Evaluation of Anterior Tibial Translation Under Physiological Axial Load After ACL Reconstruction With Lateral Extra-articular Tenodesis

Background

Postoperative laxity correlates with negative clinical outcomes after anterior cruciate ligament reconstruction (ACLR). The influence of lateral extra-articular tenodesis (LET) on anteroposterior translation is unclear.

Purpose/Hypothesis

This study aimed to evaluate the reduction in radiographic static anterior tibial translation (SATT) and dynamic anterior tibial translation (DATT) after LET as an adjunctive procedure to ACLR. It was hypothesized that adding a LET procedure would have no effect on postoperative SATT and DATT.

Study Design

Cohort study; Level of evidence, 3.

Methods

Patients who underwent primary ACLR with hamstring tendon autografts between 2020 and 2022 were reviewed, and those who underwent ACLR and LET as an anterolateral associate procedure were paired 1 to 1 with those who underwent isolated ACLR (control) based on age, sex, preoperative SATT, and posterior tibial slope (PTS). The indications for LET were age <18 years and anterolateral rotary instability (grade ≥2 pivot shift). A previously validated technique was used to measure SATT, DATT, and PTS on lateral weightbearing and lateral stress knee radiographs. Preoperative and 9-month postoperative radiographs were compared between the 2 groups.

Results

A total of 72 patients were included in the analysis (n = 36 patients in each group). The inter- and intraobserver reliability of the SATT, DATT, and PTS measurements was excellent (intraclass correlation coefficients, 0.88-0.99). The mean pre- and postoperative SATT in the ACLR+LET group was 2.44 ± 2.90 mm and 2.44 ± 2.38 mm, respectively, compared with 2.60 ± 2.99 mm and 2.12 ± 2.74 mm, respectively, in the control group. The mean pre- and postoperative reduction in side-to-side DATT in the ACLR+LET group was 5.44 ± 4.65 mm and 1.13 ± 2.95 mm, respectively, compared with 5.03 ± 3.66 mm and 2 ± 3.12 mm, respectively, in the control group. There was no pre- to postoperative difference in SATT (P = .51). However, the side-to-side DATT was reduced by 3.66 ± 3.37 mm postoperatively (P < .001), without significant differences between groups (P = .24).

Conclusion

Including a LET procedure for patients undergoing ACLR did not reduce SATT; that is, it did not decrease the amount of tibial translation due to physiological axial load.

Anterior cruciate ligament zoobiquity: Can man's best friend tell us we are being too cautious with the implementation of osteotomy to correct posterior tibial slope

Anterior cruciate ligament (ACL) reconstruction (ACLR) is used to treat clinical instability post ACL rupture, however, there is a high rate of incomplete return to sport and rerupture. There is increasing interest in posterior tibial slope as an intrinsic risk factor for ACLR failure and persistent instability. Zoobiquity describes the collaboration between the human and veterinary professions in order to advance the scientific understanding of both fields. Given the cranial cruciate ligament (CCL) in dogs is synonymous with the anterior cruciate ligament in humans, functioning to control internal rotation and anterior translation, but osteotomies, rather than ligament reconstruction, are the mainstay of treatment for CCL rupture, this editorial sort to gain insights into this form of treatment from the veterinary world. Level of Evidence: Level V, evidence.

Absorbable Sutures Repair Without Meniscopexy, Results in Superior Outcomes for Discoid Lateral Meniscus With Meniscocapsular Anterior Detachment in Children

BACKGROUND

Despite the fact that meniscocapsular anterior detachment is the most common location of instability in children with a Discoid Lateral Meniscus (DLM), there is a lack of consensus about the type of repair that should be utilized for stabilization. The aim of this study was to determine the best fixation method for anterior detachment of DLM in children. Our hypothesis was that excessive rigidity with fixation would restrict meniscal mobility and increase the rate of failure or prevent full knee flexion.

METHODS

This study was a retrospective single-center study consisting of 51 consecutive knees (45 children) with menico-capsular anterior detachment that underwent stabilization and minimal saucerization of the meniscus between 2007 and 2018. We aimed to compare the need for revision surgery and knee flexion between the different types of fixations utilized; namely we compared meniscopexy using anchors on the tibia (n=30) with outside-in arthroscopic soft tissue fixation (n=21), and absorbable (n=18) and nonabsorbable sutures (n=33) were compared.

RESULTS

The mean age at surgery was 10.4 years (3 to 17) with a mean follow-up of 52 months (18 to 148). The group of knees treated with absorbable sutures had a significantly better rate of full knee flexion (15/18) compared with the nonabsorbable group (17/33) ( P =0.03). Despite the absence of significance ( P =007), there was a lower rate of revision surgery due to suture failure in the soft tissue fixation group (0 revision operations) compared with the meniscopexy group (5 revision operations).

CONCLUSIONS

For anterior meniscocapsular detachment of DLM, it is recommended to perform soft tissue fixation with absorbable sutures, as this technique resulted in better knee flexion and a lower rate of revision surgery when compared with meniscopexy and nonabsorbable suture fixation.

LEVEL OF EVIDENCE

Level III-retrospective case studies.

Radiographic Investigation of Coronal Plane and Patellar Height and Changes Following Tibial Deflection Osteotomy for Correction of Tibial Slope in Combination With ACL Reconstruction

BACKGROUND

A tibial deflexion osteotomy (TDO) is performed to decrease the sagittal tibial slope to reduce the relative risk of anterior cruciate ligament (ACL) reconstruction (ACLR) graft failure. Given that coronal plane osteotomies can cause consequential changes in the sagittal plane to patellar height and tibial slope, potential changes to coronal plane alignment and patellar height can result after a sagittal plane osteotomy.

PURPOSE

To compare preoperative and postoperative coronal plane alignment after TDO, as well as to analyze the effect of the osteotomy on patellar height.

STUDY DESIGN

Case series; Level of evidence, 4.

METHODS

This study was conducted on a consecutive series of patients with primary and revision ACLR with concomitant TDO between 2011 and 2022. Inclusion criteria were 1-stage autograft ACLR combined with supratubercular TDO with pre- and 3 months postoperative radiographs of sufficient quality. Indications for TDO were anterior instability requiring ACL revision surgery and a posterior tibial slope (PTS) >9° or a PTS >14° in the primary ACL surgery patients. Anteroposterior and lateral knee radiographs were reviewed, and the medial proximal tibial angle (MPTA), PTS, Caton-Deschamps index (CDI), and modified Insall-Salvati ratio were measured directly from the radiographs by 2 independent reviewers.

RESULTS

A total of 68 patients were included in this study. Pre- and postoperative radiographs were performed 1 month before and 3 months after surgery, respectively. There was a significant increase in the mean MPTA of 0.95° varus (SD, 2.1°; range, increase of 4.23° valgus to increase of 7.74° varus; P < .01), a decreased PTS of 8.86° (SD, 3.03°; P < .01), and an increased CDI of 0.08 (range, decrease of 0.27 to increase of 0.64) (P < .01; SD, 0.17) in patients undergoing TDO. Insall-Salvati ratio measurements showed no difference. There was good intra- and interobserver reliability, with intraclass correlation coefficients of 0.97 and 0.91 for MPTA, 0.97 and 0.87 for PTS, 0.87 and 0.93 for CDI, and 0.88 and 0.76 the Insall-Salvati ratio.

CONCLUSION

This study, the largest series on TDO for ACLR, demonstrates that the TDO can be performed safely without large changes to coronal alignment or patellar height. The tibial slope was reduced by a mean of 8.86° (range, 2.3°-11.5°; P < .01). The TDO produces a small statistically significant change to coronal alignment, inducing a mean increased varus of <1° and an increased patellar height of 0.1 CDI. Therefore, TDO can be performed safely without dramatic changes to coronal alignment or patellar height, this study highlights technical aspects to minimize iatrogenic varus.

Four to 6° Is the Target Posterior Tibial Slope After Tibial Deflection Osteotomy According to the Knee Static Anterior Tibial Translation

PURPOSE

To correlate changes in posterior tibial slope (PTS) with changes to static anterior tibial translation (SATT) with tibial deflexion osteotomy (TDO), in order to define a target postoperative tibial slope based on postoperative SATT.

METHODS

We reviewed a consecutive series of primary and revision anterior cruciate ligament reconstruction with TDO between 2011 and 2022. PTS and SATT were measured pre- and postoperatively directly from the radiographs by 2 independent reviewers. Regression analysis was performed to investigate the relationship of postoperative SATT with PTS, gender, graft type, and meniscal injury.

RESULTS

A total of 48 patients were included in this study. The mean (SD) decrease in PTS and SATT was 8.85° (3.03°; 12.5° to 3.59°, P < .01), and 7.93 mm (3.68; 5.37 to -2.55 mm, P < .01), respectively. Upon univariate analysis, the only factor influencing ΔSATT was ΔPTS. For each 1° of decreased slope, SATT was reduced by 0.46 mm. The mean (SD) PTS for a negative SATT was 2.81° (2.78°) compared to 5.09° (3.25°) for a SATT of 0 to 5mm (P < .01).

CONCLUSIONS

This study reports weightbearing SATT in association with PTS after TDO. The TDO successfully reduced the SATT, with the change in PTS the only significant predictor of postoperative SATT. Based on our results, our previously held target of 2° to 5° PTS overcorrected the SATT. Therefore, considering as a goal 0 to 5 mm of SATT, we suggest a new target of 4° to 6° PTS.

LEVEL OF EVIDENCE

Level IV, retrospective cohort study.

Transtibial Lateral Meniscal Root Repair Technique to Appose Remnant Root With Torn Body: The Double Compression Knot

Anterior cruciate ligament reconstructions are often performed with associated procedures, most commonly for associated meniscal tears. The lateral meniscal root tear is a commonly associated injury, which increases rotational instability and results in altered tibiofemoral biomechanics. Lateral meniscectomy results in poorer functional and long-term outcomes, making repair vital. The position of the lateral root tear makes its repair technique complicated. Because of the proximity to vessels posteriorly, the all-inside technique is considered potentially unsafe, and current transtibial repair techniques fail to appose the body with the root remnant. In the lineage of Laprade, who proclaimed the use of a transtibial suture for radial tears elsewhere in the knee in order to reduce the shear force, we describe a transtibial technique that optimizes meniscal apposition, theoretically improving the repair biomechanics and is technically easier to perform in comparison to suture hook techniques with one tunnel and one suture.

Medial Closing-Wedge Patellar Osteotomy in Patients With Patellofemoral Instability

Trochlear dysplasia is the main anatomical risk factor for objective patellar instability. Surgical correction of trochlea dysplasia via a trochleoplasty has been described with good clinical results reported. Concerns remain for who have abnormal patellofemoral tracking post a trochleoplasty due to incongruence between the two articulating surfaces. We described a medial closing wedge patellar osteotomy to improve congruency of the patellofemoral joint post-trochleoplasty.

Radiographic Investigation of Differences in Static Anterior Tibial Translation With Axial Load Between Isolated ACL Injury and Controls

BACKGROUND

Static anterior tibial translation (SATT) is radiographically measured to show the amount of tibial translation during the single-leg stance, and thus it is representative of the physiological axial load subjected to the anterior cruciate ligament (ACL) during the stance. Increased SATT has been associated with increased posterior tibial slope (PTS) and is also associated with increased graft failure.

PURPOSE

To compare the SATT value in a control population with that in a population with an isolated ACL injury, as well as to compare the effect of tibial slope on SATT between the 2 groups.

STUDY DESIGN

Cohort study; Level of evidence, 3.

METHODS

A consecutive series of patients without ligamentous or meniscal injuries between 2019 and 2022 was reviewed. A matched consecutive cohort of patients with nonacute ACL injuries (surgery between 6 and 12 weeks after injury) without concomitant pathology was reviewed. Preoperative SATT and PTS were measured with a previously validated technique on lateral weightbearing knee radiographs. The SATT value was determined, and regression analysis was performed to investigate the relationship between SATT and PTS.

RESULTS

In total, 101 controls and 115 patients with an ACL injury were included in this study. The mean SATT was 1.31 mm (SD, 2.44 mm) and the mean PTS was 10.61° (SD, 3.28°) in the control cohort. The SATT was larger (mean, 2.27 mm; SD, 3.36 mm) in the ACL-injured cohort despite the tibial slope measurement being less in the ACL-injured cohort (mean, 9.46°; SD, 2.85°; P = .016). Linear regression analysis showed that for every 1° of increase in PTS, there was a 0.34-mm increase in SATT in the control cohort; however, there was a greater increase of 0.5 mm for every 1° of increase in PTS in the ACL-injured cohort. We found no significant differences in SATT when the cohorts were compared by age (P = .26) or sex (P = .10).

CONCLUSION

The present study reports a reference SATT value of 1.31 mm (SD, 2.44 mm) in a non-ACL-injured cohort, which was lower than in the ACL-injured cohort (mean, 2.27 mm; SD, 3.36 mm). The effect of slope on weightbearing anterior tibial translation was greater in the ACL-injured population than in the control cohort.

Patellar tendon angle is not elevated in ACL-injured subjects, suggesting methods to correct should focus on prehabilitation and rehabilitation rather than surgery

Purpose

The aim of the study was to explore if the patellar tendon angles (PTAs) is an intrinsic risk factor for anterior cruciate ligament (ACL) rupture. We hypothesised that the PTAs will be increased in ACL rupture patients compared to matched controls.

Methods

We performed a retrospective radiographic cohort study. A cohort of ACL-injured patients between 2019 and 2022 was utilised. The control population, from the same time period, was a consecutive series of 100 patients without ligament or meniscal injuries which were prospectively added to our institutional registry. Posterior tibial slope (PTS), static anterior tibial translation (SATT), patellar tendon to tibial plateau angle (PT-TPA), patellar tendon-tibial shaft angle (PT-TSA) were measured.

Results

A total of 100 patients were included in the control cohort and 110 in the ACL cohort. The PT-TPA was significantly less in the ACL cohort compared to the control cohort, mean and SD of 15.33 (±5.74) versus 13.91 (±5.68), respectively (p = 0.01). PT-TSA was also less in the ACL cohort, mean and SD of 116.15 (±5.89) versus 114.27 (±4.81), however, this failed to reach statistical significance (p = 0.08). The PT-TPA was not correlated with PTS (p = 0.65) and the PT-TSA was inversely correlated with PTS; Pearson correlation coefficient of -0.28 (p < 0.01). The PT-TSA had a greater correlation -0.4 (p < 0.01) with SATT than PTS 0.37 (p < 0.01).

Conclusion

PTAs are not elevated in ACL-injured subjects. While anteriorisation of the tibial tubercle is utilised in dogs to decrease the anterior thrust resulting from the anteriorly directed vector of the quadriceps, this treatment in the humans is not warranted and methods to reduce the PTAs should focus on prehabilitation and rehabilitation.

Level of Evidence

Level III.

A non-weight bearing protocol after ACL reconstruction improves static anterior tibial translation in patients with elevated slope and increased weight bearing tibial anterior translation

PURPOSE

Aim of this study is to evaluate the impact of a non-weight bearing (NWB) protocol within 21 post-operative days after anterior cruciate ligament (ACL) reconstruction on static and dynamic anterior tibial translations (SATT and DATT, respectively). The hypothesis is that delayed WB would improve ATT at 9 months follow-up.

METHODS

A series of patients treated with ACL reconstruction was retrospectively reviewed, comparing a group with immediate post-operative weight bearing (WB group) and a group without post-operative weight bearing (NWB group). The NWB protocol was applied to patients with posterior tibial slope (PTS) ≥ 12°, pre-operative SATT ≥ 5 mm, and/or meniscal lesions of root or radial type. SATT, and PTS were measured on 20° flexion monopodal lateral x-rays, while DATT on Telos™ x-rays at pre-operative and 9-months follow-up.

RESULTS

One hundred seventy-nine patients were included (50 NWB group, 129 WB group). The SATT worsened in the WB group with a mean increase of 0.7 mm (SD 3.1 mm), while in the NWB group, the SATT improved with a mean decrease of 1.4 mm (SD 3.1 mm) from the pre-operative to 9 months' follow-up (p < 0.001). The side-to-side Telos™ evaluation showed a significant improvement in DATT within both the groups (p < 0.001), but there was no difference between the two groups (p = 0.99).

CONCLUSION

The post-operative protocol of 21 days without WB led to an improvement in SATT at 9 months without an influence on DATT, and it is recommended for patients with a SATT ≥ 5 mm and/or a PTS ≥ 12° as part of an "à la carte" approach to ACL reconstruction.

LEVEL OF EVIDENCE

Level IV, Retrospective case series.

Fatigue implications for bending orthopaedic plates

OBJECTIVES

- We aimed to investigate how pre-bending affects the mechanical properties, specifically fatigue, of stainless-steel plates.

METHODS

- 3.5mm LCP 10-hole plates were pre-bent in 1, 2 and 3 locations to the same overall degree and fatigue testing performed. Finite Element Analysis (FEA) was performed in Strand7 (version 2.4.6) to better understand the failure point of the plates in four-point bending.

RESULTS

- Six different plate pre-bending conditions were tested for resistance to fatigue failure. Increasing the number of pre-bends improved the fatigue resistance with two pre-bends having a mean 509,304 cycles to failure and three pre-bends 491,378 cycles to failure. The region of highest stress and the point of fatigue failure were at the plate's minimum cross-sectional area, which was predicted by the FEA and confirmed with mechanical testing. For plates pre-bent in two locations, the fatigue failure always occurred in the screw hole not in between the positions of the two pre-bends. Non-linear FEA simulation confirmed that work hardening occurs around pre-bend locations, conferring increased fatigue resistance to the holes next to, or between, pre-bend locations.

CONCLUSIONS

We found that contrary to orthopaedic folklore, pre-bending of plates is not detrimental to fatigue resistance of the stainless-steel plates we tested. Pre-bending plates in a single plane increased the fatigue properties of the 10-hole stainless-steel plate tested.

Single level posterolateral lumbar fusion in a New Zealand White rabbit (Oryctolagus cuniculus) model: Surgical anatomy, operative technique, autograft fusion rates, and perioperative care

INTRODUCTION

The posterolateral lumbar fusion (PLF) New Zealand White (NZW) (Oryctolagus cuniculus) rabbit model is a long-standing surgical technique for the preclinical evaluation of materials for spinal fusion. A detailed understanding of lumbar spine anatomy and perioperative care requirements of rabbits is imperative for correct execution of the model both scientifically and ethically. This study describes the preoperative procedures and surgical techniques used in single level PLF in a NZW rabbit model as it pertains to the animal husbandry, lumbar spine anatomy, anesthesia, surgical approach, and perioperative care of rabbits in a research setting.

MATERIALS AND METHODS

We describe the surgical technique and perioperative patient care for single level PLF in a NZW rabbit model. Medical records from a single research facility were retrospectively reviewed for adult NZW rabbits that underwent single level PLF (L4-L5) between January 2016 and December 2019. The number of lumbar vertebrae per rabbit, fusion rates at 12 weeks using iliac crest autograft and complications are reported. Skeletal maturity was confirmed by preoperative fluoroscopic and radiographic documented closure of hindlimb physes.

RESULTS

The PLF rabbit surgical model and perioperative patient care is described. PLF was performed in 868 adult female entire NZW rabbits. The majority of rabbits had seven lumbar vertebrae (620/868; 71.4%), followed by six (221/868; 25.5%), and eight (27/868; 3.1%). Fusion rates at 12 weeks for PLF using iliac crest autograft as assessed by manual palpation and radiographic assessment was 76.9% and 70.0%, respectively. Postoperative complications included occasional partial autograft site wound dehiscence due to self-trauma.

CONCLUSIONS

For PLF rabbit models, a detailed understanding of the surgical technique, rabbit lumbar anatomy including number of lumbar vertebrae, and dietary and husbandry requirements of rabbits, is essential for execution of the model and animal welfare.

Moment arm function dictates patella sagittal height anatomy: Rabbit epiphysiodesis model alters limb length ratios and subsequent patellofemoral anatomical development

Patellofemoral anatomical dysplasia is associated with patellofemoral instability and pain. The closure of the knee physis occurs at the same age as the peak incidence of patellofemoral dislocation. This study determined the effect on the patellofemoral anatomical development in a rabbit epiphysiodesis model. Twenty-four skeletally immature New Zealand White rabbits were divided into three groups (a) distal femur epiphysiodesis (FE) (b) proximal tibia epiphysiodesis (TE) (c) control; no epiphysiodesis (C) performed at 6 weeks of age. The primary endpoint was shape analysis using three-dimensional reconstructions of micro-computed tomographys (CTs) performed at 30 weeks of age. The limb length ratios (femur:tibia) were significantly different for both FE (mean 0.72, SD 0.0381, P < .001) and TE (mean 0.91, SD 0.0383, P < .001) treatment groups compared to control (mean 0.81, SD 0.0073). Patella height, as measured from the most distal point of the patella to the tibial joint surface (modified Caton-Deschamps measurement), was lower (baja) in the FE and higher (alta) for the TE, compared with the control group. Our findings suggest femoral and tibial shortening can influence the development of the patellofemoral joint, which may be dictated by moment arm function and is potentially responsible for the etiology of patella alta. Future studies are warranted to explore this association further with the view for the development of treatment options for patella alta in human patients.

Inferior Medial Geniculate Artery Branch as an Anatomical Landmark for Hamstring Harvest During Anterior Cruciate Ligament Reconstruction

Graft harvesting is often a challenging step of anterior cruciate ligament reconstructions. Accurate isolation of the hamstring tendons at the pes anserinus is crucial to successful graft harvesting. We describe a technique of using a branch of the inferior medial geniculate artery overlying the pes anserinus insertion as an anatomical landmark to localize the hamstring tendons for harvest. By using this vessel as an anatomical landmark, the incision length was decreased and the time required to harvest reduced. This is a highly reproducible technique and will be beneficial for soft tissue harvesting surgeons to ease hamstring graft harvesting.

Sagittal patellar flexion angle: a novel clinically validated patellar height measurement reflecting patellofemoral kinematics useful throughout knee flexion

PURPOSE

Patellar height measurements on lateral radiographs are dependent on knee flexion which makes standardisation of measurements difficult. This study described a plain radiographic measurement of patellar sagittal height which reflects patellofemoral joint kinematics and can be used at all degrees of flexion.

METHODS

The study had two parts. Part one involved 44 normal subjects to define equations for expected patellar position based on the knee flexion angles for three new patellar height measurements. A mixed model regression with random effect for individual was used to define linear and polynomial equations for expected patellar position relating to three novel measurements of patella height: (1) patellar progression angle (trochlea), (2) patellar progression angle (condyle) and (3) sagittal patellar flexion. Part two was retrospective and involved applying these measurements to a surgical cohort to identify differences between expected and measured patellar position pre- and post-operatively.

RESULTS

All three measurements provided insight into patellofemoral kinematics. Sagittal patellar flexion was the most useful with the least residual error, was the most reliable, and demonstrated the greatest detection clinically.

CONCLUSIONS

Clinically applied radiographic measurements have been described for patellar height which reflect the sagittal motion of the patella and can be used regardless of the degree of flexion in which the radiograph was taken. The expected sagittal patellar flexion linear equation should be used to calculate expected patellar height.

LEVEL OF EVIDENCE

IV.

Wearable inertial sensors and pressure MAT detect risk factors associated with ACL graft failure that are not possible with traditional return to sport assessments

Introduction

Anterior cruciate ligament reconstruction (ACLR) is associated with poor return to sport and high graft re-rupture rates. This study explored the use of a wearable inertial sensor (ViMove) that incorporates an accelerometer and gyroscope, and MatScan pressure sensing mat (TekScan, South Boston, Massachusetts, USA) to provide objective return-to-sport measures.

Methods

Three cohorts’ ACLR patients, non-athletic controls and elite athletes (Australian seven’s rugby Olympic Gold medallist). Patients performed biometric and functional tests (thigh circumference and triple hop) and the ViMove knee module (consisting of single and double leg squats, hops and box drops) for lower limb alignment assessment, concurrently with force plate.

Results

Elite athletes had less varus/valgus (VV) movement during ViMove exercises compared with the ACLR cohort, who in turn had less VV malalignment than controls. When analysing side-to-side differences, single leg squats and box drop were asymmetrical in the ACL group, with greater malalignment in the reconstructed leg (p<0.05). Subgroup analysis failed to differentiate who passed or failed current return to sport assessment. TekScan pressure plate detected differences in double leg landing and flight time while hopping not detected with ViMove, suggesting ACL patients compensate by offloading the reconstructed leg to improve coronal alignment during double leg activity.

Conclusion

The inertial sensor detected differences in motion for patients following ACLR, which are known to be associated with graft rupture and were not detected with functional return to sport testing. Coupling the device with data from a pressure plate provides a powerful assessment tool detecting alignment differences known to be associate with graft failure only previously detected in formal gait analysis.

Treatment of patella tendinopathy by distalising tibial tubercle osteotomy

Patella tendinopathy condition is often resistant to conservative treatment. We report a case of patella tendinopathy treated by distalisation of the tibial tubercle with excellent long-term result.

Evaluation of Intrinsic Biomechanical Risk Factors in Patellar Tendinopathy: A Retrospective Radiographic Case-Control Series

Background

Patellar tendinopathy is an overuse condition often affecting athletes. It has been postulated that patellar tendinopathy is associated with patella alta; however, this and any other anatomic risk factors have not been identified.

Purpose

To explore whether lever arm differences from radiographic measurements exist between patients with and without tendinopathy. This may provide surgeons with a simple radiographic means to identify patients at risk.

Study Design

Cross-sectional study; Level of evidence, 3.

Methods

Magnetic resonance imaging scans of the knee from a sports imaging facility were screened and reviewed to identify 2 groups of patients: those with and those without imaging signs of patellar tendinopathy. The lateral radiographs were reviewed and measurements made to determine (1) lever arm ratio, (2) moment arm ratio, (3) angle between the moment and line of pull of the patellar tendon, (4) patellar tendon pivot point angle, and (5) patellar height (alta). Measurements were obtained directly from radiographs. The images and measurements were reviewed by 2 experienced orthopaedic clinicians.

Results

A total of 105 patients were included in this study: 52 with patellar tendinopathy and 53 without patellar tendinopathy (controls). The mean age was similar between groups (23 years); females accounted for 8 of 52 patients with patellar tendinopathy and 24 of 53 patients without. The lever arm ratio in the group with patellar tendinopathy versus controls was 1.71 versus 1.01 (P = .01), with a moment arm difference of 1.00 versus 0.80 (P < .01), respectively. There was no difference detected between groups for patellar tendon angle, patellar tendon pivot point angle, knee flexion angle, or incidence of patella alta. No correlation was found with our measurements and the Insall-Salvati ratio. Statistical analysis was also performed according to sex, and a statistically significant difference between groups was found for differences in lever arm ratio and moment arm.

Conclusion

The lever arm ratio and moment arm ratio from lateral radiographs were significantly different between patients with and without patellar tendinopathy. Further study is needed on the biomechanical implications of the pivot point and how altering it can affect stress within the patellar tendon, patellofemoral joint, and associated clinical outcomes.