Femoral cartilage damage occurs at the zone of femoral head necrosis and can be accurately detected on traction MR arthrography of the hip in patients undergoing joint preserving hip surgery

The primary purpose was to answer the following question: What is the location and pattern of necrosis and associated chondrolabral lesions and can they be accurately detected on traction MR arthrography compared with intra-operative findings in patients undergoing hip preservation surgery for femoral head necrosis (FHN)? Retrospective, diagnostic case series on 23 patients (23 hips; mean age 29 ± 6 years) with diagnosis of FHN undergoing open/arthroscopic joint preserving surgery for FHN and pre-operative traction MR arthrography of the hip. A MR-compatible device for weight-adapted application of leg traction (15-23 kg) was used and coronal, sagittal and radial images were acquired. Location and pattern of necrosis and chondrolabral lesions was assessed by two readers and compared with intra-operative findings to calculate diagnostic accuracy of traction MR arthrography. On MRI all 23 (100%) hips showed central FHN, most frequently antero-superiorly (22/23, 96%) where a high prevalence of femoral cartilage damage was detected (18/23, 78%), with delamination being the most common (16/23, 70%) damage pattern. Intra-operative inspection showed central femoral head cartilage damage most frequently located antero-superiorly (18/23, 78%) with femoral cartilage delamination being most common (14/23, 61%). Traction MR arthrography enabled detection of femoral cartilage damage with a sensitivity/specificity of 95%/75% for reader 1 and 89%/75% for reader 2. To conclude, femoral cartilage damage occurs at the zone of necrosis and can be accurately detected using traction MR arthrography of the hip which may be helpful for surgical decision making in young patients with FHN.

Usefulness of MR Arthrography of the Hip with and without leg Traction in Detection of Intra-articular Bodies

RATIONALE AND OBJECTIVE

Although intra-articular bodies are a classic indication for MR arthrography and surgical removal, diagnostic studies are currently sparse. To assess the diagnostic performance of MR arthrography with and without leg traction in detection of intra-articular bodies in the hip joint.

MATERIAL AND METHODS

The institutional hip arthroscopy data base (2009-2016: 631 hips) was retrospectively reviewed. Inclusion criteria were hips with and without intra-articular bodies and direct MR arthrography performed with and without leg traction. Twenty-one hips with intra-articular bodies constituted the "disease-positive" group. Seventy-nine randomly selected hips without intra-articular bodies constituted the "disease-negative" group. Images were reviewed independently for presence of intra-articular bodies by two blinded readers. Overall diagnosis and location of intra-articular bodies was recorded (peripheral or central). Arthroscopy served as goldstandard for diagnosis and location of intra-articular bodies. Diagnostic performance and kappa statistics of traction MR arthrography with and without traction were calculated.

RESULTS

For both readers sensitivity/specificity of traction MR arthrography was 86%-95% respectively 90%-91% for overall diagnosis of intra-articular bodies and was 81%-86% respectively 90%-92%for MR arthrogrpahy without traction. For central intra-articular bodies sensitivity was higher for both readers with traction (79%-89%) than without traction (74% each).

CONCLUSION

MR arthrography with and without traction of the hip is highly accurate in identifying central and peripheral intra-articular bodies. Application of traction was further useful for visualization of centrally located intra-articular bodies.

Proof of concept: hip joint damage occurs at the zone of femoroacetabular impingement (FAI) in an experimental FAI sheep model

OBJECTIVE

In ovine hips chondrolabral damage as seen in cam-type femoroacetabular impingement (FAI) can be induced via an intertrochanteric varus osteotomy. However, it is yet to proven whether the observed cartilage damage is caused by a dynamic cam type impingement. Thus we asked, (1) whether actual cartilage damage observed after FAI induction in ovine hips occurs at the predicted, computed zone of FAI; (2) whether the extent of cartilage damage increases with ambulation time in this animal model?

DESIGN

In this experimental, controlled, comparative study 20 sheep underwent unilateral FAI induction through an intertrochanteric varus osteotomy. Preoperatively sheep underwent computed tomography to generate three-dimensional models of the osseous pelvis and femur. The models were used to predict impingement zones before and after simulated varus osteotomy using range of motion (ROM) analysis. Sheep were sacrificed after 14-40 weeks of ambulation. At sacrifice cartilage was inspected and (1) location of actual damage and computed impingement zones were compared; (2) Cartilage damage was compared between short- and long ambulation groups.

RESULTS

(1) The average location and the extent of peripheral and central cartilage lesions did not differ with the computed impingement zones (all P > 0.05). (2) Grades of central, posterior cartilage damage were more severe in the long-compared to the short ambulation group (2.2 ± 1.8 vs 0.4 ± 0.5; P = 0.030).

CONCLUSIONS

In this experimental ovine FAI model the surgical induction of an osseous impingement conflict between the femur and acetabulum causes cartilage damage at the zone of simulated FAI.

Patients with severe slipped capital femoral epiphysis treated by the modified Dunn procedure have low rates of avascular necrosis, good outcomes, and little osteoarthritis at long-term follow-up

AIMS

The modified Dunn procedure has the potential to restore the anatomy in hips with severe slipped capital femoral epiphyses (SCFE). However, there is a risk of developing avascular necrosis of the femoral head (AVN). In this paper, we report on clinical outcome, radiological outcome, AVN rate and complications, and the cumulative survivorship at long-term follow-up in patients undergoing the modified Dunn procedure for severe SCFE.

PATIENTS AND METHODS

We performed a retrospective analysis involving 46 hips in 46 patients treated with a modified Dunn procedure for severe SCFE (slip angle > 60°) between 1999 and 2016. At nine-year-follow-up, 40 hips were available for clinical and radiological examination. Mean preoperative age was 13 years, and 14 hips (30%) presented with unstable slips. Mean preoperative slip angle was 64°. Kaplan-Meier survivorship was calculated.

RESULTS

At the latest follow-up, the mean Merle d'Aubigné and Postel score was 17 points (14 to 18), mean modified Harris Hip Score was 94 points (66 to 100), and mean Hip Disability and Osteoarthritis Outcome Score was 91 points (67 to 100). Postoperative slip angle was 7° (1° to 16°). One hip (2%) had progression of osteoarthritis (OA). Two hips (5%) developed AVN of the femoral head and required further surgery. Three other hips (7%) underwent implant revision due to screw breakage or change of wires. Cumulative survivorship was 86% at ten-year follow-up.

CONCLUSION

The modified Dunn procedure for severe SCFE resulted in a low rate of AVN, low risk of progression to OA, and high functional scores at long-term follow-up. The slip deformities were mainly corrected but secondary impingement deformities can develop in some hips and may require further surgical treatment. Cite this article: Bone Joint J 2019;101-B:403-414.

Femoral osteochondroplasty can be performed effectively without the risk of avascular necrosis or femoral neck fractures in an experimental ovine FAI model

OBJECTIVE

The experimental induction of cam-type femoroacetabular impingement (FAI) in sheep is established. To tap the full potential of this ovine model, one should be able to perform a femoral osteochondroplasty safely. This study was based on previous cadaver experiments on the blood supply to the ovine femoral head and on the biomechanical strength of the proximal femur following offset creation. We hypothesized that offset creation in this ovine FAI model does not lead to (1) avascular necrosis (AVN) of the ovine femoral head or (2) iatrogenic femoral neck fractures and (3) can be performed effectively.

DESIGN

In this experimental, controlled, prospective study nine sheep underwent unilateral FAI induction through an intertrochanteric, varus osteotomy. Seventy days following FAI induction, femoral osteochondroplasty was performed. Sheep were sacrificed after another 140 days. Radiographs, computed tomography (CT) scans and MRI were acquired. Histologic samples were stained with hematoxylin-eosin. (1) The multimodal Association Research Circulation Osseous (ARCO) classification was used for assessment of AVN. (2) Femoral neck fractures were assessed with the multimodal imaging approach. (3) Pre- and postoperative (=after sacrifice) alpha angles and femoral neck diameters were compared.

RESULTS

(1) No signs for AVN according to the ARCO classification or (2) for femoral neck fractures were detected. (3) Mean alpha angles and femoral neck diameters decreased significantly (p < 0.001) superiorly by at least 30° respectively 4 mm after the offset creation.

CONCLUSIONS

Femoral osteochondroplasty can be performed effectively and without the risk of AVN or femoral neck fractures in this ovine FAI model.

[Bernese periacetabular osteotomy. : Indications, technique and results 30 years after the first description]

The Bernese periacetabular osteotomy (PAO) is a surgical technique for the treatment of (1) hip dysplasia and (2) femoroacetabular impingement due to acetabular retroversion. The aim of the surgery is to prevent secondary osteoarthritis by improvement of the hip biomechanics. In contrast to other pelvic osteotomies, the posterior column remains intact with this technique. This improves the inherent stability of the acetabular fragment and thereby facilitates postoperative rehabilitation. The birth canal remains unchanged. Through a shortened ilioinguinal incision, four osteotomies and one controlled fracture around the acetabulum are performed. The direction of acetabular reorientation differs for both indications while the sequence of the osteotomies remains the same. This surgical approach allows for a concomitant osteochondroplasty in the case of an aspherical femoral head-neck junction. The complication rate is relatively low despite the complexity of the procedure. The key point for a successful long term outcome is an optimal reorientation of the acetabulum for both indications. With an optimal reorientation and a spherical femoral head, the cumulative survivorship of the hip after 10 years is 80-90 %. For the very first 75 patients, the cumulative 20-year survivorship was 60 %. The preliminary evaluation of the same series at a 30-year follow-up still showed a survivorship of approximately 30 %. The PAO has become the standard procedure for the surgical therapy of hip dysplasia in adolescents and adults.

The modified Dunn procedure for slipped capital femoral epiphysis: the Bernese experience

PURPOSE

Based on previous investigations on the vascular blood supply to the femoral head, a technique for anatomical reduction after slipped capital femoral epiphysis was developed. This technique is a modification of the original technique by Dunn using a retinacular soft-tissue flap. This allows the visual control of the epiphyseal vascular blood supply. We report the experience at the inventor's institution with a critical discussion of the available literature.

METHODS

Using a trochanteric osteotomy for surgical dislocation of the hip, a retinacular soft tissue flap is created containing the deep branch of the medial femoral circumflex artery, the external rotators and the capsule. The femoral epiphysis can be mobilised safely and reduced on the femoral neck after resection of the almost constantly present reactive metaphyseal callus.

RESULTS

In our institution, the rate of avascular necrosis with 2% is comparably low to Dunn's original results. It is only present in cases where no bleeding was already evident before reduction of the epiphysis. The ten-year long-term results are favorable in these cases with a good functional result and only little progression of osteoarthritis. However, other authors have reported higher rates of avascular necrosis up to 24% in their initial experience.

CONCLUSIONS

In experienced hands using the correct meticulous surgical technique, the results are favorable regarding the rates of avascular necrosis, the functional outcome and the development of radiographic osteoarthritis - even in acute and severe cases. Avascular necrosis is rare but can be observed if there is no evidence of intra-operative femoral head perfusion before and after reduction of the epiphysis.

Patients undergoing surgical hip dislocation for the treatment of acetabular fractures show favourable long-term outcome

Aims

The aims of this study were to determine the cumulative ten-year survivorship of hips treated for acetabular fractures using surgical hip dislocation and to identify factors predictive of an unfavourable outcome.

Patients and Methods

We followed up 60 consecutive patients (61 hips; mean age 36.3 years, standard deviation (sd) 15) who underwent open reduction and internal fixation for a displaced fracture of the acetabulum (24 posterior wall, 18 transverse and posterior wall, ten transverse, and nine others) with a mean follow-up of 12.4 years (sd 3).

Results

Clinical grading was assessed using the modified Merle d’Aubigné score. Radiographic osteoarthritis was graded according to Matta. Kaplan-Meier survivorship and a univariate Cox-regression analysis were carried out using the following endpoints: total hip arthroplasty, a Merle d’Aubigné score of < 15 and/or progression of osteoarthritis.

Conclusion

The ten-year cumulative survivorship was 82% (95% confidence interval 71 to 92). Predictors for the defined endpoints were femoral chondral lesions, marginal impaction, duration of surgery, and age of patient. Cite this article: Bone Joint J 2017;99-B:508–15.

Prevention of cement leakage into the hip joint by a standard cement plug during PFN-A cement augmentation: a technical note

Medial penetration of the helical blade into the hip joint after fixation of trochanteric fractures using the proximal femur nail antirotation (PFN-A) is a potential failure mode. In low demand patients a blade exchange with cement augmentation may be an option if conversion to total hip arthroplasty is unfeasible to salvage the cut-through. This article describes a technique to avoid intraarticular cement leakage using a cement plug to close the defect in the femoral head caused by the cut-through.

Size and shape of the lunate surface in different types of pincer impingement: theoretical implications for surgical therapy

OBJECTIVE

Acetabular rim trimming is indicated in pincer hips with an oversized lunate surface but could result in a critically decreased size of the lunate surface in pincer hips with acetabular malorientation. There is a lack of detailed three-dimensional anatomy of lunate surface in pincer hips. Therefore, we questioned how does (1) size and (2) shape of the lunate surface differ among hips with different types of pincer impingement?

METHOD

We retrospectively compared size and shape of the lunate surface between acetabular retroversion (48 hips), deep acetabulum (34 hips), protrusio acetabuli (seven hips), normal acetabuli (30 hips), and hip dysplasia (45 hips). Using magnetic resonance imaging (MRI) arthrography with radial slices we measured size in percentage of the femoral head coverage and shape using the outer (inner) center-edge angles and width of lunate surface.

RESULTS

Hips with retroversion had a decreased size and deep hips had normal size of the lunate surface. Both had a normal shape of the outer acetabular rim. Protrusio hips had an increased size and a prominent outer acetabular rim. In all three types of pincer hips the acetabular fossa was increased.

CONCLUSION

Size and shape of the lunate surface differs substantially among different types of pincer impingement. In contrast to hips with protrusio acetabuli, retroverted and deep hips do not have an increased size of the lunate surface. Acetabular rim trimming in retroverted and deep hips should be performed with caution. Based on our results, acetabular reorientation would theoretically be the treatment of choice in retroverted hips.

Mid-term results in relation to age and analysis of predictive factors after fixation of acetabular fractures using the modified Stoppa approach

INTRODUCTION

Data concerning outcome after management of acetabular fractures by anterior approaches with focus on age and fractures associated with roof impaction, central dislocation and/or quadrilateral plate displacement are rare.

METHODS

Between October 2005 and April 2009 a series of 59 patients (mean age 57 years, range 13-91) with fractures involving the anterior column was treated using the modified Stoppa approach alone or for reduction of displaced iliac wing or low anterior column fractures in combination with the 1st window of the ilioinguinal approach or the modified Smith-Petersen approach, respectively. Surgical data, accuracy of reduction, clinical and radiographic outcome at mid-term and the need for endoprosthetic replacement in the postoperative course (defined as failure) were assessed; uni- and multivariate regression analysis were performed to identify independent predictive factors (e.g. age, nonanatomical reduction, acetabular roof impaction, central dislocation, quadrilateral plate displacement) for a failure. Outcome was assessed for all patients in general and in accordance to age in particular; patients were subdivided into two groups according to their age (group "<60yrs", group "≥60yrs").

RESULTS

Forty-three of 59 patients (mean age 54yrs, 13-89) were available for evaluation. Of these, anatomic reduction was achieved in 72% of cases. Nonanatomical reduction was identified as being the only multivariate predictor for subsequent total hip replacement (Adjusted Hazard Ratio 23.5; p<0.01). A statistically significant higher rate of nonanatomical reduction was observed in the presence of acetabular roof impaction (p=0.01). In 16% of all patients, total hip replacement was performed and in 69% of patients with preserved hips the clinical results were excellent or good at a mean follow up of 35±10 months (range: 24-55). No statistical significant differences were observed between both groups.

CONCLUSION

Nonanatomical reconstruction of the articular surfaces is at risk for failure of joint-preserving management of acetabular fractures through an isolated or combined modified Stoppa approach resulting in total joint replacement at mid-term. In the elderly, joint-preserving surgery is worth considering as promising clinical and radiographic results might be obtained at mid-term.

The iliocapsularis muscle: an important stabilizer in the dysplastic hip

BACKGROUND

The iliocapsularis muscle is a little known muscle overlying the anterior hip capsule postulated to function as a stabilizer of dysplastic hips. Theoretically, this muscle would be hypertrophied in dysplastic hips and, conversely, atrophied in stable and well-constrained hips. However, these observations have not been confirmed and the true function of this muscle remains unknown.

QUESTIONS/PURPOSES

We quantified the anatomic dimensions and degree of fatty infiltration of the iliocapsularis muscle and compared the results for 45 hips with deficient acetabular coverage (Group I) with 40 hips with excessive acetabular coverage (Group II).

PATIENTS AND METHODS

We used MR arthrography to evaluate anatomic dimensions (thickness, width, circumference, cross-sectional area [CSA], and partial volume) and the amount of fatty infiltration.

RESULTS

We observed increased thickness, width, circumference, CSA, and partial volume of the iliocapsularis muscle in Group I when compared with Group II. Additionally, hips in Group I had a lower prevalence of fatty infiltration compared with those in Group II. The iliocapsularis muscle typically was hypertrophied, and there was less fatty infiltration in dysplastic hips compared with hips with excessive acetabular coverage.

CONCLUSION

These observations suggest the iliocapsularis muscle is important for stabilizing the femoral head in a deficient acetabulum. This muscle serves as an anatomic landmark when performing a periacetabular osteotomy. Additionally, preoperative evaluation of morphologic features of the muscle can be used as an adjunct for decision making when treating patients with borderline hip dysplasia or femoroacetabular impingement.

Surgical dislocation of the hip for the fixation of acetabular fractures

Surgical dislocation of the hip in the treatment of acetabular fractures allows the femoral head to be safely displaced from the acetabulum. This permits full intra-articular acetabular and femoral inspection for the evaluation and potential treatment of cartilage lesions of the labrum and femoral head, reduction of the fracture under direct vision and avoidance of intra-articular penetration with hardware. We report 60 patients with selected types of acetabular fracture who were treated using this approach. Six were lost to follow-up and the remaining 54 were available for clinical and radiological review at a mean follow-up of 4.4 years (2 to 9).

Substantial damage to the intra-articular cartilage was found in the anteromedial portion of the femoral head and the posterosuperior aspect of the acetabulum. Labral lesions were predominantly seen in the posterior acetabular area. Anatomical reduction was achieved in 50 hips (93%) which was considerably higher than that seen in previous reports. There were no cases of avascular necrosis. Four patients subsequently required total hip replacement. Good or excellent results were achieved in 44 hips (81.5%). The cumulative eight-year survivorship was 89.0% (95% confidence interval 84.5 to 94.1). Significant predictors of poor outcome were involvement of the acetabular dome and lesions of the femoral cartilage greater than grade 2. The functional mid-term results were better than those of previous reports.

Surgical dislocation of the hip allows accurate reduction and a predictable mid-term outcome in the management of these difficult injuries without the risk of the development of avascular necrosis.

Material properties of common suture materials in orthopaedic surgery

Suture materials in orthopaedic surgery are used for closure of wounds, repair of fascia, muscles, tendons, ligaments, joint capsules, and cerclage or tension band of certain fractures. The purpose of this study was to compare the biomechanical properties of eleven commonly used sutures in orthopaedic surgery. Three types of braided non-absorbable and one type of braided absorbable suture material with different calibers (n=77) underwent biomechanical testing for maximum load to failure, strain, and stiffness. All samples were tied by one surgeon with a single SMC (Seoul Medical Center) knot and three square knots. The maximum load to failure and strain were highest for #5 FiberWire and lowest for #0 Ethibond Excel (p<0.001). The stiffness was highest for #5 FiberWire and lowest for #2-0 Vicryl (p<0.001). In all samples, the failure of the suture material occurred at the knot There was no slippage of the knot in any of the samples tested. This data will assist the orthopaedic surgeon in selection and application of appropriate suture materials and calibers to specific tasks.

[Femoroacetabular impingement: radiographic diagnosis--what the radiologist should know]

OBJECTIVE

The purpose of this article is to show the important radiographic criteria that indicate the two types of femoroacetabular impingement: pincer and cam impingement. In addition, potential pitfalls in pelvic imaging concerning femoroacetabular impingement are shown.

CONCLUSION

Femoroacetabular impingement is a major cause for early "primary" osteoarthritis of the hip. It can easily be recognized on conventional radiographs of the pelvis and the proximal femur.

[Imaging in developmental dysplasia of the hip]

Modern imaging techniques are an invaluable tool for assessing pathomorphological changes of the hip. Thorough diagnostic analysis and therapeutic decision making mainly rely on correct interpretation of conventional radiographic projections as well as more modern techniques, including magnetic resonance arthrography. This article gives an overview of the imaging techniques that are routinely used for assessing pathological conditions of the hip, with a special focus on diagnostic findings in developmental dysplasia of the hip as well as in femoroacetabular impingement.

Femoral morphology differs between deficient and excessive acetabular coverage

Structural deformities of the femoral head occurring during skeletal development (eg, Legg-Calvé-Perthes disease) are associated with individual shapes of the acetabulum but it is unclear whether differences in acetabular shape are associated with differences in proximal femoral shape. We questioned whether the amount of acetabular coverage influences femoral morphology. We retrospectively compared the proximal femoral anatomy of 50 selected patients (50 hips) with developmental dysplasia of the hip (lateral center-edge angle [LCE] < or = 25 degrees ; acetabular index > or = 14 degrees ) with 45 selected patients (50 hips) with a deep acetabulum (LCE > or = 39 degrees ). Using MRI arthrography we measured head sphericity, epiphyseal shape, epiphyseal extension, and femoral head-neck offset. A deep acetabulum was associated with a more spherical head shape, increased epiphyseal height with a pronounced extension of the epiphysis towards the femoral neck, and an increased offset. In contrast, dysplastic hips showed an elliptical femoral head, decreased epiphyseal height with a less pronounced extension of the epiphysis, and decreased head-neck offset. Hips with different acetabular coverage are associated with different proximal femoral anatomy. A nonspherical head in dysplastic hips could lead to joint incongruity after an acetabular reorientation procedure.

LEVEL OF EVIDENCE

Level IV, retrospective comparative study. See the Guidelines for Authors for a complete description of levels of evidence.

Accuracy considerations in navigated cup placement for total hip arthroplasty

Computer assisted orthopaedic surgery (CAOS) technology has recently been introduced to overcome problems resulting from acetabular component malpositioning in total hip arthroplasty. Available navigation modules can conceptually be categorized as computer tomography (CT) based, fluoroscopy based, or image-free. The current study presents a comprehensive accuracy analysis on the computer assisted placement accuracy of acetabular cups. It combines analyses using mathematical approaches, in vitro testing environments, and an in vivo clinical trial. A hybrid navigation approach combining image-free with fluoroscopic technology was chosen as the best compromise to CT-based systems. It introduces pointer-based digitization for easily assessable points and bi-planar fluoroscopy for deep-seated landmarks. From the in vitro data maximum deviations were found to be 3.6° for inclination and 3.8° for anteversion relative to a pre-defined test position. The maximum difference between intraoperatively calculated cup inclination and anteversion with the postoperatively measured position was 4° and 5°, respectively. These data coincide with worst cases scenario predictions applying a statistical simulation model. The proper use of navigation technology can reduce variability of cup placement well within the surgical safe zone. Surgeons have to concentrate on a variety of error sources during the procedure, which may explain the reported strong learning curves for CAOS technologies.

Hip2Norm: an object-oriented cross-platform program for 3D analysis of hip joint morphology using 2D pelvic radiographs

We developed an object-oriented cross-platform program to perform three-dimensional (3D) analysis of hip joint morphology using two-dimensional (2D) anteroposterior (AP) pelvic radiographs. Landmarks extracted from 2D AP pelvic radiographs and optionally an additional lateral pelvic X-ray were combined with a cone beam projection model to reconstruct 3D hip joints. Since individual pelvic orientation can vary considerably, a method for standardizing pelvic orientation was implemented to determine the absolute tilt/rotation. The evaluation of anatomically morphologic differences was achieved by reconstructing the projected acetabular rim and the measured hip parameters as if obtained in a standardized neutral orientation. The program had been successfully used to interactively objectify acetabular version in hips with femoro-acetabular impingement or developmental dysplasia. Hip(2)Norm is written in object-oriented programming language C++ using cross-platform software Qt (TrollTech, Oslo, Norway) for graphical user interface (GUI) and is transportable to any platform.

Irritation der Iliopsoassehne nach totalendoprothetischem Hüftgelenkersatz

Chronic irritation of the iliopsoas tendon is a rare cause of persistent pain after total joint replacement of the hip. In the majority of cases, pain results from a mechanical conflict between the iliopsoas tendon and the anterior edge of the acetabular cup after total hip arthroplasty. Pain can be reproduced by active flexion of the hip and by active raising of the straightened leg. In addition, painful leg raising against resistance and passive hyperextension are suggestive of an irritation of the iliopsoas tendon. Symptoms evolve from a mechanical irritation of the iliopsoas tendon and an oversized or retroverted acetabular cup, screws penetrating into the inner aspect of the ilium, or from bone cement protruding beyond the anterior acetabular rim. The diagnosis may be assumed on conventional radiographs and confirmed by CT scans. Fifteen patients with psoas irritation after total hip replacement are reported on. Eleven patients were treated surgically. The acetabular cup was revised and reoriented with more anteversion in six patients, isolated screws penetrating into the tendon were cut and leveled in three patients, and prominent bone cement in conflict with the tendon was resected once. A partial release of the iliopsoas tendon only was performed in another patient. Follow-up examination (range: 11-89 months) revealed that nine patients were free of pain and two patient had mild residual complaints. Psoas irritation in combination with total hip replacement can be prevented by a correct surgical technique, especially with proper selection of the cup size and insertion of the acetabular cup avoiding a rim position exceeding the level of the anterior acetabular rim.

[Conventional vs minimally invasive total hip arthroplasty. A prospective study of rehabilitation and complications]

BACKGROUND

In a prospective, nonrandomized study the outcome in terms of rehabilitation and complications of total hip arthroplasty (THA) through a superior capsulotomy exposure (study group) was compared to THA performed through a direct lateral exposure (control group).

PATIENTS AND METHODS

The study group (106 THA) and the control group (107 THA) were controlled for complexity and had no significant differences in age, sex, diagnosis, or body mass index.

RESULTS

The study group had improved recovery at 6 weeks after surgery which was statistically significant (p<0.001). In addition, the study group had a lower incidence of perioperative complications.

CONCLUSION

The current study demonstrates the potential that less-invasive surgical techniques with the philosophy of maximally preserving the abductors, posterior capsule, and short rotators may result in a safer operation with an accelerated recovery.

Grundlagen der computerassistierten Chirurgie

Using navigation systems in general orthopaedic surgery and, in particular, knee replacement is becoming more and more accepted. This paper describes the basic technological concepts of modern computer assisted surgical systems. It explains the variation in currently available systems and outlines research activities that will potentially influence future products. In general, each navigation system is defined by three components: (1) the therapeutic object is the anatomical structure that is operated on using the navigation system, (2) the virtual object represents an image of the therapeutic object, with radiological images or computer generated models potentially being used, and (3) last but not least, the navigator acquires the spatial position and orientation of instruments and anatomy thus providing the necessary data to replay surgical action in real-time on the navigation system's screen.

Estimation of pelvic tilt on anteroposterior X-rays--a comparison of six parameters

OBJECTIVE

To compare six different parameters described in literature for estimation of pelvic tilt on an anteroposterior pelvic radiograph and to create a simple nomogram for tilt correction of prosthetic cup version in total hip arthroplasty.

DESIGN

Simultaneous anteroposterior and lateral pelvic radiographs are taken routinely in our institution and were analyzed prospectively. The different parameters (including three distances and three ratios) were measured and compared to the actual pelvic tilt on the lateral radiograph using simple linear regression analysis.

PATIENTS

One hundred and four consecutive patients (41 men, 63 women with a mean age of 31.7 years, SD 9.2 years, range 15.7-59.1 years) were studied.

RESULTS

The strongest correlation between pelvic tilt and one of the six parameters for both men and women was the distance between the upper border of the symphysis and the sacrococcygeal joint. The correlation coefficient was 0.68 for men (P<0.001) and 0.61 for women (P<0.001). Based on this linear correlation, a nomogram was created that enables fast, tilt-corrected cup version measurements in clinical routine use.

CONCLUSION

This simple method for correcting variations in pelvic tilt on plain radiographs can potentially improve the radiologist's ability to diagnose and interpret malformations of the acetabulum (particularly acetabular retroversion and excessive acetabular overcoverage) and post-operative orientation of the prosthetic acetabulum.

Tilt and rotation correction of acetabular version on pelvic radiographs

Anteroposterior pelvic radiographs are the gold standard of imaging for mechanical hip problems. However, correct interpretation is difficult because the projected morphologic features of the acetabulum and nearly all routinely used hip parameters depend on individual pelvic position, which can vary considerably during acquisition. We developed software that recreates the projected acetabular rim and the measured hip parameters as if obtained in a standardized orientation. The vertical and horizontal distances between two easy identifiable points were used as indicators of tilt and rotation. These points were the middle of the sacrococcygeal joint and the middle of the upper border of the symphyseal gap. Calibration of the indicators was achieved by means of serial pelvic radiographs of 20 cadaver pelves. Validation of tilt indicator in 100 patients and a theoretical error analysis revealed that for accurate tilt prediction an additional one-time lateral radiograph of the pelvis is mandatory. The computer-assisted method allows standardized evaluation of anatomic morphologic differences of femoral coverage (dysplasia, retroversion), making their clinical relevance for development of early osteoarthritis more valuable.

[Cup placement in hip replacement surgery -- A comparison of free-hand and computer assisted cup placement in total hip arthroplasty -- a multi-center study]

AIM

The purpose of the current study was to determine the accuracy of free hand and computer-assisted (CAS) cup placement.

MATERIAL AND METHODS

Between June 1985 and August 2001, 105 free-hand and from March to November 1999 80 total hip arthroplasties under computer assistance were implanted in the above mentioned centers. To determine the accuracy of the cups, the inclination and anteversion angles were measured. In all cases the cup position was measured with a CT-investigation of the pelvis. Statistical analysis was performed with the F-test.

RESULTS

With regard to the inclination and anteversion angles the variability of the cup position was significantly higher in the group of free hand implanted cups. In the CAS group we could not find any "extreme" positions.

CONCLUSION

Using computer-assisted surgery a significantly higher reproducible cup position can be obtained. Long time survey may present a lowering of the rate of early and late complications caused by better prostheses alignment in the follow up.

The accuracy of free-hand cup positioning--a CT based measurement of cup placement in 105 total hip arthroplasties

We studied 105 patients who received a total hip arthroplasty between June 1985 and August 2001 using freehand positioning of the acetabular cup. Using pelvic CT scan and the hip-plan module of SurgiGATE-System (Medivision, Oberdorf, Switzerland), we measured the angles of inclination and anteversion of the cup. Mean inclination angle was 45.8 degrees +/-10.1 degrees (range: 23.0-71.5 degrees ) and mean anteversion angle was 27.3 degrees +/-15.0 degrees (range: -23.5 degrees to 59.0 degrees ). We compared the results to the "safe" position as defined by Lewinnek et al. and found that only 27/105 cups were implanted within the limits of the safe position. We conclude that a safe position as defined by Lewinnek et al. [13] was only achieved in a minority of the cups that were implanted freehand.