Radiosynthesis of Stable 198Au-Nanoparticles by Neutron Activation of αvβ3-Specific AuNPs for Therapy of Tumor Angiogenesis

This paper reports on the development of stable tumor-specific gold nanoparticles (AuNPs) activated by neutron irradiation as a therapeutic option for the treatment of cancer with high tumor angiogenesis. The AuNPs were designed with different mono- or dithiol-ligands and decorated with different amounts of Arg-Gly-Asp (RGD) peptides as a tumor-targeting vector for αvβ3 integrin, which is overexpressed in tissues with high tumor angiogenesis. The AuNPs were evaluated for avidity in vitro and showed favorable properties with respect to tumor cell accumulation. Furthermore, the therapeutic properties of the [198Au]AuNPs were evaluated in vitro on U87MG cells in terms of cell survival, suggesting that these [198Au]AuNPs are a useful basis for future therapeutic concepts.

On the adsorption and reactivity of element 114, flerovium

Flerovium (Fl, element 114) is the heaviest element chemically studied so far. To date, its interaction with gold was investigated in two gas-solid chromatography experiments, which reported two different types of interaction, however, each based on the level of a few registered atoms only. Whereas noble-gas-like properties were suggested from the first experiment, the second one pointed at a volatile-metal-like character. Here, we present further experimental data on adsorption studies of Fl on silicon oxide and gold surfaces, accounting for the inhomogeneous nature of the surface, as it was used in the experiment and analyzed as part of the reported studies. We confirm that Fl is highly volatile and the least reactive member of group 14. Our experimental observations suggest that Fl exhibits lower reactivity towards Au than the volatile metal Hg, but higher reactivity than the noble gas Rn.

Reactor activations to constrain astrophysically relevant cross sections

The determination of astrophysically relevant neutron-induced cross sections is particularly difficult when the involved isotopes are radioactive or the cross sections are very small. Activation experiments at reactors offer the possibility to overcome these limitations with high neutron fluxes. The flux determination is typically based on the activation of two monitors with known cross sections to separate the different flux components. The usually applied cadmium difference method allows a distinction between the thermal and the epithermal part. By a combination of two linear functions representing both monitors the neutron flux components can be determined. However, if more than two monitors are used, the linear system of equations is overdetermined, which allows the identification of a probability distribution. In this proceeding, the feasibility and relevance of this method is demonstrated.

Gas phase synthesis of 4d transition metal carbonyl complexes with thermalized fission fragments in single-atom reactions

The formation of carbonyl complexes using atom-at-a-time quantities of short-lived transition metals from fusion and fission reactions was reported in 2012. Numerous studies focussing on this chemical system, which is also applicable for the superheavy elements followed. We report on a novel two-chamber approach for the synthesis of such complexes that allows spatial decoupling of thermalization and gas-phase carbonyl complex synthesis. Neutron induced fission on 235U and spontaneous fission of 248Cm were employed for the production of the fission products. These were stopped inside a gas volume behind the target and flushed with an inert-gas flow into a second chamber. This was flushed with carbon monoxide to allow the gas-phase synthesis of carbonyl complexes. Parameter studies of the transfer from the first into the second chamber as well as on the carbonyl complex formation and transport processes have been performed. High overall efficiencies of more than 50% were reached rendering this approach interesting for studies of superheavy elements. Our results show that carbonyl complex formation of thermalized fission products is a single-atom reaction, and not a hot-atom reaction.

High-resolution laser resonance ionization spectroscopy of 143 - 147 Pm

We present the results of high-resolution laser spectroscopy of the long-lived radioactive isotopes 143 - 147 Pm. The hyperfine structures and isotope shifts in two different atomic ground-state transitions at 452 nm and 468 nm were probed by in-source laser spectroscopy at the RISIKO mass separator in Mainz, using the PI-LIST ion source. From the hyperfine coupling constants the nuclear magnetic dipole and electric quadrupole moments for 143 - 147 Pm were derived, and the measured isotope shifts allowed the extraction of changes in nuclear mean square charge radii.

Sodium chloride is an ionic checkpoint for human TH2 cells and shapes the atopic skin microenvironment

The incidence of allergic diseases has increased over the past 50 years, likely due to environmental factors. However, the nature of these factors and the mode of action by which they induce the type 2 immune deviation characteristic of atopic diseases remain unclear. It has previously been reported that dietary sodium chloride promotes the polarization of T helper 17 (T_H17) cells with implications for autoimmune diseases such as multiple sclerosis. Here, we demonstrate that sodium chloride also potently promotes T_H2 cell responses on multiple regulatory levels. Sodium chloride enhanced interleukin-4 (IL-4) and IL-13 production while suppressing interferon-γ (IFN-γ) production in memory T cells. It diverted alternative T cell fates into the T_H2 cell phenotype and also induced de novo T_H2 cell polarization from naïve T cell precursors. Mechanistically, sodium chloride exerted its effects via the osmosensitive transcription factor NFAT5 and the kinase SGK-1, which regulated T_H2 signature cytokines and master transcription factors in hyperosmolar salt conditions. The skin of patients suffering from atopic dermatitis contained elevated sodium compared to nonlesional atopic and healthy skin. These results suggest that sodium chloride represents a so far overlooked cutaneous microenvironmental checkpoint in atopic dermatitis that can induce T_H2 cell responses, the orchestrators of atopic diseases.

Measurement of the 242Pu(n, γ) cross section from thermal to 500 keV at the Budapest research reactor and CERN n_TOF-EAR1 facilities

The design and operation of innovative nuclear systems requires a better knowledge of the capture and fission cross sections of the Pu isotopes. For the case of capture on 242Pu, a reduction of the uncertainty in the fast region down to 8-12% is required. Moreover, aiming at improving the evaluation of the fast energy range in terms of average parameters, the OECD NEA High Priority Request List (HPRL) requests high-resolution capture measurements with improved accuracy below 2 keV. The current uncertainties also affect the thermal point, where previous experiments deviate from each other by 20%. A fruitful collaboration betwen JGU Mainz and HZ Dresden-Rossendorf within the EC CHANDA project resulted in a 242Pu sample consisting of a stack of seven fission-like targets making a total of 95(4) mg of 242Pu electrodeposited on thin (11.5 μm) aluminum backings. This contribution presents the results of a set of measurements of the 242Pu(n, γ) cross section from thermal to 500 keV combining different neutron beams and techniques. The thermal point was determined at the Budapest Research Reactor by means of Neutron Activation Analysis and Prompt Gamma Analysis, and the resolved (1 eV - 4 keV) and unresolved (1 - 500 keV) resonance regions were measured using a set of four Total Energy detectors at the CERN n_TOF-EAR1.

The research reactor TRIGA Mainz – a strong and versatile neutron source for science and education

The TRIGA Mark II-reactor at the Johannes Gutenberg University Mainz (JGU) is one of three research reactors in Germany. The TRIGA Mainz became first critical on August 3rd, 1965. It can be operated in the steady state mode with a maximum power of 100 kWth and in the pulse mode with a peak power of 250 MWth and a pulse length of 30 ms. The TRIGA Mainz is equipped with a central thimble, a rotary specimen rack, three pneumatic transfer systems, four beam tubes, and a graphite thermal column. The TRIGA Mainz is intensively used both for basic and applied research in nuclear chemistry and nuclear physics. Two sources for ultra-cold neutrons (UCN) are operational at two beam ports. At a third beam port a Penning-Trap for highly precise mass measurements of exotic nuclides is installed. Education and training is another main field of activity. Here, various courses in nuclear and radiochemistry, reactor operation and reactor physics are held for scientists, advanced students, engineers, and technicians utilizing the TRIGA Mainz reactor.

Copper-catalyzed click reactions: quantification of retained copper using 64Cu-spiked Cu(I), exemplified for CuAAC reactions on liposomes

The Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) is a powerful, highly reliable and selective reaction which allows for a rapid synthesis in high yields and under mild conditions (pH, temperature). However, the cytotoxicity of copper requires its complete removal prior to an application in vivo. This is an issue especially when it comes to CuAAC reactions on macromolecular structures or drug delivery systems, as copper might be retained by these systems. Thus, a quantification of the final copper content of these systems is inevitable, which we exemplified for a CuAAC reaction on liposomes using 64Cu-spiked Cu(I). In this respect, a Cu(II) nitrate solution was irradiated at the TRIGA Mark II research reactor Mainz to obtain c.a. [64Cu]Cu(II). The irradiated solution was directly used for a CuAAC on liposomes. After purification, their copper content was calculated utilizing γ-ray spectrometry. Only 0.018% of the added 64Cu-activity was still present in the liposome containing fractions after purification. This refers to a total amount of copper of 0.17 ng. The amount of retained copper is so low, that an in vivo application of the liposomes is absolutely reasonable. Besides this particular study, the experimental methodology may be applied to study many other CuAAC reactions, used for the synthesis of radiolabeled or non-radioactive species, which are intended for human applications.

Online chemical adsorption studies of Hg, Tl, and Pb on SiO2 and Au surfaces in preparation for chemical investigations on Cn, Nh, and Fl at TASCA

Online gas-solid adsorption studies with single-atom quantities of Hg, Tl, and Pb, the lighter homologs of the superheavy elements (SHE) copernicium (Cn, Z=112), nihonium (Nh, Z=113), and flerovium (Fl, Z=114), were carried out using short-lived radioisotopes. The interaction with Au and SiO2 surfaces was studied and the overall chemical yield was determined. Suitable radioisotopes were produced in fusion-evaporation reactions, isolated in the gas-filled recoil separator TASCA, and flushed rapidly to an adjacent setup of two gas chromatography detector arrays covered with SiO2 (first array) and Au (second array). While Tl and Pb adsorbed on the SiO2 surface, Hg interacts only weakly and reached the Au-covered array. Our results contribute to elucidating the influence of relativistic effects on chemical properties of the heaviest elements by providing experimental data on these lighter homologs.

Production, isolation and characterization of radiochemically pure 163Ho samples for the ECHo-project

Several experiments on the study of the electron neutrino mass are based on high-statistics measurements of the energy spectrum following electron capture of the radionuclide 163Ho. They rely on the availability of large, radiochemically pure samples of 163Ho. Here, we describe the production, separation, characterization, and sample production within the Electron Capture in Holmium-163 (ECHo) project. 163Ho has been produced by thermal neutron activation of enriched, prepurified 162Er targets in the high flux reactor of the Institut Laue-Langevin, Grenoble, France, in irradiations lasting up to 54 days. Irradiated targets were chemically processed by means of extraction chromatography, which allowed separating the formed Ho from the 162Er target-material and from the main byproducts 170Tm and 171Tm, which are co-produced in GBq amounts. Decontamination factors of >500 for Er and of >105 for Tm and yields of 3.6·1016 and 1.2·1018 atoms of 163Ho were obtained, corresponding to a recovery yield of 95 % of Ho in the chemical separation. The Ho-fraction was characterized by means of γ-ray spectrometry, Inductively-Coupled-Plasma Mass Spectrometry (ICP-MS), Resonance Ionization Mass Spectrometry (RIMS) and Neutron Activation Analysis (NAA). In this process, the thermal neutron capture cross section of 163Ho was measured to σHo-163 to Ho-164m= (23±3) b and σHo-163 to Ho-164g= (156±9) b for the formation of the two isomers of 164Ho. Specific samples were produced for further purification by mass separation to isolate 163Ho from the Ho-isotope mixture, as needed for obtaining the energy spectrum within ECHo. The partial efficiency for this second separation step is (32±5) %.

Studies on Flat Sandwich-type Self-Powered Detectors for Flux Measurements in ITER Test Blanket Modules

Neutron and gamma flux measurements in designated positions in the test blanket modules (TBM) of ITER will be important tasks during ITER’s campaigns. As part of the ongoing task on development of nuclear instrumentation for application in European ITER TBMs, experimental investigations on self-powered detectors (SPD) are undertaken. This paper reports the findings of neutron and photon irradiation tests performed with a test SPD in flat sandwich-like geometry. Whereas both neutrons and gammas can be detected with appropriate optimization of geometries, materials and sizes of the components, the present sandwich-like design is more sensitive to gammas than 14 MeV neutrons. Range of SPD current signals achievable under TBM conditions are predicted based on the SPD sensitivities measured in this work.

Quantitative molecular plating of large-area 242Pu targets with improved layer properties

For measurements of the neutron-induced fission cross section of ²⁴²Pu, large-area (42cm²) ²⁴²Pu targets were prepared on Ti-coated Si wafers by means of constant current density molecular plating. Radiochemical separations were performed prior to the platings. Quantitative deposition yields (>95%) were determined for all targets by means of alpha-particle spectroscopy. Layer densities in the range of 100-150μg/cm² were obtained. The homogeneity of the targets was studied by radiographic imaging. A comparative study between the quality of the layers produced on the Ti-coated Si wafers and the quality of layers grown on normal Ti foils was carried out by applying scanning electron microscopy and energy dispersive X-ray spectroscopy. Ti-coated Si wafers resulted clearly superior to Ti foils in the production of homogeneous ²⁴²Pu layers with minimum defectivity.

Digital liquid-scintillation counting and effective pulse-shape discrimination with artificial neural networks

A typical problem in low-level liquid scintillation (LS) counting is the identification of α particles in the presence of a high background of β and γ particles. Especially the occurrence of β-β and β-γ pile-ups may prevent the unambiguous identification of an α signal by commonly used analog electronics. In this case, pulse-shape discrimination (PSD) and pile-up rejection (PUR) units show an insufficient performance. This problem was also observed in own earlier experiments on the chemical behaviour of transactinide elements using the liquid-liquid extraction system SISAK in combination with LS counting. α-particle signals from the decay of the transactinides could not be unambiguously assigned. However, the availability of instruments for the digital recording of LS pulses changes the situation and provides possibilities for new approaches in the treatment of LS pulse shapes. In a SISAK experiment performed at PSI, Villigen, a fast transient recorder, a PC card with oscilloscope characteristics and a sampling rate of 1 giga samples s−1 (1 ns per point), was used for the first time to record LS signals. It turned out, that the recorded signals were predominantly α, β-β and β-γ pile up, and fission events. This paper describes the subsequent development and use of artificial neural networks (ANN) based on the method of “back-propagation of errors” to automatically distinguish between different pulse shapes. Such networks can “learn” pulse shapes and classify hitherto unknown pulses correctly after a learning period. The results show that ANN in combination with fast digital recording of pulse shapes can be a powerful tool in LS spectrometry even at high background count rates.

48Ca+249Bk fusion reaction leading to element Z = 117: long-lived α-decaying 270Db and discovery of 266Lr

The superheavy element with atomic number Z=117 was produced as an evaporation residue in the (48)Ca+(249)Bk fusion reaction at the gas-filled recoil separator TASCA at GSI Darmstadt, Germany. The radioactive decay of evaporation residues and their α-decay products was studied using a detection setup that allowed measuring decays of single atomic nuclei with half-lives between sub-μs and a few days. Two decay chains comprising seven α decays and a spontaneous fission each were identified and are assigned to the isotope (294)117 and its decay products. A hitherto unknown α-decay branch in (270)Db (Z = 105) was observed, which populated the new isotope (266)Lr (Z = 103). The identification of the long-lived (T(1/2) = 1.0(-0.4)(+1.9) h) α-emitter (270)Db marks an important step towards the observation of even more long-lived nuclei of superheavy elements located on an "island of stability."

Superheavy element flerovium (element 114) is a volatile metal

The electron shell structure of superheavy elements, i.e., elements with atomic number Z ≥ 104, is influenced by strong relativistic effects caused by the high Z. Early atomic calculations on element 112 (copernicium, Cn) and element 114 (flerovium, Fl) having closed and quasi-closed electron shell configurations of 6d(10)7s(2) and 6d(10)7s(2)7p1/2(2), respectively, predicted them to be noble-gas-like due to very strong relativistic effects on the 7s and 7p1/2 valence orbitals. Recent fully relativistic calculations studying Cn and Fl in different environments suggest them to be less reactive compared to their lighter homologues in the groups, but still exhibiting a metallic character. Experimental gas-solid chromatography studies on Cn have, indeed, revealed a metal-metal bond formation with Au. In contrast to this, for Fl, the formation of a weak bond upon physisorption on a Au surface was inferred from first experiments. Here, we report on a gas-solid chromatography study of the adsorption of Fl on a Au surface. Fl was produced in the nuclear fusion reaction (244)Pu((48)Ca, 3-4n)(288,289)Fl and was isolated in-flight from the primary (48)Ca beam in a physical recoil separator. The adsorption behavior of Fl, its nuclear α-decay product Cn, their lighter homologues in groups 14 and 12, i.e., Pb and Hg, and the noble gas Rn were studied simultaneously by isothermal gas chromatography and thermochromatography. Two Fl atoms were detected. They adsorbed on a Au surface at room temperature in the first, isothermal part, but not as readily as Pb and Hg. The observed adsorption behavior of Fl points to a higher inertness compared to its nearest homologue in the group, Pb. However, the measured lower limit for the adsorption enthalpy of Fl on a Au surface points to the formation of a metal-metal bond of Fl with Au. Fl is the least reactive element in the group, but still a metal.

Spectroscopy of element 115 decay chains

A high-resolution α, x-ray, and γ-ray coincidence spectroscopy experiment was conducted at the GSI Helmholtzzentrum für Schwerionenforschung. Thirty correlated α-decay chains were detected following the fusion-evaporation reaction 48Ca + 243Am. The observations are consistent with previous assignments of similar decay chains to originate from element Z=115. For the first time, precise spectroscopy allows the derivation of excitation schemes of isotopes along the decay chains starting with elements Z>112. Comprehensive Monte Carlo simulations accompany the data analysis. Nuclear structure models provide a first level interpretation.

[Improved magnetic resonance myelography using image fusion]

PURPOSE

To demonstrate that the disadvantage of missing anatomical information in heavily T2-weighted MR myelography images can be eliminated by image fusion and phase encoding in the coronal direction of the source images, resulting in MR myelography images comparable to the gold standard, i. e., post-myelography CT.

MATERIALS AND METHODS

This study included 110 patients suffering from extradural pathologies of the cervical and lumbar spine. All patients were investigated using 3D MR myelography and post-myelography CT. The MRI data were post-processed using image fusion and reconstruction algorithms and were compared to the corresponding images of post-myelography CT.

RESULTS

Our approach for visualization (3D MR myelography) was able to depict intradural structures in high spatial resolution and without artifacts. The results of our visualization approach were comparable to the gold standard - post-myelography CT. Anatomical correlation was reached by image fusion of different MR data sets. The required post-processing steps were performed quickly and were available on a commercial workstation.

CONCLUSION

Image fusion of different MR data sets allows for visualization of 3D data sets with enhanced quality. The results for the visualization of MR myelography in particular are comparable to conventional myelography and post-myelography CT. The missing anatomical information in heavily T2-weighted MR myelography images can be compensated by image fusion with conventional MRI.

[Possible aggravation of a Henoch Schoenlein purpura by isotretinoin]

We report on a 16 year old patient with a hemorrhagic bullous form of a Henoch-Schönlein purpura. The cause for the event could not be determined, but the patient recovered without complications. Since he had begun a therapy with isotretinoin due to an acne inversa 3 weeks before, a possible association between the event and the treatment could not be excluded, and the case was reported to Swissmedic. In the comment, we discuss the pharmacology of isotretinoin, drug-induced vasculitis, and its pathomechanisms. As a general reminder, the criteria for the causality assessment of adverse drug reactions as well as the reporting system of adverse drug reactions in Switzerland are discussed.

[Health economics evaluation of magnetic resonance imaging for the staging of prostate cancer for Austria and Germany]

PURPOSE

The aim of this study was the health economics analysis of MR imaging in the preoperative staging of patients with prostate carcinoma (PCa).

MATERIALS AND METHODS

The health economics analysis consisted of the following steps: modeling, determination of probabilities and parameters based on a detailed literature search, evaluation using the averages of the parameters, and sensitivity analyses of the results over the ranges of values. We performed a cost-utility analysis from health insurance's perspective for Austria and Germany. The population under investigation included patients with confirmed PCa. The alternative was a decision for therapy with or without staging using MR imaging. A localized PCa was treated by prostatectomy and locally advanced PCa by radiation/hormone therapy. The result parameters were quality adjusted life years (QALYs) and costs per patient.

RESULTS

The evaluation showed that MR imaging is useful regarding costs and utilities prior to radical prostatectomy which is expensive and may be associated with serious clinical consequences. The costs per patient were lower by € 2635 and the utilities were higher by 0.099 QALYs. The strategy without MR imaging for staging was dominated by the strategy using MR imaging for staging in the evaluation using the base values and in almost all sensitivity analyses.

CONCLUSION

For the parameters used and almost all scenarios of the sensitivity analysis, our decision-analytic model revealed a higher cost-utility ratio for the strategy using MR imaging for the staging of PCa.

[Health-economic evaluation of magnetic resonance imaging before biopsy for diagnosis of prostate cancer]

PURPOSE

The aim of this study was the health-economic analysis of MR imaging in the diagnostics of suspicious prostate carcinoma (PCa) before execution of a first biopsy.

MATERIALS AND METHODS

The health-economic analysis included four steps: modeling, determination of probabilities, evaluation, and sensitivity analyses. We performed an effectiveness analysis from the patient perspective as well as a cost-effectiveness and a cost-utility analysis from the health insurance perspective for Austria and Germany. The effectiveness and cost-effectiveness analysis used a hypothetical cohort of 100,000 patients. The result parameters were number of biopsies, number of detected PCa, and monetary costs. For the cost-efficiency analysis, the result parameters, quality-adjusted life years (QALYs) and costs, were calculated for an individual patient.

RESULTS

The efficiency analysis showed that MRI before a first biopsy can prevent ca. 64,000 unnecessary biopsies/ 100,000 patients. The diagnostic efficiency was higher by a factor of 1.7. Due to MRI, eight PCas were additionally detected. From a health insurance perspective, MRI was not cost-effective. Extra costs of ca. 42 m. € per 100,000 patients and of 650 € per prevented biopsy were calculated. The costs per detected PCa were increased by 1395 €. The attainable QALYs were a little higher for the MRI alternative, which was therefore not dominated.

CONCLUSION

Our results do not permit a clear recommendation for or against the application of MRI in the diagnostics of PCa. From the patient perspective, it is to be endorsed due to the higher medical efficiency. However, it is connected with higher health insurance costs.

Production and decay of element 114: high cross sections and the new nucleus 277Hs

The fusion-evaporation reaction 244Pu(48Ca,3-4n){288,289}114 was studied at the new gas-filled recoil separator TASCA. Thirteen correlated decay chains were observed and assigned to the production and decay of {288,289}114. At a compound nucleus excitation energy of E{*}=39.8-43.9  MeV, the 4n evaporation channel cross section was 9.8{-3.1}{+3.9}  pb. At E^{*}=36.1-39.5  MeV, that of the 3n evaporation channel was 8.0{-4.5}{+7.4}  pb. In one of the 3n evaporation channel decay chains, a previously unobserved α branch in 281Ds was observed (probability to be of random origin from background: 0.1%). This α decay populated the new nucleus 277Hs, which decayed by spontaneous fission after a lifetime of 4.5 ms.

On-line anion exchange of rutherfordium in HF/HNO3 and HF solutions

The fluoride complexation of the group-4 elements Zr, Hf, and Rf, and of the pseudo-homolog Th, was previously investigated in mixed HNO3/HF solutions by studying K d values on both cation-exchange resins (CIX) and anion-exchange resins (AIX) using the automated rapid chemistry apparatus ARCA. On the CIX, the fluoride complexation of Rf was found to be weaker than that of Zr and Hf but stronger than that of Th. On the AIX, the competition for the binding sites by the counter ion NO3 - was found to be stronger for the fluoride complexes of Rf than for those of Zr and Hf. The aim of the present work is to add independent evidence to the latter result by measuring K d values for Rf on the AIX in 0.1 M HNO3/0.5 M HF and in 0.01 M HF without any HNO3. The results are obtained via an activity ratio of the long-lived α-decay descendant of 261mRf, 20-d 253Es, using the multi-column technique (MCT). These experiments corroborate the seemingly much more pronounced competition of NO3 - for the exchanging sites of the AIX with respect to [RfF x ]( x -4)- than with [ZrF x ]( x -4)- and [HfF x ]( x -4)-.

Attempts to chemically investigate element 112

Two experiments aiming at the chemical investigation of element 112 produced in the heavy ion induced nuclear fusion reaction of 48Ca with 238U were performed at the Gesellschaft für Schwerionenforschung (GSI), Darmstadt, Germany. Both experiments were designed to determine the adsorption enthalpy of element 112 on a gold surface using a thermochromatography setup. The temperature range covered in the thermochromatography experiments allowed the adsorption of Hg at about 35 °C and of Rn at about -180 °C. Reports from the Flerov Laboratory for Nuclear Reactions (FLNR), Dubna, Russia claim production of a 5-min spontaneous fission (SF) activity assigned to 283112 for the 238U(48Ca,3n) 283112 reaction. Hence, Experiment I was designed to detect spontaneously fissioning (SF) isotopes of element 112 with half-lives (t 1/2) longer than about 20 s. 11 high-energy events were detected. 7 events exhibit a deposition pattern resembling a chromatographic peak in the vicinity of Rn deposition. However, the energy of the events observed in Experiment I was lower than expected for a SF-decay of 283112. Therefore, these events could not be unambiguously attributed to the decay of 283112. In contradiction with earlier publications newer reports from FLNR Dubna claim that 283112 decays by α-particle emission (E α = 9.5 MeV) with t 1/2 = 4 s followed by a SF-decay of 279Ds (t 1/2 = 0.2 s). Therefore, Experiment II was designed to be sensitive to both claimed decay properties of 283112. However, during this experiment neither short α-SF correlations nor SF coincidences were detected. The conclusion is that 283112 was not unambiguously detected, neither in Experiment I nor in Experiment II.

Determination of stability constants of lanthanide nitrate complex formation using a solvent extraction technique

For lanthanides and actinides, nitrate complex formation is an important factor with respect to the reprocessing of nuclear fuels and in studies that treat partitioning and transmutation/conditioning. Different techniques, including microcalorimetry, various kinds of spectroscopy, ion-exchange and solvent extraction, can be used to determine stability constants of nitrate complex formation. However, it is uncommon that all lanthanides are studied at the same time, using the same experimental conditions and technique. The strengths of the complexes are different for lanthanides and actinides, a feature that may assist in the separation of the two groups. This paper deals with nitrate complex formation of lanthanides using a solvent extraction technique. Trace amounts of radioactive isotopes of lanthanides were produced at the TRIGA Mainz research reactor and at the Institutt for Energiteknikk in Kjeller, Norway (JEEP II reactor).

The extraction of lanthanide ions into an organic phase consisting of 2,6-bis-(benzoxazolyl)-4-dodecyloxylpyridine, 2-bromodecanoic acid and tert-butyl benzene as a function of nitrate ion concentration in the aqueous phase was studied in order to estimate the stability constants of nitrate complex formation. When the nitrate ion concentration is increased in the aqueous phase, the nitrate complex formation starts to compete with the extraction of metal ions. Thus the stability constants of nitrate complex formation can be estimated by measuring the decrease in extraction and successive fitting of an appropriate model.

Extraction curves for La, Ce, Pr, Nd, Pm, Sm, Eu, Gd, Dy, Ho and Er were obtained and stability constants for their nitrate complex formation were estimated. Tb, Tm, Yb and Lu were also investigated, but no stability constants could be determined. The distribution ratios for the metal ions at low nitrate ion concentration were obtained at the same time, showing the effect of lanthanide contraction resulting in decreasing extraction along the series. A clear tetrad effect in the lanthanide group was also found.

Magnetic resonance imaging of the knee: a tool for prediction of joint damage in early rheumatoid arthritis?

OBJECTIVE

To evaluate the usefulness of magnetic resonance imaging (MRI) in predicting destructive rheumatoid arthritis (RA) in the knee joint, and to compare this method with clinical examination and conventional radiography (CR).

METHODS

Clinical evaluations of the knee joint, followed by MRI and CR examinations were performed in 30 patients with early RA. The MRI examination included evaluation of inflammation using a synovitis score and evaluation of destruction with an erosion score. The first examinations were performed within 14 months from disease onset. Twenty-eight patients were re-examined after 1 year, and 23 patients after 3 years. 'Disease activity score' (DAS), using a 28 joints score (DAS28); health assessment questionnaire (HAQ); rheumatoid factor (RF); and C-reactive protein (CRP) were also analysed.

RESULTS

At baseline, MRI found synovitis in 29 patients, of whom 18 also had clinical synovitis. At baseline five patients had 17 MRI erosions, whereas on CR two patients had one erosion each. After 1 year 17 of 35 and after 3 years 28 of 55 MRI erosions were detected also on CR. In only one case CR showed an erosion that was not visible on MRI. The MRI synovitis score (reflecting the extent of the synovitis) at baseline correlated significantly with the number of erosions on MRI both at year 1 and 3, and with the number of erosions on CR at 3 years. In logistic multiple regression analyses the MRI-synovitis score proved to be the best independent predictor of erosiveness.

CONCLUSION

MRI was superior to clinical examination and CR in detecting erosions. MRI synovitis score was the best independent predictor of erosiveness in the knee joint in patients with early RA.