Microsclerotia from Metarhizium robertsii: Production, ultrastructural analysis, robustness, and insecticidal activity

Microsclerotia (MS) are considered one of the most promising propagules for use as active ingredients in biopesticides due to their tolerance to abiotic factors and ability to produce infective conidia for the control of pests. Therefore, the objective of this research was to establish the conditions required to induce the formation of microsclerotia in Metarhizium robertsii Mt004 and to study its development process, tolerance to abiotic factors and insecticidal activity of MS-derived conidia. M. robertsii started to form hyphal aggregates after 2 days and looked more compact after 8 days. MS were mature and pigmented after 20 days. The final yield was 2.0 × 103 MS/mL and MS size varied between 356.9 and 1348.4 μm. Ultrastructure analysis revealed that mature MS contained only a few live cells embedded in an extracellular matrix. Mature MS were more tolerance to UV-B radiation, heat and storage trials than conidia from Solid State Fermentation. MS-derived conidia were as virulent as conidia against Diatraea saccharalis larvae. These results showed that MS are promising propagules for the development of more persistent and efficient biopesticides for harsh environmental conditions. Our findings provide a baseline for production and a better understanding of microsclerotia development in M. robertsii strains.

Metarhizium rileyi biopesticide to control Spodoptera frugiperda: Stability and insecticidal activity under glasshouse conditions

The insect-pathogenic fungus Metarhizium rileyi is highly sensitive to nutritional and environmental conditions which makes it difficult to produce as a stable biopesticide. In this study, a Colombian isolate of this fungus was produced in bulk, and conidia were formulated as an emulsifiable concentrate (EC). The stability of formulated conidia was studied. Conidial viability was maintained at >85 % viability for 12 m under refrigeration and for >three months at 18 °C. The pH values were stable, while contaminant content was significantly reduced. The efficacy of the EC to control Spodoptera frugiperda (Smith) was correlated with the storage time using different mathematical models, and conservative values of six and 12 months at 8 °C and 18 °C respectively, were established. Finally, the EC was evaluated in maize plants under glasshouse conditions. The LC₅₀ and LC₉₀ were estimated to be 1.17 × 10⁴ and 4.03 × 10⁶ conidia/mL respectively and a 57 % reduction in recent damage of plants was achieved. This study demonstrated the potential of M. rileyi formulated as EC to control S. frugiperda in maize. Therefore, it is necessary to continue developing this biopesticide, in order to deliver a new tool to be integrated in pest management programs.

Identification of Diatraea spp. (Lepidoptera: Crambidae) based on cytochrome oxidase II

Diatraea spp. (Lepidoptera: Crambidae) are a group of insects that are agriculture pests in many economically relevant crops such as sugarcane, sorghum, corn and rice. Recognized species for this genus respond differentially to natural enemies used in their biological control, emphasizing the importance of species in a regional approach. Currently, identification is based on the male genitalia. However, the availability of specimens collected from field and subjectivity based on the character recognition can seriously hamper species identification, and therefore result in inadequate pest management. To overcome this, individuals of Diatraea spp. preliminarily classified male genitalia and obtained from reared conditions and the field (both derived from natural populations occurring in Colombia) were analyzed using genitalic morphometry and molecular biology specifically using a fragment of the cytochrome oxidase subunit II (CO II) mitochondrial gene. Although morphometric analysis did not show any overriding results regarding genitalia morphology, the bioinformatics analyses of CO II sequences resulted in an adequate classification of the individuals within the recognized species. It also, revealed that the occurrence of clades associated with geographical distribution may be associated with cryptic species. The latter was also confirmed by a Single-Strand Conformation Polymorphism (SSCP) methodology evaluating the same fragment of CO II. This experimental approach allows properly recognizing each species and in consequence is proposed as an effective tool in Diatraea species identification.

PCR en tiempo real: una metodología útil para la detección y cuantificación de granulovirus

El uso de baculovirus como agentes de control biológico de insectos plaga, se ha convertido en una estrategia efectiva que se ha implementado gradualmente en diferentes sistemas productivos a nivel mundial. Para el desarrollo de un bioplaguicida a base de baculovirus, es necesario contar con una metodología para determinar el título viral en el producto en proceso y terminado. Para tal fin, en este trabajo se diseñó y optimizó una técnica de cuantificación viral (Betabaculovirus) mediante PCR cuantitativo (q-PCR). Se utilizó una sonda TaqMan diseñada sobre el gen de granulina, altamente conservado. Para la técnica de q-PCR se determinó la especificidad, sensibilidad y reproducibilidad, encontrando que puede detectar y cuantificar aislamientos del género Betabaculovirus provenientes de cinco especies diferentes de insectos (granulovirus de Tecia solanivora, Phthorimaea operculella, Erinnyis ello, Tuta absoluta y Spodoptera frugiperda) incluso de diferente origen geográfico, pero no detecta aislamientos del género Alphabaculovirus (nucleopoliedrovirus de Spodoptera ornithogalli, Diatraea saccharalis o S. frugiperda). El límite mínimo de detección de la técnica fue de 6,4 x 10-4 ng de ADN, lo que equivale a 1,25 x 105 copias del gen. Así mismo, la variación intra e inter ensayos fue mínima, demostrando la reproducibilidad de la misma. La aplicabilidad de la técnica fue evaluada para la detección de granulovirus en muestras de larva, suelo, y para determinar la concentración viral en un bioplaguicida formulado como concentrado emulsionable. En conclusión, la técnica de q-PCR desarrollada fue reproducible, sensible y específica, con aplicabilidad en estudios de persistencia viral en campo, control de infecciones en crías de insectos y control de calidad de bioplaguicidas a base de betabaculovirus.Palabras clave: Granulovirus, PCR cuantitativa, persistencia viral, control de calidad.

Evidence of recent interspecies horizontal gene transfer regarding nucleopolyhedrovirus infection of Spodoptera frugiperda

BACKGROUND

Baculoviruses are insect-associated viruses carrying large, circular double-stranded-DNA genomes with significant biotechnological applications such as biological pest control, recombinant protein production, gene delivery in mammals and as a model of DNA genome evolution. These pathogens infect insects from the orders Lepidoptera, Hymenoptera and Diptera, and have high species diversity which is expressed in their diverse biological properties including morphology, virulence or pathogenicity. Spodoptera frugiperda (Lepidoptera: Noctuidae), the fall armyworm, represents a significant pest for agriculture in America; it is a host for baculoviruses such as the Spodoptera frugiperda multiple nucleopolyhedrovirus (SfMNPV) (Colombia strain, genotype A) having been classified as a Group II alphabaculovirus making it a very attractive target for bioinsecticidal use.

RESULTS

Genome analysis by pyrosequencing revealed that SfMNPV ColA has 145 ORFs, 2 of which were not present in the other sequenced genotypes of the virus (SfMNPV-NicB, SfMNPV-NicG, SfMNPV-19 and SfMNPV-3AP2). An in-depth bioinformatics study showed that ORF023 and ORF024 were acquired by a recent homologous recombination process between Spodoptera frugiperda and Spodoptera litura (the Oriental leafworm moth) nucleopolyhedroviruses. Auxiliary genes are numerous in the affected locus which has a homologous region (hr3), a repetitive sequence associated with genome replication which became lost in SfColA along with 1 ORF. Besides, the mRNAs associated with two acquired genes appeared in the virus' life-cycle during the larval stage. Predictive studies concerning the theoretical proteins identified that ORF023 protein would be a phosphatase involved in DNA repair and that the ORF024 protein would be a membrane polypeptide associated with cell transport.

CONCLUSIONS

The SfColA genome was thus revealed to be a natural recombinant virus showing evidence of recent horizontal gene transfer between different baculovirus species occurring in nature. This feature could be the cause of its high insecticidal power and therefore SfColA becomes a great candidate for bioinsecticide formulations.

Selección de un sistema de atomización para la formación de micropartículas de Eudragit® S100 en lecho fluido

La elaboración de micropartículas en lecho fluido es de gran interés en la industria farmacéutica, alimentaria y agrícola, ya que este tipo de formulación permite controlar la liberación de ingredientes activos y su estabilidad y funcionalidad mediante la formación de pequeñas partículas sólidas. El lecho fluido es el equipo comúnmente usado en la industria para realizar el proceso y éste puede tener dos sistemas de atomización: superior (Top spray) e inferior (Bottom spray). En este trabajo se evaluaron los dos sistemas de atomización con miras a la formación de micropartículas de Eudragit® S100.<p>Se realizaron experimentos para ajustar los factores críticos del proceso y los niveles de éstos utilizando un diseño factorial multinivel y trabajando en un lecho fluido marca Glatt GmbH D – 01277. Los factores evaluados fueron la temperatura de entrada, la presión interna de la cámara y la velocidad de flujo. El material de recubrimiento consistió en un polímero del ácido metacrílico denominado Eudragit® S100 y como núcleo se empleó talco malla 325. El sistema seleccionado para la microencapsulación fue el de atomización superior (Top spray). Las condiciones de atomización establecidas fueron velocidad de flujo de 4,12 mL/min (flujo 8 rpm), temperatura de entrada de80ºC y presión interna de la cámara de 1 y 3 bares. Las micropartículas presentaron formas y tamaños homogéneos, menores de 100 μm.Las condiciones fijadas para el sistema de atomizaciónsuperior se pueden aplicar al desarrollo de procesos de microencapsulación de diferentes principios activos utilizando como polímero Eudragit® S100.</p>