Surface ligand-directed pair-wise hydrogenation for heterogeneous phase hyperpolarization

para-Hydrogen induced polarization is a technique of magnetic resonance hyperpolarization utilizing hydrogen's para-spin state for generating signal intensities at magnitudes far greater than state-of-the-art magnets. Platinum nanoparticle-catalysts with cysteine-capping are presented. The measured polarization is the highest reported to date in water, paving pathways for generating medical imaging contrast agents.

Hyperpolarization of amino acid derivatives in water for biological applications

We report on the successful synthesis and hyperpolarization of N-unprotected α-amino acid ethyl propionate esters and extensively, on an alanine derivative hyperpolarized by PHIP (4.4 ± 1.0% 13C-polarization), meeting required levels for in vivo detection. Using water as solvent increases biocompatibility and the absence of N-protection is expected to maintain biological activity.

Macro-scale topology optimization for controlling internal shear stress in a porous scaffold bioreactor

Shear stress is an important physical factor that regulates proliferation, migration, and morphogenesis. In particular, the homeostasis of blood vessels is dependent on shear stress. To mimic this process ex vivo, efforts have been made to seed scaffolds with vascular and other cell types in the presence of growth factors and under pulsatile flow conditions. However, the resulting bioreactors lack information on shear stress and flow distributions within the scaffold. Consequently, it is difficult to interpret the effects of shear stress on cell function. Such knowledge would enable researchers to improve upon cell culture protocols. Recent work has focused on optimizing the microstructural parameters of the scaffold to fine tune the shear stress. In this study, we have adopted a different approach whereby flows are redirected throughout the bioreactor along channels patterned in the porous scaffold to yield shear stress distributions that are optimized for uniformity centered on a target value. A topology optimization algorithm coupled to computational fluid dynamics simulations was devised to this end. The channel topology in the porous scaffold was varied using a combination of genetic algorithm and fuzzy logic. The method is validated by experiments using magnetic resonance imaging readouts of the flow field.

Temperature dependence of the nitrogen-vacancy magnetic resonance in diamond

The temperature dependence of the magnetic-resonance spectra of nitrogen-vacancy (NV-) ensembles in the range of 280-330 K was studied. Four samples prepared under different conditions were analyzed with NV- concentrations ranging from 10 ppb to 15 ppm. For all samples, the axial zero-field splitting (ZFS) parameter D was found to vary significantly with temperature, T, as dD/dT=-74.2(7) kHz/K. The transverse ZFS parameter E was nonzero (between 4 and 11 MHz) in all samples, and exhibited a temperature dependence of dE/(EdT)=-1.4(3)x10{-4} K-1. The results might be accounted for by considering local thermal expansion. The temperature dependence of the ZFS parameters presents a significant challenge for diamond magnetometers and may ultimately limit their bandwidth and sensitivity.

Multipole shimming of permanent magnets using harmonic corrector rings

Shimming systems are required to provide sufficient field homogeneity for high resolution nuclear magnetic resonance (NMR). In certain specialized applications, such as rotating-field NMR and mobile ex situ NMR, permanent magnet-based shimming systems can provide considerable advantages. We present a simple two-dimensional shimming method based on harmonic corrector rings which can provide arbitrary multipole order shimming corrections. Results demonstrate, for example, that quadrupolar order shimming improves the linewidth by up to an order of magnitude. An additional order of magnitude reduction is in principle achievable by utilizing this shimming method for z-gradient correction and higher order xy gradients.

Numerical and experimental studies of long-range magnetic dipolar interactions

We describe several numerical methods developed to analyze the behavior of spin polarized liquids in the presence of long-range magnetic dipolar interactions and external field gradients. Two of the methods use a discrete lattice of spins. In the first we calculate the magnetic field from the lattice of spins directly, either in the rotating frame, or in the lab frame. In the second method we include the dipolar fields from linear magnetization gradients analytically and calculate the dipolar fields from higher order gradients in Fourier space, where they are a local function of the magnetization. In the third method the magnetization is expanded in a Taylor series and the dipolar fields are calculated analytically for each term. The results of these calculations are compared to experimental data, in which we use two superconducting quantum interference device magnetometers adjacent to a spherical sample of hyperpolarized liquid 129Xe to detect the evolution of magnetization gradients. In particular, we observe an increase by a factor of 100 of the spin dephasing time in a longitudinal magnetic field gradient due to dipolar interactions of the spins. While each of the numerical techniques has certain limitations, they are generally in agreement with each other and with experimental data.

Magnetic resonance imaging of thermal coagulation effects in a phantom for calibrating thermal therapy devices

A material has been developed and tested that permanently records thermal response patterns from heating devices. The material consists of a mixture of polyacrylamide and 18% w/w bovine serum albumin. Thermal denaturation is complete when the local temperature exceeds 70 degrees C, causing a large reduction in the T2 of the material. Three-dimensional distributions of "thermal damage" can be assessed using standard magnetic resonance imaging sequences. The material works well with microwave heating devices and is adaptable for use with ultrasound, radio-frequency, or laser heating devices. Suggested uses include characterizing heating devices prior to treatment and developing new clinical applications for thermal therapies.

Stimulation of bone healing by transforming growth factor-beta 1 released from polymeric or ceramic implants

The ability to transforming growth factor-beta 1 (TGF-beta 1), to stimulate bone healing was evaluated in a rat critical calvarial defect model. Both a low dose and a high dose of TGF-beta 1 were incorporated into two different types of implants: one made from a composite of poly(lactic-co-glycolic acid) (PLPG) (50:50) and demineralized bone matrix (DBM), and the other from calcium sulfate (CaSO 4). Scanning electron microscopy showed that the CaSO 4 implants were more porous than the PLPG/DBM samples. Both types of implants released biologically active TGF-beta 1 for over 300 h in vitro. The samples were implanted in a 9-mm diameter rat calvarial defect for 6 weeks along with contralateral control implants containing no TGF-beta 1. Microradiography and histological analysis were used to assess the bone healing in the defects. Microradiography revealed that the greatest amount of calcified bone (67.5%) was present in in the CaSO 4 implants containing a high dose of TGF-beta 1 while minimal new bone formation occurred in the PLPG/DBM implants. Histologically, the PLPG/DBM implants exhibited an inflammatory response with little mineralization or bone formation. The defects containing the PLPG/DBM implants consisted of a connective tissue stroma with large void spaces. Giant cells and numerous polymorphonuclear leukocytes were present throughout the implants. In contrast, the CaSO 4 implants had only a few inflammatory cells and the presence of mineralization and true bone was a more consistent feature. These preliminary studies show that TGF-beta 1 is capable of inducing new bone formation. Furthermore, the materials used to deliver the growth factor can play a significant role in the bone healing process.

Controlled release of TGF-beta 1 from a biodegradable matrix for bone regeneration

Although bone has a remarkable capacity for regenerative growth, there are many clinical situations in which the bony repair process is impaired. TGF-beta 1 is a 25 kD homodimeric protein which modulates the growth and differentiation of many cell types. The ability of TGF-beta 1 to promote bone formation suggests that it may have potential as a therapeutic agent in disease of bone loss. However, there still exists a need for an effective method of delivering TGF-beta 1 to the site of an osseous defect for the promotion of bone healing. This paper describes a novel biodegradable controlled release system for TGF-beta 1 comprised of poly (DL-lactic-co-glycolic acid) (PLPG) and demineralized bone matrix (DBM). The amount and activity of TGF-beta 1 released was determined using several methods including 125I-labeled TGF-beta 1 as a tracer, an enzyme linked immunosorbent assay (ELISA) and a growth inhibitory assay (GIA). Protein was released from the devices for time periods of more than 600 h. The amount of TGF-beta 1 released was directly proportional to both the TGF-beta 1 loading and the weight percent of DBM in the device. The release kinetics could be further controlled by applying polymeric coatings of varying porosity to the devices. The GIA indicated that between 80 and 90% of the TGF-beta 1 released from the delivery system retained its bioactivity. The PLPG and DBM existed in phase separated domains within the device as determined by differential scanning calorimetry. Scanning electron microscopy suggested that the devices were sufficiently porous to allow bone ingrowth.

CD19 is functionally and physically associated with surface immunoglobulin

The pan-B and B cell-specific sIg and CD19 antigens are functionally and physically associated in the presence of anti-Ig mAb. Incubation of B cells with anti-Ig antibodies causes rapid, specific, reversible, concentration-dependent, and unidirectional comodulation of CD19 on every mature B cell studied. Comodulation is produced by mAbs specific for the gamma, mu, kappa, and lambda chains of Ig, and by at least one idiotype-specific mAb. Comodulation is observed using 15 CD19-specific mAbs that detect at least three different CD19 epitopes. Of 18 surface antigens studied, only CD19 is comodulated. Loss of sIg and CD19 occurs concurrently during anti-Ig modulation and demonstrates a comparable dependence on anti-Ig concentration, suggesting that these are parallel rather than serial events. Incubation with anti-Ig specifically cocaps and suggests internalization of anti-CD19 mAb. Comodulation of sIg and CD19 by anti-Ig but not anti-CD19 mAbs suggests that ligand binding enables sIg to then interact with CD19. We propose that CD19 is a component of the B cell antigen receptor and suggest that it could facilitate signal transduction by sIg-antigen complexes.