Bioactive polymethyl methacrylate-based bone cement: comparison of glass beads, apatite- and wollastonite-containing glass-ceramic, and hydroxyapatite fillers on mechanical and biological properties

A new bioactive bone cement (designated GBC) consisting of polymethyl methacrylate (PMMA) as an organic matrix and bioactive glass beads as an inorganic filler has been developed. The bioactive beads, consisting of MgO-CaO-SiO(2)-P(2)O(5)-CaF(2) glass, have been newly designed, and a novel PMMA powder was selected. The purpose of the present study was to compare this new bone cement GBC's mechanical properties in vitro and its osteoconductivity in vivo with cements consisting of the same matrix as GBC and either apatite- and wollastonite-containing glass-ceramic (AW-GC) powder (designated AWC) or sintered hydroxyapatite (HA) powder (HAC). Each filler added to the cements amounted to 70 wt %. The bending strength of GBC was significantly higher than that of AWC and HAC (p < 0.0001). Cements were packed into intramedullar canals of rat tibiae in order to evaluate osteoconductivity as determined by an affinity index. Rats were sacrificed at 2, 4, and 8 weeks after operation. An affinity index, which equaled the length of bone in direct contact with the cement expressed as a percentage of the total length of the cement surface, was calculated for each cement. At each time interval studied, GBC showed a significantly higher affinity index than AWC or HAC up to 8 weeks after implantation (p < 0.03). The value for GBC increased significantly with time up to 8 weeks (p < 0.006). The handling property of GBC was comparable with that of PMMA bone cement. Our study revealed that the higher osteoconductivity of GBC was due to the higher bioactivity of the bioactive glass beads at the cement surface and the lower solubility of the new PMMA powder to MMA monomer. In addition, it was found that the smaller spherical shape and glassy phase of the glass beads gave GBC strong enough mechanical properties to be useful under weight-bearing conditions. GBC shows promise as an alternative with improved properties to the conventionally used PMMA bone cement.

Biological and mechanical properties of PMMA-based bioactive bone cements

We reported previously that a bioactive PMMA-based cement was obtained by using a dry method of silanation of apatite-wollastonite glass ceramic (AW-GC) particles, and using high molecular weight PMMA particles. But handling and mechanical properties of the cement were poor (Mousa et al., J Biomed Mater Res 1999;47:336-44). In the present study, we investigated the effect of the characteristics of PMMA powder on the cement. Different cements containing different PMMA powders (CMW1, Surgical Simplex, Palacos-R and other two types of PMMA powders with Mw 270,000 and 1,200,000) and AW-GC filler in 70 wt% ratio except Palacos-R (abbreviated as B-CMW1 and B-Surg Simp, B-Palacos 50 [50 wt% AW-GC filler] and B-Palacos 70 [70 wt% AW-GC filler], B-270 and B-1200) were made. Dough and setting times of B-CMW1, B-Surg Simp B-270 and B-1200 were similar to the commercial CMW1 cement which did not contain bioactive powder (C-CMW1), but B-palacos which contained large PMMA beads with high Mw had delayed setting time. B-270 had the highest bending strength among the tested cements. After 4 and 8 weeks of implantation in the medullary canals of rat tibiae, the bone-cement interface was examined using SEM. The affinity index of B-1200 was significantly higher than the other types of cements. B-270 showed good combination of handling properties, high mechanical properties and showed higher bioactivity with minimal soft tissue interposition between bone and cement compared with commercial PMMA bone cement. This may increase the strength of the bone-cement interface and increase the longevity of cemented arthroplasties.

Molecular genetic cascades for external genitalia formation: an emerging organogenesis program

External genitalia are anatomical structures located at the posterior embryonic region as part of several urogenital/reproductive organs. The embryonic anlage of the external genitalia, the genital tubercle (GT) develops as a bud-shaped structure with an initial urethral plate and later urethra. Embryonic external genitalia are considered to be one of the appendages. Recent experiments suggest that essential regulatory genes possess similar functions for the outgrowth regulation of the GT and limb appendages. The transient embryonic epithelia located in the distal GT are called the distal urethral epithelium (DUE) regulating, at least in part, the (distal) GT development. This review covers the available data about early patterning of GT and discusses the molecular developmental similarities and points of divergence between the different appendages. Development of the male and female external genitalia is also reviewed.

Tissue-specific and stage-specific expression of two silkworm ecdysone receptor isoforms -- ecdysteroid-dependent transcription in cultured anterior silk glands

Previously, we isolated a cDNA clone for the ecdysone receptor B1 isoform of the silkworm, Bombyx mori (BmEcR-B1). Here we report the cloning of a cDNA that encodes the Bombyx ecdysone receptor A isoform (BmEcR-A) and mRNA expression of the two BmEcR isoforms during molting and metamorphosis. At larval-pupal transformation, mRNA expression of BmEcR-B1 was predominant in most tissues examined, including three larval tissues (midgut, epidermis, and fat body) and the wing imaginal disc. The anterior silk gland was the only tissue where BmEcR-A was predominant. These expression patterns were different from observations demonstrated in Drosophila. In the anterior silk gland, both EcR isoforms were expressed synchronously during the fifth larval instar, while expression of the A isoform preceded that of the B1 isoform by two days in the fourth instar. Precedence of BmEcR-A during the fourth instar and synchronization of both isoforms during the fifth instar were also observed in the middle and posterior silk glands, suggesting that transcription of BmEcR in the silk gland is regulated differently in these two instars. In the cultured anterior silk glands of day 0 of the fifth instar, transcription of BmEcR-A and BmEcR-B1 was induced dose dependently by more than 5 ng/ml 20-hydroxyecdysone. BmEcR-A and BmEcR-B1 mRNAs were induced within 2 h and 1 h, respectively, of the addition of 20-hydroxyecdysone. These results suggest that the increase of BmEcR mRNAs during the fifth instar is induced in vivo by a small increase in ecdysteroids.

Quantitative MRI of the wrist and nerve conduction studies in patients with idiopathic carpal tunnel syndrome

OBJECTIVE

To correlate morphological findings of idiopathic carpal tunnel syndrome (CTS) with the function of the median nerve.

METHODS

In this study, 105 wrists of 105 women patients with idiopathic CTS, and 36 wrists of 36 female volunteers were subjected to nerve conduction studies and MRI. Cross sectional area, signal intensity ratio, and the flattening ratio of the median nerve, carpal tunnel area, flexor tendon area, synovial area, and intersynovial space, and the palmar bowing of the transverse carpal ligament (TCL) were quantified by MRI and correlated with the severity of the disease determined by nerve conduction studies.

RESULTS

Cross sectional areas of the median nerve, flexor tendons, and carpal tunnel, and the palmar bowing of the TCL of the CTS groups were greater than in the control group, but differences were not detected among the CTS groups for the area of the flexor tendons and the carpal tunnel. Enlargement, flattening, and high signal intensity of the median nerve at the distal radioulnar joint level were more significant in the advanced than in the earlier stages of the disease. Increase in palmar bowing of the TCL was less prominent in the most advanced group. Linear correlation between the area of the carpal tunnel and palmar bowing of the TCL was noted.

CONCLUSION

Severity of the disease could be judged by evaluating not only longitudinal changes of signal intensity and configuration of the median nerve, but also palmar bowing of the TCL. Increased palmar bowing of the TCL was found to be associated with an increase in the area of the carpal tunnel.

Early-phase enhanced inflammatory reaction after spinal instrumentation surgery

STUDY DESIGN

The erythrocyte sedimentation rate, C-reactive protein, white blood cell count, and body temperature were measured prospectively in patients after two types of spinal surgery without complications and three cases of infection after spinal instrumentation surgery.

OBJECTIVES

To investigate the effects of instrumentation on postoperative inflammatory reaction, and to describe early detection of postoperative wound infection.

SUMMARY OF BACKGROUND DATA

In thoracic and abdominal surgery as well as hip arthroplasty, C-reactive protein has proved more valuable than erythrocyte sedimentation rate for early detection of postoperative infectious complications. It has not yet been established, however, how inflammatory parameters change after surgery when spinal instruments have been inserted into the body.

METHODS

For this study, two groups of patients were examined: a control group that underwent spinal decompression surgery without instrumentation (n = 36) and another group that underwent spinal decompression and fusion surgery with spinal instrumentation (n = 37). The erythrocyte sedimentation rate, C-reactive protein, white blood cell count, and body temperature were recorded 1 day before surgery and on days 0 to 4, 7, 11, 14, 21, 28, and 42 after surgery.

RESULTS

Inflammatory indexes (i.e., C-reactive protein, erythrocyte sedimentation rate, white blood cell count, and body temperature) were significantly higher for the surgery with instrumentation than for the spinal decompression surgery without instrumentation. Multiple regression analysis showed that C-reactive protein and erythrocyte sedimentation rate peaks significantly correlated with the use of instrumentation (C-reactive protein: P = 0.000257, erythrocyte sedimentation rate: P = 0.000132). In the patients with infection after spinal instrumentation surgery, C-reactive protein, white blood cell count, and body temperature started to increase again 4 to 11 days after surgery. The elevation of erythrocyte sedimentation rate levels was prolonged.

CONCLUSIONS

Erythrocyte sedimentation rate and C-reactive protein display a significantly higher reaction after spinal surgery with instrumentation. Renewed elevation of C-reactive protein, white blood cell count, and body temperature after postoperative days 4 to 7 may be a critical sign of postoperative infection.

Accurate pedicle screw insertion under the control of a computer-assisted image guiding system: laboratory test and clinical study

We used a commercially available computer-assisted navigation system (StealthStation; Sofamor Danek, Memphis, TN, USA) in both an in-vitro and a clinical study performed in 1996-1998. The basic data used for navigation were preoperative computed tomography (CT) scan imaging data. The position of the probe or drill guide was superimposed in real-time on a monitor. For the in-vitro study, ten plastic lumbar spine models (50 vertebrae) were used. The entrance hole for the screw was made by drilling, following navigation. Using the navigation system, we drilled 88 holes through the pedicles into the vertebral bodies of 44 vertebral models. All 88 pedicle holes were contained within the pedicle without perforation. The mean deviation of the hole positions from the surgical plan was 1.78 +/- 0.81 mm, and the mean angular deviation was 2.28 degrees +/- 1.92 degrees. In 29 patients, using the navigation system, we introduced 169 pedicle screws at the planned position. Fifty-one screws were used for thoracic and 118 screws for lumbar spinal fixation. All screws correctly passed through the pedicles. There were no neurological complications after surgery. Using this guided surgery system, we achieved satisfactory results both in the laboratory and in a clinical setting.

Cervical pedicle screw insertion: assessment of safety and accuracy with computer-assisted image guidance

We used a commercially available computer-assisted image-guidance system for cervical pedicle screw insertion in both the laboratory and in a preliminary clinical setting. Nine plastic cervical spine models (C2-C7) were used in the laboratory test. The StealthStation was used to create the preoperative plan for each screw such that it would be inserted down the center of the pedicle, parallel to the long axis. Using a light-emitting diode-equipped drill guide, 2-mm holes were drilled in 108 pedicles. A total of 108 pedicle holes were drilled. The mean trajectory deviation from the surgical plan in the axial plane was 1.7+/-1.7 degrees (range, 0 to 8 degrees), and the mean deviation of the position of the hole was 1.7+/-0.6 mm (range, 0.1 to 2.9 mm). Eighty-three drill holes (76.9%) were contained within the pedicles, whereas partial cortical perforation was noted in 25 pedicles (23.1%). In the clinical setting, 36 cervical pedicle screws were inserted in nine patients using the image-guided system. Within the limits of imaging artifact, all 36 pedicle screws appear to have been inserted accurately by postoperative computed tomographic examination. No neurologic or vascular complications were encountered.

Hormonal control of a metamorphosis-specific transcriptional factor Broad-Complex in silkworm

Insect metamorphosis is induced by the steroid 20-hydroxyecdysone (20E) in the absence of sesquiterpenoid juvenile hormone (JH). In Drosophila melanogaster, the Broad-Complex (BR-C) transcriptional factor plays critical roles during metamorphosis. We isolated cDNAs encoding BR-C in the silkworm Bombyx mori and examined their mRNA expression. cDNAs for three BR-C isoforms with zinc finger pairs (Z1, Z2 and Z4) and four isoforms lacking them were cloned. Their mRNAs were expressed in multiple tissues at the larval-pupal metamorphosis. In the anterior silk gland, BR-C mRNAs were expressed at the end of the last larval instar but not expressed during the penultimate instar. 20E administration induced BR-C mRNA expression and JH suppressed 20E-induced BR-C expression in this tissue both in vivo and in vitro. Thus, BR-C mRNAs are inducible by 20E only in the absence of JH, a finding that explains their metamorphosis-specific expression.

Experimental spinal fusion with use of recombinant human bone morphogenetic protein 2

STUDY DESIGN

Posterolateral lumbar spinal fusion with use of recombinant human bone morphogenetic protein 2 (rhBMP-2) was tested in rabbits by implanting composites of rhBMP-2 and collagen carrier.

OBJECTIVES

To examine the bone-formation-inducing activity of rhBMP-2 and find the optimal amount of rhBMP to add to a collagen carrier to constitute bone-formation-inducing implants to be substituted for bone graft in posterolateral spinal fusion in rabbits.

SUMMARY OF BACKGROUND DATA

In animal models, rhBMP-2--impregnated collagen has been successfully used for posterolateral spinal fusion, indicating that it is a potential substitute for the autogenous corticocancellous bone graft currently used most routinely in posterolateral lumbar spinal fusion.

METHODS

Nine rabbits were divided into three equal groups. The bilateral L4-L5 transverse processes were exposed, and collagen strips impregnated with rhBMP-2 (10, 50, or 200 micrograms) were placed on the left transverse processes, and collagen strips alone were inserted on the right. All rabbits were killed 24 weeks after surgery. The implanted sites were assessed for new bone formation and bony fusion by radiography and histologic examination.

RESULTS

New bone formation was noted in intertransverse spaces on the left side of all rabbits except one (10 micrograms rhBMP-2). Twelve weeks after implantation, no new bone formation was seen on the right side of all animals. The newly formed bone masses were significantly larger in the 50-microgram and 200-microgram rhBMP-2 groups than in the 10-microgram rhBMP-2 group (P < 0.01), but there was no significant difference between bone formation in the 50-microgram and 200-microgram groups (P = 0.647).

CONCLUSIONS

The rhBMP-2/collagen composite implant was an effective bone graft substitute for achieving posterolateral spinal fusion. When combined with a collagen carrier, the optimal rhBMP-2 dose for achieving posterolateral spinal fusion seemed to be approximately 50 micrograms per segment in rabbits.

cDNA cloning and characterization of Bombyx mori juvenile hormone esterase: an inducible gene by the imidazole insect growth regulator KK-42

The insect growth regulator (IGR) imidazole KK-42 induces hemolymph juvenile hormone esterase activity and precocious metamorphosis in Bombyx mori. As an initial step to understand the molecular action of KK-42, we isolated a full-length of juvenile hormone esterase cDNA from B. mori (BmJHE). The deduced amino acid sequence of BmJHE showed high identity to JHEs of Heliothis virescens (54%) and Choristoneura fumiferana (52%). Recombinant BmJHE protein expressed in the baculovirus expression system hydrolyzed 3H-JH III and JH analog, HEPTAT, indicating that BmJHE cDNA encodes functional JH esterase. Northern blot analysis showed that the BmJHE transcript was present predominantly in the fat body at the beginning of the last larval instar. During this instar, BmJHE transcript increased gradually until day 7, then decreased, and increased again on day 10 in the fat body. This temporary expression pattern was similar to that of JHE enzyme activity in hemolymph. In contrast, in the 4th instar, the BmJHE transcript was present in the fat body even though hemolymph JHE activity was very low. Western blot analysis using anti-BmJHE antiserum showed BmJHE protein was present in hemolymph during the 5th instar but not during the 4th instar. These results indicate that BmJHE protein is secreted into hemolymph at the metamorphic stage. Hemolymph JHE activity was high in precociously metamorphosed 4th instar larvae (treated KK-42) but low in normal 4th and extra-molted 6th instar larvae (fed 20E). KK-42-treated larvae showed high expression level of BmJHE transcript in the fat body, suggesting that KK-42 enhances BmJHE gene expression in the fat body.

Molecular cloning of an ecdysone receptor (B1 isoform) homologue from the silkworm, Bombyx mori, and its mRNA expression during wing disc development

We reported the isolation and sequence of a clone encoding a putative ecdysone receptor B1 isoform of the silkworm, Bombyx mori. The predicted open reading frame encoded 543 amino acids, with 51%, 95% and 71% identities with the Drosophila melanogaster ecdysone receptor B1 isoform in the N terminal A/B region, DNA binding domain (C region) and ligand binding domain (E region), respectively. A single 6.2 kb message for the EcR gene was abundant in wing discs and fat bodies at the onset of metamorphosis. At the same stage, however, no or a tiny amount of mRNA was shown in posterior or middle silk glands, respectively. During the final instar, the mRNA expression in wing discs was maximal on the day of wandering. These data suggest the transcription of the Bombyx EcR gene is regulated in tissue-specific and stage-specific manner during metamorphosis.

Resting energy expenditure and its determinants in hemodialysis patients

OBJECTIVE

Chronic kidney disease is associated with several metabolic disturbances that can affect energy metabolism. As resting energy expenditure (REE) is scarcely investigated in patients on hemodialysis (HD) therapy, we aimed to evaluate the REE and its determinants in HD patients.

DESIGN

Cross-sectional study.

SETTING

Dialysis Unit of the Nephrology Division, Federal University of São Paulo, Brazil.

SUBJECTS

The study included 55 patients (28 male, 41.4+/-12.6 years old) undergoing HD therapy thrice weekly for at least 2 months, and 55 healthy individuals pair matched for age and gender. Subjects underwent fasting blood tests, as well as nutritional assessment, and the REE was assessed by indirect calorimetry.

RESULTS

REE of HD patients was similar to that of pair-matched controls (1379+/-272 and 1440+/-259 kcal/day, respectively), even when adjusted for fat-free mass (P=0.24). REE of HD patients correlated positively with fat-free mass (r=0.74; P<0.001) and body mass index (r=0.37; P<0.01), and negatively with dialysis adequacy (r=-0.46; P<0.001). No significant univariate correlation was found between REE and age, dialysis vintage, serum creatinine, urea, albumin, bicarbonate, parathyroid hormone (PTH) or high-sensitivity C-reactive protein (CRP). In the multiple linear regression analysis, using REE as dependent variable, the final model showed that besides the well-recognized determinants of REE such as fat-free mass and age, PTH and CRP were the independent determinants of REE in HD patients (R (2)=0.64).

CONCLUSIONS

In this study, the REE of HD patients was similar to that of healthy individuals, even with the positive effect of secondary hyperparathyroidism and inflammation on REE of these patients.

Molecular cloning of silkworm paralytic peptide and its developmental regulation

The silkworm paralytic peptide (PP) is a member of the ENF peptide family that exerts multiple biological activities involved in defense reaction and growth regulation. We isolated its cDNA and examined mRNA expression profiles. cDNA encoded 131 amino acids from which the 23-residue PP sequence was found at the C-terminal portion. Immunoblot analysis and paralytic activity assay indicated that inactive pro-protein in larval hemolymph was processed into active peptide immediately after bleeding. In the last larval instar, 0.6-kb PP mRNA was expressed in various tissues, of which the fat body was predominant. Its expression in the fat body decreased during the feeding period and then increased during metamorphic process. Juvenile hormone and 20-hydroxyecdysone upregulated its expression. At the embryonic stage, 1.5-kb mRNA, in addition to 0.6-kb mRNA, was expressed from 1 day after oviposition to hatching. PP was thus expressed stage-specifically under hormonal control.

Functional retinoid receptors in budding ascidians

A homolog of retinoid X receptors (RXR), named PmRXR, was cloned from the budding ascidian, Polyandrocarpa misakiensis. Gel-shift assays revealed that PmRXR and a previously identified P. misakiensis retinoic acid receptor (PmRAR) formed a complex to bind vertebrate-type retinoic acid response element (RARE). Transfection assays were carried out using a reporter gene containing a RARE upstream of lacZ. Two chimeric effector genes were constructed by placing PmRXR and PmRAR cDNA fragments (containing the DNA-binding, ligand-binding and ligand-dependent transactivation domains) downstream of the human RXR alpha and RAR alpha cDNA (covering the N-terminal coding region), respectively. Each chimeric cDNA was ligated to a notochord-specific enhancer. In case the embryos were transfected with all three transgenes and treated with retinoic acid (RA), the reporter gene was activated in the notochord cells. The result suggests that the PmRXR/PmRAR complex functions as an RA-dependent transcriptional activator. The PmRXR mRNA was detected in a mesenchymal cell type, called glomerulocyte, in the developing Polyandrocarpa bud. As this cell type has been shown to express PmRAR mRNA, it seems possible that the PmRXR/PmRAR complex mediates RA signaling in this cell type to induce the expression of genes involved in the morphogenesis of the developing bud.

Significant improvement of bone mineral density and bone turnover markers by denosumab therapy in bisphosphonate-unresponsive patients

Bone mineral density (BMD) sometimes cannot be improved by long-term bisphosphonate (BP) therapy in osteoporosis (OP). This study showed that lumbar as well as hip BMD significantly increased after denosumab treatment in patients not responsive to BPs. Thus, denosumab may be a strong OP treatment option for BP-unresponsive patients.

INTRODUCTION

BMD sometimes cannot be improved by long-term BP therapy.

METHODS

We administered denosumab to osteoporotic patients with a poor response to BPs who had been taking them for 2 years or longer. Ninety-eight women with BP-poor responsive OP were enrolled in this study. Mean (standard deviation [SD]) age was 71.2 (6.9) years and mean (SD) duration of BP treatment was 59.9 (34.3) months. We distinguished BP responders from non-responders based on changes in BMD values at denosumab commencement (baseline) from 2 years beforehand.

RESULTS

There were no significant differences in age, duration of BP use, bone turnover markers, or BMD at baseline between the groups. Prior to denosumab, BMD had increased significantly in responders and decreased significantly in non-responders. Bone turnover markers had decreased significantly at 4 months of denosumab treatment (P < 0.001) and lumbar and hip BMD were significantly increased at 1 year of therapy in both groups (P < 0.001). Simple correlation coefficients were -0.337 for lumbar and -0.339 for hip BMD changes (both P = 0.001) before and after denosumab treatment. Both at the lumbar spine and hips, decreased BMD before denosumab therapy was significantly associated with an increase in BMD at 1 year of treatment (spine, t value = -3.502, P = 0.001, R = 0.113; hip, t value = -3.526, P = 0.001, R = 0.115).

CONCLUSIONS

These results suggest that denosumab may be a strong OP treatment option for BP-unresponsive patients.

Percutaneous transpedicular biopsy of thoracic and lumbar vertebrae--method and diagnostic validity

BACKGROUND

Percutaneous transpedicular needle biopsy was performed on thoracic and lumbar vertebral bodies with a thin trocar (2.0 mm outer diameter) under observation with a conventional X-ray image intensifier in order to establish a correct histopathological diagnosis. We also evaluated the clinical validity of this less invasive diagnostic method in terms of the accuracy of the pathological diagnosis.

METHODS

Twenty-eight thoracic or lumbar vertebrae of 26 patients with abnormalities observed on routine X-ray, CT, or MRI images underwent percutaneous transpedicular needle biopsy under local anesthesia. A threaded trocar with an outer diameter of 2.0 mm was screwed into the intra-vertebral lesion through the pedicle from the posterior side under control of X-P imaging, and a small amount of tissue or fluid was collected.

RESULTS

For all patients but two, where inadequate specimens were obtained, correct diagnoses were made, which were confirmed by pathological diagnoses of massive tissue obtained during subsequent reconstructive surgery.

CONCLUSIONS

The accuracy rate of diagnosis with this biopsy method was 92% without significant intra- or postoperative complications. Therefore, it can be concluded that this less invasive biopsy method used in conjunction with conventional X-ray apparatus has good potential to result in correct preoperative diagnosis of thoracic and lumbar lesions so that more effective treatment can be determined.

Postoperative nerve conduction changes after open and endoscopic carpal tunnel release

OBJECTIVE

To assess the improvement of motor distal latency (MDL), sensory nerve conduction velocity (SCV) of the median nerve and the amplitudes of compound muscle action potential (CMAP) and sensory nerve action potential (SNAP) in patients with idiopathic carpal tunnel syndrome subjected to surgical treatment according to the open carpal tunnel release method and the endoscopic carpal tunnel release.

METHODS

Sixty-six hands of sixty-six patients were divided into two groups: the ECTR group and the OCTR group. The patients were evaluated preoperatively, and at 1, 3, 6, and 12 months postoperatively.

RESULTS

Although no statistically significant difference of the recovery of MDL and the amplitude of CMAP and SNAP was detected between the two groups at any time point during follow-up, one patient in the ECTR group in whom the operation had been converted to OCTR, showed delay of MDL and decrease in the amplitude of CMAP.

CONCLUSIONS

There is a risk of nerve damage in patients undergoing ECTR. Although statistical analysis suggests that nerve conduction improves by about the same degree 12 months after ECTR or OCTR, slightly faster improvement after OCTR cannot be excluded.

Molecular cloning, expression analysis and functional confirmation of two ecdysone receptor isoforms from the rice stem borer Chilo suppressalis

PCR techniques were used to clone and identify cDNAs for ecdysone receptor A and B1 (EcR-A and EcR-B1) isoforms from the rice stem borer, Chilo suppressalis. They differ only in the N-terminal A/B regions and show high sequence identities to other insects' EcRs. At the wandering stage, EcR-B1 mRNA was expressed more abundantly in the midgut than in the epidermis and fat body, whereas expression levels of EcR-A mRNA were similar in the three tissues. In the epidermis of the last instar larvae, the maximal mRNA expression of both EcR-A and EcR-B1 was observed from the wandering to prepupal stages prior to the peak of ecdysteroid titer in the hemolymph. In gel mobility shift assays, in vitro translated C. suppressalis EcR-B1 (CsEcR-B1) and Bombyx mori ultraspiracle (BmUSP) proteins bound to the Pal 1 and Drosophila melanogaster hsp27 ecdysone response element as a heterodimer. These results indicate that the cDNAs isolated here encode functional ecdysone receptors.

Bioactive bone cement: effect of surface curing properties on bone-bonding strength

The fact that bisphenol-a-glycidyl methacrylate (bis-GMA)-based cements contain an uncured surface is believed to play an important role when determining the surface curing properties of the cements. Therefore, in the present study, the bone-bonding strength of cement plates having an uncured surface on one side and a cured surface on the other side has been evaluated. These cement plates were composites of a bis-GMA-based resin with either an apatite- and wollastonite-containing glass-ceramic (AW-GC) powder or a hydroxyapatite (HA) powder, respectively designated AWC and HAC. The amount of each of these powders in a composite cement was 70 wt %. We formulate the hypothesis that the uncured surface of a cement plate is bioactive having bone-bonding properties. The goal of the present study was to indicate the bone-bonding strength of the uncured surfaces of AWC and HAC and compare the strength with the respective cured surfaces by a detaching in vivo test, as well as to histologically examine the bone-cement interface. Each plate has been implanted into the tibiae of male Japanese white rabbits, taking care to retain the surface properties, and the so-called "failure load has been measured using a detaching test followed 8 weeks after implantation. The failure load for AWC-plates at the uncured surface (2.05 +/- 1.11 kgf, n = 8) was significantly higher than AWC at its cured surface side (0.28 +/- 0.64 kgf, n = 8). The failure load for HAC-plates at the uncured surfaces (1.40 +/- 0.68 kgf, n = 8) was significantly higher than HAC at its cured surface (0.00 +/- 0.00 kgf, n = 8). Failure loads for AWC at its uncured and cured surfaces were both higher than for HAC, although not significantly. Direct bone formation has been observed histologically for both AWC and HAC on the uncured surfaces, and a Ca-P-rich layer was observed only at the uncured surface of AWC. These findings strongly suggest that uncured surfaces are useful for exposing a bioactive filler on a surface of composites, being very effective in inducing bone bonding.