Joule-class THz pulses from microchannel targets

Inference of joule-class THz radiation sources from microchannel targets driven with hundreds of joule, picosecond lasers is reported. THz sources of this magnitude are useful for nonlinear pumping of matter and for charged-particle acceleration and manipulation. Microchannel targets demonstrate increased laser-THz conversion efficiency compared to planar foil targets, with laser energy to THz energy conversion up to ∼0.9% in the best cases.

Development of a hardened THz energy meter for use on the kilojoule-scale, short-pulse OMEGA EP laser

A highly adaptable and robust terahertz (THz) energy meter is designed and implemented to detect energetic THz pulses from high-intensity (>10¹⁸ W/cm²) laser-plasma interactions on the OMEGA EP. THz radiation from the laser driven target is detected by a shielded pyrometer. A second identical pyrometer is used for background subtraction. The detector can be configured to detect THz pulses in the 1 mm to 30 μm (0.3- to 10-THz) range and pulse energies from joules to microjoules via changes in filtration, aperture size, and position. Additional polarization selective filtration can also be used to determine the THz pulse polarization. The design incorporates significant radiation and electromagnetic pulse shielding to survive and operate within the OMEGA EP radiation environment. We describe the design, operational principle, calibration, and testing of the THz energy meter. The pyrometers were calibrated using a benchtop laser and show linear sensitivity to up to 1000 nJ of absorbed energy. The initial results from four OMEGA EP THz experiments detected up to ∼15μJ at the detector, which can correspond to hundreds of mJ depending on THz emission and reflection models.

Transport of an intense proton beam from a cone-structured target through plastic foam with unique proton source modeling

Laser-accelerated proton beams are applicable to several research areas within high-energy density science, including warm dense matter generation, proton radiography, and inertial confinement fusion, which all involve transport of the beam through matter. We report on experimental measurements of intense proton beam transport through plastic foam blocks. The intense proton beam was accelerated by the 10ps, 700J OMEGA EP laser irradiating a curved foil target, and focused by an attached hollow cone. The protons then entered the foam block of density 0.38g/cm^{3} and thickness 0.55 or 1.00mm. At the rear of the foam block, a Cu layer revealed the cross section of the intense beam via proton- and hot electron-induced Cu-K_{α} emission. Images of x-ray emission show a bright spot on the rear Cu film indicative of a forward-directed beam without major breakup. 2D fluid-PIC simulations of the transport were conducted using a unique multi-injection source model incorporating energy-dependent beam divergence. Along with postprocessed calculations of the Cu-K_{α} emission profile, simulations showed that protons retain their ballistic transport through the foam and are able to heat the foam up to several keV in temperature. The total experimental emission profile for the 1.0mm foam agrees qualitatively with the simulated profile, suggesting that the protons indeed retain their beamlike qualities.

Direct Measurements of DT Fuel Preheat from Hot Electrons in Direct-Drive Inertial Confinement Fusion

Hot electrons generated by laser-plasma instabilities degrade the performance of laser-fusion implosions by preheating the DT fuel and reducing core compression. The hot-electron energy deposition in the DT fuel has been directly measured for the first time by comparing the hard x-ray signals between DT-layered and mass-equivalent ablator-only implosions. The electron energy deposition profile in the fuel is inferred through dedicated experiments using Cu-doped payloads of varying thickness. The measured preheat energy accurately explains the areal-density degradation observed in many OMEGA implosions. This technique can be used to assess the viability of the direct-drive approach to laser fusion with respect to the scaling of hot-electron preheat with laser energy.

Pump-depletion dynamics and saturation of stimulated Brillouin scattering in shock ignition relevant experiments

As an alternative inertial confinement fusion scheme, shock ignition requires a strong converging shock driven by a high-intensity laser pulse to ignite a precompressed fusion capsule. Understanding nonlinear laser-plasma instabilities is crucial to assess and improve the laser-shock energy coupling. Recent experiments conducted on the OMEGA EP laser facility have demonstrated that such instabilities can ∼100% deplete the first 0.5 ns of the high-intensity laser. Analyses of the observed laser-generated blast wave suggest that this pump-depletion starts at ∼0.02 critical density and progresses to 0.1-0.2 critical density, which is also confirmed by the time-resolved stimulated Raman backscattering spectra. The pump-depletion dynamics can be explained by the breaking of ion-acoustic waves in stimulated Brillouin scattering. Such pump depletion would inhibit the collisional laser energy absorption but may benefit the generation of hot electrons with moderate temperatures for electron shock ignition [Phys. Rev. Lett. 119, 195001 (2017)PRLTAO0031-900710.1103/PhysRevLett.119.195001].

Electron acceleration at oblique angles via stimulated Raman scattering at laser irradiance >10^{16}Wcm^{-2}μm^{2}

The generation of hot, directional electrons via laser-driven stimulated Raman scattering (SRS) is a topic of great importance in inertial confinement fusion (ICF) schemes. Little recent research has been dedicated to this process at high laser intensity, in which back, side, and forward scatter simultaneously occur in high energy density plasmas, of relevance to, for example, shock ignition ICF. We present an experimental and particle-in-cell (PIC) investigation of hot electron production from SRS in the forward and near-forward directions from a single speckle laser of wavelength λ_{0}=1.053μm, peak laser intensities in the range I_{0}=0.2-1.0×10^{17}Wcm^{-2} and target electron densities between n_{e}=0.3-1.6%n_{c}, where n_{c} is the plasma critical density. As the intensity and density are increased, the hot electron spectrum changes from a sharp cutoff to an extended spectrum with a slope temperature T=34±1keV and maximum measured energy of 350 keV experimentally. Multidimensional PIC simulations indicate that the high energy electrons are primarily generated from SRS-driven electron plasma wave phase fronts with k vectors angled ∼50^{∘} with respect to the laser axis. These results are consistent with analytical arguments that the spatial gain is maximized at an angle which balances the tendency for the growth rate to be larger for larger scattered light wave angles until the kinetic damping of the plasma wave becomes important. The efficiency of generated high energy electrons drops significantly with a reduction in either laser intensity or target electron density, which is a result of the rapid drop in growth rate of Raman scattering at angles in the forward direction.

Ion acceleration from microstructured targets irradiated by high-intensity picosecond laser pulses

Structures on the front surface of thin foil targets for laser-driven ion acceleration have been proposed to increase the ion source maximum energy and conversion efficiency. While structures have been shown to significantly boost the proton acceleration from pulses of moderate-energy fluence, their performance on tightly focused and high-energy lasers remains unclear. Here, we report the results of laser-driven three-dimensional (3D)-printed microtube targets, focusing on their efficacy for ion acceleration. Using the high-contrast (∼10^{12}) PHELIX laser (150J, 10^{21}W/cm^{2}), we studied the acceleration of ions from 1-μm-thick foils covered with micropillars or microtubes, which we compared with flat foils. The front-surface structures significantly increased the conversion efficiency from laser to light ions, with up to a factor of 5 higher proton number with respect to a flat target, albeit without an increase of the cutoff energy. An optimum diameter was found for the microtube targets. Our findings are supported by a systematic particle-in-cell modeling investigation of ion acceleration using 2D simulations with various structure dimensions. Simulations reproduce the experimental data with good agreement, including the observation of the optimum tube diameter, and reveal that the laser is shuttered by the plasma filling the tubes, explaining why the ion cutoff energy was not increased in this regime.

Pump depletion and hot-electron generation in long-density-scale-length plasma with shock-ignition high-intensity laser

Two-dimensional particle-in-cell simulations for laser plasma interaction with laser intensity of 10^{16}W/cm^{2}, plasma density range of 0.01-0.28n_{c}, and scale length of 230-330μm showed significant pump depletion of the laser energy due to stimulated Raman scattering (SRS) and stimulated Brillouin scattering (SBS) in the low-density region (n_{e}=0.01-0.2n_{c}). The simulations identified hot electrons generated by SRS in the low-density region with moderate energy and by two-plasmon-decay near n_{e}=0.25n_{c} with higher energy. The overall hot electron temperature (46 keV) and conversion efficiency (3%) were consistent with the experiment's measurements. The simulations also showed artificially reducing SBS would lead to stronger SRS and a softer hot-electron spectrum.

Direct observation of imploded core heating via fast electrons with super-penetration scheme

Fast ignition (FI) is a promising approach for high-energy-gain inertial confinement fusion in the laboratory. To achieve ignition, the energy of a short-pulse laser is required to be delivered efficiently to the pre-compressed fuel core via a high-energy electron beam. Therefore, understanding the transport and energy deposition of this electron beam inside the pre-compressed core is the key for FI. Here we report on the direct observation of the electron beam transport and deposition in a compressed core through the stimulated Cu Kα emission in the super-penetration scheme. Simulations reproducing the experimental measurements indicate that, at the time of peak compression, about 1% of the short-pulse energy is coupled to a relatively low-density core with a radius of 70 μm. Analysis with the support of 2D particle-in-cell simulations uncovers the key factors improving this coupling efficiency. Our findings are of critical importance for optimizing FI experiments in a super-penetration scheme.

A ten-inch manipulator (TIM) based fast-electron spectrometer with multiple viewing angles (OU-ESM)

The measurement of angularly resolved energy distributions of mega-electron-volt electrons is important for gaining a better understanding of the interaction of ultra-intense laser pulses with plasma, especially for fast-ignition laser-fusion research. It is also crucial when evaluating the production of suprathermal (several 10-keV) electrons through laser-plasma instabilities in conventional hot-spot-ignition and shock-ignition research. For these purposes, we developed a 10-in. manipulator-based multichannel electron spectrometer-the Osaka University electron spectrometer (OU-ESM)-that combines angular resolution with high-energy resolution. The OU-ESM consists of five small electron spectrometers set at every 5°, with an energy range from ∼40 keV to ∼40 MeV. A low-magnetic-field option provides a higher spectral resolution for an energy range of up to ∼5 MeV. We successfully obtained angularly resolved electron spectra for various experiments on the OMEGA and OMEGA EP laser systems.

Soft X-ray backlighter source driven by a short-pulse laser for pump-probe characterization of warm dense matter

Here we propose a pump-probe X-ray absorption spectroscopy temperature measurement technique appropriate for matter having temperature in the range of 10 to a few 100 eV and density up to solid density. Atomic modeling simulations indicate that for various low- to mid-Z materials in this range the energy and optical depth of bound-bound and bound-free absorption features are sensitive to temperature. We discuss sample thickness and tamp layer considerations. A series of experimental investigations was carried out using a range of laser parameters with pulse duration ≤5 ps and various pure and alloyed materials to identify backlighter sources suitable for the technique.

Channel optimization of high-intensity laser beams in millimeter-scale plasmas

Channeling experiments were performed at the OMEGA EP facility using relativistic intensity (>10^{18}W/cm^{2}) kilojoule laser pulses through large density scale length (∼390-570 μm) laser-produced plasmas, demonstrating the effects of the pulse's focal location and intensity as well as the plasma's temperature on the resulting channel formation. The results show deeper channeling when focused into hot plasmas and at lower densities, as expected. However, contrary to previous large-scale particle-in-cell studies, the results also indicate deeper penetration by short (10 ps), intense pulses compared to their longer-duration equivalents. This new observation has many implications for future laser-plasma research in the relativistic regime.

Calibration and characterization of a highly efficient spectrometer in von Hamos geometry for 7-10 keV x-rays

We have built an absolutely calibrated, highly efficient, Bragg crystal spectrometer in von Hamos geometry. This zinc von Hamos spectrometer uses a crystal made from highly oriented pyrolytic graphite that is cylindrically bent along the non-dispersive axis. It is tuned to measure x-ray spectra in the 7-10 keV range and has been designed to be used on a Ten Inch Manipulator for the Omega and OmegaEP target chambers at the Laboratory for Laser Energetics in Rochester, USA. Significant shielding strategies and fluorescence mitigation have been implemented in addition to an imaging plate detector making it well suited for experiments in high-intensity environments. Here we present the design and absolute calibration as well as mosaicity and integrated reflectivity measurements.

Laser propagation measurements in long-scale-length underdense plasmas relevant to magnetized liner inertial fusion

We report experimental results and simulations showing efficient laser energy coupling into plasmas at conditions relevant to the magnetized liner inertial fusion (MagLIF) concept. In MagLIF, to limit convergence and increase the hydrodynamic stability of the implosion, the fuel must be efficiently preheated. To determine the efficiency and physics of preheating by a laser, an Ar plasma with n_{e}/n_{crit}∼0.04 is irradiated by a multi-ns, multi-kJ, 0.35-μm, phase-plate-smoothed laser at spot-averaged intensities ranging from 1.0×10^{14} to 2.5×10^{14}W/cm^{2} and pulse widths from 2 to 10 ns. Time-resolved x-ray images of the laser-heated plasma are compared to two-dimensional radiation-hydrodynamic simulations that show agreement with the propagating emission front, a comparison that constrains laser energy deposition to the plasma. The experiments show that long-pulse, modest-intensity (I=1.5×10^{14}W/cm^{2}) beams can efficiently couple energy (∼82% of the incident energy) to MagLIF-relevant long-length (9.5 mm) underdense plasmas. The demonstrated heating efficiency is significantly higher than is thought to have been achieved in early integrated MagLIF experiments [A. B. Sefkow et al., Phys. Plasmas 21, 072711 (2014)10.1063/1.4890298].

Abstract 2042: A next-generation sequencing-based sample-to-result pharmacogenomics research solution enables both SNV and CNV detection at once

Pharmacogenomics (PGx) is the study of genetic variations in terms of their response to drugs. Variations in gene sequence or copy number may result in complete loss of function, partial decrease or increase in enzyme activity, or an altered affinity for substrates, which may in turn significantly impact a drug's efficacy. PGx studies are increasing in significance as precision medicine is becoming a reality in standard practice. Different technologies have been developed to measure the sequence variation and copy number variation (CNV) in the PGx genes. Among them, a complete sample-to-result PGx workflow solution using the QuantStudio™ 12k Flex Real-Time PCR System is the most notable high throughput solution and has broad adoption by advanced PGx laboratories. Both PGx SNP/INDEL genotyping assays on OpenArray™ plates and copy number analysis on 384-well plates can be performed on the QuantStudio™ 12k Flex System. Integrated analysis software translates genotyping and copy number assay results into star allele genotypes for ease of interpretation. Recently we have developed a next generation sequencing (NGS) based PGx research solution with increased flexibility on the assay targets and combined detection of SNP/INDEL genotyping and CNV using Ion AmpliSeq™ technology for low to medium throughput laboratories. With a highly multiplexed PGx research panel, we can profile a set of 136 genetic markers in 40 known PGx related genes and CYP2D6 copy number variation in a single reaction using Ion Torrent™ semiconductor sequencing. The number of genetic markers can be customized easily based on the user need. To systematically compare these two end-to-end PGx workflows, we collected buccal swab samples from 20 individuals and performed both QuantStudio™ based assays and PGM™ based Ion AmpliSeq™ PGx research assay on them. Both systems generated high quality results. Compared with OpenArray™ plate genotyping results and 384-plate CYP2D6 copy number assay results from the QuantStudio™ system, the Ion AmpliSeq™ PGx research solution demonstrated >99.9% genotyping concordance, 100% CYP2D6 gene CNV concordance, >99.7% reproducibility, <0.2% no-call rate. The Ion AmpliSeq™ PGx solution enables flexible and integrated SNV & CNV detection for both standard genotyping practice and sophisticated exploratory research needs.

Citation Format: Melvin S. Wei, Zhoutao Chen, Shann-Ching Chen, Manimozhi Manivannan, Emily Zeringer, Sunali Patel, Toinette Hartshorne, Guoying Liu, Fiona Hyland, Mark Andersen. A next-generation sequencing-based sample-to-result pharmacogenomics research solution enables both SNV and CNV detection at once. [abstract]. In: Proceedings of the 107th Annual Meeting of the American Association for Cancer Research; 2016 Apr 16-20; New Orleans, LA. Philadelphia (PA): AACR; Cancer Res 2016;76(14 Suppl):Abstract nr 2042.

Generation of Superponderomotive Electrons in Multipicosecond Interactions of Kilojoule Laser Beams with Solid-Density Plasmas

The interaction of a multipicosecond, kilojoule laser pulse with a surface of a solid target has been shown to produce electrons with energies far beyond the free-electron ponderomotive limit m_{e}c^{2}a_{0}^{2}/2. Particle-in-cell simulations indicate that an increase in the pulse duration from 1 to 10 ps leads to the formation of a low-density shelf (about 10% of the critical density). The shelf extends over 100  μm toward the vacuum side, with a nonstationary potential barrier forming in that area. Electrons reflected from the barrier gain superponderomotive energy from the potential. Some electrons experience an even greater energy gain due to ponderomotive acceleration when their "dephasing rate" R=γ-p_{x}/m_{e}c drops well below unity, thus increasing acceleration by a factor of 1/R. Both 1D and 2D simulations indicate that these mechanisms are responsible for the generation of extensive thermal distributions with T_{e}>10  MeV and a high-energy cutoff of hundreds of MeV.

High-contrast laser acceleration of relativistic electrons in solid cone-wire targets

The consequences of small scale-length precursor plasmas on high-intensity laser-driven relativistic electrons are studied via experiments and simulations. Longer scale-length plasmas are shown to dramatically increase the efficiency of electron acceleration, yet, if too long, they reduce the coupling of these electrons into the solid target. Evidence for the existence of an optimal plasma scale-length is presented and estimated to be from 1 to 5μm. Experiments on the Trident laser (I=5×10(19)W/cm(2)) diagnosed via Kα emission from Cu wires attached to Au cones are quantitively reproduced using 2D particle-in-cell simulations that capture the full temporal and spatial scale of the nonlinear laser interaction and electron transport. The simulations indicate that 32%±8%(6.5%±2%) of the laser energy is coupled into electrons of all energies (1-3 MeV) reaching the inner cone tip and that, with an optimized scale-length, this could increase to 35% (9%).

Self-Consistent Simulation of Transport and Energy Deposition of Intense Laser-Accelerated Proton Beams in Solid-Density Matter

The first self-consistent hybrid particle-in-cell (PIC) simulation of intense proton beam transport and energy deposition in solid-density matter is presented. Both the individual proton slowing-down and the collective beam-plasma interaction effects are taken into account with a new dynamic proton stopping power module that has been added to a hybrid PIC code. In this module, the target local stopping power can be updated at each time step based on its thermodynamic state. For intense proton beams, the reduction of target stopping power from the cold condition due to continuous proton heating eventually leads to broadening of the particle range and energy deposition far beyond the Bragg peak. For tightly focused beams, large magnetic field growth in collective interactions results in self-focusing of the beam and much stronger localized heating of the target.

Gigabar spherical shock generation on the OMEGA laser

This Letter presents the first experimental demonstration of the capability to launch shocks of several-hundred Mbar in spherical targets--a milestone for shock ignition [R. Betti et al., Phys. Rev. Lett. 98, 155001 (2007)]. Using the temporal delay between the launching of the strong shock at the outer surface of the spherical target and the time when the shock converges at the center, the shock-launching pressure can be inferred using radiation-hydrodynamic simulations. Peak ablation pressures exceeding 300 Mbar are inferred at absorbed laser intensities of ∼3×10(15)  W/cm2. The shock strength is shown to be significantly enhanced by the coupling of suprathermal electrons with a total converted energy of up to 8% of the incident laser energy. At the end of the laser pulse, the shock pressure is estimated to exceed ∼1  Gbar because of convergence effects.

Investigation of fast-electron-induced Kα x rays in laser-produced blow-off plasma

Refluxing of fast electrons generated by high-intensity, short-pulse lasers was investigated by measuring electron-induced Kα x rays from a buried tracer layer. Using planar foils of Au/Cu/CH, the 150-J, 0.7-ps TITAN short-pulse laser was focused on the gold foil to generate fast electrons and the 3-ns, 300-J long pulse beam irradiated on the CH side to create expanding plasma as a conducting medium. By delaying the short-pulse beam timing from the long pulse laser irradiation, the plasma size was varied to change electron refluxing in the target rear. The total yields and two-dimensional images of 8.05-keV Cu-Kα x ray were recorded with an x-ray spectrometer and two monochromatic crystal imagers. The measurements show that the integrated yields decrease by a factor of 10 from refluxing to the nonrefluxing limit. Similar radial profiles of the Kα images in the rear were observed at all delays. Hybrid-particle-in-cell simulations using plasma profiles calculated by a radiation-hydrodynamic code HYDRA agree well with the measured Kα yields. The simulations suggest that conducting plasma with the size of ∼300 μm in the laser direction and ∼600 μm in the lateral direction at the density of 2 × 1020 1/cm3 is sufficiently large to prevent electrons from refluxing in the target. The parameters found in this study can be useful in designing experiments utilizing a Kα x-ray source in refluxing regime or a tracer layer in nonrefluxing regime.

First Report of Hosta virus X Infecting Hosta Plants in China

Hosta (Hosta spp.) plants showing leaf deformation, puckering, and ink-bleed symptoms were collected in July 2012 from a park at Dongcheng district, Beijing, China. Three out of six samples tested positive for Hosta virus X (HVX) by immunostrip and double-antibody sandwich (DAS)-ELISA with HVX-specific serological reagents from Agdia Inc. (Elkhart, IN, USA). Filamentous viral particles were trapped and observed from the infected hosta leaf sap by immuno-serological electron microscopy (ISEM) (antibodies from Agdia). To confirm HVX infection, three ELISA-positive samples were analyzed by reverse transcription-PCR assay, using virus-specific primers HVXf (5'-ATCCGTTATCTACAGGGGACCAG-3') and HVXr (5'-TAAGTTAGTGGAACGGTTAGCCCGAT-3') that amplified a 1,067-bp fragment including the coat protein (CP) coding region. The CP nucleotide sequence comparisons showed 99% to 100% homology among the three isolates named HVXBJ4, HVXBJ5, and HVXBJ6 (GenBank Accession No. JX535292, JX535293, and JX535294) and with the HVX sequences previously reported in GenBank. HVX has been reported from the United States, Korea, the Netherlands, Poland, France, the Czech Republic, and New Zealand (1,2). To our knowledge, this is the first report of HVX infecting hosta plants in China. As an ornamental and medicinal plant, hosta has been cultivated in China for more than 2,000 years. The presence of HVX in Beijing is a potential threat to the landscape in the city. HVX can be spread by vegetative propagation material or mechanical contact (3). Hence, to cultivate HVX-free hosta and restrict the movement of HVX-infected hosta is vitally important in the future. HVX has become economically important in the world more recently. Globalization of trade in hosta plants has increased the risk of movement of HVX. The national plant protection organization should establish effective quarantine strategy and the growers take proper planting measures to avoid further spreading of this virus. References: (1) S. Currier et al. Plant Dis. 80:1040, 1996. (2) M. H. Park et al. Arch. Virol. 148:2039, 2003. (3) K. H. Ryu et al. Acta Hortic. 722:91, 2006.

Effect of target material on fast-electron transport and resistive collimation

The effect of target material on fast-electron transport is investigated using a high-intensity (0.7 ps, 10(20)  W/cm2) laser pulse irradiated on multilayered solid Al targets with embedded transport (Au, Mo, Al) and tracer (Cu) layers, backed with millimeter-thick carbon foils to minimize refluxing. We consistently observed a more collimated electron beam (36% average reduction in fast-electron induced Cu Kα spot size) using a high- or mid-Z (Au or Mo) layer compared to Al. All targets showed a similar electron flux level in the central spot of the beam. Two-dimensional collisional particle-in-cell simulations showed formation of strong self-generated resistive magnetic fields in targets with a high-Z transport layer that suppressed the fast-electron beam divergence; the consequent magnetic channels guided the fast electrons to a smaller spot, in good agreement with experiments. These findings indicate that fast-electron transport can be controlled by self-generated resistive magnetic fields and may have important implications to fast ignition.

Dynamics of high-energy proton beam acceleration and focusing from hemisphere-cone targets by high-intensity lasers

Acceleration and focusing of high-energy proton beams from fast-ignition (FI) -related hemisphere-cone assembled targets have been numerically studied by hybrid particle-in-cell simulations and compared with those from planar-foil and open-hemisphere targets. The whole physical process including the laser-plasma interaction has been self-consistently modeled for 15 ps, at which time the protons reach asymptotic motion. It is found that the achievable focus of proton beams is limited by the thermal pressure gradients in the co-moving hot electrons, which induce a transverse defocusing electric field that bends proton trajectories near the axis. For the advanced hemisphere-cone target, the flow of hot electrons along the cone wall induces a local transverse focusing sheath field, resulting in a clear enhancement in proton focusing; however, it leads to a significant loss of longitudinal sheath potential, reducing the total conversion efficiency from laser to protons.

Emission of energetic protons from relativistic intensity laser interaction with a cone-wire target

Emission of energetic protons (maximum energy ∼18 MeV) from the interaction of relativistic intensity laser with a cone-wire target is experimentally measured and numerically simulated with hybrid particle-in-cell code, lsp [D. R. Welch et al., Phys. Plasmas 13, 063105 (2006)]. The protons originate from the wire attached to the cone after the OMEGA EP laser (670 J, 10 ps, 5 × 10^{18} W/cm^{2}) deposits its energy inside the cone. These protons are accelerated from the contaminant layer on the wire surface, and are measured in the radial direction, i.e., in a direction transverse to the wire length. Simulations show that the radial electric field, responsible for the proton acceleration, is excited by three factors, viz., (i) transverse momentum of the relativistic fast electrons beam entering into the wire, (ii) scattering of electrons inside the wire, and (iii) refluxing of escaped electrons by "fountain effect" at the end of the wire. The underlying physics of radial electric field and acceleration of protons is discussed.

First Report of Broad bean wilt virus 2 in Echinacea purpurea in China

Field-grown Echinacea purpurea plants showing necrosis, leaf roll, yellow mosaic, and mosaic symptoms in leaves were collected in June 2010 in Huairou, Beijing, China. ELISAs of extracts of four samples showed that one sample with mosaic symptoms had a positive reaction with Broad bean wilt virus 2 (BBWV-2) monoclonal antibody provided by Professor X. P. Zhou (1). The monoclonal antibody recognized the 44.7 kD coat protein subunit of BBWV-2. We used Chenopodium quinoa as an assay species to isolate the virus by sap transmissions and to maintain the virus strain. Sap from infected C. quinoa, when inoculated onto indicator plant species, induced the following symptoms: C. quinoa: local lesions in inoculated leaves, systemic chlorotic mottle in upper leaves, deformation, and apical necrosis; C. amaranticolor: chlorotic local lesions, systemic mosaic and leaf distortion; Nicotiana benthamiana: systemic mosaic; Gomphrena globosa: local purple spots in inoculated leaves and systemic infection in upper leaves; Tetragonia expansa: local lesions, but no symptoms of systemic infection; Physalis floridana: systemic mosaic. No symptoms were observed on Capsicum annuum, Datura stramonium, N. glutinosa, or N. tabacum cv. White Burley. To confirm BBWV-2 infection, total RNAs extracted from infected C. quinoa leaves were reverse transcripted to cDNA using oligo-dT primer (T17V). The primer pair Fab5'R1F (5'-AAATATTAAAACAAACAGCTTTCGTT-3') and Fab5'R1R (5'-TTCAAAGCTCGTGCCATNTYATTKGC-3') for specific detection of the Fabavirus genus (2) was used for PCR analysis. The amplified fragment is between the 5'-terminal non-translatable region (NTR) and the beginning of the coding region of RNA1. Amplicons of approximately the expected size (~391 bp) were produced from the virus-infected C. quinoa and a BBWV-2 positive control (ATCC PV131, PV0537). Amplicons of approximately the expected size (~350 bp) were produced from the BBWV-1 positive control (ATCC PV132). However, no such amplicons were observed from healthy C. quinoa plants and water control. The 391-bp amplicons of RNA1 obtained from the infected C. quinoa were cloned and sequenced. Comparison with sequences of other BBWV-2 isolates showed that the isolate we obtained (No. JX070674) had approximately 99% nt identity (98% amino acid identity) with Chinese BBWV-2 isolate BC (No. FJ485686.1) (3). As an ornamental and medicinal plant, E. purpurea is widely cultivated in northern China. Up until now, Tomato ring spot virus, Tobacco rattle virus, Cucumber mosaic virus, and Tomato spotted wilt virus have been detected or isolated from E. purpurea in the world (4). To our knowledge, this is the first report of BBWV-2 infecting E. purpurea in China. BBWV-2-infected E. purpurea may have less secondary metabolites, which could influence the quality and therapeutic efficacy of this herbal medicine. References: (1) L. Qing et al. Acta Microbiologica Sinica 40:166, 2000. (2) R. M. Ferrer et al. J. Virol. Methods 144:156, 2007. (3) C. Sui et al. Plant Dis. 93:844, 2009. (4) B. Dikova. Bulgarian J. Agric. Sci. 17:306, 2011.

Numerical modeling of fast electron generation in the presence of preformed plasma in laser-matter interaction at relativistic intensities

Fast electron generation in the presence of coronal plasma in front of a solid target (typically referred to as preformed plasma) in laser-matter interaction in the intensity range of 10(19)-10(21) W/cm(2) is studied in a one-dimensional slab approximation with particle-in-cell (PIC) simulations. Three different preformed plasma density scale lengths of 1, 5, and 15 μm are considered. We report an increase in both mean and maximum energy of generated fast electrons with an increase in the preformed plasma scale length (in the range 1-15 μm). The heating of plasma electrons is predominantly due to their stochastic motion in counterpropagating electromagnetic (EM) waves (incident and reflected waves) and the presence of a longitudinal electric field produced self-consistently inside the preformed plasma. The synergetic effects of this longitudinal electric field and EM waves responsible for the efficient preformed plasma electrons heating are discussed.

Fast advection of magnetic fields by hot electrons

Experiments where a laser-generated proton beam is used to probe the megagauss strength self-generated magnetic fields from a nanosecond laser interaction with an aluminum target are presented. At intensities of 10(15)   W  cm(-2) and under conditions of significant fast electron production and strong heat fluxes, the electron mean-free-path is long compared with the temperature gradient scale length and hence nonlocal transport is important for the dynamics of the magnetic field in the plasma. The hot electron flux transports self-generated magnetic fields away from the focal region through the Nernst effect [A. Nishiguchi, Phys. Rev. Lett. 53, 262 (1984)] at significantly higher velocities than the fluid velocity. Two-dimensional implicit Vlasov-Fokker-Planck modeling shows that the Nernst effect allows advection and self-generation transports magnetic fields at significantly faster than the ion fluid velocity, v(N)/c(s)≈10.

Limitation on prepulse level for cone-guided fast-ignition inertial confinement fusion

The viability of fast-ignition (FI) inertial confinement fusion hinges on the efficient transfer of laser energy to the compressed fuel via multi-MeV electrons. Preformed plasma due to the laser prepulse strongly influences ultraintense laser plasma interactions and hot electron generation in the hollow cone of an FI target. We induced a prepulse and consequent preplasma in copper cone targets and measured the energy deposition zone of the main pulse by imaging the emitted K_{alpha} radiation. Simulation of the radiation hydrodynamics of the preplasma and particle in cell modeling of the main pulse interaction agree well with the measured deposition zones and provide an insight into the energy deposition mechanism and electron distribution. It was demonstrated that a under these conditions a 100 mJ prepulse eliminates the forward going component of approximately 2-4 MeV electrons.

Effect of reentrant cone geometry on energy transport in intense laser-plasma interactions

The energy transport in cone-guided low- Z targets has been studied for laser intensities on target of 2.5x10(20) W cm(-2). Extreme ultraviolet (XUV) imaging and transverse optical shadowgraphy of the rear surfaces of slab and cone-slab targets show that the cone geometry strongly influences the observed transport patterns. The XUV intensity showed an average spot size of 65+/-10 microm for slab targets. The cone slabs showed a reduced spot size of 44+/-10 microm. The shadowgraphy for the aforementioned shots demonstrate the same behavior. The transverse size of the expansion pattern was 357+/-32 microm for the slabs and reduced to 210+/-30 microm. A transport model was constructed which showed that the change in transport pattern is due to suppression of refluxing electrons in the material surrounding the cone.

Hot-electron temperature and laser-light absorption in fast ignition

Experimental data [F. N. Beg, Phys. Plasmas 4, 447 (1997)10.1063/1.872103] indicate that for intense short-pulse laser-solid interactions at intensities up to 5 x 10(18) W cm(-2) the hot-electron temperature proportional, variant(Ilambda(2)) (1/3). A fully relativistic analytic model based on energy and momentum conservation laws for the laser interaction with an overdense plasma is presented here. A general formula for the hot-electron temperature is found that closely agrees with the experimental scaling over the relevant intensity range. This scaling is much lower than ponderomotive scaling. Examination of the electron forward displacement compared to the collisionless skin depth shows that electrons experience only a fraction of a laser-light period before being accelerated forward beyond the laser light's penetration region. Inclusion of backscattered light in a modified model indicates that light absorption approaches 80%-90% for intensity >10(19) W cm(-2).

Diagnostics for fast ignition science (invited)

The ignition concept for electron fast ignition inertial confinement fusion requires sufficient energy be transferred from an approximately 20 ps laser pulse to the compressed fuel via approximately MeV electrons. We have assembled a suite of diagnostics to characterize such transfer, simultaneously fielding absolutely calibrated extreme ultraviolet multilayer imagers at 68 and 256 eV; spherically bent crystal imagers at 4.5 and 8 keV; multi-keV crystal spectrometers; MeV x-ray bremmstrahlung, electron and proton spectrometers (along the same line of sight), and a picosecond optical probe interferometer. These diagnostics allow careful measurement of energy transport and deposition during and following the laser-plasma interactions at extremely high intensities in both planar and conical targets. Together with accurate on-shot laser focal spot and prepulse characterization, these measurements are yielding new insights into energy coupling and are providing critical data for validating numerical particle-in-cell (PIC) and hybrid PIC simulation codes in an area crucial for fast ignition and other applications. Novel aspects of these diagnostics and how they are combined to extract quantitative data on ultrahigh intensity laser-plasma interactions are discussed.

Effect of relativistic plasma on extreme-ultraviolet harmonic emission from intense laser-matter interactions

Experiments were performed in which intense laser pulses (up to 9x10(19) W/cm(2)) were used to irradiate very thin (submicron) mass-limited aluminum foil targets. Such interactions generated high-order harmonic radiation (greater than the 25th order) which was detected at the rear of the target and which was significantly broadened, modulated, and depolarized because of passage through the dense relativistic plasma. The spectral modifications are shown to be due to the laser absorption into hot electrons and the subsequent sharply increasing relativistic electron component within the dense plasma.

Magnetic reconnection and plasma dynamics in two-beam laser-solid interactions

We present measurements of a magnetic reconnection in a plasma created by two laser beams (1 ns pulse duration, 1 x 10(15) W cm(-2)) focused in close proximity on a planar solid target. Simultaneous optical probing and proton grid deflectometry reveal two high velocity, collimated outflowing jets and 0.7-1.3 MG magnetic fields at the focal spot edges. Thomson scattering measurements from the reconnection layer are consistent with high electron temperatures in this region.

Collimated multi-MeV ion beams from high-intensity laser interactions with underdense plasma

A beam of multi-MeV helium ions has been observed from the interaction of a short-pulse high-intensity laser pulse with underdense helium plasma. The ion beam was found to have a maximum energy for He2+ of (40(+3)(-8)) MeV and was directional along the laser propagation path, with the highest energy ions being collimated to a cone of less than 10 degrees. 2D particle-in-cell simulations show that the ions are accelerated by a sheath electric field that is produced at the back of the gas target. This electric field is generated by transfer of laser energy to a hot electron beam, which exits the target generating large space-charge fields normal to its boundary.

The generation of mono-energetic electron beams from ultrashort pulse laser-plasma interactions

The physics of the interaction of high-intensity laser pulses with underdense plasma depends not only on the interaction intensity but also on the laser pulse length. We show experimentally that as intensities are increased beyond 10(20) W cm(-2) the peak electron acceleration increases beyond that which can be produced from single stage plasma wave acceleration and it is likely that direct laser acceleration mechanisms begin to play an important role. If, alternatively, the pulse length is reduced such that it approaches the plasma period of a relativistic electron plasma wave, high-power interactions at much lower intensity enable the generation of quasi-mono-energetic beams of relativistic electrons.

Broad energy spectrum of laser-accelerated protons for spallation-related physics

A beam of MeV protons, accelerated by ultraintense laser-pulse interactions with a thin target foil, is used to investigate nuclear reactions of interest for spallation physics. The laser-generated proton beam is shown (protons were measured) to have a broad energy distribution, which closely resembles the expected energy spectrum of evaporative protons (below 50 MeV) produced in GeV-proton-induced spallation reactions. The protons are used to quantify the distribution of residual radioisotopes produced in a representative spallation target (Pb), and the results are compared with calculated predictions based on spectra modeled with nuclear Monte Carlo codes. Laser-plasma particle accelerators are shown to provide data relevant to the design and development of accelerator driven systems.

Observations of the filamentation of high-intensity laser-produced electron beams

Filamented electron beams have been observed to be emitted from the rear of thin solid targets irradiated by a high-intensity short-pulse laser when there is low-density plasma present at the back of the target. These observations are consistent with a laser-generated beam of relativistic electrons propagating through the target, which is subsequently fragmented by a Weibel-like instability in the low-density plasma at the rear. These measurements are in agreement with particle-in-cell simulations and theory, since the filamentation instability is predicted to be dramatically enhanced when the electron beam density approaches that of the background plasma.

Ion acceleration by collisionless shocks in high-intensity-laser-underdense-plasma interaction

Ion acceleration by the interaction of an ultraintense short-pulse laser with an underdense-plasma has been studied at intensities up to 3 x 10(20) W/cm(2). Helium ions having a maximum energy of 13.2+/-1.0 MeV were measured at an angle of 100 degrees from the laser propagation direction. The maximum ion energy scaled with plasma density as n(0.70+/-0.05)(e). Two-dimensional particle-in-cell simulations suggest that multiple collisionless shocks are formed at high density. The interaction of shocks is responsible for the observed plateau structure in the ion spectrum and leads to an enhanced ion acceleration beyond that possible by the ponderomotive potential of the laser alone.

Characterization of proton and heavier ion acceleration in ultrahigh-intensity laser interactions with heated target foils

Proton and heavy ion acceleration in ultrahigh intensity ( approximately 2 x 10(20) W cm(-2) ) laser plasma interactions has been investigated using the new petawatt arm of the VULCAN laser. Nuclear activation techniques have been applied to make the first spatially integrated measurements of both proton and heavy ion acceleration from the same laser shots with heated and unheated Fe foil targets. Fe ions with energies greater than 10 MeV per nucleon have been observed. Effects of target heating on the accelerated ion energy spectra and the laser-to-ion energy conversion efficiencies are discussed. The laser-driven production of the long-lived isotope (57 )Co (271 days) via a heavy ion induced reaction is demonstrated.

High-intensity-laser-driven Z pinches

Experiments were performed in which ultrahigh intensity laser pulses (I>5 x 10(19) W cm(-2)) were used to irradiate thin wire targets. It was observed that such interactions generate a large number of relativistic electrons which escape the target and induce multimega ampere return currents within the wire. MHD instabilities can subsequently be observed in the pinching plasma along with field emission of electrons from nearby objects. Coherent optical transition radiation from adjacent objects was also observed.

Demonstration of fusion-evaporation and direct-interaction nuclear reactions using high-intensity laser-plasma-accelerated ion beams

Heavy-ion induced nuclear reactions in materials exposed to energetic ions produced from high-intensity (approximately 5 x 10(19) W/cm(2)) laser-solid interactions have been experimentally investigated for the first time. Many of the radionuclides produced result from the creation of "compound nuclei" with the subsequent evaporation of proton, neutron, and alpha particles. Results are compared with previous measurements with monochromatic ion beams from a conventional accelerator. Measured nuclide yields are used to diagnose the acceleration of ions from laser-ablated plasma to energies greater than 100 MeV.

Proton acceleration from high-intensity laser interactions with thin foil targets

Measurements of energetic proton production resulting from the interaction of high-intensity laser pulses with foil targets are described. Through the use of layered foil targets and heating of the target material we are able to distinguish three distinct populations of protons. One high energy population is associated with a proton source near the front surface of the target and is observed to be emitted with a characteristic ring structure. A source of typically lower energy, lower divergence protons originates from the rear surface of the target. Finally, a qualitatively separate source of even lower energy protons and ions is observed with a large divergence. Acceleration mechanisms for these separate sources are discussed.

Large-amplitude plasma wave generation with a high-intensity short-pulse beat wave

A short-pulse laser beat wave scheme for advanced particle accelerator applications is examined. A short, intense (3-ps, >10(18)-W cm(-2)) two-frequency laser pulse is produced by use of a modified chirped-pulse amplification scheme and is shown to produce relativistic plasma waves during interactions with low-density plasmas. The generation of plasma waves was observed by measurement of forward Raman scattering. Resonance was found to occur at an electron density many times that expected, owing to ponderomotive displacement of plasma within the focal region.

Ion heating and thermonuclear neutron production from high-intensity subpicosecond laser pulses interacting with underdense plasmas

Thermonuclear fusion neutrons produced by D(d,n)3He reactions have been measured from the interaction of a high-intensity laser with underdense deuterium plasmas. For an input laser energy of 62 J, more than (1.0+/-0.2)x10(6) neutrons with a mean kinetic energy of (2.5+/-0.2) MeV were detected. These neutrons were observed to have an isotropic angular emission profile. By comparing these measurements with those using a secondary solid CD2 target it was determined that neutrons are produced from direct ion heating during this interaction.

Recycling and reuse of industrial wastes in Taiwan

Eighteen million metric tons of industrial wastes are produced every year in Taiwan. In order to properly handle the industrial wastes, the Taiwan Environmental Protection Administration (Taiwan EPA) has set up strategic programs that include establishment of storage, treatment, and final disposal systems, establishment of a management center for industrial wastes, and promotion of recycling and reuse of industrial wastes. The Taiwan EPA has been actively promoting the recycling and reuse of industrial wastes over the years. In July 1995 the Taiwan EPA amended and promulgated the Criteria for the Industrial Waste Storage, Collection and Processing Facility, July, 1995 that added articles related to general industrial waste recycling and reuse. In June 1996 the Taiwan EPA promulgated the Non-listed General Industrial Waste Reuse Application Procedures, June, 1996, followed by the Regulations Governing the Permitting of Hazardous Industrial Waste Reuse, June 1996, setting up a full regulatory framework for governing industrial waste reuse. To broaden the recycling and reuse of general industrial wastes, the Taiwan EPA has listed 14 industrial waste items for recycling and reuse, including waste paper, waste iron, coal ash, tempered high furnace bricks (cinder), high furnace bricks (cinder), furnace transfer bricks (cinder), sweetening dregs, wood (whole/part), glass (whole/part), bleaching earth, ceramics (pottery, brick, tile and cast sand), individual metal scraps (copper, zinc, aluminum and tin), distillery grain (dregs) and plastics. As of June 1999, 99 applications for reuse of industrial wastes had been approved with 1.97 million metric tons of industrial wastes being reused.