One-year post-exposure assessment of 14C-few-layer graphene biodistribution in mice: single versus repeated intratracheal administration

Research on graphene-based nanomaterials has experienced exponential growth in the last few decades, driven by their unique properties and their future potential impact on our everyday life. With the increasing production and commercialization of these materials, there is significant interest in understanding their fate in vivo. Herein, we investigated the distribution of 14C-few-layer graphene (14C-FLG) flakes (lat. dim. ∼ 500 nm) in mice over a period of one year. Furthermore, we compared the effects of repeated low-dose and acute high-dose exposure by tracheal administration. The results showed that most of the radioactivity was found in the lungs in both cases, with longer elimination times in the case of acute high-dose administration. In order to gain deeper insights into the distribution pattern, we conducted ex vivo investigations using μ-autoradiography on tissue sections, revealing the heterogeneous distribution of the material following administration. For the first time, μ-autoradiography was used to conduct a comprehensive investigation into the distribution and potential presence of FLG within lung cells isolated from the exposed lungs. The presence of radioactivity in lung cells strongly suggests internalization of the 14C-FLG particles. Overall these results show the long-term accumulation of the material in the lungs over one year, regardless of the administration protocol, and the higher biopersistence of FLG in the case of an acute exposure. These findings highlight the importance of the exposure scenario in the context of intratracheal administration, which is of interest in the evaluation of the potential health risks of graphene-based nanomaterials.

Determination of carbon nanotubes concentration by tabletop dynamic susceptometer

Carbon nanotubes (CNTs) can be incorporated in various materials to enhance their mechanical or electrical properties. Information on their precise concentration and local distribution is difficult to access non-invasively. For example, electron microscopy studies require cutting of samples. Another way to measure the concentration of CNTs is by the magnetic susceptibility of the ferrocene present in the CNTs by the synthesis process, which can be performed on sample coupons on a vibrating sample magnetometer (VSM); VSM is a bulky laboratory instrument, and the size of the samples studied is constrained. In order to provide a technique that is fast, easy, cheap, and adaptable to the size of the samples, we have developed a benchtop device that measures the CNT concentration through an original inductive dynamic measurement of the ferrocene magnetic susceptibility. We present the method for extracting CNT concentrations and show the results obtained on cement matrices with CNT concentrations of the order of a few percent.

Correlative radioimaging and mass spectrometry imaging: a powerful combination to study 14C-graphene oxide in vivo biodistribution

Research on graphene based nanomaterials has flourished in the last decade due their unique properties and emerging socio-economic impact. In the context of their potential exploitation for biomedical applications, there is a growing need for the development of more efficient imaging techniques to track the fate of these materials. Herein we propose the first correlative imaging approach based on the combination of radioimaging and mass spectrometry imaging for the detection of Graphene Oxide (GO) labelled with carbon-14 in mice. In this study, ¹⁴C-graphene oxide nanoribbons were produced from the oxidative opening of ¹⁴C-carbon nanotubes, and were then intensively sonicated to provide nano-size ¹⁴C-GO flakes. After Intravenous administration in mice, ¹⁴C-GO distribution was quantified by radioimaging performed on tissue slices. On the same slices, MS-imaging provided a highly resolved distribution map of the nanomaterial based on the detection of specific radical anionic carbon clusters ranging from C2˙^- to C9˙^- with a base peak at m/z 72 (¹²C) and 74 (¹⁴C) under negative laser desorption ionization mass spectrometry (LDI-MS) conditions. This proof of concept approach synergizes the strength of each technique and could be advantageous in the pre-clinical development of future Graphene-based biomedical applications.

Safe-by-design strategies for lowering the genotoxicity and pulmonary inflammation of multiwalled carbon nanotubes: Reduction of length and the introduction of COOH groups

Potentially, the toxicity of multiwalled carbon nanotubes (MWCNTs) can be reduced in a safe-by-design strategy. We investigated if genotoxicity and pulmonary inflammation of MWCNTs from the same batch were lowered by a) reducing length and b) introducing COOH-groups into the structure. Mice were administered: 1) long and pristine MWCNT (CNT-long) (3.9 μm); 2) short and pristine CNT (CNT-short) (1 μm); 3) CNT modified with high ratio COOH-groups (CNT-COOH-high); 4) CNT modified with low ratio COOH-groups (CNT-COOH-low). MWCNTs were dosed by intratracheal instillation at 18 or 54 μg/mouse (∼0.9 and 2.7 mg/kg bw). Neutrophils numbers were highest after CNT-long exposure, and both shortening the MWCNT and addition of COOH-groups lowered pulmonary inflammation (day 1 and 28). Likewise, CNT-long induced genotoxicity, which was absent with CNT-short and after introduction of COOH groups. In conclusion, genotoxicity and pulmonary inflammation of MWCNTs were lowered, but not eliminated, by shortening the fibres or introducing COOH-groups.

Dispersion of Nanomaterials in Aqueous Media: Towards Protocol Optimization

The sonication process is commonly used for de-agglomerating and dispersing nanomaterials in aqueous based media, necessary to improve homogeneity and stability of the suspension. In this study, a systematic step-wise approach is carried out to identify optimal sonication conditions in order to achieve a stable dispersion. This approach has been adopted and shown to be suitable for several nanomaterials (cerium oxide, zinc oxide, and carbon nanotubes) dispersed in deionized (DI) water. However, with any change in either the nanomaterial type or dispersing medium, there needs to be optimization of the basic protocol by adjusting various factors such as sonication time, power, and sonicator type as well as temperature rise during the process. The approach records the dispersion process in detail. This is necessary to identify the time points as well as other above-mentioned conditions during the sonication process in which there may be undesirable changes, such as damage to the particle surface thus affecting surface properties. Our goal is to offer a harmonized approach that can control the quality of the final, produced dispersion. Such a guideline is instrumental in ensuring dispersion quality repeatability in the nanoscience community, particularly in the field of nanotoxicology.

Early signs of multi-walled carbon nanotbues degradation in macrophages, via an intracellular pH-dependent biological mechanism; importance of length and functionalization

Background

Carbon nanotubes (CNT) can interact with the biological environment, which could participate in their associated toxicity. We recently demonstrated that pH is an important player of CNT fate inside macrophages. We wanted to further characterize such process, and therefore designed a study dedicated to decipher CNT biodegradation by macrophages, as a function of two major physico-chemical properties in regard with nanotoxicology; length and degree of functionalization. To achieve our aim, we synthesized, following a single initial production process, four MWCNT differing in length and/or surface chemistry: S-CNT (short), SF-CNT (short functionalized), L-CNT (long) and LF-CNT (long functionalized).

Results

Raman spectroscopy analysis performed on CNT recovered after exposure of RAW 264.7 macrophages for 6, 24, or 48 h demonstrate that CNT show early signs of biodegradation over time inside macrophages. The modulation of CNT length and functionalization, resulting in the modification of iron accessibility, both represent critical determinants of the biodegradation process; short pristine CNT were more prone to biodegradation than long CNT (pristine or functionalized), while short functionalized CNT were protected. Incubation of cells with Concanamycin completely prevents CNT from being modified, demonstrating that this biodegradation process is dependent on an intracellular pH-dependent mechanism. Interestingly, and despite evidence of degradation via Raman spectroscopy, the CNT length and diameter were not altered during the course of the study.

Conclusions

In conclusion, our results identify a new mechanism of CNT biodegradation inside macrophages. This could give new insights for the understanding of CNT-associated toxicity, and represent important tools to develop safe(r)-by-design nanomaterials.

Electronic supplementary material

The online version of this article (doi:10.1186/s12989-016-0175-z) contains supplementary material, which is available to authorized users.

Quantitative evaluation of multi-walled carbon nanotube uptake in wheat and rapeseed

Environmental contamination with carbon nanotubes would lead to plant exposure and particularly exposure of agricultural crops. The only quantitative exposure data available to date which can be used for risk assessment comes from computer modeling. The aim of this study was to provide quantitative data relative to multi-walled carbon nanotube (MWCNT) uptake and distribution in agricultural crops, and to correlate accumulation data with impact on plant development and physiology. Roots of wheat and rapeseed were exposed in hydroponics to uniformly (14)C-radiolabeled MWCNTs. Radioimaging, transmission electron microscopy and raman spectroscopy were used to identify CNT distribution. Radioactivity counting made it possible absolute quantification of CNT accumulation in plant leaves. Impact of CNTs on seed germination, root elongation, plant biomass, evapotranspiration, chlorophyll, thiobarbituric acid reactive species and H(2)O(2) contents was evaluated. We demonstrate that less than 0.005‰ of the applied MWCNT dose is taken up by plant roots and translocated to the leaves. This accumulation does not impact plant development and physiology. In addition, it does not induce any modifications in photosynthetic activity nor cause oxidative stress in plant leaves. Our results suggest that if environmental contamination occurs and MWCNTs are in the same physico-chemical state than the ones used in the present article, MWCNT transfer to the food chain via food crops would be very low.

Growth of long and aligned multi-walled carbon nanotubes on carbon and metal substrates

Well aligned, long and dense multi-walled carbon nanotubes (CNT) can be grown on both carbon fibres and any metal substrates compatible with the CNT synthesis temperature. The injection-CVD process developed involves two stages, including fibre pretreatment by depositing a SiO(2)-based sub-layer from an organometallic precursor followed by CNT growth from toluene/ferrocene precursor mixture. Carbon substrates, as well as metals, can easily be treated with this process, which takes place in the same reactor and does not need any handling in between the two stages. The aligned CNT carpets obtained are similar to the ones grown on reference quartz substrates. The CNT growth rate is fairly high (ca. 30 μm min(-1)) and it is possible to control CNT length by varying the CNT synthesis duration. The thickness of the SiO(2)-based sub-layer can be varied and is shown to have an influence on the CNT growth. This layer is assumed to play a diffusion barrier layer role between the substrate and the iron based catalyst nanoparticles producing CNT. The CNT anchorage to the carbon fibres has been checked and good overall adhesion proved, which is in favour of a good transfer of electrical charge and heat between the nanotubes and fibre.

Synchrotron X-ray diffraction experiments with a prototype hybrid pixel detector

A prototype X-ray pixel area detector (XPAD3.1) has been used for X-ray diffraction experiments with synchrotron radiation. The characteristics of this detector are very attractive in terms of fast readout time, high dynamic range and high signal-to-noise ratio. The prototype XPAD3.1 enabled various diffraction experiments to be performed at different energies, sample-to-detector distances and detector angles with respect to the direct beam, yet it was necessary to perform corrections on the diffraction images according to the type of experiment. This paper is focused on calibration and correction procedures to obtain high-quality scientific results specifically developed in the context of three different experiments, namely mechanical characterization of nanostructured multilayers, elastic–plastic deformation of duplex steel and growth of carbon nanotubes.

Optimized network of multi-walled carbon nanotubes for chemical sensing

This work reports the design of a resistive gas sensor based on 2D mats of multi-walled carbon nanotubes (MWCNTs) grown by aerosol-assisted chemical vapour deposition. The sensor sensitivity was optimized using chlorine as analyte by tuning both CNT network morphology and CNT electronic properties. Optimized devices, operating at room temperature, have been calibrated over a large range of concentration and are shown to be sensitive down to 27 ppb of chlorine. The as-grown MWCNT response is compared with responses of 2000 °C annealed CNTs, as well as of nitrogen-doped CNTs and CNTs functionalized with polyethyleneimine (PEI). Under chlorine exposure, the resistance decrease of as-grown and annealed CNTs is attributed to charge transfer from chlorine to CNTs and demonstrates their p-type semiconductor behaviour. XPS analysis of CNTs exposed to chlorine shows the presence of chloride species that confirms electron charge transfer from chlorine to CNTs. By contrast, the resistance of nitrogen-doped and PEI functionalized CNTs exposed to chlorine increases, in agreement with their n-type semiconductor nature. The best response is obtained using annealed CNTs and is attributed to their higher degree of crystallinity.

Dispersion study of long and aligned multi-walled carbon nanotubes in water

Dispersion of nanotubes is a crucial step for many applications. The properties of the final nanotube-based material are strongly dependent on the quality of nanotube suspensions. In this study, long and aligned multi-walled carbon nanotubes obtained by catalytic chemical vapour deposition were dispersed in water with different dispersing agents using high intensity ultrasounds. Among different additives, we selected sodium dodecyl sulfate (SDS) as dispersing agent to prepare suspensions of nanotubes. UV-Visible spectrometry method was used to measure the influence of dispersion parameters (power and duration of sonication) on dispersion state and suspension stability. Therefore, we demonstrated that, even if high intensity ultra-sounds are breaking nanotubes, it is possible to obtain stable water-based suspensions containing MWNTs which exhibit length up to 20 microm.

Evidence of sequential lift in growth of aligned multiwalled carbon nanotube multilayers

We synthesized aligned multiwalled carbon nanotube multilayers by aerosol-assisted catalytic chemical vapor deposition through sequential injections of aerosols containing both carbon and catalyst precursors. Each sequence was traced by a specific duration or precursor mixture, with the carbon source being possibly enriched in (13)C isotope labels. We discovered that any sequence involved the growth of a new layer on the substrate surface, under any pre-existing one by lifting it up, giving definitive evidence of a base-growth mechanism.