Amorphous Iridium Oxide-Integrated Anode Electrodes with Ultrahigh Material Utilization for Hydrogen Production at Industrial Current Densities

Herein, ionomer-free amorphous iridium oxide (IrOx) thin electrodes are first developed as highly active anodes for proton exchange membrane electrolyzer cells (PEMECs) via low-cost, environmentally friendly, and easily scalable electrodeposition at room temperature. Combined with a Nafion 117 membrane, the IrOx-integrated electrode with an ultralow loading of 0.075 mg cm-2 delivers a high cell efficiency of about 90%, achieving more than 96% catalyst savings and 42-fold higher catalyst utilization compared to commercial catalyst-coated membrane (2 mg cm-2). Additionally, the IrOx electrode demonstrates superior performance, higher catalyst utilization and significantly simplified fabrication with easy scalability compared with the most previously reported anodes. Notably, the remarkable performance could be mainly due to the amorphous phase property, sufficient Ir3+ content, and rich surface hydroxide groups in catalysts. Overall, due to the high activity, high cell efficiency, an economical, greatly simplified and easily scalable fabrication process, and ultrahigh material utilization, the IrOx electrode shows great potential to be applied in industry and accelerates the commercialization of PEMECs and renewable energy evolution.

Electrochemically Grown Ultrathin Platinum Nanosheet Electrodes with Ultralow Loadings for Energy-Saving and Industrial-Level Hydrogen Evolution

Nanostructured catalyst-integrated electrodes with remarkably reduced catalyst loadings, high catalyst utilization and facile fabrication are urgently needed to enable cost-effective, green hydrogen production via proton exchange membrane electrolyzer cells (PEMECs). Herein, benefitting from a thin seeding layer, bottom-up grown ultrathin Pt nanosheets (Pt-NSs) were first deposited on thin Ti substrates for PEMECs via a fast, template- and surfactant-free electrochemical growth process at room temperature, showing highly uniform Pt surface coverage with ultralow loadings and vertically well-aligned nanosheet morphologies. Combined with an anode-only Nafion 117 catalyst-coated membrane (CCM), the Pt-NS electrode with an ultralow loading of 0.015 mgPt cm-2 demonstrates superior cell performance to the commercial CCM (3.0 mgPt cm-2), achieving 99.5% catalyst savings and more than 237-fold higher catalyst utilization. The remarkable performance with high catalyst utilization is mainly due to the vertically well-aligned ultrathin nanosheets with good surface coverage exposing abundant active sites for the electrochemical reaction. Overall, this study not only paves a new way for optimizing the catalyst uniformity and surface coverage with ultralow loadings but also provides new insights into nanostructured electrode design and facile fabrication for highly efficient and low-cost PEMECs and other energy storage/conversion devices.

Highly Porous Iridium Thin Electrodes with Low Loading and Improved Reaction Kinetics for Hydrogen Generation in PEM Electrolyzer Cells

Highly efficient electrodes with simplified fabrication and low cost are highly desired for the commercialization of proton exchange membrane electrolyzer cells (PEMECs). Herein, highly porous Ir-coated thin/tunable liquid/gas diffusion layers with honeycomb-structured catalyst layers were fabricated as anode electrodes for PEMECs via integrating a facile and fast electroplating process with efficient template removal. Combined with a Nafion 117 membrane, a low cell voltage of 1.842 V at 2000 mA/cm² and a high mass activity of 4.16 A/mg_Ir at 1.7 V were achieved with a low Ir loading of 0.27 mg/cm², outperforming most of the recently reported anode catalysts. Moreover, the thin electrode shows outstanding stability at a high current density of 1800 mA/cm² in the practical PEMEC. Moreover, with in-situ high-speed visualizations in PEMECs, the catalyst layer structure's impact on real-time electrochemical reactions and mass transport phenomena was investigated for the first time. Increased active sites and improved multiphase transport properties with favorable bubble detachment and water diffusion for the honeycomb-structured electrode are revealed. Overall, the significantly simplified ionomer-free honeycomb thin electrode with low catalyst loading and remarkable performance could efficiently accelerate the industrial application of PEMECs.

Tuning Catalyst Activation and Utilization Via Controlled Electrode Patterning for Low-Loading and High-Efficiency Water Electrolyzers

An anode electrode concept of thin catalyst-coated liquid/gas diffusion layers (CCLGDLs), by integrating Ir catalysts with Ti thin tunable LGDLs with facile electroplating in proton exchange membrane electrolyzer cells (PEMECs), is proposed. The CCLGDL design with only 0.08 mg_Ir cm^-2 can achieve comparative cell performances to the conventional commercial electrode design, saving ≈97% Ir catalyst and augmenting a catalyst utilization to ≈24 times. CCLGDLs with regulated patterns enable insight into how pattern morphology impacts reaction kinetics and catalyst utilization in PEMECs. A specially designed two-sided transparent reaction-visible cell assists the in situ visualization of the PEM/electrode reaction interface for the first time. Oxygen gas is observed accumulating at the reaction interface, limiting the active area and increasing the cell impedances. It is demonstrated that mass transport in PEMECs can be modified by tuning CCLGDL patterns, thus improving the catalyst activation and utilization. The CCLGDL concept promises a future electrode design strategy with a simplified fabrication process and enhanced catalyst utilization. Furthermore, the CCLGDL concept also shows great potential in being a powerful tool for in situ reaction interface research in PEMECs and other energy conversion devices with solid polymer electrolytes.

Exploring the Impacts of Conditioning on Proton Exchange Membrane Electrolyzers by In Situ Visualization and Electrochemistry Characterization

For a proton exchange membrane electrolyzer cell (PEMEC), conditioning is an essential process to enhance its performance, reproducibility, and economic efficiency. To get more insights into conditioning, a PEMEC with Ir-coated gas diffusion electrode (IrGDE) was investigated by electrochemistry and in situ visualization characterization techniques. The changes of polarization curves, electrochemical impedance spectra (EIS), and bubble dynamics before and after conditioning are analyzed. The polarization curves show that the cell efficiency increased by 9.15% at 0.4 A/cm², and the EIS and Tafel slope results indicate that both the ohmic and activation overpotential losses decrease after conditioning. The visualization of bubble formation unveils that the number of bubble sites increased greatly from 14 to 29 per pore after conditioning, at the same voltage of 1.6 V. Under the same current density of 0.2 A/cm²; the average bubble detachment size decreased obviously from 35 to 25 μm. The electrochemistry and visualization characterization results jointly unveiled the increase of reaction sites and the surface oxidation on the IrGDE during conditioning, which provides more insights into the conditioning and benefits for the future GDE design and optimization.

Modelling acute myeloid leukaemia in a continuum of differentiation states

Here we present a mathematical model of movement in an abstract space representing states of cellular differentiation. We motivate this work with recent examples that demonstrate a continuum of cellular differentiation using single cell RNA sequencing data to characterize cellular states in a high-dimensional space, which is then mapped into ℝ 2 or ℝ 2 with dimension reduction techniques. We represent trajectories in the differentiation space as a graph, and model directed and random movement on the graph with partial differential equations. We hypothesize that flow in this space can be used to model normal and abnormal differentiation processes. We present a mathematical model of hematopoeisis parameterized with publicly available single cell RNA-Seq data and use it to simulate the pathogenesis of acute myeloid leukemia (AML). The model predicts the emergence of cells in novel intermediate states of differentiation consistent with immunophenotypic characterizations of a mouse model of AML.

Evidence for allelic association on chromosome 3q25-27 in families with autism spectrum disorders originating from a subisolate of Finland

Recent molecular studies on autism and related disorders have supported a multilocus etiology for the disease spectrum. To maximize genetic and cultural homogeneity, we have focused our molecular studies to families originating from a subisolate of Central Finland. Genealogical studies enabled the identification of a megapedigree comprising of 12 core families with autism and Asperger syndrome (AS). We analyzed two chromosomal regions on Iq and 3q showing highest lod scores in our genome-wide scan, as well as the AUTS1 locus on chromosome 7q. For markers on 3q25-27, more significant association was observed in families from subisolate compared to families from the rest of Finland. In contrast, no clear evidence for association on AUTS1 locus was obtained. The wide interval showing association, in particular, on chromosome 3q suggests a locus for autism spectrum of disorders on this chromosomal region.

Enforcing the Fair Housing Amendments Act to benefit people with mental disability

Housing is integral to successful community care for many people with mental disabilities. To try to eliminate discrimination in access to housing for people with physical or mental disability and to support their right to live in the community of their choice, Congress enacted the Fair Housing Amendments Act of 1988. The author examines representative court cases that have applied the act to restrictions related to people with mental disabilities; they include cases testing restrictions applicable only to mentally disabled people, restrictive covenants, failure to make "reasonable accommodation," state and municipal laws that predate the 1988 act, and exclusion because of dangerousness to others. To date, the courts have been receptive to the use of the act in challenging laws and practices that create barriers for people with mental disability.

chickadee encodes a profilin required for intercellular cytoplasm transport during Drosophila oogenesis

The entire cytoplasmic contents of 15 highly polyploid nurse cells are transported rapidly to the oocyte near the end of Drosophila oogenesis. chickadee is one of a small group of genes whose mutant phenotype includes a disruption of this nurse cell cytoplasm transport. We have cloned the chickadee gene and found that cDNA clones encode a protein 40% identical to yeast and Acanthamoeba profilin. The nurse cells from chickadee egg chambers that lack ovary-specific profilin fail to synthesize cytoplasmic actin networks correctly. In addition, the nurse cell nuclei in chickadee egg chambers become displaced and often partially stretched through the channels leading into the oocyte, blocking the flow of cytoplasm. We suggest that the newly synthesized cytoplasmic actin networks are responsible for maintaining nuclear position in the nurse cells.

Levinson's model as a predictor of the adult development of policemen

In the early 1970s Levinson and his associates completed a landmark study of adult development. Based on the Interviewing and testing of forty men, Levinson proposed a comprehensive model of adult growth. Although his sample contained men of diverse occupational groups, it did not include policemen or other workers who faced physical danger in their job. We interviewed twenty-three male policemen and found that, in general, the policeman's lives corresponded to Levinson's theory. Participants experienced a series of psychosocial stages, including some stressful transitional periods, but the nature of these stages was similar to Levinson's model for some age periods (e.g., Age 30 Transition), and not for others (e.g., Midlife Transition).