Profilin as a severe food allergen in allergic patients overexposed to grass pollen

BACKGROUND

Profilins are ubiquitous proteins that act as panallergens in sensitized patients, considered to be mild or incomplete food allergens. The aim of the study was to evaluate the role of profilins as severe food allergens in allergic patients overexposed to grass who were referred for severe food reactions and were sensitized to profilins.

METHODS

After a careful in vitro screening, 26 patients were included, classified into two groups, mild (17) and severe reactors (9), based on clinical history and subsequently provoked orally with purified profilin in a double-blind placebo-controlled food challenge setup.

RESULTS

A significant number of patients presented severe positive food challenge test reactions at low doses of the allergen profilin. Patients prone to suffer from severe reactions had lower IgG4/IgE ratio to major grass allergens than those who did not.

CONCLUSION

Profilins are complete food allergens in food-allergic patient populations that are exposed to high levels of grass pollen. This type of patient constitutes an optimal model to understand the link between respiratory and food allergies. The nature of the observed reactions and the low level of allergen eliciting the reactions suggest that intake through the oral mucosa might constitute a relevant route of exposure to food allergens.

Use of Dendrimers during the Synthesis of Pt-Ru Electrocatalysts for PEM Fuel Cells: Effects on the Physical and Electrochemical Properties

In this work, Pt-Ru catalysts were synthesized by a novel methodology which includes the use as encapsulating molecules of dendrimers of different generation: zero (DN-0), one (DN-1), two (DN-2), and three (DN-3). Synthesized catalysts were heat-treated at 350°C, and the effects of this treatment was established from the physical (X-ray dispersive energy (XDE) and X-ray diffraction (XRD)) and electrochemical characterization (cyclic voltammetry and chronoamperometry). Results showed that the heat-treatment benefits the catalytic properties of synthesized materials in terms of CO and methanol electrochemical oxidation. The curves for CO stripping were more defined for heat-treated catalysts, and methanol oxidation current densities were higher for these materials. These changes are principally explained from the removal of organic residues remaining on the surface of the Pt-Ru nanoparticles after the synthesis procedure. After the activation of the catalysts by heating at 350°C, the real importance of the use of these encapsulating molecules and the effect of the generation of the dendrimer become visible. From these results, it can be concluded that synthesized catalysts are good catalytic anodes for direct methanol fuel cells (DMFCs).

Carbon-Supported Fe Catalysts forCO2Electroreduction to High-Added Value Products: A DEMS Study: Effect of the Functionalization of the Support

Vulcan XC-72R-supported Fe catalysts have been synthesised for the electroreduction of CO2to high-added value products. Catalysts were obtained by the polyol method, using ethylene glycol as solvent and reducing agent. Prior to the metal deposition, Vulcan was subjected to different oxidation treatments in order to modify its surface chemistry and study its influence on the physicochemical and electrochemical properties of the catalysts, as well as on the product distribution. The oxidation treatments of the supports modify their textural properties, but do not affect significantly the physicochemical properties of catalysts. However, DEMS studies showed that the carbon support degradation, the distribution of products, and the catalytic activity toward the CO2electroreduction reaction depend significantly on the surface chemistry of the carbon support.

Characterization of carbon nanofibers grown over Ni and Ni-cu catalysts

Carbon nanofibers were obtained by thermo-catalytic decomposition of methane at 700 degrees C over Ni and Ni-Cu catalysts prepared by different methods (co-precipitation, impregnation and fusion) and using either Al or Mg as textural promoter. Characterization of the carbon thus obtained was performed by N2 adsorption isotherms (BET surface area), temperature programmed desorption (TPD), temperature programmed oxidation (TPO), X-ray diffraction, Raman spectrometry, and electron microscopy SEM and TEM. The carbon obtained possesses high crystallinity and poor surface chemistry. The crystallinity is enhanced when using Mg as textural promoter and in the presence of copper. SEM and TEM examinations show that the fibers have fishbone structure and they grow generally from one nickel particle (tip growing) although there are some bidirectional growing. Copper-doping lead to the formation of thicker filaments and promotes the formation of bamboo-like structures. Catalyst particles higher than 100 nm do not promote the formation of nanofibers and the carbon deposits as uniform coatings.

Carbon nanofiber growth optimization for their use as electrocatalyst support in proton exchange membrane (PEM) fuel cells

Carbon nanofiber (CNF) growth by catalytic decomposition of methane in a fixed-bed reactor was studied out to elucidate the influence of some important reaction conditions: temperature, space velocity and reactant partial pressure, in the morphological properties of the carbonaceous material obtained. The main objective is to synthesize a suitable carbonaceous nanomaterial to be used as support in platinum based electrocatalysts for Proton Exchange Membrane Fuel Cells (PEMFC) which improves current carbon blacks. High specific surface area is required in an electrocatalyst support since platinum dispersion is enhanced and so a cost-effective usage and high catalytic activity. Good electrical conductivity of carbon support is also required since the fuel cell power density is improved. With this proposal, characterization was carried out by nitrogen physisorption, XRD, SEM and TPO. The results were analysed by a factorial design and analysis of variance (ANOVA) in order to find an empirical correlation between operating conditions and CNF characteristics. It was found that the highest specific surface area and pore volume were found at 823 K and at a space velocity of 10 L gcat(-1) h(-1). The graphitic character of CNF, which is known to influence the electrical conductivity, presented a maximum value at temperatures between 923 K and 973 K. SEM images showed a narrow size distribution of CNF diameter between 40 and 90 nm and homogeneous appearance.

Study of the surface chemistry of modified carbon nanofibers by oxidation treatments in liquid phase

Carbon nanofibers (CNF) were grown by thermocatalytic decomposition of methane. Their texture and surface chemistry were modified by different oxidation treatments with HNO3 at different concentrations or a mixture of HNO3-H2SO4 to optimise their ability of dispersing active metal particles, because this material will be used as electrocatalytic support for polymeric electrolyte fuel cells. The effect of liquid phase oxidation on the surface chemistry and the textural properties of the CNF was studied by temperature programmed desorption (TPD), scanning electron microscopy (SEM) and N2-physisorption. Moreover, their thermal stability was studied by temperature programmed oxidation (TPO). During oxidation treatments functional groups were created and their number was function of the oxidation treatment conditions. Results indicated that an increase in severity of the oxidation treatment produces an increase in the number of surface oxygen groups and in the thermal stability. However, a very severe treatment can destroy partially the structure of carbon nanofibers.

Carbon monoxide and methanol oxidation at platinum catalysts supported on ordered mesoporous carbon: the influence of functionalization of the support

The influence of different functionalization treatments of the support on the electrocatalytic activity towards CO and methanol oxidation at platinum nanoparticles deposited on ordered mesoporous carbons (OMC) has been studied for the first time. Before deposition of the metal, the carbon support was functionalized applying several procedures, with the purpose to generate oxygenated groups for anchoring the Pt nanoparticles by the formic acid (FM) and borohydride (BM) reduction methods. Good dispersion of the catalyst was obtained in all cases. It has been shown that particle size, and consequently the lattice parameter and metal surface area, depends on the functionalization treatment employed. CO and methanol electrooxidation was studied at all prepared catalysts applying cyclic voltammetry. It was observed that CO stripping occurs at more negative potentials (around 0.10-0.15 V) with these supports with respect to Vulcan XC-72 supported catalysts, and the best results for both methods were achieved with OMC functionalized with concentrated nitric acid for 0.5 h. This carbon support presents a higher amount of oxygenated groups without the loss of the ordered structure. In situ infrared studies have been performed for the first time with this type of catalyst, showing that the effect of the carbon support on the CO oxidation potential is similar to the presence of a second metal as Ru under the same experimental conditions. Methanol electrooxidation is also dependent on the nature of the support, as proved from both cyclic voltammetry and chronoamperometry. In this case, results depend on the method of nanoparticles preparation and seem to be better for BM.