Association between genetic polymorphisms in the promoter region of the defensin beta 1 gene and persistent apical periodontitis

AIM

To evaluate the association between the promoter region of defensin beta 1 (DEFB1) genetic polymorphisms and persistent apical periodontitis (PAP) in Brazilian patients.

METHODOLOGY

Seventy-three patients with post-treatment PAP (PAP group) and 89 patients with root filled teeth with healed and healthy periradicular tissues (healed group) were included (all teeth had apical periodontitis lesions at the beginning of the treatment). Patients who had undergone at least 1 year of follow-up after root canal treatment were recalled, and their genomic DNA was extracted from saliva. Two single nucleotide polymorphisms (SNPs) in DEFB1 at the g. -52G>A (rs1799946) and g. -20G>A (rs11362) positions were analysed using real-time polymerase chain reaction. The chi-squared test was performed, and the odds ratios were calculated using Epi Info 3.5.2. Logistic regression analysis in the codominant model, using the time of follow-up as a variable, was used to evaluate the SNP-SNP interaction. All tests were performed with an established alpha of 0.05 (P = 0.05).

RESULTS

For the rs11362 polymorphism in the codominant and recessive models, patients who carried two copies of the T allele had a significantly lower risk of developing PAP (P = 0.040 and P = 0.031, respectively). For the rs1799946 polymorphism in DEFB1 in the codominant and recessive models, carrying one copy of the T allele significantly increased the risk of developing PAP (P = 0.007 and P = 0.031, respectively). In the logistic regression, both polymorphisms were associated with PAP as well as the SNP-SNP interaction (P < 0.0001).

CONCLUSIONS

Polymorphisms in DEFB1 genes were associated with the development of post-treatment persistent apical periodontitis.

Effect of carbodiimide and chlorhexidine on the bond strength longevity of resin cement to root dentine after radiation therapy

AIM

To evaluate the effect of carbodiimide (EDC) and chlorhexidine (CHX) on the bond strength (BS) of resin cement to root dentine of teeth submitted to radiotherapy.

METHODOLOGY

One hundred and twenty extracted maxillary canines were selected and assigned to 2 groups (n = 60): nonirradiated and irradiated (30 cycles of 2 Gy, total 60 Gy). Roots lengths were standardized, and canals were prepared and filled. Post spaces were then prepared, and the samples were redistributed according to dentine treatment (n = 20): saline solution (SF); CHX 2%; or EDC 0.5M. After drying the post space, fibreglass posts were cemented. Cross-sectioned slices were obtained, and in half of the specimens of each subgroup (n = 10), the analysis was performed immediately; the others (n = 10) were stored for 10 months before analyses. The most cervical slice of each third was subjected to a push-out test and failure pattern analysis (n = 10), and the most apical slice submitted to the analysis of the adhesive interface by SEM (n = 5). The bond strength data were submitted to anova and Tukey tests, the adhesive interface adaptation was submitted to Kruskal-Wallis and Dunn's tests, and the Chi-square test was used to evaluate the type of failure.

RESULTS

The irradiated specimens had significantly lower bond strength (13.8 ± 4.3) than the nonirradiated (18.1 ± 3.1; P < 0.001). For the irradiated teeth, the bond strengths were significantly lower in the SF and CHX groups (P < 0.001). Also, the bond strengths reduced significantly after 10 months in the SF and CHX groups (P < 0.001). Cohesive failures occurred in dentine for irradiated specimens. Poorer interface adaptation, dentine fractures and microfractures were observed in irradiated specimens, and better adaptation was observed for specimens after EDC treatment.

CONCLUSIONS

Radiotherapy was associated with lower bond strength and worse interface adaptation. Dentine treatment with EDC contributed to adhesive interface longevity during the cementation of glass fibre posts in nonirradiated and irradiated teeth.

Potential role of TP63 in apical periodontitis development

AIM

To investigate the expression of TP63 in apical periodontitis (AP) tissues and the association of single nucleotide polymorphisms (SNPs) in the TP63 gene with AP using a case-control dataset.

METHODOLOGY

Expression of TP63 in human AP lesions (apical abscess, radicular cyst, periapical granuloma) was evaluated using immunohistochemistry. A case-control association study was performed to assess the association of TP63 polymorphisms in individuals having AP with or without associated pain. Cases were defined as subjects with deep caries and AP (n = 151) and subjects with symptomatic apical periodontitis or acute apical abscess (n = 124). Subjects without AP (n = 169) and asymptomatic (n = 196) were used as controls, respectively. Saliva samples were collected as source of genomic DNA. Twelve SNPs in the TP63 gene were selected for genotyping using Taqman chemistry in real-time PCR. Data analysis was performed using PLINK software. The Bonferroni method was applied to correct for multiple testing; α ≤ 0.004 indicates significant differences between groups.

RESULTS

TP63 expression was evident in apical abscesses and radicular cysts, while weaker expression was observed in periapical granulomas. Positive expression was observed in mononuclear cells in the granulation tissues of all AP lesions. Regarding the presence of AP, a trend for allelic association was observed for rs16864812 and rs9810322 (P = 0.04) and rs9810322 genotypes were also nominally associated with AP under a dominant model (P = 0.04). When considering the presence of periapical pain, a trend for allelic and genotypic association was observed for rs10155037 (P = 0.03). Haplotypes were also associated with AP and periapical pain (P ≤ 0.05).

CONCLUSIONS

Apical periodontitis is a complex multifactorial condition and it is likely that multiple genes and environmental effects may influence its susceptibility, progression or both. TP63 variants may play a role in AP pathogenesis and susceptibility, individually or interactively with other genes. Additional studies in other populations and functional studies are needed to improve understanding of the role of TP63 in AP.

Longevity of bond strength of resin cements to root dentine after radiation therapy

AIM

To evaluate the bond strength and adhesive interface between several resin cements and root dentine immediately and 6 months after radiotherapy.

METHODOLOGY

Sixty maxillary canines were selected and randomly assigned to two groups (n = 30): one group was not irradiated and the other one was subjected to a cumulative radiation dose of 60 Gy. The teeth were sectioned to obtain roots 16 mm long and the canals were prepared with the Reciproc system (R50) and filled using a lateral condensation technique with an epoxy resin sealer. Each group was divided into three subgroups (n = 10) according to the resin cement used for fibreglass fibre post cementation: RelyX-U200, Panavia-F2.0 and RelyX ARC. The posts were cemented in accordance with the manufacturer's recommendations. Three 1-mm-thick dentine slices were then obtained from each root third. The first two slices in the crown-apex direction of each third were selected for the push-out test. The failure mode after debonding was determined with a stereo microscope. The third slice from each root third was selected for scanning electron microscopy (SEM) analyses to examine the resin cement-dentine interface with 100, 1000, 2000 and 4000× magnification. Bond strength data were analysed by anova and Tukey's test (α = 0.05).

RESULTS

Significantly lower bond strength (P < 0.0001) was obtained after irradiation compared to nonirradiated teeth. RelyX-U200 cemented fibre posts had the higher bond strength (15.17 ± 5.89) compared with RelyX ARC (P < 0.001) and Panavia-F2.0 (P < 0.001). The evaluation after 6 months revealed lower bond strength values compared to the immediate values (P < 0.001) for irradiated and nonirradiated teeth. Cohesive failures occurred in the irradiated dentine. SEM revealed fractures, microfractures and fewer collagen fibres in irradiated root dentine. RelyX-U200 and Panavia-F2.0 were associated with a juxtaposed interface of the cement with the radicular dentine in irradiated and nonirradiated teeth, and for RelyX ARC, hybrid layer formation and tags were observed in both irradiated and nonirradiated teeth.

CONCLUSION

Radiation was associated with a decrease in the push-out bond strength and with lower resin cement/root dentine interface adaptation. Self-adhesive resin cement was a better alternative for fibre post cementation in teeth subjected to radiation therapy. The bond strength decreased after 6 months.

Wear profile of canal wall surfaces and bond strength of endodontic sealers after in situ acid challenge

AIM

To evaluate the wear of root wall surfaces, the bond strength of sealers to dentine and the demineralization around root filling materials after canals were exposed to acid challenge in situ.

METHODOLOGY

Eighty-seven roots of mandibular incisors were selected. Thirty-two were used in the laboratory bond strength study (n = 8), and 55 in the in situ study (n = 11). Root canals were prepared biomechanically and then filled with gutta-percha and AH Plus, MTA Fillapex, Sealapex or Endofill. For 14 days, 11 participants used intra-oral devices with five sterilized roots (four experimental and one control - only canal prepared). Drops of sucrose were dripped onto roots allowing the accumulation of biofilm on canal surfaces. Roots were removed, sectioned and analysed for the following: bond strength of filling material using a push-out test and also wear profile and dentine demineralization using confocal microscopy. Bond strength (MPa) was evaluated by two-way anova and Tukey test (α = 0.05), and wear profile was assessed by Kruskal-Wallis and t-tests (α = 0.05).

RESULTS

AH Plus had the highest bond strength values. Intermediate results were found in roots with MTA Fillapex and Endofill, whilst Sealapex had inferior results (P < 0.05). No significant differences were found amongst root thirds (P > 0.05). For wear profile, samples were associated with degradation of the filling materials after exposure to the oral environment (P < 0.05). Roots had signs of demineralization around the filling material when Sealapex and Endofill were used.

CONCLUSIONS

Sealers were not able to prevent degradation of the adhesive interface and dentine. AH Plus and MTA Fillapex had superior bond strength to dentine and less intense demineralization around the root filling.

Effect of different adhesive strategies on microtensile bond strength of computer aided design/computer aided manufacturing blocks bonded to dentin

Background:

The aim of this study was to determine the microtensile bond strength (μTBS) of ceramic and composite computer aided design-computer aided manufacturing (CAD-CAM) blocks bonded to dentin using different adhesive strategies.

Materials and Methods:

In this in vitro study, 30 crowns of sound freshly extracted human molars were sectioned horizontally 3 mm above the cementoenamel junction to produce flat dentin surfaces. Ceramic and composite CAD/CAM blocks, size 14, were sectioned into slices of 3 mm thick. Before bonding, CAD/CAM block surfaces were treated according to the manufacturer's instructions. Groups were created based on the adhesive strategy used: Group 1 (GI) - conventional resin cement + total-etch adhesive system, Group 2 (GII) - conventional resin cement + self-etch adhesive system, and Group 3 (GIII) - self-adhesive resin cement with no adhesive. Bonded specimens were stored in 100% humidity for 24h at 37΀C, and then sectioned with a slow-speed diamond saw to obtain 1 mm × 1 mm × 6 mm microsticks. Microtensile testing was then conducted using a microtensile tester. μTBS values were expressed in MPa and analyzed by one-way ANOVA with post hoc (Tukey) test at the 5% significance level.

Results:

Mean values and standard deviations of μTBS (MPa) were 17.68 (±2.71) for GI/ceramic; 17.62 (±3.99) for GI/composite; 13.61 (±6.92) for GII/composite; 12.22 (±4.24) for GII/ceramic; 7.47 (±2.29) for GIII/composite; and 6.48 (±3.10) for GIII/ceramic; ANOVA indicated significant differences among the adhesive modality and block interaction (P < 0.05), and no significant differences among blocks only, except between GI and GII/ceramic. Bond strength of GIII was consistently lower (P < 0.05) than GI and GII groups, regardless the block used.

Conclusion:

Cementation of CAD/CAM restorations, either composite or ceramic, can be significantly affected by different adhesive strategies used.

Fracture resistance and stress distribution of simulated immature teeth after apexification with mineral trioxide aggregate

AIM

To evaluate the effect of adhesive restorations on fracture resistance and stress distribution in teeth with simulated immature apices and apical plugs of mineral trioxide aggregate (MTA).

METHODOLOGY

Sixty bovine incisors were sectioned 8 mm above and 12 mm below the cemento-enamel junction (CEJ). The root canal was enlarged using a diamond bur, resulting in remaining root canal walls with 0.1-0.2 mm of thickness. A 5-mm apical plug of MTA was placed and the teeth were restored according to the following groups: GP--the root canal was filled with gutta-percha and endodontic sealer; CR--the root canal was filled with light-cured composite resin inserted incrementally; FP--a fibre post was cemented into the root canal; and RFP--the fibre post was relined with composite resin prior to the cementation into the root canal. A load was applied on the crown of all teeth at 135° to their long axis until fracture. Data was analysed by one-way anova and SNK tests (α = 0.05), whilst the fracture pattern was evaluated according to the position of the fracture. Stress distributions in the restored teeth were verified by finite element analysis.

RESULTS

Teeth restored with fibre posts and relined fibre posts were associated with the highest fracture resistance, whilst the GP group had the lowest values. GP and RC groups had similar fracture resistance values (P = 0.109). All fractures types involved the cervical and middle thirds of roots. The GP model had high levels of stress concentration in the cervical and middle thirds of roots. No difference was found amongst the stress concentration in the RC, FP and RFP models.

CONCLUSION

Restorative protocols alter the fracture resistance and stress distribution of immature teeth after placement of MTA apical plugs.

Detection of Root Canal Isthmuses in Molars by Map-Reading Dynamic using CBCT images

The aim of this study was to detect root isthmuses in maxillary and mandibular molars and evaluate their frequencies using map-reading dynamics in CBCT images. Two hundred extracted human maxillary and mandibular molars were used in ex vivo assay. A consecutive sample of two hundred maxillary and mandibular molars (first and second) was selected from CBCT exams. The isthmuses were detected from the pulp orifice to the apex and were recorded according to their beginning and their end, into categories: 1. begin and end in cervical third; 2. beginning in cervical third and end in middle third; 3. beginning in cervical third and end in apical third; 4. beginning and end in middle third; 5. begin in middle third and end in apical third; 6. beginning and end in apical third; 7. no isthmus. The scans were obtained in different planes with map-reading in axial slices of 0.5 mm/0.5 mm involved the coronal to apical direction. The frequencies of isthmus were analyzed according to the level of root and evaluated by Chi-square test. The level of significance was set at α=0.05. The presence of isthmus detected in maxillary molars was 86% in ex vivo assay and 62% in vivo assay, whereas in mandibular molars was observed 70% in ex vivo assay and 72% in vivo assay. The frequency of isthmus was high in both study models. The map-reading dynamics in CBCT images was found to be precise to detect the localization of isthmus.

Confocal microscopy assessment of filling material remaining on root canal walls after retreatment

AIM

The percentage of Endofill remaining on canal walls after retreatment with different techniques was evaluated using confocal microscopy and qualitative analysis of the interface between the filling material/dentine.

METHODOLOGY

Sixty-four root canals of incisors were prepared with ProTaper, filled with gutta-percha and Endofill mixed with 0.1% rhodamine B. The roots were thermocycled and distributed into groups according to the method of evaluation: GI - direct viewing (DV) and GII - operating microscope (OM) and according to the removal technique: A) ProTaper retreatment (PR), B) PR/xylol, C) ultrasound and D) ultrasound/xylol. The root canals were then refilled with gutta-percha and AH Plus with 0.1% fluorescein and sectioned at 2, 4 and 6 mm from the apex. The percentage of remaining Endofill was analysed by confocal microscopy. Additionally, 16 roots were prepared with a ProTaper F5 instrument and were filled with Endofill + 0.1% rhodamine B/gutta-percha (negative control group) (n = 8), and the positive control group (n = 8) were filled with AH Plus with 0.1% fluorescein/gutta-percha.

RESULTS

Three-way anova demonstrated differences in the method of evaluation, removal techniques and their interaction (P < 0.05). OM (26.15 ± 12.16%) had a smaller percentage of remaining sealer than DV (32.77 ± 14.47%). The Tukey's test revealed that ultrasound/xylol (15.77 ± 7.15%) led to lower percentages of remaining sealer, significantly different from the PR group (35.25 ± 13.63%), PR/xylol (33.03 ± 11.64%) and ultrasound (33.79 ± 11.71%), which were similar (P > 0.05). Qualitative analysis detected that ultrasound had lower remaining Endofill than PR, particularly when combined with xylol. Operating microscope resulted in lower residual sealer, regardless of the removal technique.

CONCLUSIONS

None of the protocols was associated with complete removal of the filling material; however, the use of ultrasound/xylol under an OM provided better results.

Push-out strength of root fillings with or without thermomechanical compaction

AIM

To evaluate the influence of thermomechanical compaction (Tagger's hybrid technique - THT) on the push-out strength of several root filling materials to root dentine.

METHODOLOGY

Root canals of eighty roots in human canines were prepared with the ProTaper system and filled with one of the following materials, using either lateral compaction (LC) (n = 40) or THT (n = 40): AH Plus/gutta-percha (GP) (n = 10), Sealer 26/GP (n = 10), Epiphany SE/Resilon (n = 10) and Epiphany SE/GP (n = 10). Three 2-mm-thick dentine slices were obtained from each third of each root. The root filling in the first slice was subjected to a push-out test to evaluate the bond strength of the materials to intraradicular dentine. Data (in MPa) were analysed using anova and post hoc Tukey's test (P < 0.05). Failure mode was determined at × 25 magnification. The other two slices were prepared for scanning electron microscopy (SEM) to examine the surface of the filling materials.

RESULTS

Lateral compaction (1.34 ± 1.14 MPa) was associated with a significantly higher bond strength (P < 0.05) than the THT (0.97 ± 0.88 MPa). AH Plus/GP (2.23 ± 0.83 MPa) and Sealer 26/GP (1.86 ± 0.50 MPa) had significantly higher bond strengths than the other materials and differed significantly from each other (P < 0.05). There was a significant difference (P < 0.05) between the coronal (1.36 ± 1.15 MPa), middle (1.14 ± 1.05 MPa) and apical thirds (0.95 ± 0.83 MPa). Considering the technique and root filling material interaction, AH Plus/GP-LC was associated with the highest mean values (2.65 ± 0.66 MPa) (P < 0.05). Sealer 26/GP-LC (2.10 ± 0.46 MPa), AH Plus/GP-THT (1.81 ± 0.78 MPa) and Sealer 26/GP-TH (1.63 ± 0.44 MPa) had intermediate values that were not significantly different from each other (P > 0.05). Epiphany SE was associated with the lowest mean values (3.70 ± 0.86 MPa) (P < 0.05), regardless of the root filling technique and type of solid material (cone). Adhesive failures predominated in the specimens filled with Epiphany SE, whilst mixed and cohesive failures were more frequent in those filled with AH Plus and Sealer 26, regardless of the root filling technique. SEM analysis revealed that LC produced a dense and well-compacted filling whilst the use of a hybrid thermomechanical technique resulted in the solid material (GP or Resilon) intermingled within sealer to form a nonhomogenous mass.

CONCLUSION

Lateral compaction was associated with higher bond strengths of the materials to intraradicular dentine than a hybrid technique using thermomechanical compaction. The greatest push-out strengths were obtained when the canals were filled with LC of AH Plus and GP cones.

Changes in the surface of four calcium silicate-containing endodontic materials and an epoxy resin-based sealer after a solubility test

AIM

To compare the changes in the surface structure and elemental distribution, as well as the percentage of ion release, of four calcium silicate-containing endodontic materials with a well-established epoxy resin-based sealer, submitted to a solubility test.

METHODOLOGY

Solubility of AH Plus, iRoot SP, MTA Fillapex, Sealapex and MTA-Angelus (MTA-A) was tested according to ANSI/ADA Specification 57. The deionized water used in the solubility test was submitted to atomic absorption spectrophotometry to determine and quantify Ca(2+), Na(+), K(+), Zn(2+), Ni(2+) and Pb(2+) ions release. In addition, the outer and inner surfaces of nonsubmitted and submitted samples of each material to the solubility test were analysed by means of scanning electron microscopy and energy-dispersive spectroscopy (SEM/EDX). Statistical analysis was performed by using one-way anova and Tukey's post hoc tests (α = 0.05).

RESULTS

Solubility results, in percentage, sorted in an increasing order were -1.24 ± 0.19 (MTA-A), 0.28 ± 0.08 (AH Plus), 5.65 ± 0.80 (Sealapex), 14.89 ± 0.73 (MTA Fillapex) and 20.64 ± 1.42 (iRoot SP). AH Plus and MTA-A were statistically similar (P > 0.05), but different from the other materials (P < 0.05). High levels of Ca(2+) ion release were observed in all groups except AH Plus sealer. MTA-A also had the highest release of Na(2+) and K(+) ions. Zn(+2) ion release was observed only with AH Plus and Sealapex sealers. After the solubility test, all surfaces had morphological changes. The loss of matrix was evident and the filler particles were more distinguishable. EDX analysis displayed high levels of calcium and carbon at the surface of Sealapex, MTA Fillapex and iRoot SP.

CONCLUSIONS

AH Plus and MTA-A were in accordance with ANSI/ADA's requirements regarding solubility whilst iRoot SP, MTA Fillapex and Sealapex did not fulfil ANSI/ADA's protocols. High levels of Ca(2+) ion release were observed in all materials except AH Plus. SEM/EDX analysis revealed that all samples had morphological changes in both outer and inner surfaces after the solubility test. High levels of calcium and carbon were also observed at the surface of all materials except AH Plus and MTA-A.

Laboratory evaluation of the physicochemical properties of a new root canal sealer based on Copaifera multijuga oil-resin

AIM

To compare a new root canal sealer based on Copaifera multijuga oil-resin (Biosealer) using three other established sealers (Sealer 26, Endofill and AH plus) in terms of their physicochemical properties.

METHODOLOGY

The study was carried out according to the requirements of Specification Number 57 of the American Dental Association (ADA) and consisted of the following tests: setting time, flow, film thickness, dimensional stability, radiopacity and solubility/disintegration. Data were analysed statistically using anova and Tukey's test for multiple comparisons. The significance level was set at 5% for all analyses.

RESULTS

Sealer 26 and AH Plus had the longest setting time (P < 0.05). All materials presented flow in with the ADA's guidelines. Regarding film thickness, Sealer 26 did not have a satisfactory performance, as it had a higher mean value than the maximum allowed by the ADA (0.05 mm), being significantly different from the other materials (P < 0.05), which had mean values for film thickness in accordance with the ADA's recommendations. Regarding the solubility and disintegration, only Endofill did not meet the ADA's specifications and presented the worst results of all materials (P < 0.05). Sealer 26 presented the greatest dimensional changes and differed significantly from all other sealers (P < 0.05). Biosealer had the lowest radiopacity values and was significantly different from the other sealers (P < 0.05).

CONCLUSION

The experimental sealer based on Copaifera multijuga oil-resin presented satisfactory results in the physicochemical tests required by the ADA.

Comparative study of the effect of ultrasound on the removal of intracanal posts

This study sought to evaluate how ultrasound affected the removal of stainless steel and titanium posts that had been attached with two different resin cements. The crowns of 32 maxillary canines were removed, the roots were embedded in acrylic resin blocks, and the canals were treated endodontically. The specimens were randomly distributed into two groups (n = 16) according to the brand of cement and subdivided (n = 8) according to the type of post. The specimens were submitted to ultrasonic vibration applied perpendicularly to the long axis of the tooth for 60 seconds. Data were submitted to ANOVA and showed no significant statistical difference among the groups (p > 0.05). It may be concluded that the effects of ultrasonic vibration used to remove intraradicular posts were not significantly different when applied to stainless steel or titanium posts cemented with chemically or dual-activated resin cements.

Ultrastructural evaluation of radicular dentin after Nd:YAG laser irradiation combined with different chemical substances

This aticle sought to evaluate the dentin morphology after irradiation by a Neodymium:Yttrium-Aluminum-Garnet (Nd:YAG) laser, using different chemical substances to irrigate radicular canals: distilled water, 17% ethylenediaminetetraacetic acid plus Cetavlon (EDTAC), 1% sodium hypochlorite, and 2% chlorhexidine. Groups were subdivided according to the protocol of laser application (n=9). The specimens were analyzed by scanning electron microscopy (SEM). No differences were found in dentin morphology when different root thirds were examined. Regardless of the chemical substance used, alterations were more evident in groups in which the surfaces were dried before laser irradiation. Fusion areas, craters, carbonization, and partially exposed tubules were verified. When the irradiation was performed in water, the smear layer was incorporated into the laser-modified surface. Among the specimens irrigated with EDTAC and laser-treated, partial obliteration of dentin tubules due to the laser action was verified; in addition, there was no remaining smear layer on the surfaces. Samples irrigated with sodium hypochlorite followed by laser irradiation demonstrated similar morphology to the samples in the chlorhexidine group, with some fusion areas present and no exposed dentin tubules or fissures. The irradiation from an Nd:YAG laser in the presence of EDTAC solution provided a more favorable surface pattern compared to the other experimental conditions, due to the removal of the contaminated layer and the posterior sealing of dentin tubules.

Influence of endodontic sealers on the bond strength of carbon fiber posts

OBJECTIVE

The aim of this study was to verify the influence of endodontic sealers on the bond strength of an adhesive system and a resin cement used for carbon posts cementation.

METHODS

Thirty extracted human premolars were instrumented and randomly divided into three groups according to the tested sealer: EndoFill, Sealapex, or EndoREZ. Specimens were stored at 37 degrees C. After 48 h, half of specimens were prepared to receive the post and the others after 7 days. The posts were cemented with Adper Single Bond/Rely X ARC and stored in distilled water at 37 degrees C for 7 days. After this period, the specimens were sectioned in three slices (coronal, middle, and apical). The push-out test was performed in a universal machine and the debonded area was examined in a stereomicroscope.

RESULTS

Data were submitted ANOVA and Tukey test (alpha = 0.05). The EndoFill showed lower bond strength than other sealers (p < 0.01). The EndoREZ sealer was statistically greater than other groups for coronal and middle portions and similar for apical portion (p > 0.05). Coronal and middle portions showed the best results for all groups, mainly when the canal preparation was performed after 48 h (p < 0.01). Mixed failure occurs with more frequency (55.6%) followed by failure in adhesive-dentin interface (34.4%) and adhesive-post interface (10.0%).

CONCLUSION

The use of EndoREZ sealer promoted higher bond strength in root coronal and middle portions when carbon post was fixed with a resin cement.

Removal of the smear layer from flattened canals using different chemical substances

This study used scanning electron microscopy to evaluate the flattened root canals of human mandibular incisors cleaned with nickel-titanium instruments and different chemical substances. Teeth were selected and divided randomly into five groups (n = 10) according to the chemical substances used in the biomechanical preparation: 5.25% sodium hypochlorite (Group 1), 5.25% sodium hypochlorite plus a final irrigation with 17% EDTAC (Group 2), EDTA gel combined with 5.25% sodium hypochlorite (Group 3), 2% chlorhexidine gel (Group 4), and 5.25% sodium hypochlorite combined with Glyde File Prep gel (Group 5). Data analysis showed a statistically significant difference (p < 0.001) among groups. Groups 1 and 5 were similar statistically (p > 0.001) and displayed a higher amount of smear layer on canal walls. Samples from Groups 2, 3, and 4 revealed root canal walls without smear layer and exposed dentin tubules. Among the associations tested in this study, 5.25% sodium hypochlorite solution combined with 17% EDTAC, 5.25% sodium hypochlorite combined with EDTA gel, and 2% chlorhexidine gel all were effective substances for removing the smear layer from flattened root canals.

Radiopacity of root filling materials using digital radiography

AIM

To evaluate radiopacity of root filling materials using digital radiography.

METHODOLOGY

The sealers tested were AH Plus, Endofill, EndoREZ and Epiphany. Gutta-percha (Dentsply Maillefer) and Resilon cones were also tested. Acrylic plates, containing six wells, measuring 1 mm in depth and 5 mm in diameter, were prepared for the test, and filled with the materials. The test samples were radiographed together with an aluminium stepwedge calibrated in millimetres, according to ANSI/ADA Specification 57. For the radiographic exposures, digital imaging plates and an X-ray machine at 70 kVp and 8 mA were used. The object-to-focus distance was 30 cm, and the exposure time, 0.2 s. After the laser optic reading process, the software determined the radiopacity of the standardized areas, using grey-scale values, calculating the average radiographic density for each material.

RESULTS

The decreasing values of radiopacity of the studied materials, expressed in millimetres of aluminium equivalent, were: Resilon (13.0), AH Plus(TM) (11.2), gutta-percha (9.8), Epiphany (8.0), Endofill (6.9) and EndoREZ (6.6).

CONCLUSION

All materials had radiopacity values above 3 mm of aluminium recommended by ANSI/ADA Specification 57.

Evaluation of root external temperature during the application of ultrasound in removal of intraradicular posts

This study evaluated the temperature rise on external root surfaces by simulating the removal of metallic posts by applying ultrasound, with or without refrigeration and at different times. The crowns of 30 healthy maxillary central incisors were removed and the roots were treated endodontically. The prosthetic spaces were prepared and impressions were taken with self-curing acrylic resin. After casting with a copper-aluminum alloy, the posts were blasted with aluminum oxide and cemented with resin cement. The specimens were randomly assigned to three groups according to the time of ultrasonic vibration (30, 60, or 120 seconds) and were subdivided into two groups, those cooled with and without water refrigeration. A thermocouple connected to a digital thermometer was positioned on the root external surface and the maximum temperature was recorded. Data were submitted to ANOVA and Tukey's test. Analysis of the results revealed statistical difference among groups (p < 0.01). Ultrasound (with and without water spray) increased root temperature significantly, reaching values of more than 50 degrees C. The exception was the group that used 30 seconds of ultrasound with refrigeration; root temperature reached 35.4 degrees C, making it the only tested condition that remained below the critical value (50 degrees C).

Autogenous transplantation of teeth with complete root formation: two case reports

AIM

Autotransplantation is an alternative treatment for replacing lost teeth when suitable donor teeth are available. This paper presents two cases of successful autogenous tooth transplantation.

SUMMARY

Two third molars with complete root development were autogenously transplanted from their original sockets into new recipient sites on the same side of the mouth, one in the maxilla and one in the mandible. In both cases, the third molars were transplanted immediately after the first molar extractions. To provide better adaptation of the donor teeth, the recipient alveolar sites were remodelled using surgical burs. Semi-rigid splints were maintained for 45 and 15 days, respectively. Root canal treatment commenced one a week after transplantation and the canals were medicated with a calcium hydroxide paste before they were filled. Clinical and radiographic findings after 5 and 3 years of follow-up, respectively, are discussed in relation to the literature.

KEY LEARNING POINTS

Autogenous transplantation of teeth with complete root formation may be considered as a viable treatment option to conventional prosthetic and implant rehabilitation for both therapeutic and economic reasons. Careful surgical and endodontic procedure, together with careful case selection may lead to satisfactory aesthetic and functional outcomes.

A comparative study of physicochemical properties of AH PlusTM and EpiphanyTM root canal sealants

AIM

To evaluate setting time, solubility and disintegration, flow, film thickness, and dimensional change following setting in a dual-cured resin root canal sealer Epiphany compared with an epoxy-resin-based sealer AH Plus.

METHODOLOGY

The experiments were performed according to ANSI/ADA Specification 57 which tests the physicochemical properties of endodontic sealing materials. Five samples of each material were tested for each of the properties. In addition, deionized distilled water from the solubility test of Epiphany was submitted for analysis of the cations Fe, Ni, Ca, Mg, Zn, Na, and K in an atomic absorption spectrometer. Three samples were analysed.

RESULTS

There were no statistical differences (P>0.05) in flow (AH Plus: 38.57 mm; Epiphany: 35.74 mm) and film thickness (AH Plus: 10.6 microm; Epiphany: 20.1 microm). The solubility (AH Plus: 0.21%; Epiphany: 3.41%) and dimensional alterations following setting (AH Plus: expansion of 1.3%; Epiphany: expansion of 8.1%) were statistically different (P<0.05). The setting times of both sealants were in accordance with ANSI/ADA requirements.

CONCLUSIONS

Setting time, flow, and film thickness tests for both cements conformed to ANSI/ADA standards. Dimensional alteration test for both cements were greater than values considered acceptable by ANSI/ADA. Epiphany values regarding solubility were also greater than values considered acceptable by ANSI/ADA.

Ex vivo study of the adhesion of an epoxy-based sealer to human dentine submitted to irradiation with Er : YAG and Nd : YAG lasers

AIM

To evaluate the adhesion of an epoxy-based sealer to human dentine submitted to irradiation with Er : YAG or Nd : YAG laser at various parameters.

METHODOLOGY

Ninety maxillary canine teeth were sectioned transversely at the cemento-enamel junction and at the root tip to leave an 8-mm-long cylinder. The tooth specimen was centred in a metallic ring (16 mm diameter and 8 mm height) and embedded in acrylic resin. The root canals were prepared using a low-speed handpiece and a conical diamond bur, which was attached to a paralleling device. This bur was lowered to a depth previously determined by a silicone stop. Specimens were divided into nine groups: group I, dentine was treated with 2 mL of 17% EDTAC for 5 min. Groups II-V were irradiated with Er : YAG laser at the following parameters: group II - 8 Hz and 200 mJ input (120 mJ output); group III - 8 Hz and 400 mJ input (240 mJ output); group IV - 16 Hz and 200 mJ input (120 mJ output); group V - 16 Hz and 400 mJ input (240 mJ output). Groups VI-IX were irradiated with Nd : YAG laser at the following parameters: group VI - 10 Hz and 1 W input (0.4 W output); group VII - 10 Hz and 2 W input (0.8 W output); group VIII - 15 Hz and 1 W input (0.4 W output); group IX - 15 Hz and 2 W input (0.8 W output). The root canals were filled with an epoxy-based root canal sealer and submitted to a push-out test.

RESULTS

Statistical analysis showed significant differences (P < 0.01) between Er : YAG and Nd : YAG laser treatments at the higher frequencies compared with 17% EDTAC. Greater adhesion values were obtained for groups IV and V (Er : YAG laser) and groups VIII and IX (Nd : YAG laser), which were statistically different from groups II and III (Er : YAG laser) and groups VI and VII (Nd : YAG laser). Treatment with only 17% EDTAC had the lowest adhesion values.

CONCLUSIONS

An increase in frequency, independent of power settings, of the lasers used in this study increased adhesion of an epoxy-based root canal sealer.

In vitro evaluation of the effect of core diameter for removing radicular post with ultrasound

The removal of radicular posts for endodontic reasons as well as their replacement is a common procedure in dental practice. The use of ultrasound is becoming a standard practice since it reduces the stress to displace the core from the canal minimizing the risks of root fractures, perforations and further wearing of dental structure. Thus, the objective of this study was to evaluate the effect of a reduction in the core diameter when removing radicular posts with ultrasound. Twenty-four teeth were divided in two groups. Group I received posts with the dowel and core of the same diameter (1.7 mm) and group II received posts with the dowel diameter 2 mm larger (3.7 mm) than the core diameter. Zinc phosphate cement was used to cement the posts in all groups. Half of the samples of each group received ultrasonic energy for 8, 2 min for each face. All samples were submitted to traction on an Instron machine (model 4444). Data were analysed statistically with anova and the Tukey test, revealing significant differences (P < 0.05) between groups. The authors concluded that the mean tension necessary to displace the posts from the roots was reduced by 26% when ultrasound was applied. The reduction of the post-diameter reduced the necessary tension to remove them by 24% compared with larger posts.

Adhesion of a glass-ionomer root canal sealer to human dentine

This in vitro study evaluated the effect of smear layer removal on adhesion to human dentine of Ketac-Endo, Grossman, and Sealer 26 root canal sealers. A total of 60 extracted human maxillary and mandibular molars with their crowns ground flat were used. The teeth were divided into two groups: Group 1, the dentine surface received no treatment; Group 2, EDTA-C was applied to the dentine surface for 5 min. Ten samples were tested for each sealer and each group. Adhesion was measured with a Universal Testing Machine. Sealer 26 showed greater adhesion both with and without smear layer (p < 0.01). Ketac-Endo and Grossman sealers were statistically equal, having the lowest values of adhesion. Application of EDTA-C did not alter the adhesion of Ketac-Endo and Grossman sealers. However, the use of EDTA-C increased the adhesion of Sealer 26. The epoxy resin-based root canal sealer (Sealer 26) adhered better to dentine prepared with and without EDTA-C than glass-ionomer-based sealers and the zinc oxide eugenol-based (Ketac-Endo and Grossman) sealers.

Clinical and macroscopic study of maxillary molars with two palatal roots

AIM

To report an anatomical variation in maxillary first molars.

SUMMARY

A case report is presented of a maxillary first molar requiring root-canal treatment that had two palatal roots with distinct canals and foramena at the apical level. Root-canal treatment was performed using mechanical instrumentation with NiTi files. An anatomical study on two extracted maxillary second molars with the same variation revealed their internal structure. This case demonstrates an uncommon anatomical condition and supplements previous reports of such cases affecting maxillary molars.

KEY LEARNING POINTS

Clinicians should be aware of uncommon anatomical variations in maxillary molars. The majority of maxillary first molars have three roots and four canals. Maxillary molars may have two canals in the palatal root.

Clinical aspects of pulpal-periodontal lesions

It is well known that the main purpose of dentistry is to keep teeth in the oral cavity so that they may fulfill their various roles. This case report demonstrates a method to treat a situation involving a pulpal-periodontal lesion, by using a simple and efficient combined therapy. The clinician can thereby determine the cause of the lesion (pulpal and/or periodontal) and subsequently establish the correct treatment, thus improving the prognosis of the case.

Dental anomaly: dens evaginatus (talon cusp)

Dens evaginatus is a developmental anomaly characterized by the occurrence of an extra cusp shaped as a tubercle projecting from the palatal or buccal surfaces (talon cusp). In the anterior dentition, dens evaginatus is more commonly found in the maxilla and on the palatal surface of the tooth. The authors present a case of dens evaginatus in a maxillary central incisor, in which the evagination was removed and routine endodontic treatment was performed.

Evaluation of Er:YAG laser and EDTAC on dentin adhesion of six endodontic sealers

The effect of Er:YAG laser application and EDTAC on the adhesion of epoxy resin-based endodontic sealers to human dentin was evaluated in vitro. A total of 99 extracted human maxillary molars with their crowns worn flat were used. The teeth were divided into 3 groups: group 1, the dentin surface received no treatment; group 2, EDTAC was applied to the dentin surface for 5 min; group 3, the dentin surface received Er:YAG laser application (2.25 W potency; 11 mm focal distance; 4 Hz frequency; 200 mJ energy; 62 J total energy; 313 mean impulse). Three teeth from each group were analyzed by scanning electron microscopy for changes in dentin surface. The epoxy resin root canal sealers used were: AH Plus, Topseal, Sealer 26, AH 26, and Sealer Plus. The zinc oxide eugenol-based sealer Fillcanal was used as control. Adhesion was measured with a Universal testing machine. The results showed a statistically significant difference at the level of 1% among the dentin treatments. The dentin treated with Er:YAG laser showed greater adhesion with the sealers than dentin treated with EDTAC which was greater than dentin that received no treatment. The Tukey test showed the formation of 5 groups in decreasing order of adhesion: AH Plus, Topseal and Sealer 26, AH 26, Sealer Plus, and Fillcanal (Grossman cement).

Modeling capacity of ENDOflash files in simulated root canals

With the development of rotary nickel-titanium files and their applications in Endodontics, the concepts of root canal preparation have changed. The objective of this research is to evaluate the transportation of simulated root canals caused by stainless steel ENDOflash rotary files compared to nickel-titanium ProFile files (.04, .06 and Orifice Shapers). Twenty-four simulated root canals with a 30 degrees curvature were randomly divided into 2 groups and prepared with ENDOflash or ProFile files according to manufacturers' instructions. Comparison between the simulated root canals before and after instrumentation showed significant differences (p < 0.001) between the groups, with greater transportation observed with ENDOflash files. One case of deformation was observed with a ProFile instrument (#20/.04) and there were no fractures.

Evaluation of the effect of EDTAC, CDTA, and EGTA on radicular dentin microhardness

The effect of EDTAC (ethylenediamine tetra-acetic acid plus Cetavion, an ammonium surfactant), CDTA (cyclohexane-1,2-diaminetetra-acetic acid), and EGTA (ethylene glycol-bis-(beta-amino-ethyl ether) N,N,N',N'-tetra-acetic acid) on the microhardness of radicular dentin of the cervical third of human teeth was studied. Five newly extracted maxillary incisors were sectioned transversely at the cementoenamel junction, and the crowns were discarded. The roots were embedded in blocks of high-speed polymerized acrylic resin and cut transversely into 1-mm sections. The second slice of the cervical third of the root of each tooth was sectioned and divided into four parts. Each part was placed on an acrylic disc that was used as a base for microhardness measurement. Fifty microliters of 15% EDTAC, 1% CDTA, or 1% EGTA were applied to the dentin surface. Deionized and distilled water was used as control. Dentin microhardness was then measured with a Vicker's microhardness apparatus with a load of 50 g for 15 s. Statistical analysis showed that the three chelating solutions significantly reduced dentin microhardness when compared with water; however, there was no statistically significant difference among the three solutions.

Periapical cemental dysplasia: case report

The authors present a case of periapical cemental dysplasia affecting the mandibular left canine, with vital pulp, in a 43-year-old black female patient, an occurrence that follows the classical cases found in the literature. The need of a careful history, clinical and radiographic exams and vitality tests are emphasized in order to reach the correct diagnosis of this disease.

Treatment Of Middle-Apical Level Root Fracture In Necrotic Teeth

The purpose of this paper is to present two case reports of dental trauma with middle-apical level root fractures and pulp necrosis. The treatment consisted of programmed applications of calcium hydroxide until a calcified barrier was formed at the fracture level. The technique presented here proved efficient in treating horizontal fractures at the middle and apical thirds of the root.

Effect of different grades of gum rosins and hydrogenated resins on the solubility, disintegration, and dimensional alterations of Grossman cement

In the present study, we investigated the effect of the addition of different grades of gum rosins and hydrogenated resins to Grossman cement on dimensional stability, solubility and disintegration. pH and conductivity, which may affect these properties, were also determined. The experiments were performed according to Specification 57 of the American Dental Association for root canal cements using Grossman cements containing three gum rosins (grades X, WW, and WG) and two hydrogenated resins (Staybelite and Staybelite ester 10). The results showed that the solubility, disintegration, and dimensional stability of Grossman cement containing Staybelite and Staybelite ester 10 were inferior to the values considered acceptable by the American Dental Association Specification 57.