Rapid detection of a cocaine-binding aptamer using biological nanopores on a chip

This paper describes a methodology for the rapid and highly selective detection of cocaine using a membrane protein channel combined with a DNA aptamer. The DNA aptamer recognizes the cocaine molecule with high selectivity. We successfully detected a low concentration of cocaine (300 ng/mL, the drug test cutoff limit) within 60 s using a biological nanopore embedded in a microchip.

Controlled synthesis of 3D multi-compartmental particles with centrifuge-based microdroplet formation from a multi-barrelled capillary

Controlled synthesis of micro multi-compartmental particles using a centrifuge droplet shooting device (CDSD) is reported. Sodium alginate solutions introduced in a multi-barreled capillary form droplets at the capillary orifice under ultrahigh gravity and gelify in a CaCl(2) solution. The size, shape, and compartmentalization of the particles are controlled. Co-encapsulation of Jurkat cells and magnetic colloids into Janus particles is demonstrated. The Janus particles present sensitive reaction toward magnetic fields, while the viability of the encapsulated cells is 91%.

DNA cytoskeleton for stabilizing artificial cells

Cell-sized liposomes and droplets coated with lipid layers have been used as platforms for understanding live cells, constructing artificial cells, and implementing functional biomedical tools such as biosensing platforms and drug delivery systems. However, these systems are very fragile, which results from the absence of cytoskeletons in these systems. Here, we construct an artificial cytoskeleton using DNA nanostructures. The designed DNA oligomers form a Y-shaped nanostructure and connect to each other with their complementary sticky ends to form networks. To undercoat lipid membranes with this DNA network, we used cationic lipids that attract negatively charged DNA. By encapsulating the DNA into the droplets, we successfully created a DNA shell underneath the membrane. The DNA shells increased interfacial tension, elastic modulus, and shear modulus of the droplet surface, consequently stabilizing the lipid droplets. Such drastic changes in stability were detected only when the DNA shell was in the gel phase. Furthermore, we demonstrate that liposomes with the DNA gel shell are substantially tolerant against outer osmotic shock. These results clearly show the DNA gel shell is a stabilizer of the lipid membrane akin to the cytoskeleton in live cells.

Sequence-based engineering of dynamic functions of micrometer-sized DNA droplets

DNA has the potential to achieve a controllable macromolecular structure, such as hydrogels or droplets formed through liquid-liquid phase separation (LLPS), as the design of its base sequence can result in programmable interactions. Here, we constructed "DNA droplets" via LLPS of sequence-designed DNA nanostructures and controlled their dynamic functions by designing their sequences. Specifically, we were able to adjust the temperature required for the formation of DNA droplets by designing the sequences. In addition, the fusion, fission, and formation of Janus-shaped droplets were controlled by sequence design and enzymatic reactions. Furthermore, modifications of proteins with sequence-designed DNAs allowed for their capture into specific droplets. Overall, our results provide a platform for designing and controlling macromolecular droplets via the information encoded in component molecules and pave the way for various applications of sequence-designed DNA such as cell mimics, synthetic membraneless organelles, and artificial molecular systems.

Feedback control of protein expression in mammalian cells by tunable synthetic translational inhibition

Feedback regulation plays a crucial role in dynamic gene expression in nature, but synthetic translational feedback systems have yet to be demonstrated. Here we use an RNA/protein interaction-based synthetic translational switch to create a feedback system that tightly controls the expression of proteins of interest in mammalian cells. Feedback is mediated by modified ribosomal L7Ae proteins, which bind a set of RNA motifs with a range of affinities. We designed these motifs into L7Ae-encoding mRNA. Newly translated L7Ae binds its own mRNA, inhibiting further translation. This inhibition tightly feedback-regulates the concentration of L7Ae and any fusion partner of interest. A mathematical model predicts system behavior as a function of RNA/protein affinity. We further demonstrate that the L7Ae protein can simultaneously and tunably regulate the expression of multiple proteins of interest by binding RNA control motifs built into each mRNA, allowing control over the coordinated expression of protein networks.

Magnetic Actuation of Drops and Liquid Marbles Using a Deformable Paramagnetic Liquid Substrate

The magnetic actuation of deposited drops has mainly relied on volume forces exerted on the liquid to be transported, which is poorly efficient with conventional diamagnetic liquids such as water and oil, unless magnetosensitive particles are added. Herein, we describe a new and additive‐free way to magnetically control the motion of discrete liquid entities. Our strategy consists of using a paramagnetic liquid as a deformable substrate to direct, using a magnet, the motion of various floating liquid entities, ranging from naked drops to liquid marbles. A broad variety of liquids, including diamagnetic (water, oil) and nonmagnetic ones, can be efficiently transported using the moderate magnetic field (ca. 50 mT) produced by a small permanent magnet. Complex trajectories can be achieved in a reliable manner and multiplexing potential is demonstrated through on‐demand drop fusion. Our paramagnetofluidic method advantageously works without any complex equipment or electric power, in phase with the necessary development of robust and low‐cost analytical and diagnostic fluidic devices.

Droplet microfluidics for the study of artificial cells

In this review, we describe recent advances in droplet-based microfluidics technology that can be applied in studies of artificial cells. Artificial cells are simplified models of living cells and provide valuable model platforms designed to reveal the functions of biological systems. The study of artificial cells is promoted by microfluidics technologies, which provide control over tiny volumes of solutions during quantitative chemical experiments and other manipulations. Here, we focus on current and future trends in droplet microfluidics and their applications in studies of artificial cells.

Logic Gate Operation by DNA Translocation through Biological Nanopores

Logical operations using biological molecules, such as DNA computing or programmable diagnosis using DNA, have recently received attention. Challenges remain with respect to the development of such systems, including label-free output detection and the rapidity of operation. Here, we propose integration of biological nanopores with DNA molecules for development of a logical operating system. We configured outputs “1” and “0” as single-stranded DNA (ssDNA) that is or is not translocated through a nanopore; unlabeled DNA was detected electrically. A negative-AND (NAND) operation was successfully conducted within approximately 10 min, which is rapid compared with previous studies using unlabeled DNA. In addition, this operation was executed in a four-droplet network. DNA molecules and associated information were transferred among droplets via biological nanopores. This system would facilitate linking of molecules and electronic interfaces. Thus, it could be applied to molecular robotics, genetic engineering, and even medical diagnosis and treatment.

Experiments and simulation models of a basic computation element of an autonomous molecular computing system

Autonomous DNA computers have been attracting much attention because of their ability to integrate into living cells. Autonomous DNA computers can process information through DNA molecules and their molecular reactions. We have already proposed an idea of an autonomous molecular computer with high computational ability, which is now named Reverse-transcription-and-TRanscription-based Autonomous Computing System (RTRACS). In this study, we first report an experimental demonstration of a basic computation element of RTRACS and a mathematical modeling method for RTRACS. We focus on an AND gate, which produces an output RNA molecule only when two input RNA molecules exist, because it is one of the most basic computation elements in RTRACS. Experimental results demonstrated that the basic computation element worked as designed. In addition, its behaviors were analyzed using a mathematical model describing the molecular reactions of the RTRACS computation elements. A comparison between experiments and simulations confirmed the validity of the mathematical modeling method. This study will accelerate construction of various kinds of computation elements and computational circuits of RTRACS, and thus advance the research on autonomous DNA computers.

Nanopore Logic Operation with DNA to RNA Transcription in a Droplet System

This paper describes an AND logic operation with amplification and transcription from DNA to RNA, using T7 RNA polymerase. All four operations, (0 0) to (1 1), with an enzyme reaction can be performed simultaneously, using four-droplet devices that are directly connected to a patch-clamp amplifier. The output RNA molecule is detected using a biological nanopore with single-molecule translocation. Channel current recordings can be obtained using the enzyme solution. The integration of DNA logic gates into electrochemical devices is necessary to obtain output information in a human-recognizable form. Our method will be useful for rapid and confined DNA computing applications, including the development of programmable diagnostic devices.

Capsule-like DNA Hydrogels with Patterns Formed by Lateral Phase Separation of DNA Nanostructures

Phase separation is a key phenomenon in artificial cell construction. Recent studies have shown that the liquid-liquid phase separation of designed-DNA nanostructures induces the formation of liquid-like condensates that eventually become hydrogels by lowering the solution temperature. As a compartmental capsule is an essential artificial cell structure, many studies have focused on the lateral phase separation of artificial lipid vesicles. However, controlling phase separation using a molecular design approach remains challenging. Here, we present the lateral liquid-liquid phase separation of DNA nanostructures that leads to the formation of phase-separated capsule-like hydrogels. We designed three types of DNA nanostructures (two orthogonal and a linker nanostructure) that were adsorbed onto an interface of water-in-oil (W/O) droplets via electrostatic interactions. The phase separation of DNA nanostructures led to the formation of hydrogels with bicontinuous, patch, and mix patterns, due to the immiscibility of liquid-like DNA during the self-assembly process. The frequency of appearance of these patterns was altered by designing DNA sequences and altering the mixing ratio of the nanostructures. We constructed a phase diagram for the capsule-like DNA hydrogels by investigating pattern formation under various conditions. The phase-separated DNA hydrogels did not only form on the W/O droplet interface but also on the inner leaflet of lipid vesicles. Notably, the capsule-like hydrogels were extracted into an aqueous solution, maintaining the patterns formed by the lateral phase separation. In addition, the extracted hydrogels were successfully combined with enzymatic reactions, which induced their degradation. Our results provide a method for the design and control of phase-separated hydrogel capsules using sequence-designed DNAs. We envision that by incorporating various DNA nanodevices into DNA hydrogel capsules, the capsules will gain molecular sensing, chemical-information processing, and mechanochemical actuating functions, allowing the construction of functional molecular systems.

Creation of Artificial Cell-Like Structures Promoted by Microfluidics Technologies

The creation of artificial cells is an immensely challenging task in science. Artificial cells contribute to revealing the mechanisms of biological systems and deepening our understanding of them. The progress of versatile biological research fields has clarified many biological phenomena, and various artificial cell models have been proposed in these fields. Microfluidics provides useful technologies for the study of artificial cells because it allows the fabrication of cell-like compartments, including water-in-oil emulsions and giant unilamellar vesicles. Furthermore, microfluidics also allows the mimicry of cellular functions with chip devices based on sophisticated chamber design. In this review, we describe contributions of microfluidics to the study of artificial cells. Although typical microfluidic methods are useful for the creation of artificial-cell compartments, recent methods provide further benefits, including low-cost fabrication and a reduction of the sample volume. Microfluidics also allows us to create multi-compartments, compartments with artificial organelles, and on-chip artificial cells. We discuss these topics and the future perspective of microfluidics for the study of artificial cells and molecular robotics.

Complex-shaped three-dimensional multi-compartmental microparticles generated by diffusional and Marangoni microflows in centrifugally discharged droplets

We report a versatile method for the generation of complex-shaped three-dimensional multi-compartmental (3D-MC) microparticles. Complex-shaped microparticles have recently received much attention for potential application in self-assemblies, micromachines, and biomedical and environmental engineering. Here, we have developed a method based on 3D nonequilibrium-induced microflows (Marangoni and diffusional flows) of microdroplets that are discharged from the tip of a thin capillary in a simple centrifugal microfluidic device. The microparticle shapes can be tuned by the partial dissolution of specific compartments and by the deformation of the precursor microdroplets by manipulating the 3D microflows. We believe that this method will have wide applications in nano- and microscience and technologies.

Pulse-density modulation control of chemical oscillation far from equilibrium in a droplet open-reactor system

The design, construction and control of artificial self-organized systems modelled on dynamical behaviours of living systems are important issues in biologically inspired engineering. Such systems are usually based on complex reaction dynamics far from equilibrium; therefore, the control of non-equilibrium conditions is required. Here we report a droplet open-reactor system, based on droplet fusion and fission, that achieves dynamical control over chemical fluxes into/out of the reactor for chemical reactions far from equilibrium. We mathematically reveal that the control mechanism is formulated as pulse-density modulation control of the fusion–fission timing. We produce the droplet open-reactor system using microfluidic technologies and then perform external control and autonomous feedback control over autocatalytic chemical oscillation reactions far from equilibrium. We believe that this system will be valuable for the dynamical control over self-organized phenomena far from equilibrium in chemical and biomedical studies.

Biological systems typically operate at conditions far from chemical equilibrium. Here, the authors model and develop a microfluidic reactor allowing control over time-variable supply and dissipation of chemicals by droplet fusion and fission, allowing non-equilibrium chemical reactions to be regulated.

RTRACS: a modularized RNA-dependent RNA transcription system with high programmability

Creating artificial biological systems is an important research endeavor. Each success contributes to synthetic biology and adds to our understanding of the functioning of the biomachinery of life. In the construction of large, complex systems, a modular approach simplifies the design process: a multilayered system can be prepared by integrating simple modules. With the concept of modularity, a variety of synthetic biological systems have been constructed, both in vivo and in vitro. But to properly develop systems with desired functions that integrate multiple modules, researchers need accurate mathematical models. In this Account, we review the development of a modularized artificial biological system known as RTRACS (reverse transcription and transcription-based autonomous computing system). In addition to modularity, model-guided predictability is an important feature of RTRACS. RTRACS has been developed as an in vitro artificial biological system through the assembly of RNA, DNA, and enzymes. A fundamental module of RTRACS receives an input RNA with a specific sequence and returns an output RNA with another specific sequence programmed in the main body, which is composed of DNA and enzymes. The conversion of the input RNA to the output RNA is achieved through a series of programmed reactions performed by the components assembled in the module. Through the substitution of a subset of components, a module that performs the AND operation was constructed. Other logical operations could be constructed with RTRACS modules. An integration of RTRACS modules has allowed the theoretical design of more complex functions, such as oscillation. The operations of these RTRACS modules were readily predicted with a numerical simulation based on a mathematical model using realistic parameters. RTRACS has the potential to model highly complex systems that function like a living cell. RTRACS was designed to be integrated with other molecules or molecular devices, for example, aptazymes, cell-free expression systems, and liposomes. For the integration of these new modules, the quantitative controls of each module based on the numerical simulation will be instructive. The capabilities of RTRACS promise to provide models of complex biomolecular systems that are able to detect the environment, assess the situation, and react to overcome the situation. Such a smart biomolecular system could be useful in many applications, such as drug delivery systems.

DNA Droplets: Intelligent, Dynamic Fluid

Breathtaking advances in DNA nanotechnology have established DNA as a promising biomaterial for the fabrication of programmable higher-order nano/microstructures. In the context of developing artificial cells and tissues, DNA droplets have emerged as a powerful platform for creating intelligent, dynamic cell-like machinery. DNA droplets are a microscale membrane-free coacervate of DNA formed through phase separation. This new type of DNA system couples dynamic fluid-like property with long-established DNA programmability. This hybrid nature offers an advantageous route to facile and robust control over the structures, functions, and behaviors of DNA droplets. This review begins by describing programmable DNA condensation, commenting on the physical properties and fabrication strategies of DNA hydrogels and droplets. By presenting an overview of the development pathways leading to DNA droplets, it is shown that DNA technology has evolved from static, rigid systems to soft, dynamic systems. Next, the basic characteristics of DNA droplets are described as intelligent, dynamic fluid by showcasing the latest examples highlighting their distinctive features related to sequence-specific interactions and programmable mechanical properties. Finally, this review discusses the potential and challenges of numerical modeling able to connect a robust link between individual sequences and macroscopic mechanical properties of DNA droplets.

Compartmentalized Spherical Collagen Microparticles for Anisotropic Cell Culture Microenvironments

This paper describes a new fabrication method for obtaining anisotropic spherical hydrogel microparticles with different types of extracellular matrix (ECM) hemispheres for use in 3D cell culture. To fabricate the microparticles, a mixture of an ECM precursor solution and sodium alginate is ejected into a calcium chloride solution under large centrifugal acceleration by a centrifuge-based microfluidic device; the calcium alginate hydrogel plays a significant role as a "sacrificial gelation template" to maintain the ECM molecules in each hemisphere. This fabrication method enables gaining control of the hemispherical volume, density, and type of ECM. Using the microparticles, cells could be successfully encapsulated in each hemisphere selectively with high viability, which are then suitable for culture in the microparticles to form microtissues. It is believed that the proposed anisotropic ECM microparticles will facilitate the coculture of multiple cell types in different ECMs, which is similar to in vivo microenvironments, facilitating control of cell behavior in an anisotropic microenvironment for the benefit of large-scale and quantitative analyses in vitro.

Photolithographic shape control of DNA hydrogels by photo-activated self-assembly of DNA nanostructures

We report a photolithographic method for the shape control of DNA hydrogels based on photo-activated self-assembly of Y-shaped DNA nanostructures (Y-motifs). To date, various methods to control the shape of DNA hydrogels have been developed to enhance the functions of the DNA hydrogel system. However, photolithographic production of shape-controlled DNA hydrogels formed through the self-assembly of DNA nanostructures without the use of radical polymerizations has never been demonstrated, although such a method is expected to be applied for the shape-control of DNA hydrogels encapsulating sensitive biomolecules, such as proteins. In this study, we used a photo-activated linker to initiate the self-assembly of Y-motifs, where the cross-linker DNA was at first inactive but was activated after UV light irradiation, resulting in the formation of shape-controlled DNA hydrogels only at the UV-exposed area produced by photomasks. We believe that this method will be applied for the construction of biohybrid machines, such as molecular robots and artificial cells that contain intelligent biomolecular devices, such as molecular sensors and computers.

DNA Origami Nanoplate-Based Emulsion with Nanopore Function

Bio-inspired functional microcapsules have attracted increasing attention in many fields from physical/chemical science to artificial-cell engineering. Although particle-stabilised microcapsules are advantageous for their stability and functionalisation potential, versatile methods for their functionalisation are desired to expand their possibilities. This study reports a water-in-oil microdroplet stabilised with amphiphilic DNA origami nanoplates. By utilising DNA nanotechnology, DNA nanoplates were designed as a nanopore device for ion transportation and to stabilise the oil-water interface. Microscopic examination revealed the microcapsule formed by the accumulation of amphiphilic DNA nanoplates at the oil-water interface. Ion current measurements revealed the nanoplate pores functioned as channel to transport ions. These findings provide a general strategy for the programmable design of microcapsules to engineer artificial cells and molecular robots.