Status of Sleep Apnea and Snoring Disorder Curriculum in U.S. Advanced Education Prosthodontic Programs

PURPOSE

To assess the management of sleep apnea and snoring disorders in Advanced Education Programs in Prosthodontics (AEPP) in the United States.

MATERIALS AND METHODS

A 51 item, online survey was sent to program directors at 48 AEPPs in the United States in 2015. Data results were analyzed descriptively.

RESULTS

Thirty-five program directors responded to the survey. Twenty-four (68.6%, N = 35) programs report not having a dedicated course for the treatment of sleep apnea and snoring disorders. The majority (94.3%) of programs chose to treat sleep disordered breathing with oral appliance therapy and 80.0% (N = 35) of programs utilize customized sleep apnea oral devices. However, only 48.6% (N = 35) and 51.4% (N = 35) of programs regularly address sleep apnea and snoring disorders at initial examination during the comprehensive exam and medical history questionnaire, respectively.

CONCLUSIONS

The confidence interval for this survey is 8.71 at a confidence level of 95% due to a response rate of 72.9%. This confidence interval suggests there is responder bias in the survey results. Therefore, the results of this survey provide a suggestion of how sleep disorders are managed in AEPPs. Programs appear to be consistent among each other with regards to treatment modalities for sleep disordered breathing. The results suggest that patients are not screened enough to receive treatment addressing sleep disorders.

Wear and Corrosion Interactions at the Titanium/Zirconia Interface: Dental Implant Application

PURPOSE

Dental implants have been shown to have predictable success, but esthetic complications often arise. To reduce tissue shadowing from titanium, zirconia abutments may be used; however, the literature suggests that the use of zirconia leads to greater destruction of the implant interface that may result in biological complications such as titanium tattoos and heavy metal toxicity. Previous studies have examined the mechanical aspects of this implant/abutment relationship, but they have not accounted for the corrosive degradation that also takes place in the dynamic environment of the oral cavity. This study investigated the combined effect of both wear and corrosion on the materials at the implant and abutment interface.

MATERIALS AND METHODS

Using a simulated oral tribocorrosive environment, titanium (Ti) and zirconia (Zr) abutment materials were slid against titanium and Roxolid implant alloys. The four couplings (Ti/Ti, Ti/Rox, Zr/Ti, Zr/Rox) were selected for the tribocorrosion tests (N = 3). The testing was conducted for 25K cycles, and the coefficient of friction (CoF) and voltage evolution were recorded simultaneously. Following the tribocorrosion assays, the wear volume loss was calculated, and surface characterization was performed. Statistical analysis was completed using a one-way ANOVA followed by post-hoc Bonferroni comparisons.

RESULTS

Zr/Ti groups had the highest CoF (1.1647), and Ti/Ti had the lowest (0.5033). The Zr/Ti coupling generated significantly more mechanical damage than the Ti/Ti group (p = 0.021). From the corrosion aspect, the Ti/Ti groups had the highest voltage drop (0.802 V), indicating greater corrosion susceptibility. In comparison, the Zr/Roxolid group had the lowest voltage drop (0.628 V) and significantly less electrochemical degradation (p = 0.019). Overall, the Ti/Ti group had the largest wear volume loss (15.1 × 10⁷ μm³ ), while the Zr/Ti group had the least volume loss (2.26 × 10⁷ μm³ ). Both zirconia couplings had significantly less wear volume than the titanium couplings (p < 0.001).

CONCLUSIONS

This study highlights the synergistic interaction between wear and corrosion, which occurs when masticatory forces combine with the salivary environment of the oral cavity. Overall, the zirconia groups outperformed the titanium groups. In fact, the titanium groups generated 5 to 6 times more wear to the implant alloys as compared with the zirconia counterparts. The best performing group was Zr/Ti, and the worst performing group was Ti/Ti.

Effect of brushing and thermocycling on the shade and surface roughness of CAD-CAM ceramic restorations

STATEMENT OF PROBLEM

The effects of toothbrushing (B) and thermocycling (TC) on the surface texture of different materials with various fabrication processes have been investigated. However, studies of computer-aided design and computer-aided manufacturing (CAD-CAM) ceramic restorations are limited.

PURPOSE

The purpose of this in vitro study was to evaluate the effect of B and TC on the color stability and surface roughness of extrinsically characterized and glazed CAD-CAM ceramic restorations.

MATERIAL AND METHODS

Lithium disilicate CAD ceramic (n=90) and zirconia ceramic (n=90) were studied. All specimens were crystallized/sintered, characterized, and glazed following the manufacturer's recommendation. The specimens were divided into 9 different groups: B, TC, and a combination of B plus TC (B+TC). Brushing was performed at 50 000, 100 000, and 150 000 cycles, simulating an oral environment of 5, 10, and 15 years. Thermocycling was performed at 6000, 12 000, and 18 000 cycles, simulating an oral environment of 5, 10, and 15 years. Brushing plus TC was performed with the combination of the 50 000 cycles of B, then 6000 cycles of TC, and 10 000 cycles of B, then 12 000 cycles of TC, and 15 000 cycles of B, then 18 000 cycles of TC. The color and surface roughness of each specimen were measured before and after all interventions with simulated cycles. Color differences (ΔE) and surface roughness (ΔR_a) data were analyzed using 2-way ANOVA, followed by the least significant difference test (α=.05). The correlation between ΔE and ΔR_a was statistically analyzed using the Pearson correlation analysis.

RESULTS

Within the lithium disilicate CAD groups, intervention did not result in any significant differences in color change (P>.05). Within the zirconia groups, a 15-year clinical simulation revealed significantly higher ΔE values than a simulated 5-year exposure (P=.017). Increased simulated cycles showed significantly higher R_a values for all groups. Within the zirconia groups, B revealed significantly smoother surfaces than TC (P<.001) and B+TC interventions (P<.001). For the zirconia, simulating B+TC for15 years revealed significantly higher R_a values than the groups of B+TC for 5 years (P<.001) and B+TC for 10 years (P=.003). No correlation (lithium disilicate CAD, r=.079; P=.462; zirconia, r=.001; P=.989) was found between the color change and surface roughness.

CONCLUSIONS

For both lithium disilicate CAD and zirconia, color changes were below the selected clinical perceptible threshold (ΔE=2.6) after all intervention and simulated cycles. All mean surface roughness measurements were below 0.2 μm. Generally, the surface of both lithium disilicate CAD and zirconia became rougher. No correlation was found between color difference and surface roughness for either material.

Integration of Digital Dentistry into a Predoctoral Implant Program: Program Description, Rationale, and Utilization Trends

A recently revised predoctoral implant curriculum at the University of Illinois at Chicago College of Dentistry integrated digital dentistry into both the preclinical dental implant course and clinical activities. Traditionally, competence in the didactic and clinical parts of predoctoral education in single tooth implant restorations has emphasized the analog impression technique and subsequent mounting of soft tissue working casts. However, computer-aided design/computer-aided manufacturing (CAD/CAM) implant restorations can play a significant role in predoctoral dental education utilizing digital technologies. The goal of the curriculum expansion is to transition from analog to partially digital and, finally, complete digital workflow. The aim of this article is to describe the specific components, implementation, and rationale for the new digitally integrated implant curriculum and present short-term clinical utilization trends.

Effect of C-fiber-mediated, ozone-induced rapid shallow breathing on airway epithelial injury in rats

We examined the relationship between C-fiber-mediated, ozone-induced rapid shallow breathing and airway epithelial cell injury at different airway sites within the lower respiratory tract of conscious Wistar rats (n = 24). We combined an acute 8-h ozone inhalation with vagal perineural capsaicin treatment, a selective C-fiber conduction block, and 5-bromo-2'-deoxyuridine (BrdU) labeling as an index of epithelial injury. Vehicle-treated rats that inhaled ozone developed a rapid shallow breathing pattern during ozone inhalation, whereas the capsaicin-treated rats that inhaled ozone showed no changes in respiratory frequency. In vehicle-treated, ozone-exposed rats that developed rapid shallow breathing, a progressive increase in BrdU-labeling density (no. of BrdU-labeled cells/mm(2) airway) was observed starting at the bifurcation of the left main stem bronchi (central airway) and going down either a short or long airway path. In vehicle-treated, ozone-exposed rats, terminal bronchioles supplied by short and long airway paths had a similar degree of BrdU-labeling density that was significantly (P < 0.05) greater than the BrdU-labeling density of the proximal airways that supply them. In contrast, the attenuation of rapid shallow breathing produced by capsaicin treatment resulted in a significantly reduced BrdU-labeling density in the terminal bronchioles supplied by short airway paths compared with the terminal bronchioles supplied by long airway paths. Our data indicate that ozone-induced rapid shallow breathing protects large conducting airways while producing a more even distribution of injury to terminal bronchioles.