Influence of Ag, Au and Pd noble metals doping on structural, optical and antimicrobial properties of zinc oxide and titanium dioxide nanomaterials

Oxide materials (ZnO, TiO₂) doped with noble metals were synthesized using the combustion technique. The results of the addition of Ag, Au, and Pd up to a concentration of 2 mol% on the structural, optical, morphological and antimicrobial properties was considered. X-ray diffraction experiments revealed that the crystal structure of the host materials remained unaltered despite doping with noble metals. From the scanning electron microscopy results, it was evident that the doped nanoparticles aggregated in clusters of different sizes in the host matrix. The plasmonic effect was also observed in the absorbance spectra of the different doped materials. The obtained materials have shown promising antimicrobial features. All ZnO materials exhibited a high antimicrobial activity, with very low minimum inhibitory concentration values, against the planktonic growth of all tested Gram-positive and Gram-negative bacterial strains. All doped materials exhibited very good anti-biofilm activity, the lowest minimal biofilm eradication concentration values being registered for ZnO doped with Au and Pd toward Escherichia coli and for ZnO doped with Ag against Candida albicans. These results indicate the potential that these materials have for antimicrobial applications in the fields of biomedicine and environmental protection.

Optimized silicon reinforcement of carbon coatings by pulsed laser technique for superior functional biomedical surfaces fabrication

We report on the fabrication of silicon-reinforced carbon (C:Si) structures by combinatorial pulsed laser deposition to search for the best design for a new generation of multi-functional coated implants. The synthesized films were characterized from the morphological, structural, compositional, mechanical and microbiological points of view. Scanning electron microscopy revealed the presence, on top of the deposited layers, of spheroid particulates with sizes in the micron range. No micro-cracks or delaminations were observed. Energy dispersive x-ray spectroscopy and grazing incidence x-ray diffraction pointed to the existence of a C to Si compositional gradient from one end of the film to the other. Raman investigation revealed a relatively high sp³ hybridization of up to 80% at 40-48 mm apart from the edge with higher C content. Si addition was demonstrated to significantly increase C:Si film bonding to the substrate, with values above the ISO threshold for coatings to be used in high-loading biomedical applications. Surface energy studies pointed to an increase in the hydrophilic character of the deposited structures along with Si content up to 52 mN m^-1. In certain cases, the Si-reinforced C coatings elicited an antimicrobial biofilm action. The presence of Si was proven to be benign to HEp-2 cells of human origin, without interfering with their cellular cycle. On this basis, reliable C:Si structures with good adherence to the substrate and high efficiency against microbial biofilms can be developed for implant coatings and other advanced medical devices.

Laser deposition of poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid) - lysozyme microspheres based coatings with anti-microbial properties

The purpose of this study was to obtain, characterize and evaluate the cytotoxicity and antimicrobial activity of coatings based on poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid) - Lysozyme (P(3HB-3HV)/Lys) and P(3HB-3HV) - Polyethylene glycol - Lysozyme (P(3HB-3HV)/PEG/Lys) spheres prepared by Matrix Assisted Pulsed Laser Evaporation (MAPLE) technique, in order to obtain functional and improved Ti-based implants. Morphological investigation of the coatings by Infrared Microscopy (IRM) and SEM revealed that the average diameter of P(3HB-3HV)/Lys spheres is around 2μm and unlike the drop cast samples, IRM recorded on MAPLE films revealed a good distribution of monitored functional groups on the entire scanned surface. The biological evaluation of MAPLE structured surfaces revealed an improved biocompatibility with respect to osteoblasts and endothelial cells as compared with Ti substrates and an enhanced anti-biofilm effect against Gram positive (Staphylococcus aureus) and Gram negative (Pseudomonas aeruginosa) tested strains. Thus, we propose that the fabricated P(3HB-3HV)/PEG/Lys and P(3HB-3HV)/Lys microspheres may be efficiently used as a matrix for controlled local drug delivery, with practical applications in developing improved medical surfaces for the reduction of implant-associated infections.

First report of OXA-72 producing Acinetobacter baumannii in Romania

This is the first report of an OXA-72-producing Acinetobacter baumannii strain in Romania, isolated from chronic leg ulcer samples. Identification of the strain was performed using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. Presence of carbapenem resistance genes was investigated by PCR and sequencing. Our data support the spread of the bla_OXA-72 gene in Eastern Europe.

Combinatorial MAPLE deposition of antimicrobial orthopedic maps fabricated from chitosan and biomimetic apatite powders

Chitosan/biomimetic apatite thin films were grown in mild conditions of temperature and pressure by Combinatorial Matrix-Assisted Pulsed Laser Evaporation on Ti, Si or glass substrates. Compositional gradients were obtained by simultaneous laser vaporization of the two distinct material targets. A KrF* excimer (λ=248nm, τFWHM=25ns) laser source was used in all experiments. The nature and surface composition of deposited materials and the spatial distribution of constituents were studied by SEM, EDS, AFM, GIXRD, FTIR, micro-Raman, and XPS. The antimicrobial efficiency of the chitosan/biomimetic apatite layers against Staphylococcus aureus and Escherichia coli strains was interrogated by viable cell count assay. The obtained thin films were XRD amorphous and exhibited a morphology characteristic to the laser deposited structures composed of nanometric round shaped grains. The surface roughness has progressively increased with chitosan concentration. FTIR, EDS and XPS analyses indicated that the composition of the BmAp-CHT C-MAPLE composite films gradually modified from pure apatite to chitosan. The bioevaluation tests indicated that S. aureus biofilm is more susceptible to the action of chitosan-rich areas of the films, whilst the E. coli biofilm proved more sensible to areas containing less chitosan. The best compromise should therefore go, in our opinion, to zones with intermediate-to-high chitosan concentration which can assure a large spectrum of antimicrobial protection concomitantly with a significant enhancement of osseointegration, favored by the presence of biomimetic hydroxyapatite.

Antimicrobial Activity Evaluation on Silver Doped Hydroxyapatite/Polydimethylsiloxane Composite Layer

The goal of this study was the preparation, physicochemical characterization, and microbiological evaluation of novel hydroxyapatite doped with silver/polydimethylsiloxane (Ag:HAp-PDMS) composite layers. In the first stage, the deposition of polydimethylsiloxane (PDMS) polymer layer on commercially pure Si disks has been produced in atmospheric pressure corona discharges. Finally, the new silver doped hydroxyapatite/polydimethylsiloxane composite layer has been obtained by the thermal evaporation technique. The Ag:HAp-PDMS composite layers were characterized by various techniques, such as Scanning Electron Microscopy (SEM), Glow Discharge Optical Emission Spectroscopy (GDOES), and X-ray photoelectron spectroscopy (XPS). The antimicrobial activity of the Ag:HAp-PDMS composite layer was assessed against Candida albicans ATCC 10231 (ATCC-American Type Culture Collection) by culture based and confirmed by SEM and Confocal Laser Scanning Microscopy (CLSM) methods. This is the first study reporting the antimicrobial effect of the Ag:HAp-PDMS composite layer, which proved to be active against Candida albicans biofilm embedded cells.

Stainless steel surface biofunctionalization with PMMA-bioglass coatings: compositional, electrochemical corrosion studies and microbiological assay

A solution is proposed to surpass the inconvenience caused by the corrosion of stainless steel implants in human body fluids by protection with thin films of bioactive glasses or with composite polymer-bioactive glass nanostructures. Our option was to apply thin film deposition by matrix-assisted pulsed laser evaporation (MAPLE) which, to the difference to other laser or plasma techniques insures the protection of a more delicate material (a polymer in our case) against degradation or irreversible damage. The coatings composition, modification and corrosion resistance were investigated by FTIR and electrochemical techniques, under conditions which simulate their biological interaction with the human body. Mechanical testing demonstrates the adhesion, durability and resistance to fracture of the coatings. The coatings biocompatibility was assessed by in vitro studies and by flow cytometry. Our results support the unrestricted usage of coated stainless steel as a cheap alternative for human implants manufacture. They will be more accessible for lower prices in comparison with the majority present day fabrication of implants using Ti or Ti alloys.

Fabrication of magnetite-based core-shell coated nanoparticles with antibacterial properties

We report the fabrication of biofunctionalized magnetite core/sodium lauryl sulfate shell/antibiotic adsorption-shell nanoparticles assembled thin coatings by matrix assisted pulsed laser evaporation for antibacterial drug-targeted delivery. Magnetite nanoparticles have been synthesized and subsequently characterized by transmission electron microscopy and x-ray diffraction. The obtained thin coatings have been investigated by FTIR and scanning electron microscope, and tested by in vitro biological assays, for their influence on in vitro bacterial biofilm development and cytotoxicity on human epidermoid carcinoma (HEp2) cells.

Structural and biological evaluation of lignin addition to simple and silver-doped hydroxyapatite thin films synthesized by matrix-assisted pulsed laser evaporation

We report on thin film deposition by matrix-assisted pulsed laser evaporation of simple hydroxyapatite (HA) or silver (Ag) doped HA combined with the natural biopolymer organosolv lignin (Lig) (Ag:HA-Lig). Solid cryogenic target of aqueous dispersions of Ag:HA-Lig composite and its counterpart without silver (HA-Lig) were prepared for evaporation using a KrF* excimer laser source. The expulsed material was assembled onto TiO2/Ti substrata or silicon wafers and subjected to physical-chemical investigations. Smooth, uniform films adherent to substratum were observed. The chemical analyses confirmed the presence of the HA components, but also evidenced traces of Ag and Lig. Deposited HA was Ca deficient, which is indicative of a film with increased solubility. Recorded X-ray Diffraction patterns were characteristic for amorphous films. Lig presence in thin films was undoubtedly proved by both X-ray Photoelectron and Fourier Transform Infra-Red Spectroscopy analyses. The microbiological evaluation showed that the newly assembled surfaces exhibited an inhibitory activity both on the initial steps of biofilm forming, and on mature bacterial and fungal biofilm development. The intensity of the anti-biofilm activity was positively influenced by the presence of the Lig and/or Ag, in the case of Staphylococcus aureus, Pseudomonas aeruginosa and Candida famata biofilms. The obtained surfaces exhibited a low cytotoxicity toward human mesenchymal stem cells, being therefore promising candidates for fabricating implantable biomaterials with increased biocompatibility and resistance to microbial colonization and further biofilm development.

Immunomodulatory effect of non-viable components of probiotic culture stimulated with heat-inactivated Escherichia coli and Bacillus cereus on holoxenic mice

Background

Competition of probiotic bacteria with other species from the intestinal microbiota involves different mechanisms that occur regardless of probiotics’ viability. The objective of this paper was to assess the cytokine serum levels in holoxenic mice after oral administration of non-viable components (NVC) of Enterococcus faecium probiotic culture stimulated with heat-inactivated Escherichia coli and Bacillus cereus in comparison to NVC of unstimulated E. faecium probiotic culture.

Methods

Probiotic E. faecium CMGb 16 culture, grown in the presence of heat-inactivated cultures of E. coli and B. cereus CMGB 102, was subsequently separated into supernatant (SN) and heat-inactivated cellular sediment (CS) fractions by centrifugation. Each NVC was orally administered to holoxenic mice (balb C mouse strain), in three doses, given at 24 hours. Blood samples were collected from the retinal artery, at 7, 14, and 21 days after the first administration of the NVC. The serum concentrations of IL-12 and tumor necrosis factor-alpha (TNF-α) interleukins were assessed by ELISA method.

Results

After the oral administration of SN component obtained from the probiotic culture stimulated with heat-inactivated cultures of B. cereus CMGB 102 and E. coli O28, the serum concentrations of IL-12 were maintained higher in the samples collected at 7 and 14 days post-administration. No specific TNF-α profile could be established, depending on stimulated or non-stimulated probiotic culture, NVC fraction, or harvesting time.

Conclusion

The obtained results demonstrate that non-viable fractions of probiotic bacteria, stimulated by other bacterial species, could induce immunostimulatory effects mediated by cytokines and act, therefore, as immunological adjuvants.

Spectrum, antibiotic susceptibility and virulence factors of bacterial infections complicating severe acute pancreatitis

Secondary infection of pancreatic necrotic tissue and peripancreatic fluid is a serious complication of acute pancreatitis resulting in significant morbidity and mortality. The aim of this study was to find out the spectrum of bacterial infections, their antibiotic susceptibility patterns and virulence features in patients with severe acute pancreatitis (SAP). A total of 19 patients with acute pancreatitis were consecutively selected from 153 clinical cases of septic abdominal surgical emergencies (age 29-80, 12 males, 7 females) admitted during 2009-2011, in the First Surgical Clinic of the University Emergency Hospital of Bucharest. All 19 SAP cases were submitted to pre-operatory antibiotic empiric treatment. Ten cases were culture negative, in spite of the positive microscopy registered in eight of them. The rest of nine cases were culture positive, 17 different bacterial strains being isolated and identified as belonging to eight aerobic and four anaerobic species. Polymicrobial infection was seen in six patients and the etiology was dominated by Gram-negative bacilli, followed by gut anaerobic bacteria, attesting their colonic origin. The susceptibility testing of the isolated strains confirmed in vitro in all cases the efficiency of the antibiotics that had been used in the empiric pre-operatory treatment. Out of 19 cases submitted to pre-operatory empiric treatment, 14 proved a favorable evolution and five a lethal outcome. The host depending factors (sepsis and other co-morbidities), as well as the aggressivity of the isolated microbial strains (mediated by the presence of different factors implicated in adherence, toxicity and invasion) were found to contribute to the unfavorable, even lethal clinical outcome of SAP cases. In spite of all theoretical controversies, the antibiotic therapy remains at present a very important therapeutic mean for the SAP treatment; although it cannot solve the septic necrotizing pancreatitis in 100% of cases, however, associated with the surgery and all other medical means of intensive therapy, the antibiotic treatment can influence the clinical evolution to the benefit and recovery of patients in a significant number of cases.

Investigation of the influence of different physico-chemical parameters upon the susceptibility of planktonic and adherent Escherichia coli cells to beta-lactams and quinolones

The purpose of this study was to evaluate the influence of different physico-chemical parameters on Escherichia coli susceptibility to ceftriaxone (CRO), cefotaxime (CTX), imipenem (IMP), and nalidixic acid (as marker for resistance by impermeability). The influence of chemical composition of culture medium was evaluated by the comparative assessment of inhibition growth diameters on different solid media: Mueller Hinton Medium (MH), Plate Count Agar Medium (PCA), MacConkey Medium (MC) and Eosin Methylen Blue Medium (EMB). In order to evaluate the differences in antibiotic susceptibility between the biofilm embedded and planktonic cells, an original, simple experimental model was used, by including the bacterial cells in an agar layer, mimicking the biofilm matrix. Our results demonstrated that the inhibition diameter zone was much larger on PCA, EMB and MC than on MH, considered as general standard medium for the antibiosusceptibility testings (CLSI). When bacterial cells were included in the agar matrix, the growth inhibition diameters obtained for different beta-lactams proved to be different of planktonic cells, i.e.: for CTX, a narrow inhibition diameter was obtained, demonstrating the low efficiency of this antibiotic in the treatment of biofilm associated infections, whereas the CRO proved the same efficiency against planktonic as well as to agar embedded bacteria. The different susceptibility results obtained for the cells embedded in the agar matrix by an adapted disk diffusion method are pleading for the necessity to assess new adapted standard methods and specific parameters in the purpose to determine the antibiotic resistance of bacterial cells isolated from biofilm associated infections.