Rapid multi-attribute characterization of intact bispecific antibodies by a microfluidic chip-based integrated icIEF-MS technology

Rapid, direct identification and quantitation of protein charge variants, and assessment of critical quality attributes with high sensitivity are important drivers required to accelerate the development of biotherapeutics. We describe the use of an enhanced microfluidic chip-based integrated imaged capillary isoelectric focusing-mass spectrometry (icIEF-MS) technology to assess multiple quality attributes of intact antibodies in a single run. Results demonstrate comprehensive detection of multiple charge variants of an aglycosylated knob-into-hole bispecific antibody. Upfront, on-chip separation by icIEF coupled to MS provides the orthogonal separation required to resolve and identify acidic posttranslational modifications including difficult-to-detect deamidation and glycation events at the intact protein level. In addition, on-chip UV detection enables pI determination and relative quantitation of charge isoforms. Six charge variant peaks were resolved by icIEF, mobilized toward the on-chip electrospray tip and directly identified by in-line icIEF-MS using a connected quadrupole time-of-flight mass spectrometer. In addition to acidic charge variants, basic variants were identified as C-terminal lysine, N-terminal cyclization, proline amidation, and the combination of modifications (not typically identified by other intact methods), including lysine and one or two hexose additions. Nonspecific chain cleavages were also resolved, along with their acidic charge variants, demonstrating highly sensitive and comprehensive intact antibody multi-attribute characterization within a 15-min run time.

Evaluation of an icIEF-MS system for comparable charge variant analysis of biotherapeutics with rapid peak identification by mass spectrometry

Protein therapeutics are usually produced in heterogeneous forms during bioproduction and bioprocessing. Heterogeneity results from post‐translational modifications that can yield charge variants and require characterization throughout product development and manufacturing. Isoelectric focusing (IEF) with UV detection is one of the most common methods to evaluate protein charge heterogeneity in the biopharmaceutical industry. To identify charge variant peaks, a new imaged microfluidic chip‐based isoelectric focusing (icIEF) system coupled directly to mass spectrometry was recently reported. Bridging is required to demonstrate comparability between existing and new technology. As such, here we demonstrate the comparability of the pI value measurement and relative charge species distributions between the icIEF‐MS system and the control data from a frequently utilized methodology in the biopharmaceutical industry for several blinded development‐phase biopharmaceutical monoclonal antibodies across a wide pI range of 7.3–9.0. Hyphenation of the icIEF system with mass spectrometry enabled direct and detailed structural determination of a test molecule, with masses suggesting acidic and basic shifts are caused by sialic acid additions and the presence of unprocessed lysine residues. In addition, MS analysis further identified several low‐abundance glycoforms. The icIEF‐MS system provides sample quantification, characterization, and identification of mAb proteoforms without sacrificing icIEF quantification comparability or speed.

Morphologically compatible mass spectrometric analysis of lipids in cytological specimens

INTRODUCTION

Modern lipid analysis requires mass spectrometric techniques, though to date these have been developed and applied primarily to histological serial sections. As such, there has been little emphasis on using mass spectrometry in such a way that the same specimen can yield both chemical and morphological information. Here, we present a mass spectrometric method that enables measurement of lipids from cells on cytospin slides in a way that preserves the cells for subsequent cytomorphologic evaluation.

MATERIALS AND METHODS

Standardized cultures of MDA-MB-231, a breast cancer cell line, were prepared as cytospins and subjected to analysis using a Prosolia Flowprobe sampling and ionization source attached to a Thermo Scientific Quadrupole-Orbitrap mass spectrometer. Chemical compositions were deduced with accurate mass measurements and fragmentation of high intensity peaks to further determine chemical structure. After mass spectrometry, the slides were stained and cover-slipped, and the cells were reviewed for cytomorphologic features of breast cancer. These were compared to control slides of the same cellular concentration that had not been subjected to this analysis.

RESULTS

Spectra from samples of all cellular concentrations demonstrated characteristic qualitative features that were discovered to represent phosphatidylcholines, phosphatidylglycerols, and phosphatidylserines with fragmentation and accurate mass matching. Cytomorphologic analysis demonstrated excellent preservation of the cells subjected to the Flowprobe analysis.

CONCLUSION

Direct extraction, ionization, and identification of lipids is possible from cytologic preparations in such a way that the analyzed material is preserved and useful for subsequent microscopic analysis.

Millisecond Kinetics of Nanocrystal Cation Exchange Using Microfluidic X-ray Absorption Spectroscopy

We describe the use of a flow-focusing microfluidic reactor to measure the kinetics of the CdSe-to-Ag2Se nanocrystal cation exchange reaction using micro-X-ray absorption spectroscopy (microXAS). The small microreactor dimensions facilitate the millisecond mixing of CdSe nanocrystals and Ag+ reactant solutions, and the transposition of the reaction time onto spatial coordinates enables the in situ observation of the millisecond reaction using microXAS. Selenium K-edge absorption spectra show the progression of CdSe nanocrystals to Ag2Se over the course of 100 ms without the presence of long-lived intermediates. These results, along with supporting stopped-flow absorption experiments, suggest that this nanocrystal cation exchange reaction is highly efficient and provide insight into how the reaction progresses in individual particles. This experiment illustrates the value and potential of in situ microfluidic X-ray synchrotron techniques for detailed studies of the millisecond structural transformations of nanoparticles and other solution-phase reactions in which diffusive mixing initiates changes in local bond structures or oxidation states.

Detection of four oxidation sites in viral prolyl-4-hydroxylase by top-down mass spectrometry

Oxidative inactivation is a common problem for enzymatic reactions that proceed via iron oxo intermediates. In an investigation of the inactivation of a viral prolyl-4-hydroxylase (26 kD), electrospray mass spectrometry (MS) directly shows the degree of oxidation under varying experimental conditions, but indicates the addition at most of three oxygen atoms per molecule. Thus, molecular ion masses (M + nO) of one sample indicate the oxygen atom adducts n = 0, 1, 2, 3, and 4 of 35, 41, 19, 5 +/- 3, and <2%, respectively; "top-down" MS/MS of these ions show oxidation at the sites R(28)-V(31), E(95)-F(107), and K(216) of 22%, 28%, and 34%, respectively, but with a possible (approximately 4%) fourth site at V(125)-D(150). However, for the doubly oxidized molecular ions (increasing the precursor oxygen content from 0.94 to 2), MS/MS showed an easily observable approximately 13% oxygen at the V(125)-D(150) site. For the "bottom-up" approach, detection of the approximately 4% oxidation at the V(125)-D(150) site by MS analysis of a proteolysis mixture would have been very difficult. The unmodified peptide containing this site would represent a few percent of the proteolysis mixture; the oxidized peptide not only would be just approximately 4% of this, but the uniqueness of its mass value (approximately 1-2 kD) would be far less than the 11,933 Dalton value used here. Using different molecular ion precursors for top-down MS/MS also provides kinetic data from a single sample, that is, from molecular ions with 0.94 and 2 oxygens. Little oxidation occurs at V(125)-D(150) until K(216) is oxidized, suggesting that these are competitively catalyzed by the iron center; among several prolyl-4-hydroxylases the K(216), H(137), and D(139) are conserved residues.

Top down characterization of larger proteins (45 kDa) by electron capture dissociation mass spectrometry

The structural characterization of proteins expressed from the genome is a major problem in proteomics. The solution to this problem requires the separation of the protein of interest from a complex mixture, the identification of its DNA-predicted sequence, and the characterization of sequencing errors and posttranslational modifications. For this, the "top down" mass spectrometry (MS) approach, extended by the greatly increased protein fragmentation from electron capture dissociation (ECD), has been applied to characterize proteins involved in the biosynthesis of thiamin, Coenzyme A, and the hydroxylation of proline residues in proteins. With Fourier transform (FT) MS, electrospray ionization (ESI) of a complex mixture from an E. coli cell extract gave 102 accurate molecular weight values (2-30 kDa), but none corresponding to the predicted masses of the four desired enzymes for thiamin biosynthesis (GoxB, ThiS, ThiG, and ThiF). MS/MS of one ion species (representing approximately 1% of the mixture) identified it with the DNA-predicted sequence of ThiS, although the predicted and measured molecular weights were different. Further purification yielded a 2-component mixture whose ECD spectrum characterized both proteins simultaneously as ThiS and ThiG, showing an additional N-terminal Met on the 8 kDa ThiS and removal of an N-terminal Met and Ser from the 27 kDa ThiG. For a second system, the molecular weight of the 45 kDa phosphopantothenoylcysteine synthetase/decarboxylase (CoaBC), an enzyme involved in Coenzyme A biosynthesis, was 131 Da lower than that of the DNA prediction; the ECD spectrum showed that this is due to the removal of the N-terminal Met. For a third system, viral prolyl 4-hydroxylase (26 kDa), ECD showed that multiple molecular ions (+98, +178, etc.) are due to phosphate noncovalent adducts, and MS/MS pinpointed the overall mass discrepancy of 135 Da to removal of the initiation Met (131 Da) and to formation of disulfide bonds (2 x 2 Da) at C32-C49 and C143-C147, although 10 S-S positions were possible. In contrast, "bottom up" proteolysis characterization of the CoaBC and the P4H proteins was relatively unsuccessful. The addition of ECD substantially increases the capabilities of top down FTMS for the detailed structural characterization of large proteins.