and differential scanning calorimetry measurements confirmed the entrapment of EFZ in the micelles. The optimized formulation presented desirable qualities viz., nanometric size (17.27 ± 0.079), high entrapment efficiency, and good colloidal stability. The prepared optimized micelles can be potential carriers for EFZ in ARV therapies.

Cocrystals of Apixaban with Improved Solubility and Permeability: Formulation, Physicochemical Characterization, Pharmacokinetic Evaluation, and Computational Studies

The objective of the current study was to develop new cocrystals of Apixaban (APX) to improve its solubility and permeability. The molecular interaction between APX and caffeine (CFFN) was further studied by Raman spectroscopy. The results of all eight studied conformers revealed that the synthesized APX-CFFN cocrystals had the highest solubility and permeability. The water solubility and permeability of APX in the cocrystal were simultaneously enhanced as compared with pure APX in the physiological pH environment (pH 6.8 and pH 7.4). The X-ray diffraction analysis revealed that the cocrystal has a component molar ratio of 1:1. This was dominated by a three-dimensional hydrogen bonding supramolecular structure. The in vivo pharmacokinetic (PK) study indicated that the mean area under curve (AUC) of APX from the synthesized cocrystal was enhanced more than three-folds than the pure APX. Tablets of APX and APX-CFFN cocrystals were prepared using direct compression method and evaluated for in vitro dissolution profile in phosphate buffers (pH 6.8 and pH 7.4). Computational investigations with molecular dynamics simulations also supported the formation of stable cocrystals. The drug release of APX from the tablets was considerably increased when compared with the pure APX in both pH conditions and it was found to increase with an increase in media pH. The present investigation represents an alternative approach for optimizing physicochemical and PK properties of Biopharmaceutical Classification System class-III drugs without changing its molecular structure and intrinsic bioactivities.

Development and evaluation of transdermal organogels containing nicorandil

The objective of the study was to formulate a transdermal product containing Nicorandil as a model drug, because it has been first drug of choice to treat angina and hypertension. A further objective was to reduce its side effects. The transdermal product was prepared using various synthetic and natural gelling agents such as Carbopol 934p, Carbopol 974p, HPMC K15M and HPMC K100M. Various penetration enhancers were incorporated to enhance the diffusion across the rat skin. A further objective was to formulate organogels and minimize the concentration of penetration enhancer to 50% of the concentration used in gels and yet to achieve the maximum drug release. The prepared formulations were evaluated for their physical appearance, viscosity, spreadability, drug content and freeze thaw cycle. Based on in vitro studies across rat skin and human cadaver skin it was concluded that Nicrorandil transdermal organogel formulation using HPMC K100M with 2% w/w Transcutol-P shows increase in cumulative diffusion of Nicorandil amongst all other formulations.

Formulation and characterization of oral rapid disintegrating tablets of levocetirizine

BACKGROUND

Levocetirizine, active R (-) enantiomer of cetirizine, is an orally active and selective H1 receptor antagonist used medically as an anti-allergic. Allergic rhinitis is a symptomatic disorder of the nose induced by inflammation mediated by immunoglobulin E (IgE) in the membrane lining the nose after allergen exposure.

OBJECTIVES

The purpose of the present study was to prepare rapidly disintegrating tablets of levocetirizine after its complexation with β-cyclodextrin (β-CD).

MATERIAL AND METHODS

Levocetirizine-β-CD complex tablets were prepared by direct compression technique using 3 synthetic superdisintegrants in different proportions. Development of the formulation in the present study was mainly based on the concentration of superdisintegrants and the properties of the drug. Nine batches of tablets were formulated and evaluated for various parameters: drug content, weight variation, water absorption ratio, wetting time, in vitro disintegration, hardness, friability, thickness uniformity, and in vitro dissolution.

RESULTS

A Fourier-transform infrared spectroscopy (FTIR) study showed that there were no significant interactions between the drug and the excipients. The prepared tablets were good in appearance and showed acceptable results for hardness and friability. The in vitro disintegrating time of the formulated tablet batches was found to be 15-35 s percentage and the drug content of tablets in all formulations was found to be between 90-102%, which complied with the limits established in the United States Pharmacopeia.

CONCLUSIONS

Complexation of levocetirizine with β-CD significantly improves the solubility of the drug. The disintegration time of the tablets was decreased with an increase in superdisintegrant amount. The tablets (batch CPX5) had a minimum disintegration time of 20 s and 99.99% of the drug was released within 10 min.