Preconcentration technique for the determination of trace elements in natural water samples by ICP-AES

A procedure was developed for the determination of Cd, Cu, Zn, Co, Ni, Mn, Pb and Mo in water samples by inductively coupled plasma atomic emission spectrometry (ICP-AES) after preconcentration on a morpholine dithiocarbamate (mor-DTC) supported by bagasse (Saccharam aphisinaram). The sorbed elements were subsequently eluted with 4,M HNO3 and the acid eluates were analysed by ICP-AES. The influence of various parameters such as pH, flow rate of sample, eluent concentration, volume of the sample and volume of eluent were investigated to enhance the sensitivity of the present method. A 20,mL disposable syringe served as preconcentration column. Under the optimal conditions Cd, Cu, Zn, Co, Ni, Mn, Pb and Mo in aqueous sample was concentrated about 100-fold. The sorption recoveries of elements were higher than 99.6%. The method is also applied for the analysis of natural and spiked water samples.

Studies of selenium in environmental samples and synthetic mixtures by spectrophotometry

A rapid, highly sensitive and selective spectrophotometric method for the determination of traces of selenium(IV) is described. The method is based on oxidation of p-nitroaniline by selenium(IV) followed by coupling reaction with N-(1-naphthalene-1-yl)ethane-1,2-diamine dihydrochloride (NEDA) in neutral medium to give red colored derivative with lambda(max) 515 nm and is stable for more than 10 days at 35 degrees C. Beer's law is obeyed for selenium(IV) in the concentration range of 0.02-3.2 microg ml(-1) at the wavelength of maximum absorption. The optimum reaction conditions and other analytical parameters were investigated to enhance the sensitivity of the present method. The detailed study of various interferences made the method more selective. The proposed method was successfully applied to the analysis of selenium in polluted water, natural water samples, plant material, soil samples, and synthetic mixtures. The results obtained were agreed with the reported methods at the 95% confidence level. The performance of proposed method was evaluated in terms of Student's t-test and Variance ratio f-test which indicates the significance of proposed method over reported method.

Detection of lead in vegetables with new chromogenic reagent by spectrophotometry

A new simple, rapid selective and highly sensitive chromogenic reagent dibromo-p-methyl-carboxyazo (DBMCA) was synthesized and studied in detail for the spectrophotometric detection of lead. In 0.25 M phosphoric acid medium, which greatly increases the selectivity, Lead reacts with DBMCA to form a 1:2 blue complex having a sensitivity absorption peak at 646 nm. Under optimal conditions, Beer's Law is obeyed over the range from 0.09 to 0.8 microg mL(-1) Pb (II) and the apparent molar absorptivity is 1.03 x 10(5) mL(-1) cm(-1). The detection limit and the variation coefficient were found to be 2.12 microg mL(-1) and 1.0% respectively. It is found that, except for Ca (II) and Ba (II) all foreign ions studied do not interfere with detection. The interference caused by Ca (II) and Ba (II) can be easily eliminated by prior extraction with potassiumiodide-methylisobutylketone. The proposed method has been applied successfully for to the detection of Lead in vegetable leaves with good results.

The determination of nickel(II) after on-line sorbent preconcentration by inductively coupled plasma atomic emission spectrometry using Borassus Flabellifer inflorescence loaded with coniine dithiocarbamate

A procedure was developed for the determination of nickel(II) in water samples by inductively coupled plasma atomic emission spectrometry (ICP-AES) after preconcentration on coniine dithiocarbamate (CDC) supported by Borassus Flabellifer inflorescence. The sorbed element was subsequently eluted with 0.4M nitric acid and the acid eluates are analysed by ICP-AES. The influence of various parameters such as pH, flow rate of sample, eluent concentration, volume of the sample and volume eluent were investigated. Under the optimal conditions, nickel in aqueous sample was concentrated about 100-fold. Nickel recovery was obtained by the proposed method in range of 98.9-99.9%. This method is also applied for the analysis of spiked and natural water samples. The results provide strong evidence to support the hypothesis of an adsorption mechanism.

Determination of Nickel in Alloys and Plant Leaves with Salicylaldehyde 3-Oxobutanoylhydrazone by Spectrophotometry

A simple and highly sensitive reagent of salicylaldehyde 3-oxobutanoylhydrazone (salicylaldehyde acetoacetic acid hydrazone, SAAH) was synthesized and studied for the spectrophotometric determination of nickel in detail. In the pH range 6, which greatly increased the selectivity, nickel reacted with SAAH to form a 1:1 yellow complex, having a sensitive absorption peak at 405 nm. Under the optimal conditions, Beer's law was obeyed over the range from 0.0117 to 0.1174 microg cm(-3). The apparent molar absorptivity was 3.025 x 10(5) dm3 mol(-1) cm(-1). The detection limit and the variation coefficient were found to be 1.752 ng cm(-3) and 1.0%, respectively. The method has been applied to the quantitative determination of nickel in different alloys and leaves.