Amphiphilic Azo-Functionalized Polyhedral Oligomeric Silsesquioxane; Synthesis and Photo-Switched Efficient Phase Transfer via Host-Guest Encapsulation

A new amphiphilic azo-functionalized polyhedral oligomeric silsesquioxane (POSS) derivative was synthesized by functionalizing octa(3-aminopropyl)silsesquioxane (OAS-POSS) with 4-((4-(dodecyloxy)phenyl)diazenyl)benzoic acid, affording a hydrophilic amino POSS head and hydrophobic dodecyl tail with a diphenyl-azo connector. Prepared amphiphilic azo-functionalized POSS (azo-POSS) exhibited high ability for encapsulation and transferring cationic dyes into the organic phase by vigorously mixing with aqueous solutions of each dye. The photo-controlled encapsulating properties of the synthesized phase transfer reagent was studied using cationic dyes, such as methylene blue (MB), crystal violet (CV) and thymol blue in acidic conditions. Results showed more than 95 % encapsulation of MB. However, no considerable encapsulation was shown in the case of anionic dyes such as eriochrome black T (EBT) and thymol blue in alkaline solutions. By trans/cis isomerization of the azo moiety of the phase transfer reagent by UV irradiation (365 nm), the amount of dye encapsulation was decreased, which could be attributed to the formation of cis isomer that led to the folding of the dodecyl alkyl tail on the POSS moiety, and therefore prevent to lay the 3-aminopropyl moieties of POSS head to the water/DCM interface to adsorb and encapsulate MB molecules.

Immobilization of Rh(I) precursor in a porphyrin metal-organic framework - turning on the catalytic activity

Two model porphyrin metal-organic frameworks were used for the incorporation of Rh(i) species by a post-synthetic metallation under mild conditions. As a result, new rhodium MOFs (Rh/MOFs), Rh/PCN-222 and Rh/NU-1102, were synthesized and structurally characterized. To illustrate the potential of this catalytic platform, we use Rh/MOFs as phosphine-free heterogeneous catalysts in the hydrogenation of unsaturated hydrocarbons under mild reaction conditions (30 °C and 1 atm H2). We found that for our Rh/MOFs an activation step is required during the first run of the catalytic process. The presence of Rh-CO moieties allowed us to monitor the activation pathway of the catalyst under a H2 atmosphere, by in situ Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS). After activation, the catalyst remains highly active during the subsequent catalytic cycles. This simple post-synthetic modification approach presents new possibilities for the utilization of Rh-based catalytic systems with robust porphyrin-based MOFs as supports.

Quest for an Efficient 2-in-1 MOF-Based Catalytic System for Cycloaddition of CO2 to Epoxides under Mild Conditions

We have devised a straightforward tandem postsynthetic modification strategy for Zr-based metal-organic framework (MOF) materials, which resulted in a series of well-defined 2-in-1 heterogeneous catalysts, cat1-cat8, exhibiting high catalytic activity in the synthesis of cyclic carbonates under solvent-free and co-catalyst-free conditions. The materials feature precisely located co-catalyst moieties decorating the metal nodes throughout the bulk of the MOF and yield cyclic carbonates with up to 99% efficiency at room temperature. We use diffuse reflectance infrared Fourier transform (DRIFT) and solid-state nuclear magnetic resonance (NMR) measurements to elucidate the role of each component in this model catalytic reaction. Establishing a method to precisely control the co-catalyst loading allowed us to observe the cooperativity between Lewis acid sites and the co-catalyst in the 2-in-1 heterogeneous system.

2,4,6-Triphenylpyridinium: A Bulky, Highly Electron-Withdrawing Substituent That Enhances Properties of Nickel(II) Ethylene Polymerization Catalysts

The reactivity of Ni^II and Pd^II olefin polymerization catalysts can be enhanced by introduction of electron-withdrawing substituents on the supporting ligands rendering the metal centers more electrophilic. Reported here is a comparison of ethylene polymerization activity of a classical salicyliminato nickel catalyst substituted with the powerful electron-withdrawing 2,4,6-triphenylpyridinium (trippy) group to the -CF₃ analogue. The trippy substituent is substantially more electron-withdrawing (σ_meta =0.63) than the trifluoromethyl group (σ_meta =0.43) which results in a ca. 8-fold increase in catalytic turnover frequency. An additional advantage of trippy is the high steric bulk relative to the trifluoromethyl group. This feature results in a four-fold increase in polymer molecular weight owing to enhanced retardation of chain transfer. A significant increase in catalyst lifetime is observed as well.

Zinc Imine Polyhedral Oligomeric Silsesquioxane as a Quattro-Site Catalyst for the Synthesis of Cyclic Carbonates from Epoxides and Low-Pressure CO2

In the present research, the synthesis, spectroscopic characterization, and structural investigations of a unique Zn^II complex of imine-functionalized polyhedral oligomeric silsesquioxane (POSS) is designed, and hereby described, as a catalyst for the synthesis of cyclic carbonates from epoxides and CO₂. The uncommon features of the designed catalytic system is the elimination of the need for a high pressure of CO₂ and the significant shortening of reaction times commonly associated with such difficult transformations like that of styrene oxide to styrene carbonate. Our studies have shown that imine-POSS is able to chelate metal ions like Zn^II to form a unique coordination complex. The silsesquioxane core and the hindrance of the side arms (their steric effect) influence the construction process of the homoleptic Zn₄@POSS-1 complex. The compound was characterized in solution by NMR (¹H, ¹³C, ²⁹Si), ESI-MS, UV/Vis spectroscopy and in the solid state by thermogravimetric/differential thermal analysis (TG-DTA), elemental analysis, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), cross-polarization magic angle spinning (CP MAS) NMR (¹³C, ²⁹Si) spectroscopy, and X-ray crystallography.

Binary bioactive glass composite scaffolds for bone tissue engineering-Structure and mechanical properties in micro and nano scale. A preliminary study

Composite scaffolds of bioactive glass (SiO₂-CaO) and bioresorbable polyesters: poly-l-lactic acid (PLLA) and polycaprolactone (PCL) were produced by polymer coating of porous foams. Their structure and mechanical properties were investigated in micro and nanoscale, by the means of scanning electron microscopy, PeakForce Quantitative Nanomechanical Property Mapping (PF-QNM) atomic force microscopy, micro-computed tomography and contact angle measurements. This is one of the first studies in which the nanomechanical properties (elastic modulus, adhesion) were measured and mapped simultaneously with topography imaging (PF-QNM AFM) for bioactive glass and bioactive glass - polymer coated scaffolds. Our findings show that polymer coated scaffolds had higher average roughness and lower stiffness in comparison to pure bioactive glass scaffolds. Such coating-dependent scaffold properties may promote different cells-scaffold interaction.

Fabrication, multi-scale characterization and in-vitro evaluation of porous hybrid bioactive glass polymer-coated scaffolds for bone tissue engineering

Bioactive glass-based scaffolds are commonly used in bone tissue engineering due to their biocompatibility, mechanical strength and adequate porous structure. However, their hydrophobicity and brittleness limits their practical application. In this study, to improve nanomechanical properties of such scaffolds, pure bioactive hybrid glass and two bioactive hybrid glass-polymer coated composites were fabricated. A complementary micro and nanoscale characterization techniques (SEM, AFM, μCT, FTIR, compressive test, goniometer) were implemented for detailed description of architecture and physicochemical properties of hybrid bioactive glass-based scaffolds with emphasis on nano-mechanics. The final step was in-vitro evaluation of three dimensional macroporous structures. Our findings show that after polymer addition, architecture, topography and surface properties of the scaffolds were changed and promoted favoured behaviour of the cells.

Porous Silsesquioxane-Imine Frameworks as Highly Efficient Adsorbents for Cooperative Iodine Capture

The efficient capture and storage of radioactive iodine (¹²⁹I or ¹³¹I), which can be formed during nuclear energy generation or nuclear waste storage, is of paramount importance. Herein, we present highly efficient aerogels for reversible iodine capture, namely, porous silsesquioxane-imine frameworks (PSIFs), constructed by condensation of octa(3-aminopropyl)silsesquioxane cage compound and selected multitopic aldehydes. The resulting PSIFs are permanently porous (Brunauer-Emmet-Teller surface areas up to 574 m²/g), thermally stable, and present a combination of micro-, meso-, and macropores in their structures. The presence of a large number of imine functional groups in combination with silsesquioxane cores results in extremely high I₂ affinity with uptake capacities up to 485 wt %, which is the highest reported to date. Porous properties can be controlled by the strut length and rigidity of linkers. In addition, PSIF-1a could be recycled at least four times while maintaining 94% I₂ uptake capacity. Kinetic studies of I₂ desorption show two strong binding sites with apparent activation energies of 77.0 and 89.0 kJ/mol. These energies are considerably higher than the enthalpy of sublimation of bulk I₂.

Synthesis of cubic spherosilicates for self-assembled organic–inorganic biohybrids based on functionalized methacrylates

Covalent hybrid networks created by fully substituted cubic spherosilicates containing functionalized methacrylates as side chains were synthesized.

First step towards a model system of the drug delivery network based on amide-POSS nanocarriers

We present the synthetic and release aspects of a novel drug delivery system (DDS) based on amido-functionalized POSS. DDS after drug release hydrolyses at pH = 7.40 to non-toxic products such as carboxylic acid salts and aminopropyl-POSS.

Synthesis and microstructural properties of the scaffold based on a 3-(trimethoxysilyl)propyl methacrylate–POSS hybrid towards potential tissue engineering applications

The biomimetic organic–inorganic scaffold with the chemical composition, structural dimensions, topography, and microstructural properties that fulfills the requirements for hard-tissue engineering was developed.

Multifunctional imine-POSS as uncommon 3D nanobuilding blocks for supramolecular hybrid materials: synthesis, structural characterization, and properties

Imino-functionalized cage-like octasilsesquioxanes provide unique examples of the 3D supramolecular network and their relationship to the assembly of tunable materials from nanobuilding blocks.

Novel organic–inorganic hybrids based on T8 and T10 silsesquioxanes: synthesis, cage-rearrangement and properties

A simple approach for the synthesis of well-defined macromolecules based on isolated amino- and amido-functionalized octa T₈ and deca T₁₀ silsesquioxanes is presented. Here we show how the reorganization of the siloxane cage-like core (cage rearrangement) can be performed.