Efficient femtosecond optical parametric generation in group-velocity-matched MgO:PPLN at 10 MHz

We report on efficient single-pass optical parametric generation (OPG) of broadband femtosecond pulses in the mid-infrared at 10 MHz by exploiting group-velocity-matched interaction in a 42-mm-long MgO:PPLN crystal. Using a microchip-started femtosecond amplified Mamyshev oscillator at 1064 nm as the pump, the OPG source can provide tunable femtosecond pulses across 1516-1566 nm in the signal and 3318-3568 nm in the idler, with slope efficiencies of ∼93% and ∼41%, respectively. For 650 mW of average input pump power, signal powers of up to 283 mW at 1524 nm are generated, with more than 200 mW over the entire tuning range. Idler average powers of up to 104 mW at 3450 nm, with more than 80 mW across the full range, are also obtained. For input pump pulses of ∼182 fs, the generated signal pulses have a duration of ∼460 fs at 1516 nm. The idler pulses have a typical bandwidth of ≥100 nm over the entire tuning range, and as wide as 181 nm at 3457 nm. The OPG source exhibits excellent passive power stability, better than 0.5% rms in the signal and 0.6% rms in the idler, over 1 h, both in Gaussian TEM00 spatial profile with M2 < 1.5.

Up-converted photorefractive optical transient detection with femtosecond laser pulses

We report on experimental demonstration of optical transient detection (OTD) based on photorefractive two-wave mixing of femtosecond pulses. The demonstrated technique also combines nonlinear-crystal-based OTD with up-conversion from infrared into the visible range. The approach enables measurement of phase changes of a dynamic signal in the infrared using GaP- or Si-based detectors while suppressing stationary background. Experimental results reveal existence of the relation between input phases in the infrared and output phases in the visible wavelength range. We further present experimental evidence of additional merits of up-converted transient phase analysis under noisy conditions, such as residual continuous-wave emission affecting the ultrashort pulses from the laser.

Yb-fiber-pumped high-average-power picosecond optical parametric oscillator tunable across 1.3-1.5 μm

We report the generation of high-repetition-rate picosecond pulses in the 1.3-1.5 µm spectral range by internal second harmonic generation (SHG) of an idler-resonant optical parametric oscillator (OPO) based on MgO-doped periodically-poled LiNbO₃ (MgO:PPLN), synchronously pumped by ∼20 ps pulses at 80 MHz using an Yb-fiber laser at 1.064 µm. By taking advantage of the high spatial quality of the resonant idler beam in the 2503-3030 nm wavelength range and using a second MgO:PPLN crystal with fanout grating structure for intracavity SHG, we have achieved spectral coverage across 1272-1515 nm with up to 1.23 W average power. The second harmonic output exhibits a power stability of 3% rms over 1 hour in pulses of 8.3 ps with Gaussian beam profile. The described approach overcomes the spectral limitation of 1.064 µm-pumped OPOs based on MgO:PPLN and other oxide-based nonlinear crystals, where signal generation below ∼1.45 µm is precluded by multi-phonon absorption of idler radiation above ∼4 µm.

Tunable, high-power, high-order optical vortex beam generation in the mid-infrared

We report the generation of tunable high-order optical vortices in the mid-infrared (mid-IR) using a picosecond optical parametric oscillator (OPO). The OPO is based on MgO:PPLN as the nonlinear gain medium and synchronously pumped by a mode-locked Yb-fiber laser at 1064 nm. Using a singly-resonant oscillator configuration for the OPO, we have achieved direct transfer of pump optical vortices to the non-resonant idler beam, with the resonant signal in the Gaussian cavity mode. We demonstrate the successful transfer of pump optical vortices of order, l_p= 1 to 5, to the idler beam of the same order across the mid-IR, with an output power of 630 mW to 130 mW across 2538 nm to 4035 nm for the highest idler vortex order, l_i= 5. To the best of our knowledge, this is the first report of an OPO pumped by a vortex beam of order as high as l_p= 5 and generating idler vortices of high order in the mid-IR.

Broadly tunable, intracavity injection-seeded, hybrid optical parametric oscillator

We report a novel, to the best of our knowledge, approach for injection seeding of pulsed optical parametric oscillators (OPOs), which can provide spectral control over the full tuning range. Bandwidth reduction down to single-mode operation is realized across the pulsed tuning range by deploying a hybrid design, where a continuous-wave (cw) OPO injection seeds the pulsed OPO in a single composite cavity. By exploiting two identical MgO-doped periodically poled lithium niobate crystals, the hybrid OPO provides signal pulses with a single-frequency linewidth as narrow as 7.2 MHz across 1510-1677 nm. The effect of cw injection seeding on pulsed OPO operation is also confirmed by reduced rise time, increased pump depletion, major reduction in threshold, and substantial enhancement in output power and extraction efficiency.

Tunable vortex beam generation using an optical parametric oscillator with an antiresonant-ring interferometer

We report a high-average-power picosecond optical vortex source tunable in the near-infrared, using an antiresonant-ring (ARR) interferometer internal to an optical parametric oscillator (OPO) in combination with an external cylindrical lens for astigmatic mode conversion. The ARR OPO is tunable in the signal across 1457-1647 nm with a vortex intensity profile and up to 1 W of average power at 1602 nm. The corresponding idler is tunable over 3006-3945 nm in a Gaussian intensity profile with as much as 1.6 W at 3168 nm. The vortex signal and the Gaussian idler exhibit passive power stability better than 1.7% rms and 1.3% rms, respectively, over >1h. The signal pulses have a Gaussian duration of <19ps with a time-bandwidth product of ΔτΔν<3.6 across the tuning range.

Green-pumped continuous-wave parametric oscillator based on fanout-grating MgO:PPLN: publisher's note

This publisher's note contains corrections to Opt. Lett.45, 6486 (2020)OPLEDP0146-959210.1364/OL.404979.

Performance studies of high-average-power picosecond optical parametric generation and amplification in MgO:PPLN at 80 MHz

We report on performance studies of high-average-power single-pass picosecond optical parametric generation (OPG) and amplification (OPA) tunable near 2 µm in MgO:PPLN pumped by an Yb-fiber laser at 1.064 µm and 80 MHz pulse repetition rate. The simple setup based on two identical crystals, and without the need for an intermediate delay line for synchronization, delivers up to 6.3 W of average power at an overall conversion efficiency of ∼50% and is tunable across 1902-2415 nm. We present systematic characterization of OPG and OPA stages to compare their performance and investigate the effect of parametric generation in the high-gain limit, enabling high output power and full-width-half-maximum (FWHM) spectral bandwidths as large as 189 nm. The OPG-OPA output exhibits excellent passive power stability better than 0.3% rms and central wavelength stability better than 0.03% rms over 1 hour, in high spatial beam quality with M2<2. The OPG output pulses have duration of 5.2 ps with a FWHM spectral bandwidth of 117 nm at 2123 nm, resulting in a time-bandwidth product of ΔτΔν∼40, indicating ∼4 times temporal compression compared to the input pump pulses. Theoretical simulations confirm the effect of pump beam divergence on the observed shift in wavelength tuning with respect to temperature, while the exponential gain in the parametric process is identified as playing a key role in the resulting pulse compression.

Green-pumped continuous-wave parametric oscillator based on fanout-grating MgO:PPLN

We report the first green-pumped continuous-wave (cw) optical parametric oscillator (OPO) based on MgO:PPLN in a fanout grating design. Pumped by a single-frequency cw laser at 532 nm, the OPO provides tunable radiation across 813-1032 nm in the signal and 1098-1539 nm in the idler by simple mechanical translation at a fixed temperature of 55°C. By deploying a 25-mm-long crystal to minimize thermal effects and using output coupling for the signal wave, we generate a total output power of up to 714 mW at 30% extraction efficiency in excellent Gaussian beam quality with M²<1.1 and high output stability. Simultaneous measurements of signal and idler power result in passive stability of 2.8% and 1.8% rms, respectively, over 1 h. Strong thermal effects contribute to the high stability and excellent beam quality, while linear and green-induced infrared absorption limit the power scaling capabilities of the OPO. The output signal is single-mode with an instantaneous linewidth of ∼3MHz and frequency stability of ∼84MHz over 72 s.

Fiber-laser-pumped high-repetition-rate picosecond optical parametric generation and amplification in MgO:PPLN

We report the generation of tunable high-repetition-rate picosecond pulses in the near-infrared at high average power with record conversion efficiency using single-pass optical parametric generation (OPG) and amplification (OPA) in MgO:PPLN, for the first time, to the best of our knowledge. By deploying a mode-locked Yb-fiber laser at 1064 nm providing 21 ps pump pulses at 80 MHz, and a cascade of two 50-mm-long MgO:PPLN crystals, we generate up to 8.3 W of total average output power at a conversion efficiency of 59% over a tunable range of 513 nm, across 1902-2415 nm, with a record threshold as low as 600 mW (7.5 nJ). The two-stage OPG-OPA scheme provides control over fine wavelength tuning and output spectral bandwidths, enabled by the independent control of phase-matching in each crystal. The OPG-OPA output exhibits high spatial beam quality and excellent passive power and central wavelength stability better than 0.9% rms and 0.1% rms, respectively, over 1 hour. The output pulses have a duration of ∼11ps, with a 10 dB bandwidth of ∼350nm at 2107 nm.

Multi-structured-beam optical parametric oscillator

Structured beams, conventionally generated through the spatial mode conversion of the Gaussian laser beams, have attracted great interest in recent years. Optical parametric oscillators (OPOs) have demonstrated the potential for the generation of tunable structured beams directly from an input pump source. However, to date, a particular OPO design has been shown to produce such beams only in a specific configuration and different spatial structured beams require different system architectures. Here, we report the generation of multiple-structured beams from a single OPO device. Using a vortex-beam-pumped ultrafast OPO in singly-resonant oscillator design and through the control of the mode structure of the resonant beam using a simple intracavity aperture, we generate vortex, Airy, vortex Airy, and Gaussian signal beams over a tunable wavelength range across 1457-1680 nm, simultaneous with vortex beam in the non-resonant idler across 2902-3945 nm, from different ports of the device. The signal and idler vortices have output power in excess of 1 W and maximum vortex order of l_i=2, while the Airy beam and vortex Airy beam have output power of more than 200 mW. The generic experimental design can be used to provide multi-structured spatial beams with broad tunability across different spectral regions by proper selection of pump laser and nonlinear material and in all times-scales from continuous-wave to ultrafast femtosecond domain.

Phase-locked picosecond optical parametric oscillator

We report a degenerate self-phase-locked picosecond optical parametric oscillator (OPO) synchronously pumped by a mode-locked Yb-fiber laser at 1064 nm, delivering broadband output near 2 µm with 2.8 W of average power at ∼80MHz repetition rate. By exploiting a 50-mm-long MgO:PPLN crystal providing high gain and low group velocity dispersion under type-0 (e→ee) phase matching, the OPO generates a phase-locked degenerate output spectrum with a bandwidth of ∼202nm centered at 2128 nm in pulses of ∼21ps duration with excellent passive long-term power and spectral stability in high spatial beam quality. Phase-locked operation results in spectral and power stabilization at exact degeneracy and is further validated by f-2f interferometry and radio frequency measurements of OPO output. To the best of our knowledge, this is the first degenerate self-phase-locked OPO in picosecond time scale, and the highest average power reported for a phase-locked ultrafast OPO to date.

Green-pumped optical parametric oscillator based on fan-out grating periodically-poled MgO-doped congruent LiTaO3

We report a green-pumped optical parametric oscillator (OPO) based on periodically poled MgO-doped congruent lithium tantalate (MgO:cPPLT). Pumped at 532 nm by a frequency-doubled Q-switched Nd:YAG laser, and using a fan-out grating structure, the singly-resonant OPO provides continuous tuning across 689-1025 nm in the signal and 1106-2336 nm in the idler at room temperature by simple mechanical translation of the crystal. The tuning range can be further extended to 677 nm and 2479 nm in the signal and idler, respectively, by temperature tuning the crystal to 200°C. With a 29-mm-long crystal, the OPO generates 131 mW of average idler power at 1476.5 nm for an input pump power of 1.8 W at 25 kHz repetition rate, with a slope efficiency of 11.3%. Bulk damage in the MgO:cPPLT crystal has been observed for pump powers above ∼1.8  W, and at pump powers beyond ∼1.4  W under long-term operation. The passive power stability of the generated idler is 3.9% over 30 min, in a Gaussian spatial profile.

Tunable ultraviolet vortex source based on a continuous-wave optical parametric oscillator

We report a continuous-wave (cw) optical parametric oscillator (OPO) generating optical vortices tunable in the ultraviolet (UV). Based on MgO:sPPLT as the nonlinear crystal, the singly resonant OPO is pumped by a cw vortex beam in the green, and deploying intracavity sum-frequency generation (SFG) between the undepleted pump and the Gaussian resonant signal in the crystal of BiB₃O₆, it can generate optical vortices of order, l_uv=1 and 2, tunable across 332-344 nm in the UV with a maximum power of 12 mW. Due to conservation of orbital angular momentum in the parametric process, the OPO also produces a non-resonant idler output beam in a vortex spatial profile of order l_i=1 and 2, identical to the pump vortex, with the signal beam in Gaussian distribution. The idler vortex is tunable across 1172-1338 nm with maximum output power of 1.3 W.

Femtosecond optical parametric oscillator continuously tunable across 3.6-8 μm based on orientation-patterned gallium phosphide

We report a synchronously-pumped femtosecond optical parametric oscillator (OPO) based on orientation-patterned gallium phosphide (OP-GaP), providing continuously tunable mid-infrared (mid-IR) idler radiation across 3570-7892 nm (2801-1267  cm^-1), by exploiting pump wavelength tuning. We generate up to 54 mW of output average power at 80 MHz, and quantum conversion efficiencies up to 28.9% are achieved by use of synchronized pump retroreflection. With the inclusion of intracavity dispersion compensation in an OP-GaP OPO, near-transform-limited signal pulse durations of 112 fs at 1288 nm are measured, and peak powers up to 3 kW in the mid-IR are inferred. Finally, evidence of three-photon absorption is observed and characterized near the pump wavelength.

Yb-fiber-pumped, high-beam-quality, idler-resonant mid-infrared picosecond optical parametric oscillator

We report an Yb-fiber-pumped picosecond optical parametric oscillator (OPO) delivering high average power in excellent beam quality throughout the mid-infrared (mid-IR). Using MgO:PPLN as the nonlinear crystal and configured as a singly-resonant oscillator in the mid-IR idler wave, the OPO provides up to 3.5 W average power in high spatial quality with M2<1.8 across a continuous tuning range of 4028-2198 nm, with M²<1.5 at 4000 nm. It can also deliver as much as 4.3 W of signal power in an output beam with M2<1.4 across 1446-2062 nm. The extracted idler exhibits a passive power stability better than 0.46% rms over 1 hour across the entire mid-IR tuning range. We have also investigated OPO cavity length detuning behavior about the zero-group-velocity-mismatch crossing point and its effects on output power.

Widely tunable room-temperature continuous-wave optical parametric oscillator based on periodically-poled KTiOPO4

We report the first realization of widely tunable continuous-wave (cw) optical parametric oscillator (OPO) based on periodically-poled KTiOPO₄ (PPKTP) at room temperature. By exploiting fan-out grating design in a 30-mm PPKTP crystal, and configured in an output-coupled singly-resonant oscillator (OC-SRO) configuration pumped at 532 nm in the green, the OPO provides finely tunable radiation across 741-922 nm in the signal and 1258-1884 nm in the idler, at a fixed temperature of 25 °C. The use of output coupling for the signal wave enables enhancement of OPO extraction efficiency to 30%, providing a maximum total output power of 1.65 W (450 mW of signal at 901 nm and 1.2 W of idler at 1299 nm) for 5.5 W of pump power. The output idler exhibits passive power stability better than 3.2% rms over >2 mins, and the extracted signal exhibits frequency stability of 194 MHz over more than 35 seconds, in excellent beam quality. The OPO performance in pure SRO configuration has also been investigated.

SHG (532 nm)-induced spontaneous parametric downconversion noise in 1064-nm-pumped IR upconversion detectors

As a novel technique for infrared detection, frequency upconversion has been successfully deployed in many applications. However, investigations into the noise properties of upconversion detectors (UCDs) have also received considerable attention. In this Letter, to the best of our knowledge, we present a new noise source-second-harmonic generation (SHG)-induced spontaneous parametric downconversion-experimentally and theoretically shown to exist in short-wavelength-pumped UCDs. We investigate the noise properties of two UCDs based on single-pass 1064-nm-pumped periodically poled LiNbO₃ bulk crystals. One UCD is designed to detect signals in the telecom band and the other in the mid-infrared regime. Our experimental demonstration and theoretical analysis reveal the basic properties of this newly discovered UCD noise source, including its dependence on crystal temperature and pump power. Furthermore, the principle behind the generation of this noise source can also be applied to other UCDs, which utilize nonlinear crystals either in waveguide form or with different bulk materials. This study may also aid in developing methods to suppress the newly identified noise in future UCD designs.

Orbital angular momentum exchange in a picosecond optical parametric oscillator

We report on the orbital angular momentum (OAM) exchange among the interacting beams in an ultrafast optical parametric oscillator (OPO). The singly-resonant OPO is synchronously pumped by a picosecond vortex beam from a frequency-doubled Yb-fiber laser at 532 nm in the green. We demonstrate successful transfer of the pump OAM mode to the non-resonant idler beam tunable across 1109-1209 nm, with OAM as high as l_p=3. Controlling the cavity loss and spatial overlap between the resonant signal and the pump beam in the nonlinear crystal, we have generated signal and idler OAM mode combinations, (l_s,l_i) of (0,2) and (1,1), and (0,3) and (1,2) for pump OAM mode l_p=2 and 3, respectively. Using a pump power of 1 W, we have generated idler OAM mode of orders, l_i=1, 2, and 3, with maximum output powers of 202, 113, and 57 mW, respectively. To the best of our knowledge, this is the first report on controlled generation of OAM modes from an ultrafast OPO.

Singly-resonant pulsed optical parametric oscillator based on orientation-patterned gallium phosphide

We report a pulsed singly-resonant optical parametric oscillator (OPO) based on the new nonlinear crystal, orientation-patterned gallium phosphide (OP-GaP). Pumped by a Q-switched Nd:YAG laser at 1064 nm, and using a 40-mm-long OP-GaP crystal with a single grating period of Λ=16  μm, the OPO generates signal and idler output across 1.6-1.7 μm and 2.8-3.1 μm, respectively, under temperature tuning. For an average pump power of 4.8 W at 50 kHz pulse repetition rate, mid-infrared idler powers of up to ∼20  mW have been obtained at 2966 nm with high output stability. For pump pulses of ∼13  ns duration, the OPO generates ∼6  ns output signal pulses. From temperature-dependent wavelength tuning measurements at two different pump powers of 4.2 W and 1.2 W, a discrepancy of 11-17°C in the internal crystal temperature is estimated, implying that the OP-GaP sample suffers from increasing thermal effects at higher pump powers due to absorption.

Multimilliwatt, tunable, continuous-wave, mid-infrared generation across 4.6-4.7 μm based on orientation-patterned gallium phosphide

We report the generation of tunable continuous-wave (cw) mid-infrared (mid-IR) radiation across 4608-4694 nm using the new nonlinear material, orientation-patterned gallium phosphide (OP-GaP). By exploiting difference-frequency mixing between a cw Tm-fiber laser and a home-built cw optical parametric oscillator in a 40-mm-long crystal, we have generated up to 43 mW of cw output power, with >30  mW across >95% of the mid-IR tuning range. The output at 4608 nm exhibits high beam quality with a passive power stability of 2.5% rms over 1.5 min. The temperature acceptance bandwidth of the OP-GaP crystal has been measured and compared with theory. The performance of the mid-IR source at high pump powers and polarization-dependent transmission in OP-GaP has been investigated.

Critically phase-matched Ti:sapphire-laser-pumped deep-infrared femtosecond optical parametric oscillator based on CdSiP2

We report a high-repetition-rate femtosecond optical parametric oscillator (OPO) for the deep-infrared (deep-IR) based on type-I critical phase-matching in CdSiP₂ (CSP), pumped directly by a Ti:sapphire laser. Using angle-tuning in the CSP crystal, the OPO can be continuously tuned across 7306-8329 nm (1201-1369  cm^-1) in the deep-IR. It delivers up to 18 mW of idler average power at 7306 nm and >7  mW beyond 8000 nm at 80.5 MHz repetition rate, with the spectra exhibiting bandwidths of >150  nm across the tuning range. Moreover, the signal is tunable across 1128-1150 nm in the near-infrared, providing up to 35 mW of average power in ∼266  fs pulses at 1150 nm. Both beams exhibit single-peak Gaussian distribution in TEM₀₀ spatial profile. With an equivalent spectral brightness of ∼5.6×10²⁰photons s^-1 mm^-2 sr^-10.1% BW^-1, this OPO represents a viable alternative to synchrotron and supercontinuum sources for deep-IR applications in spectroscopy, metrology, and medical diagnostics.

Optical parametric generation in orientation-patterned gallium phosphide

We report an optical parametric generator (OPG) based on the new nonlinear material, orientation-patterned gallium phosphide (OP-GaP). Pumped by a Q-switched nanosecond Nd:YAG laser at 1064 nm with 25 kHz pulse repetition rate, the OPG can be tuned across 1721-1850 nm in the signal and 2504-2787 nm in the idler. Using a 40-mm-long crystal in single-pass configuration, we have generated a total average output power of up to ∼18  mW, with ∼5  mW of idler power at 2670 nm, for 2 W of input pump power. The OPG exhibits a passive stability in total output power better than 0.87% rms over 1 h, at a crystal temperature of 120°C, compared to 0.14% rms for the input pump. The output signal pulses, recorded at 1769 nm, have duration of 5.9 ns for input pump pulses of 9 ns. Temperature-dependent loss measurements for the pump polarization along the [100] axis in the OP-GaP crystal have also been performed, for the first time, indicating a drop in transmission from 28.8% at 50°C to 19.4% at 160°C.

High-repetition-rate, deep-infrared, picosecond optical parametric oscillator based on CdSiP2

We report a high-repetition-rate picosecond optical parametric oscillator (OPO) based on CdSiP₂ (CSP) that is synchronously pumped by an Yb-fiber laser at 1064 nm and provides high average power in the deep-infrared (deep-IR) at 79.5 MHz. The OPO is tunable across 6205-6710 nm in the idler, providing as much as 105 mW of average power at 6205 nm and >55  mW over nearly the entire tuning range. The deep-IR idler output exhibits passive power stability better than 2.3% rms over 12 h in good beam quality. The near-IR signal pulses from the OPO have a Gaussian pulse duration of ∼19  ps, measured at 1284 nm. We have investigated the temperature tuning characteristics of the OPO and compared the data with the theoretical calculations using the most recent Sellmeier equations and thermo-optic coefficients for the crystal. To the best of our knowledge, this is the first picosecond OPO based on CSP operating at MHz repetition rates.

Picosecond difference-frequency-generation in orientation-patterned gallium phosphide

We report the generation of tunable high-repetition-rate picosecond radiation in the mid-infrared using the new quasi-phase-matched nonlinear material of orientation-patterned gallium phosphide (OP-GaP). The source is realized by single-pass difference-frequency-generation (DFG) between the output signal of a picosecond optical parametric oscillator (OPO) tunable across 1609-1637 nm with input pump pulses at 1064 nm in OP-GaP, resulting in tunable radiation across 3040-3132 nm. Using a 40-mm-long crystal, we have generated up to 57 mW of DFG average power at ~80 MHz repetition rate for a pump power of 5 W and signal power of 0.9 W, with >30 mW over >50% of the tuning range. The DFG source exhibits a passive power stability better than 3.2% rms over 1 hour in good spatial beam quality. To the best of our knowledge, this is the first picosecond frequency conversion source based on OP-GaP.

Room-temperature, rapidly tunable, green-pumped continuous-wave optical parametric oscillator

We report a high-power, single-frequency, green-pumped continuous-wave optical parametric oscillator (OPO) capable of providing rapid and continuous tuning across a wide spectral range in the near-infrared at room temperature. By exploiting the nonlinear crystal of MgO:sPPLT in a fan-out grating design pumped at 532 nm in the green, the OPO can be tuned continuously across 1097-2100 nm in the idler, with corresponding signal tuning over 712-1033 nm using simple mechanical translation of the crystal at fixed temperature. The device can deliver hundreds of milliwatts of idler power across the complete tuning range, with as much as 2.2 W at 1097 nm for 9 W of input pump power at 77% pump depletion. The passive power stability of the generated idler at 1110 nm, measured at 6.8 W of pump power, is better than 1% rms over 30 min. The signal frequency stability, measured at 837 nm, is 518 MHz over 2 min, with an instantaneous linewidth of 6.9 MHz, in high beam quality.

Nanosecond difference-frequency generation in orientation-patterned gallium phosphide

We report a tunable, single-pass, pulsed nanosecond difference-frequency generation (DFG) source based on the new semiconductor nonlinear material, orientation-patterned gallium phosphide (OP-GaP). The DFG source is realized by mixing the output signal of a nanosecond OPO tunable over 1723-1827 nm with the input pump pulses of the same OPO at 1064 nm in an OP-GaP crystal, resulting in tunable generation over 233 nm in the mid-infrared from 2548 to 2781 nm. Using a 40-mm-long crystal, we have produced ∼14  mW of average DFG output power at 2719 nm for a pump power of 5 W and signal power of 1 W at 80 kHz repetition rate. To the best of our knowledge, this is the first single-pass nanosecond DFG source based on OP-GaP. The DFG output beam has a TEM₀₀ spatial mode profile and exhibits passive power stability better than 1.7% rms over 1.4 h at 2774 nm, compared to 1.6% and 0.1% rms for the signal and pump, respectively. The OP-GaP crystal is recorded to have a temperature acceptance bandwidth of 17.7°C.

Fiber-laser-based, high-repetition-rate, picosecond ultraviolet source tunable across 329-348 nm

We report a compact, fiber-laser-based, high-repetition-rate picosecond source for the ultraviolet (UV), providing multi-tens of milliwatt of average power across 329-348 nm. The source is based on internal sum-frequency-generation (SFG) in a singly resonant optical parametric oscillator (OPO), synchronously pumped at 532 nm by the second harmonic of a picosecond Yb-fiber laser at 80 MHz repetition rate. Using a 30-mm-long single-grating MgO:sPPLT crystal for the OPO and a 5-mm-long BiB₃O₆ crystal for intracavity SFG, we generate up to 115 mW of average UV power at 339.9 nm, with >50  mW over 73% of the tuning range, for 1.6 W of input pump power. The UV output exhibits a passive rms power stability of ∼2.9% rms over 1 min and 6.5% rms over 2 h in high beam quality. Angular acceptance bandwidth and cavity detuning effects have also been studied.

Ultrafast Airy beam optical parametric oscillator

We report on the first realization of an ultrafast Airy beam optical parametric oscillator (OPO). By introducing intracavity cubic phase modulation to the resonant Gaussian signal in a synchronously-pumped singly-resonant OPO cavity and its subsequent Fourier transformation, we have generated 2-dimensional Airy beam in the output signal across a 250 nm tuning range in the near-infrared. The generated Airy beam can be tuned continuously from 1477 to 1727 nm, providing an average power of as much as 306 mW at 1632 nm in pulses of ~23 ps duration with a spectral bandwidth of 1.7 nm.

Pump-tuned deep-infrared femtosecond optical parametric oscillator across 6-7 μm based on CdSiP2

We report on a high-power femtosecond optical parametric oscillator (OPO) at 80 MHz repetition rate, tunable across 6318-7061 nm in the deep-infrared (deep-IR) using pump wavelength tuning. The OPO, based on CdSiP₂ (CSP), is synchronously pumped by a commercial Ti:sapphire-pumped femtosecond OPO in the near-IR, enabling rapid static tuning of the CSP OPO with minimal adjustments to its cavity length. The deep-IR CSP OPO provides as much as 32 mW of average idler power at 6808 nm with spectral bandwidth >1000  nm (at -10  dB level) across the tuning range. By implementing intracavity dispersion control, near-transform-limited signal pulses of ∼100  fs duration with smooth single-peak spectrum are achieved at 1264 nm, corresponding to an idler wavelength at 6440 nm. To the best of our knowledge, this is the first time such practical idler powers in the deep-IR have been generated from a dispersion-compensated CSP femtosecond OPO at sub-100 MHz repetition rate.

Ultrafast optical vortex beam generation in the ultraviolet

We report on the generation of ultrafast vortex beams in the deep ultraviolet (DUV) wavelength range at 266 nm, for the first time to our knowledge. Using a Yb-fiber-based green source in combination with two spiral phase plates of orders 1 and 2, we were able to generate picosecond Laguerre-Gaussian (LG) beams at 532 nm. Subsequently, these LG beams were frequency doubled by single-pass, second-harmonic generation in a 10 mm-long β-BaB₂O₄ crystal to generate ultrafast vortex beams at 266 nm with a vortex order as high as 12, providing up to 383 mW of DUV power at a single-pass, green-to-DUV conversion efficiency of 5.2%. The generated picosecond UV vortex beam has a spectral width of 1.02 nm with a passive power stability better than 1.2% rms over >1.5  h.

Continuous-wave, single-pass, single-frequency second-harmonic-generation at 266 nm based on birefringent-multicrystal scheme

We report the implementation of a compact cascaded multicrystal scheme based on birefringent crystals in critical phase-matching, for the generation of continuous-wave (cw) radiation in the deep ultraviolet (UV). The approach comprises a cascade of 4 single-pass second-harmonic-generation (SHG) stages in β-BaB₂O₄ (BBO) pumped by a single-frequency cw green source at 532 nm. A deep-UV cw output power of 37.7 mW at 266 nm has been obtained with a high passive power stability of 0.12% rms over more than 4 hours. Characterization and optimization of the system in each stage has been systematically performed. Angular phase-matching acceptance bandwidth under tight focusing in BBO, and spectral properties of the deep-UV radiation, have been studied. Theoretical calculations for SHG in the cascaded scheme based on birefringent phase-matching have been performed, and enhancement in UV power compared to single-stage single-pass scheme are studied. Theoretical comparison of BBO with other potential crystals for deep-UV generation in cascaded multicrystal scheme is also presented.

Ti:sapphire-pumped deep-infrared femtosecond optical parametric oscillator based on CdSiP2

We report on a femtosecond optical parametric oscillator (OPO) for the deep-infrared (deep-IR) based on the Kerr-lens-mode-locked Ti:sapphire laser as the pump source. By deploying a novel cascaded intracavity arrangement, comprising a femtosecond OPO based on the nonlinear crystal, CdSiP2, synchronously pumped internal to a MgO:PPLN femtosecond OPO, we have generated broadly tunable radiation across 5958-8117 nm using rapid static cavity delay tuning, with a maximum power of 64 μW at 6791 nm, limited by the absorption in mirror substrates as well as polarization-dependent intracavity losses. The deep-IR idler power exhibits excellent passive stability of better than 1.1% rms over 2 h, with a spectral bandwidth as large as ∼650 nm at ∼6800 nm. The demonstrated concept is generic and can be similarly deployed in other operating time scales and wavelength regions, also using different laser pump sources and nonlinear materials.

Fiber-laser-based, green-pumped, picosecond optical parametric oscillator using fan-out grating PPKTP

We report a stable, Yb-fiber-laser-based, green-pumped, picosecond optical parametric oscillator (OPO) for the near-infrared based on periodically poled potassium titanyl phosphate (PPKTP) nonlinear crystal, using fan-out grating design and operating near room temperature. The OPO is continuously tunable across 726-955 nm in the signal and 1201-1998 nm in the idler, resulting in a total signal plus idler wavelength coverage of 1026 nm by grating tuning at a fixed temperature. The device generates up to 580 mW of average power in the signal at 765 nm and 300 mW in the idler at 1338 nm, with an overall extraction efficiency of up to 52% and a pump depletion >76%. The extracted signal at 765 nm and idler at 1746 nm exhibit excellent passive power stability better than 0.5% and 0.8% rms, respectively, over 1 h with good beam quality in TEM₀₀ mode profile. The output signal pulses have a Gaussian temporal duration of 13.2 ps, with a FWHM spectral bandwidth of 3.4 nm at 79.5 MHz repetition rate. Power scaling limitations of the OPO due to the material properties of PPKTP are studied.

High-power, high-repetition-rate performance characteristics of β-BaB₂O₄ for single-pass picosecond ultraviolet generation at 266 nm

We report a systematic study on the performance characteristics of a high-power, high-repetition-rate, picosecond ultraviolet (UV) source at 266 nm based on β-BaB2O4 (BBO). The source, based on single-pass fourth harmonic generation (FHG) of a compact Yb-fiber laser in a two-crystal spatial walk-off compensation scheme, generates up to 2.9 W of average power at 266 nm at a pulse repetition rate of ~80 MHz with a single-pass FHG efficiency of 35% from the green to UV. Detrimental issues such as thermal effects have been studied and confirmed by performing relevant measurements. Angular and temperature acceptance bandwidths in BBO for FHG to 266 nm are experimentally determined, indicating that the effective interaction length is limited by spatial walk-off and thermal gradients under high-power operation. The origin of dynamic color center formation due to two-photon absorption in BBO is investigated by measurements of intensity-dependent transmission at 266 nm. Using a suitable theoretical model, two-photon absorption coefficients as well as the color center densities have been estimated at different temperatures. The measurements show that the two-photon absorption coefficient in BBO at 266 nm is ~3.5 times lower at 200°C compared to that at room temperature. The long-term power stability as well as beam pointing stability is analyzed at different output power levels and focusing conditions. Using cylindrical optics, we have circularized the generated elliptic UV beam to a circularity of >90%. To our knowledge, this is the first time such high average powers and temperature-dependent two-photon absorption measurements at 266 nm are reported at repetition rates as high as ~80 MHz.

High-power, widely tunable, room-temperature picosecond optical parametric oscillator based on cylindrical 5%MgO:PPLN

We report a high-power picosecond optical parametric oscillator (OPO) based on cylindrical MgO:PPLN synchronously pumped by an Yb-fiber laser. The singly resonant OPO is tunable in the near-infrared signal across 1413-1900 nm and mid-infrared idler over 2418-4307 nm by angle tuning of the crystal at room temperature. With non-optimized output coupling of ∼10%, the OPO simultaneously delivers 2.4 W of signal at 1664 nm and 1.7 W of idler at 2950 nm at an overall extraction efficiency of ∼45% with high beam-pointing stability <30  μrad and <14  μrad for the signal and idler, respectively. The generated signal and idler exhibit passive power stability better than 1% rms and 0.8% rms over 15 h, respectively, in high beam quality with TEM(00) profile. The extracted signal pulses from the OPO have duration of 15.2 ps with a spectral bandwidth of 0.7 nm, corresponding to a time-bandwidth product of ΔυΔτ∼1.2.

Yb-fiber-laser-based, 1.8 W average power, picosecond ultraviolet source at 266 nm

We report a compact, stable, high-power, picosecond ultraviolet (UV) source at 266 nm based on simple single-pass two-step fourth-harmonic generation (FHG) of a mode-locked Yb-fiber laser at 79.5 MHz in LiB3O5 (LBO) and β-BaB2O4. Using a 30-mm-long LBO crystal for single-pass second-harmonic generation, we achieve up to 9.1 W of average green power at 532 nm for 16.8 W of Yb-fiber power at a conversion efficiency of 54% in 16.2 ps pulses with a TEM00 spatial profile and passive power stability better than 0.5% rms over 16 h. The generated green radiation is then used for single-pass FHG into the UV, providing as much as 1.8 W of average power at 266 nm under the optimum focusing condition in the presence of spatial walk-off, at an overall FHG conversion efficiency of ∼11%. The generated UV output exhibits passive power stability better than 4.6% rms over 1.5 h and beam pointing stability better than 84 μrad over 1 h. The UV output beam has a circularity of >80% in high beam quality with the TEM00 mode profile. To the best of our knowledge, this is the first report of picosecond UV generation at 266 nm at megahertz repetition rates.

High-power femtosecond mid-infrared optical parametric oscillator at 7 μm based on CdSiP(2)

We report a femtosecond optical parametric oscillator (OPO) for the mid-infrared (mid-IR), generating a record average power of 110 mW at 7 μm. The OPO, based on CdSiP(2) (CSP) as the nonlinear crystal, provides idler wavelength tuning across 6540-7186 nm with spectral bandwidths >400  nm at -10  dB level over the entire range, and a maximum bandwidth of 478 nm at 6.9 μm. To the best of our knowledge, this is the highest average power generated from a femtosecond OPO in the deep mid-IR. The OPO also provides near-IR signal wavelengths tunable across 1204-1212 nm with a usable power of 450 mW in 418-fs pulses at 1207 nm. The simultaneously measured signal and idler power exhibit a passive stability better than 1.6% rms and 3% rms, respectively. A mid-IR idler spectral stability with a standard deviation of the frequency fluctuations better than 40 MHz over 15 min, limited by the measurement resolution, is realized. Using the mid-IR idler from the CSP OPO, we perform Fourier-transform spectroscopy to detect liquid phase organic solvent, toluene (C(7)H(8)), in the molecular fingerprint region.

Two-crystal, synchronously pumped, femtosecond optical parametric oscillator

We demonstrate a femtosecond optical parametric oscillator based on two nonlinear crystals synchronously pumped by a single ultrafast laser for efficient intracavity signal amplification and output power enhancement. By deploying two identical MgO:PPLN crystals in a single standing-wave cavity, and two pump pulse trains of similar average power from the same Kerr-lens-mode-locked Ti:sapphire laser, a minimum enhancement of 56% in the extracted signal power is achieved, with un-optimized output coupling, when temporal synchronization between the two intracavity signal pulse trains is established, resulting in a corresponding enhancement of 49% in pump depletion. Using intracavity dispersion control, near-transform-limited signal pulses with clean spectrum are obtained.

Stable, high-power, Yb-fiber-based, picosecond ultraviolet generation at 355 nm using BiB3O6

We report a stable, high-power, high-repetition-rate, picosecond ultraviolet (UV) source at 355 nm based on single-pass sum-frequency generation of a mode-locked Yb-fiber laser at 1064 nm in the nonlinear crystal BiB3O6. By performing single-pass second-harmonic generation (SHG) in a 30-mm-long LiB3O5 crystal, up to 9.1 W of average green power at 532 nm is obtained at a single-pass SHG efficiency of 54%. The generated green pulses have a duration of 16.2 ps at a repetition rate of 79.5 MHz, with a passive power stability better than 0.5% rms and a pointing stability <12  μrad over 1 h, in high beam quality. The green radiation is then sum-frequency-mixed with the fundamental in a 10-mm-long BiB3O6 crystal, providing as much as 1.2 W of average UV power, at an infrared-to-UV conversion efficiency of 7.2%, with a passive power stability better than 0.4% rms over 3 h and a pointing stability <45  μrad over 1 h, in TEM00 spatial profile.

Continuous-wave, multimilliwatt, mid-infrared source tunable across 6.4-7.5 μm based on orientation-patterned GaAs

We report a continuous-wave (cw) source of tunable mid-infrared radiation providing tens of milliwatt of output power in the 6460-7517 nm spectral range. The source is based on difference-frequency generation (DFG) in orientation-patterned (OP)-GaAs pumped by a Tm-fiber laser at 2010 nm and a 1064 nm-Yb-fiber-pumped cw optical parametric oscillator. Using a 25.7-mm-long OP-GaAs crystal, we have generated up to 51.1 mW of output power at 6790 nm, with >40  mW and >20  mW across 32% and 80% of the mid-infrared tuning range, respectively, which is to the best of our knowledge the highest tunable cw power generated in OP-GaAs in this spectral range. The DFG output at maximum power exhibits passive power stability better than 2.3% rms over more than 1 h and a frequency stability of 1.8 GHz over more than 1 min, in high spatial beam quality. The system and crystal performance at high pump powers have been studied.

Yb-fiber-laser-pumped, high-repetition-rate picosecond optical parametric oscillator tunable in the ultraviolet

We report a compact tunable 240-MHz picosecond source for the ultraviolet based on intra-cavity frequency doubling of a signal-resonant MgO:sPPLT optical parametric oscillator (OPO), synchronously pumped at 532 nm in the green by the second harmonic of a mode-locked Yb-fiber laser at 80-MHz repetition rate. By deploying a 30-mm-long multi-grating MgO:sPPLT crystal for the OPO and a 5-mm-long BiB(3)O(6) crystal for internal doubling, we have generated tunable UV radiation across 317-340.5 nm, with up to 30 mW at 334.5 nm. The OPO also provides tunable visible signal in the red, across 634-681 nm, and mid-infrared idler radiation over 2429-3298 nm, with as maximum signal power of 800 mW at 642 nm. The signal pulses have a temporal duration of 12 ps at 665 nm and exhibit high spatial beam quality with Gaussian profile. The signal power is recorded to be naturally stable with a fluctuation of 1.4% rms over 14 hours, while UV power degradation has been observed and studied.

Fiber-laser-pumped, dual-wavelength, picosecond optical parametric oscillator

We report a simple, compact, picosecond, dual-wavelength optical parametric oscillator (DW-OPO) at 160 MHz, based on two MgO:PPLN crystals sharing the same cavity and synchronously pumped by an Yb-fiber laser at 1064 nm. The two signal and idler wavelength pairs are independently tunable in the near- and mid-infrared across 1550-1615 nm and 3118-3393 nm, respectively, and can be arbitrarily tuned, even to degeneracy and beyond, without coherent coupling, irrespective of operating wavelength. The DW-OPO provides two signal and idler pulse trains and delivers as much as 1.5 W of average signal power at a degenerate wavelength of 1550 nm from each arm, at a total (signal plus idler) power extraction efficiency of as much as 44%. The two output signal pulse trains have durations of ∼18 ps and ∼15.2 ps, with Gaussian spatial quality, and exhibit passive power stability, better than 3.6% rms over >5 h. We also demonstrate the possibility of tailoring the pulse trains from the DW-OPO by controlling the delay between the pump pulses at the input to the two MgO:PPLN crystals.

Fiber-laser-based green-pumped picosecond MgO:sPPLT optical parametric oscillator

We report a stable, high-power, picosecond optical parametric oscillator (OPO) at 160 MHz repetition rate synchronously pumped by a frequency-doubled mode-locked Yb-fiber laser at 532 nm and tunable in the near-infrared, across 874-1008 nm (signal) and 1126-1359 nm (idler). Using a 30-mm-long MgO:sPPLT crystal, the OPO provides average output power up to 780 mW in the signal at 918.58 nm and 600 mW in the idler at 1242 nm. The device operates stably over many days, even close to degeneracy, exhibiting passive long-term power stability better than 1.8% rms in the signal and 2.4% rms in the idler over 2.5 h at a temperature of 55°C. We investigate spectral and temporal characteristics of the signal pulses under different conditions and demonstrate cavity-length tuning enabled by the dispersion properties of MgO:sPPLT. The output signal pulses have a duration of 2.4 ps at 967 nm.

Stable, continuous-wave, ytterbium-fiber-based single-pass ultraviolet source using BiB3O6

We report stable continuous-wave (CW) ultraviolet (UV) generation at 354.7 nm using single-pass sum-frequency-generation (SFG) of a CW Yb-fiber laser at 1064 nm in the nonlinear crystal, BiB3O6. The 532 nm radiation is obtained by single-pass second-harmonic generation of the Yb-fiber laser in a 30-mm-long MgO:sPPLT crystal. Using a 10-mm-long BiB3O6 crystal for SFG, with a measured angular acceptance bandwidth of 0.57 mrad, we generate as much as 68 mW of CW single-frequency UV radiation with a passive power stability better than 3.2% rms over 2 h and frequency stability better than 436 MHz over 2.5 h. The UV output beam has a TEM00 spatial profile with M(x)(2)<1.6 and M(y)(2)<1.8.

Multi-gigahertz picosecond optical parametric oscillator pumped by 80-MHz Yb-fiber laser

We report a multi-gigahertz (GHz) repetition-rate picosecond optical parametric oscillator (OPO) based on MgO:PPLN, synchronously pumped by a Yb-fiber laser operating at 80 MHz, where the multiplication of repetition frequency is achieved using fractional increment in the OPO cavity length. Using this simple technique, we achieve OPO operation up to the 88th harmonic of the pump laser frequency, corresponding to a repetition rate as high as 7 GHz. Deploying a 5% output coupler, we are able to extract up to 960 mW of average signal power at the fundamental with 600 mW at the 88th harmonic (7 GHz), using a pump power of 5.6 W. The measured relative standard deviations of the fundamental and fifth harmonic signal power are recorded to be 1.6% and 3.5%, respectively, while the fundamental signal pulse duration is measured to be 18.4 ps.

Tunable, continuous-wave, ultraviolet source based on intracavity sum-frequency-generation in an optical parametric oscillator using BiB₃O₆

We report a continuous-wave (cw) source of tunable radiation across 333-345 nm in the ultraviolet (UV) using bismuth triborate, BiB₃O₆ (BIBO) as the nonlinear gain material. The source is based on internal sum-frequency-generation (SFG) in a cw singly-resonant optical parametric oscillator (OPO) pumped at 532 nm. The compact tunable source employs a 30-mm-long MgO:sPPLT crystal as the OPO gain medium and a 5-mm-long BIBO crystal for intracavity SFG of the signal and pump, providing up to 21.6 mW of UV power at 339.7 nm, with >15 mW over 64% of the SFG tuning range. The cw OPO is also tunable across 1158-1312 nm in the idler, delivering as much as 1.7 W at 1247 nm, with >1W over 65% of the tuning range. The UV output at maximum power exhibits passive power stability better than 3.4% rms and frequency stability of 193 GHz over more than one minute.

Directly phase-modulation-mode-locked doubly-resonant optical parametric oscillator

We present results on direct mode-locking of a doubly-resonant optical parametric oscillator (DRO) using an electro-optic phase modulator with low resonant frequency of 80 MHz as the single mode-locking element. Pumped by a cw laser at 532 nm and based on MgO:sPPLT as the nonlinear material, the DRO generates 533 ps pulses at 80 MHz and 471 ps pulses at 160 MHz. Stable train of mode-locked pulses is obtained at a modulation depth of 1.83 radians when the modulation frequency is precisely tuned and the cavity length is carefully adjusted. The effects of frequency detuning, modulation depth, input laser pump power, crystal temperature and position of modulator inside the cavity, on pulse duration and repetition rate have been studied. Operating at degeneracy, under mode-locked condition, the signal-idler spectrum exhibits a bandwidth of ~31 nm, and the spectrum has been investigated for different phase-matching temperatures. Mode-locked operation has been confirmed by second-harmonic-generation of the DRO output in a β-BaB₂O₄ crystal, where a 4 times enhancement in green power is observed compared to cw operation.

Continuous-wave, two-crystal, singly-resonant optical parametric oscillator: theory and experiment

We present theoretical and experimental study of a continuous-wave, two-crystal, singly-resonant optical parametric oscillator (T-SRO) comprising two identical 30-mm-long crystals of MgO:sPPLT in a four- mirror ring cavity and pumped with two separate pump beams in the green. The idler beam after each crystal is completely out-coupled, while the signal radiation is resonant inside the cavity. Solving the coupled amplitude equations under undepleted pump approximation, we calculate the maximum threshold reduction, parametric gain acceptance bandwidth and closest possible attainable wavelength separation in arbitrary dual-wavelength generation and compare with the experimental results. Although the T-SRO has two identical crystals, the acceptance bandwidth of the device is equal to that of a single-crystal SRO. Due to the division of pump power in two crystals, the T-SRO can handle higher total pump power while lowering crystal damage risk and thermal effects. We also experimentally verify the high power performance of such scheme, providing a total output power of 6.5 W for 16.2 W of green power at 532 nm. We verified coherent energy coupling between the intra-cavity resonant signal waves resulting Raman spectral lines. Based on the T-SRO scheme, we also report a new technique to measure the temperature acceptance bandwidth of the single-pass parametric amplifier across the OPO tuning range.