Contact lenses for antifungal ocular drug delivery: a review

INTRODUCTION

Fungal keratitis, a potentially blinding disease, has been difficult to treat due to the limited number of approved antifungal drugs and the taxing dosing regimen. Thus, the development of a contact lens (CL) as an antifungal drug delivery platform has the potential to improve the treatment of fungal keratitis. A CL can serve as a drug reservoir to continuously release drugs to the cornea, while limiting drug loss through tears, blinking, drainage and non-specific absorption.

AREAS COVERED

This review will provide a summary of currently available methods for delivering antifungal drugs from commercial and model CLs, including vitamin E coating, impregnated drug films, cyclodextrin-functionalized hydrogels, polyelectrolyte hydrogels and molecular imprinting. This review will also highlight some of the main factors that influence antifungal drug delivery with CLs.

EXPERT OPINION

Several novel CL materials have been developed, capable of extended drug release profiles with a wide range of antifungal drugs lasting from 8 h to as long as 21 days. However, there are factors, such as first-order release kinetics, effectiveness of continuous drug release, microbial resistance, ocular toxicity and potential complications from inserting a CL in an infected eye, that still need to be addressed before commercial applications can be realized.

In vitro uptake and release of natamycin Dex-b-PLA nanoparticles from model contact lens materials

PURPOSE

To evaluate the uptake and release of the antifungal agent natamycin encapsulated within poly(D,L-lactide)-dextran nanoparticles (Dex-b-PLA NPs) from model contact lens (CL) materials.

METHODS

Six model CL materials (gel 1:poly(hydroxyethyl methacrylate, pHEMA); gel 2:85% pHEMA: 15% [Tris(trimethylsiloxy)silyl]-propyl methacrylate (TRIS); gel 3: 75% pHEMA: 25% TRIS; gel 4: 85% N,N dimethylacrylamide (DMAA): 15% TRIS; gel 5:75% DMAA: 25% TRIS; and gel 6: DMAA) were prepared using a photoinitiation procedure. The gels were incubated in: (1) natamycin dissolved in deionized (DI) water and (2) natamycin encapsulated within Dex-b-PLA NPs in dimethylsulfoxide/DI water. Natamycin release from these materials was monitored using UV-visible spectrophotometry at 304 nm over 7 d.

RESULTS

Natamycin uptake by all model CL materials increased between 1 and 7 d (p < 0.001). The uptake of natamycin-NPs was higher than the uptake of the drug alone in DI water (p < 0.05). Drug release was higher in materials containing DMAA than pHEMA (p < 0.05). All gels loaded with natamycin-NPs also released more drug compared to gels soaked with natamycin in DI water (p < 0.001). After 1 h, CL materials loaded with natamycin alone released 28-82% of the total drug release. With the exception of gel 6, this burst released was reduced to 21-54% for CL materials loaded with natamycin-NPs.

CONCLUSIONS

Model CL materials loaded with natamycin-Dex-b-PLA NPs were able to release natamycin for up to 12 h under infinite sink conditions. DMAA-TRIS materials may be more suitable for drug delivery of natamycin due to the higher drug release observed with these materials.

Nanoscale Characteristics of Ocular Lipid Thin Films Using Kelvin Probe Force Microscopy

Purpose

To describe the use of Kelvin probe force microscopy (KPFM) to investigate the electrical surface potential of human meibum and to demonstrate successful use of this instrument on both human meibum and a meibum model system (six-lipid stock [6LS]) to elucidate nanoscale surface chemistry and self-assembly characteristics.

Materials and Methods

6LS and meibum were analyzed in this study. Mica-supported thin films were created using the Langmuir-Blodgett trough. Topography and electrical surface potential were quantified using simultaneous atomic force microscopy/KPFM imaging.

Results

Both lipid mixtures formed thin film patches on the surface of the mica substrate, with large aggregates resting atop. The 6LS had aggregate heights ranging from 41 to 153 nm. The range in surface potential was 33.0 to 125.9 mV. The meibum thin films at P = 5 mN/m had aggregates of 170 to 459 nm in height and surface potential ranging from 15.9 to 76.1 mV, while thin films at P = 10 mN/m showed an aggregate size range of 147 to 407 nm and a surface potential range of 11.5 to 255.1 mV.

Conclusions

This study showed imaging of the differences in electrical surface potential of meibum via KPFM and showed similarities in nanoscale topography. 6LS was also successfully analyzed, showing the capabilities of this method for use in both in vitro and ex vivo ocular research.

Translational Relevance

This study describes the use of KPFM for the study of ocular surface lipids for the first time and outlines possibilities for future studies to be carried out using this concept.

Evaluating the initial and end-of-day wettability of contemporary daily disposable contact lenses using various in vitro methods

SIGNIFICANCE

Contact lens wettability is potentially correlated with friction, which is linked to lens comfort. However, measuring wettability can be highly variable. This study assessed wettability using three techniques for a more accurate profile.

PURPOSE

To evaluate the wettability of contemporary daily disposable contact lenses after 16 hours on an in vitro model using the sessile drop, captive bubble, and a novel in vitro noninvasive keratograph breakup time (NIKBUT) method.

METHODS

The wettability of six contemporary silicone hydrogel contact lens materials (verofilcon A, delefilcon A, senofilcon A, kalifilcon A, stenfilcon A, and somofilcon A) and two conventional hydrogel materials (nesofilcon A and etafilcon A) were evaluated using an in vitro blink model at t = 0 and 16 hours. The blink rates of the eye model were 20 blinks per minute. Sessile drop and captive bubble angles were analyzed using the Optical Contact Analyzer. NIKBUT was assessed on a blink model in combination with the OCULUS Keratograph 5M.

RESULTS

There were no significant differences in wettability for any lens types between 0 and 16 hours when assessed using the captive bubble or NIKBUT methods (p>0.05). For the sessile drop method, verofilcon A had the lowest contact angle values (36.5 ± 2.9°), and all lenses except for etafilcon A had similar wettability after 16 hours. All the lenses had similar wettability when assessed using the captive bubble method, suggesting that they had similar wettability under optimal wetting conditions. For NIKBUT, delefilcon A had the longest NIKBUT values (9.0 ± 1.0 s) after 16 hours.

CONCLUSIONS

The sessile drop technique produced the most measurable differences in wettability between different lens types, whereas the captive bubble technique was not able to provide any measurable differences between lenses. NIKBUT measurements may provide a better measure of on-eye wettability, but variability in the results using the current eye model still needs to be addressed in future studies for improved repeatability. Although the contact lenses showed different contact angles and NIKBUT results, their in vitro wettability did not significantly change over the 16 hours of simulated wear in terms of the captive bubble or NIKBUT values.

Determining the Toxicity of UV Radiation and Chemicals on Primary and Immortalized Human Corneal Epithelial Cells

This article describes the methods of measuring the toxicity of ultraviolet (UV) radiation and ocular toxins on primary (pHCEC) and immortalized (iHCEC) human corneal epithelial cell cultures. Cells were exposed to UV radiation and toxic doses of benzalkonium chloride (BAK), hydrogen peroxide (H2O2), and sodium dodecyl sulfate (SDS). Metabolic activity was measured using a metabolic assay. The release of inflammatory cytokines was measured using a multi-plex interleukin (IL)-1β, IL-6, IL-8, and tumor necrosis factor-alpha (TNF-α) assay, and cells were evaluated for viability using fluorescent dyes. The damaging effects of UV on cell metabolic activity and cytokine release occurred at 5 min of UV exposure for iHCEC and 20 min for pHCEC. Similar percent drops in metabolic activity of the iHCEC and pHCEC occurred after exposure to BAK, H2O2, or SDS, and the most significant changes in cytokine release occurred for IL-6 and IL-8. Microscopy of fluorescently stained iHCEC and pHCEC BAK-exposed cells showed cell death at 0.005% BAK exposure, although the degree of ethidium staining was greater in the iHCECs than pHCECs. Utilizing multiple methods of assessing toxic effects using microscopy, assessments of metabolic activity, and cytokine production, the toxicity of UV radiation and chemical toxins could be determined for both primary and immortalized cell lines.