Nanocomposite thin films based on polyethylene vinyl acetate and piezoelectric nanomaterials

This paper aims at describing the fabrication and characterization of nanocomposite thin films based on polyethylene vinyl acetate, at different content of vinyl acetate, and piezoelectric nanomaterials, namely zinc oxide and barium titanate. These membranes were prepared by casting, achieving a thickness in the order of 160-210 μm. The nanocomposites were characterized in terms of morphological, mechanical and chemical properties, finding a homogeneous distribution of nanomaterials, and the elastic modulus ranges from 2 to 25 MPa, while keeping an elongation break from 750 to 1500 % and tensile strength from 2.5 MPa up to 10 MPa. These results show the potential of these nanocomposite formulations as smart composite thin films for a series of biomedical applications, including the regeneration of osteoarticular tissues.

Self-assembly of polydimethylsiloxane structures from 2D to 3D for bio-hybrid actuation

This work aims to demonstrate the feasibility of a novel approach for the development of 3D self-assembled polydimethylsiloxane structures, to be used as engineered flexible matrices for bio-hybrid actuation. We described the fabrication of engineered bilayers, organized in a 3D architecture by means of a stress-induced rolling membrane technique. Such structures were provided with ad hoc surface topographies, for both cell alignment and cell survival after membrane rolling. We reported the results of advanced finite element model simulations, predicting the system behavior in terms of overall contraction, induced by the contractile activity of muscle cells seeded on the membrane. Then, we tested in vitro the structure with primary cardiomyocytes to evaluate the real bio-actuator contraction, thus validating the simulation results. At a later stage, we provided the samples with a stable fibronectin coating, by covalently binding the protein on the polymer surface, thus enabling long-term cultures with C2C12 skeletal muscle cells, a more controllable cell type. These tests revealed cell viability and alignment on the rolled structures, but also the ability of cells to differentiate and to form multinucleated and oriented myotubes on the polymer surface, also supported by a fibroblast feeder layer. Our results highlighted the possibility of developing 3D rolled PDMS structures, characterized by different mechanical properties, as novel bio-hybrid actuators.

Long-Term Survival in Metastatic Melanoma Patients Treated with Sequential Biochemotherapy: Report of a Phase II Study

The overall survival for patients with metastatic melanoma is very poor, with a median survival of 8.5 months. In this Phase II trial, we assessed the efficacy, safety, and tolerability of a sequential biochemotherapy schedule, using dacarbazine as antiblastic agent and immunomodulant doses of interleukin-2 and interferon-alfa. Thirty-one eligible patients with metastatic melanoma received dacarbazine IV as antiblastic therapy and interluekin-2, plus interferon-alfa SC as sequential immunotherapy, for 6 months. Responding and nonprogressing patients were subsequently maintained on immunotherapy treatment for further 6 months. Twenty-nine patients had an adequate trial, and were assessable for both response and toxicities, with a median follow-up of 49 months. The overall response rate was 52 percent (3 CR and 12 PR), SD was 8 (27 percent) and PD were achieved in 6 patients (21 percent). The median survival duration of responders was 28 months, significantly longer (p < 0.001) than the 16 months of nonresponders. Therapy was well tolerated and produced a significant improvement in progressive-free survival. Further studies, thus, are recommended for larger groups of patients not only to confirm these results, but also to apply this biochemotherapy regimen as adjuvant postsurgical treatment in early stages of malignant melanoma.

Clear corneal incision of 2.75 mm for cataract surgery induces little change of astigmatism in eyes with low preoperative corneal cylinder

PURPOSE

To assess the early astigmatic effect induced by 2.75 mm clear cornea incisions with different locations for cataract surgery.

METHODS

A total of 146 eyes of different patients were studied prospectively. Cataract surgery was performed by three surgeons, two using a temporal approach and one using a superior approach. For both approaches, the site of the 2.75 mm incision was allowed to vary slightly according to the characteristics of the eye and orbit. Computerized videokeratography was used to measure corneal astigmatism before surgery and after 1, 4, and 12 weeks. Corneal astigmatism was recorded as cylinder and axis and it was then converted to 2 power vector. Model based prediction and comparisons were made for the most commonly used corneal incision sites: 12 (both eyes), 2 (left eye), and 8 (right eye) o'clock meridian.

RESULTS

After 3 months the differences in corneal astigmatism (JCC 0 ) between the incisions performed at 12 and 2 o'clock were not statistically significant (-0.08, 95% CI: -0.19, -0.02); the differences in JCC 0 between incisions at 12 and 8 o'clock were -0.17 (95% CI: -0.30, -0.05; p<0.01). After 3 months the change in JCC 0 for the patients with 0.5 D with-the-rule preoperatively were -0.32 (95% CI: -0.44, 0.21; p<0.01) for incisions at 12; -0.24 (95% CI: -0.36, 0.13; p<0.01) for incisions at 2; and -0.15 (95% CI: -0.27, -0.03; p<0.05) for incisions at 8. After 3 months the changes of JCC 0 for the patients with -0.5 D against-the-rule pre-operatively were 0.10 (95% CI: 0.04, 0.23) for incision at 12; 0.18 (95% CI: 0.04, 0.32; p<0.05) for incisions at 2; and 0.27 (95% CI: 0.14, 0.40; p<0.01) for incisions at 8 o'clock. The oblique astigmatic vector (JCC 45 ) was very modest in this sample before surgery and underwent minimal and nonsignificant change after it.

CONCLUSIONS

This study has shown that a 2.75 mm clear corneal incision causes a small change of corneal cylinder regardless of incision site.

Nitric oxide proxies and ocular perfusion pressure in primary open angle glaucoma

BACKGROUND

To investigate the levels of nitric oxide (NO) markers in plasma and aqueous humour of patients with primary open angle glaucoma (POAG) and their relation to ocular perfusion pressure.

METHODS

Cyclic guanosine monophosphate (cGMP) and nitrite (NO(2)(-)) were determined in plasma and aqueous humour of 38 patients with POAG and 46 controls. Blood pressure and IOP were measured to calculate ocular perfusion pressure (PP).

RESULTS

cGMP and NO(2)(-) plasma levels were significantly decreased in glaucoma patients compared with controls (p = 0.001 v p = 0.004). In the aqueous humour of subjects with POAG, cGMP and NO(2)(-) concentrations were also lower than in normal eyes (p = 0.0001 v p = 0.001). There was a linear association between cGMP in plasma and aqueous humour in glaucomas and controls (r = 0.514, p = 0.029 and r = 0.558, p = 0.004) and this relation differed in the two groups (p = 0.003). Considering glaucoma patients with controls, a positive correlation was found between cGMP and PP (r = 0.379, p = 0.01) and between NO(2)(-) and PP (r = 0.339, p = 0.040). The cGMP/PP correlation was of borderline statistical significance in controls (p = 0.050), whereas it did not attain statistical significance in POAG, as well as the association between NO(2)(-) and PP when glaucomas and controls were considered separately.

CONCLUSIONS

The authors found alterations of NO markers in the plasma and aqueous humour of glaucoma patients. Primary or secondary impaired NO balance could alter ocular perfusion pressure.