Electrocatalytic water oxidation by a monomeric amidate-ligated Fe(III)-aqua complex

The six-coordinate Fe(III)-aqua complex [Fe(III)(dpaq)(H2O)](2+) (1, dpaq is 2-[bis(pyridine-2-ylmethyl)]amino-N-quinolin-8-yl-acetamido) is an electrocatalyst for water oxidation in propylene carbonate-water mixtures. An electrochemical kinetics study has revealed that water oxidation occurs by oxidation to Fe(V)(O)(2+) followed by a reaction first order in catalyst and added water, respectively, with ko = 0.035(4) M(-1) s(-1) by the single-site mechanism found previously for Ru and Ir water oxidation catalysts. Sustained water oxidation catalysis occurs at a high surface area electrode to give O2 through at least 29 turnovers over an 15 h electrolysis period with a 45% Faradaic yield and no observable decomposition of the catalyst.

Characterization of metastable intermediates formed in the reaction between a Mn(II) complex and dioxygen, including a crystallographic structure of a binuclear Mn(III)-peroxo species

Transition-metal peroxos have been implicated as key intermediates in a variety of critical biological processes involving O2. Because of their highly reactive nature, very few metal-peroxos have been characterized. The dioxygen chemistry of manganese remains largely unexplored despite the proposed involvement of a Mn-peroxo, either as a precursor to, or derived from, O2, in both photosynthetic H2O oxidation and DNA biosynthesis. These are arguably two of the most fundamental processes of life. Neither of these biological intermediates has been observed. Herein we describe the dioxygen chemistry of coordinatively unsaturated [Mn(II)(S(Me2)N4(6-Me-DPEN))] (+) (1), and the characterization of intermediates formed en route to a binuclear mono-oxo-bridged Mn(III) product {[Mn(III)(S(Me2)N4(6-Me-DPEN)]2(μ-O)}(2+) (2), the oxo atom of which is derived from (18)O2. At low-temperatures, a dioxygen intermediate, [Mn(S(Me2)N4(6-Me-DPEN))(O2)](+) (4), is observed (by stopped-flow) to rapidly and irreversibly form in this reaction (k1(-10 °C) = 3780 ± 180 M(-1) s(-1), ΔH1(++) = 26.4 ± 1.7 kJ mol(-1), ΔS1(++) = -75.6 ± 6.8 J mol(-1) K(-1)) and then convert more slowly (k2(-10 °C) = 417 ± 3.2 M(-1) s(-1), ΔH2(++) = 47.1 ± 1.4 kJ mol(-1), ΔS2(++) = -15.0 ± 5.7 J mol(-1) K(-1)) to a species 3 with isotopically sensitive stretches at νO-O(Δ(18)O) = 819(47) cm(-1), kO-O = 3.02 mdyn/Å, and νMn-O(Δ(18)O) = 611(25) cm(-1) consistent with a peroxo. Intermediate 3 releases approximately 0.5 equiv of H2O2 per Mn ion upon protonation, and the rate of conversion of 4 to 3 is dependent on [Mn(II)] concentration, consistent with a binuclear Mn(O2(2-)) Mn peroxo. This was verified by X-ray crystallography, where the peroxo of {[Mn(III)(S(Me2)N4(6-Me-DPEN)]2(trans-μ-1,2-O2)}(2+) (3) is shown to be bridging between two Mn(III) ions in an end-on trans-μ-1,2-fashion. This represents the first characterized example of a binuclear Mn(III)-peroxo, and a rare case in which more than one intermediate is observed en route to a binuclear μ-oxo-bridged product derived from O2. Vibrational and metrical parameters for binuclear Mn-peroxo 3 are compared with those of related binuclear Fe- and Cu-peroxo compounds.

Correlation between structural, spectroscopic, and reactivity properties within a series of structurally analogous metastable manganese(III)-alkylperoxo complexes

Manganese-peroxos are proposed as key intermediates in a number of important biochemical and synthetic transformations. Our understanding of the structural, spectroscopic, and reactivity properties of these metastable species is limited, however, and correlations between these properties have yet to be established experimentally. Herein we report the crystallographic structures of a series of structurally related metastable Mn(III)-OOR compounds, and examine their spectroscopic and reactivity properties. The four reported Mn(III)-OOR compounds extend the number of known end-on Mn(III)-(η(1)-peroxos) to six. The ligand backbone is shown to alter the metal-ligand distances and modulate the electronic properties key to bonding and activation of the peroxo. The mechanism of thermal decay of these metastable species is examined via variable-temperature kinetics. Strong correlations between structural (O-O and Mn···N(py,quin) distances), spectroscopic (E(πv*(O-O) → Mn CT band), ν(O-O)), and kinetic (ΔH(‡) and ΔS(‡)) parameters for these complexes provide compelling evidence for rate-limiting O-O bond cleavage. Products identified in the final reaction mixtures of Mn(III)-OOR decay are consistent with homolytic O-O bond scission. The N-heterocyclic amines and ligand backbone (Et vs Pr) are found to modulate structural and reactivity properties, and O-O bond activation is shown, both experimentally and theoretically, to track with metal ion Lewis acidity. The peroxo O-O bond is shown to gradually become more activated as the N-heterocyclic amines move closer to the metal ion causing a decrease in π-donation from the peroxo πv*(O-O) orbital. The reported work represents one of very few examples of experimentally verified relationships between structure and function.

The mechanism of oxidative halophenol dehalogenation by Amphitrite ornata dehaloperoxidase is initiated by H2O2 binding and involves two consecutive one-electron steps: role of ferryl intermediates

The enzymatic globin, dehaloperoxidase (DHP), from the terebellid polychaete Amphitrite ornata is designed to catalyze the oxidative dehalogenation of halophenol substrates. In this study, the ability of DHP to catalyze this reaction by a mechanism involving two consecutive one-electron steps via the normal order of addition of the oxidant cosubstrate (H(2)O(2)) before organic substrate [2,4,6-trichlorophenol (TCP)] is demonstrated. Specifically, 1 equiv of H(2)O(2) will fully convert 1 equiv of TCP to 2,6-dichloro-1,4-benzoquinone, implicating the role of multiple ferryl [Fe(IV)O] species. A significant amount of heterolytic cleavage of the O-O bond of cumene hydroperoxide, consistent with transient formation of a Compound I [Fe(IV)O/porphyrin pi-cation radical] species, is observed upon its reaction with ferric DHP. In addition, a more stable high-valent Fe(IV)O-containing DHP intermediate [Compound II (Cpd II) or Compound ES] is characterized by UV-visible absorption and magnetic circular dichroism spectroscopy. Spectral similarities are seen between this intermediate and horse heart myoglobin Cpd II. It is also shown in single-turnover experiments that the DHP Fe(IV)O intermediate is an active oxidant in halophenol oxidative dehalogenation. Furthermore, reaction of DHP with 4-chlorophenol leads to a dimeric product. The results presented herein are consistent with a normal peroxidase order of addition of the oxidant cosubstrate (H(2)O(2)) followed by organic substrate (TCP) and indicate that the enzymatic mechanism of DHP-catalyzed oxidative halophenol dehalogenation involves two consecutive one-electron steps with a dissociable radical intermediate.

Structural and spectroscopic characterization of metastable thiolate-ligated manganese(III)-alkylperoxo species

Metastable Mn-peroxo species are proposed to form as key intermediates in biological oxidation reactions involving O(2) and C-H bond activation. The majority of these have yet to be spectroscopically characterized, and their inherent instability, in most cases, precludes structural characterization. Cysteinate-ligated metal-peroxos have been shown to form as reactive intermediates in both heme and nonheme iron enzymes. Herein we report the only examples of isolable Mn(III)-alkylperoxo species, and the first two examples of structurally characterized synthetic thiolate-ligated metal-peroxos. Spectroscopic data, including electronic absorption and IR spectra, and ESI mass spectra for (16)O vs (18)O-labeled metastable Mn(III)-OOR (R = (t)Bu, Cm) are discussed, as well as preliminary reactivity.

Synthesis and structural characterization of a series of Mn(III)OR complexes, including a water-soluble Mn(III)OH that promotes aerobic hydrogen-atom transfer

Hydrogen-atom-transfer (HAT) reactions are a class of proton-coupled electron-transfer (PCET) reactions used in biology to promote substrate oxidation. The driving force for such reactions depends on both the oxidation potential of the catalyst and the pKa value of the proton-acceptor site. Both high-valent transition-metal oxo M(IV)═O (M = Fe, Mn) and lower-valent transition-metal hydroxo compounds M(III)OH (M = Fe, Mn) have been shown to promote these reactions. Herein we describe the synthesis, structure, and reactivity properties of a series of Mn(III)OR compounds [R = (p)NO2Ph (5), Ph (6), Me (7), H (8)], some of which abstract H atoms. The Mn(III)OH complex 8 is water-soluble and represents a rare example of a stable mononuclear Mn(III)OH. In water, the redox potential of 8 was found to be pH-dependent and the Pourbaix (E(p,c) vs pH) diagram has a slope (52 mV pH(-1)) that is indicative of the transfer a single proton with each electron (i.e., PCET). The two compounds with the lowest oxidation potential, hydroxide- and methoxide-bound 7 and 8, are found to oxidize 2,2',6,6'-tetramethylpiperidin-1-ol (TEMPOH), whereas the compounds with the highest oxidation potential, phenol-ligated 5 and 6, are shown to be unreactive. Hydroxide-bound 8 reacts with TEMPOH an order of magnitude faster than methoxide-bound 7. Kinetic data [kH/kD = 3.1 (8); kH/kD = 2.1 (7)] are consistent with concerted H-atom abstraction. The reactive species 8 can be aerobically regenerated in H2O, and at least 10 turnovers can be achieved without significant degradation of the "catalyst". The linear correlation between the redox potential and pH, obtained from the Pourbaix diagram, was used to calculate the bond dissociation free energy (BDFE) = 74.0 ± 0.5 kcal mol(-1) for Mn(II)OH2 in water, and in MeCN, its BDFE was estimated to be 70.1 kcal mol(-1). The reduced protonated derivative of 8, [Mn(II)(S(Me2)N4(tren))(H2O)](+) (9), was estimated to have a pKa of 21.2 in MeCN. The ability (7) and inability (5 and 6) of the other members of the series to abstract a H atom from TEMPOH was used to estimate either an upper or lower limit to the Mn(II)O(H)R pKa based on their experimentally determined redox potentials. The trend in pKa [21.2 (R = H) > 16.2 (R = Me) > 13.5 (R = Ph) > 12.2 (R = (p)NO2Ph)] is shown to oppose that of the oxidation potential E(p,c) [-220 (R = (p)NO2Ph) > -300 (R = Ph) > -410 (R = Me) > -600 (R = H) mV vs Fc(+/0)] for this particular series.

Nitrile hydration by thiolate- and alkoxide-ligated Co-NHase analogues. Isolation of Co(III)-amidate and Co(III)-iminol intermediates

Nitrile hydratases (NHases) are thiolate-ligated Fe(III)- or Co(III)-containing enzymes, which convert nitriles to the corresponding amide under mild conditions. Proposed NHase mechanisms involve M(III)-NCR, M(III)-OH, M(III)-iminol, and M(III)-amide intermediates. There have been no reported crystallographically characterized examples of these key intermediates. Spectroscopic and kinetic data support the involvement of a M(III)-NCR intermediate. A H-bonding network facilitates this enzymatic reaction. Herein we describe two biomimetic Co(III)-NHase analogues that hydrate MeCN, and four crystallographically characterized NHase intermediate analogues, [Co(III)(S(Me2)N(4)(tren))(MeCN)](2+) (1), [Co(III)(S(Me2)N(4)(tren))(OH)](+) (3), [Co(III)(S(Me2)N(4)(tren))(NHC(O)CH(3))](+) (2), and [Co(III)(O(Me2)N(4)(tren))(NHC(OH)CH(3))](2+) (5). Iminol-bound 5 represents the first example of a Co(III)-iminol compound in any ligand environment. Kinetic parameters (k(1)(298 K) = 2.98(5) M(-1) s(-1), ΔH(‡) = 12.65(3) kcal/mol, ΔS(‡) = -14(7) e.u.) for nitrile hydration by 1 are reported, and the activation energy E(a) = 13.2 kcal/mol is compared with that (E(a) = 5.5 kcal/mol) of the NHase enzyme. A mechanism involving initial exchange of the bound MeCN for OH- is ruled out by the fact that nitrile exchange from 1 (k(ex)(300 K) = 7.3(1) × 10(-3) s(-1)) is 2 orders of magnitude slower than nitrile hydration, and that hydroxide bound 3 does not promote nitrile hydration. Reactivity of an analogue that incorporates an alkoxide as a mimic of the highly conserved NHase serine residue shows that this moiety facilitates nitrile hydration under milder conditions. Hydrogen-bonding to the alkoxide stabilizes a Co(III)-iminol intermediate. Comparison of the thiolate versus alkoxide intermediate structures shows that C≡N bond activation and C═O bond formation proceed further along the reaction coordinate when a thiolate is incorporated into the coordination sphere.

A C-C bonded phenoxyl radical dimer with a zero bond dissociation free energy

The 2,6-di-tert-butyl-4-methoxyphenoxyl radical is shown to dimerize in solution and in the solid state. The X-ray crystal structure of the dimer, the first for a para-coupled phenoxyl radical, revealed a bond length of 1.6055(23) Å for the C4-C4a bond. This is significantly longer than typical C-C bonds. Solution equilibrium studies using both optical and IR spectroscopies showed that the Keq for dissociation is 1.3 ± 0.2 M at 20 °C, indicating a C-C bond dissociation free energy of -0.15 ± 0.1 kcal mol(-1). Van't Hoff analysis gave an exceptionally small bond dissociation enthalpy (BDE) of 6.1 ± 0.5 kcal mol(-1). To our knowledge, this is the smallest BDE measured for a C-C bond. This very weak bond shows a large deviation from the correlation of C-C bond lengths and strengths, but the computed force constant follows Badger's rule.

Caldariomyces fumago chloroperoxidase catalyzes the oxidative dehalogenation of chlorophenols by a mechanism involving two one-electron steps

We have employed rapid scan stopped-flow spectroscopy to examine whether the mechanism of oxidative dehalogenation catalyzed by C. fumago chloroperoxidase (CCPO) involves two consecutive one-electron steps or a single two-electron oxidation. First, we optimized the formation of CCPO compound I (CCPO-I) [Fe(IV)=O/porphyrin radical] and CCPO compound II (CCPO-II) [Fe(IV)=O] for use in double mixing rapid scan stopped-flow experiments. Reaction of CCPO-I with 2,4,6-trichlorophenol (TCP) quickly yielded CCPO-II. Reaction of CCPO-II, a one-electron oxidant, with TCP rapidly regenerated the ferric resting state of the enzyme. The rates of the reaction of both CCPO-I and -II with TCP are first-order with respect to [TCP]. In the absence of organic substrate, CCPO-I is slowly reduced to CCPO-II and then the ferric state. The ability of both CCPO-I and -II to carry out the oxidative dehalogenation reaction is consistent with a mechanism involving two consecutive one-electron oxidations. In contrast, reaction of CCPO-I with thioanisole generated the ferric enzyme with no evidence of CCPO-II, consistent with a single two-electron oxidation by insertion of an oxygen atom. The relative stability of CCPO-I and -II has allowed us to differentiate between one- and two-electron substrate oxidations using rapid scan stopped-flow techniques.

Horse Heart Myoglobin Catalyzes the H2O2-Dependent Oxidative Dehalogenation of Chlorophenols to DNA-Binding Radicals and Quinones

The heme-containing respiratory protein, myoglobin (Mb), best known for oxygen storage, can exhibit peroxidase-like activity under conditions of oxidative stress. Under such circumstances, the initially formed ferric state can react with H2O2 (or other peroxides) to generate a long-lived ferryl [Fe(IV)=O] Compound II (Cpd II) heme intermediate that is capable of oxidizing a variety of biomolecules. In this study, the ability of Mb Cpd II to catalyze the oxidation of carcinogenic halophenols is demonstrated. Specifically, 2,4,6-trichlorophenol (TCP) is converted to 2,6-dichloro-1,4-benzoquinone in a H2O2-dependent process. The fact that Mb Cpd II is an active oxidant in halophenol dehalogenation is consistent with a traditional peroxidase order of addition of H2O2 followed by TCP. With 4-chlorophenol, a dimerized product is formed, consistent with a mechanism involving generation of a reactive phenoxy radical intermediate by an electron transfer process. The radical nature of this process may be physiologically relevant since recent studies have revealed that phenoxy radicals and electrophilic quinones, specifically of the type described herein, covalently bind to DNA [Dai, J., Sloat, A. L., Wright, M. W., and Manderville, R. A. (2005) Chem. Res. Toxicol. 18, 771-779]. Thus, the stability of Mb Cpd II and its ability to oxidize TCP may explain why such compounds are carcinogenic. Furthermore, the initial rate of dehalogenation catalyzed by Mb Cpd II is nearly comparable to that of the same reaction carried out by turnover of the ferric state, demonstrating the potential physiological danger of this long-lived, high-valent intermediate.

Characterization and dioxygen reactivity of a new series of coordinatively unsaturated thiolate-ligated manganese(II) complexes

The synthesis, structural, and spectroscopic characterization of four new coordinatively unsaturated mononuclear thiolate-ligated manganese(II) complexes ([Mn(II)(S(Me2)N(4)(6-Me-DPEN))](BF(4)) (1), [Mn(II)(S(Me2)N(4)(6-Me-DPPN))](BPh(4))·MeCN (3), [Mn(II)(S(Me2)N(4)(2-QuinoPN))](PF(6))·MeCN·Et(2)O (4), and [Mn(II)(S(Me2)N(4)(6-H-DPEN)(MeOH)](BPh(4)) (5)) is described, along with their magnetic, redox, and reactivity properties. These complexes are structurally related to recently reported [Mn(II)(S(Me2)N(4)(2-QuinoEN))](PF(6)) (2) (Coggins, M. K.; Kovacs, J. A. J. Am. Chem. Soc.2011, 133, 12470). Dioxygen addition to complexes 1-5 is shown to result in the formation of five new rare examples of Mn(III) dimers containing a single, unsupported oxo bridge: [Mn(III)(S(Me2)N(4)(6-Me-DPEN)](2)-(μ-O)(BF(4))(2)·2MeOH (6), [Mn(III)(S(Me2)N(4)(QuinoEN)](2)-(μ-O)(PF(6))(2)·Et(2)O (7), [Mn(III)(S(Me2)N(4)(6-Me-DPPN)](2)-(μ-O)(BPh(4))(2) (8), [Mn(III)(S(Me2)N(4)(QuinoPN)](2)-(μ-O)(BPh(4))(2) (9), and [Mn(III)(S(Me2)N(4)(6-H-DPEN)](2)-(μ-O)(PF(6))(2)·2MeCN (10). Labeling studies show that the oxo atom is derived from (18)O(2). Ligand modifications, involving either the insertion of a methylene into the backbone or the placement of an ortho substituent on the N-heterocyclic amine, are shown to noticeably modulate the magnetic and reactivity properties. Fits to solid-state magnetic susceptibility data show that the Mn(III) ions of μ-oxo dimers 6-10 are moderately antiferromagnetically coupled, with coupling constants (2J) that fall within the expected range. Metastable intermediates, which ultimately convert to μ-oxo bridged 6 and 7, are observed in low-temperature reactions between 1 and 2 and dioxygen. Complexes 3-5, on the other hand, do not form observable intermediates, thus illustrating the effect that relatively minor ligand modifications have upon the stability of metastable dioxygen-derived species.

Spectroscopic characterization of the ferric states of Amphitrite ornata dehaloperoxidase and Notomastus lobatus chloroperoxidase: His-ligated peroxidases with globin-like proximal and distal properties

Amphitrite ornata dehaloperoxidase (DHP) and Notomastus lobatus chloroperoxidase (NCPO) catalyze the peroxide-dependent dehalogenation of halophenols and halogenation of phenols, respectively. Both enzymes have histidine (His) as their proximal heme iron ligand. Crystallographic examination of DHP revealed that it has a globin fold [M.W. LaCount, E. Zhang, Y.-P. Chen, K. Han, M.M. Whitton, D.E. Lincoln, S.A. Woodin, L. Lebioda, J. Biol. Chem. 275 (2000) 18712-18716] and kinetics studies established that ferric DHP is the active state [R.L. Osborne, L.O. Taylor, K. Han, B. Ely, J.H. Dawson, Biochem. Biophys. Res. Commun. 324 (2004) 1194-1198]. NCPO likely has these same properties. Previous work with His-ligated heme proteins has revealed characteristic spectral distinctions between dioxygen binding globins and peroxide-activating peroxidases. Since DHP, and likely NCPO, is a peroxide-activating globin, we have sought to determine in the present investigation whether the ferric resting states of these two novel heme-containing enzymes are myoglobin-like or peroxidase-like. To do so, we have examined their exogenous ligand-free ferric states as well as their azide, imidazole and NO bound ferric adducts (and ferrous-NO complexes) with UV-Visible absorption and magnetic circular dichroism spectroscopy. We have also compared each derivative to the analogous states of horse heart myoglobin (Mb) and horseradish peroxidase (HRP). The spectra observed for parallel forms of DHP and NCPO are virtually identical to each other as well as to the spectra of the same Mb states, while being less similar to the spectra of corresponding HRP derivatives. From these data, we conclude that exogenous ligand-free ferric DHP and NCPO are six-coordinate with water and neutral His as ligands. This coordination structure is distinctly different from the ferric resting state of His-ligated peroxidases and indicates that DHP and NCPO do not activate bound peroxide through a mechanism dependent on a push effect imparted by a partially ionized proximal His as proposed for typical heme peroxidases.

Water-soluble Fe(II)-H2O complex with a weak O-H bond transfers a hydrogen atom via an observable monomeric Fe(III)-OH

Understanding the metal ion properties that favor O-H bond formation versus cleavage should facilitate the development of catalysts tailored to promote a specific reaction, e.g., C-H activation or H2O oxidation. The first step in H2O oxidation involves the endothermic cleavage of a strong O-H bond (BDFE = 122.7 kcal/mol), promoted by binding the H2O to a metal ion, and by coupling electron transfer to proton transfer (PCET). This study focuses on details regarding how a metal ion's electronic structure and ligand environment can tune the energetics of M(HO-H) bond cleavage. The synthesis and characterization of an Fe(II)-H2O complex, 1, that undergoes PCET in H2O to afford a rare example of a monomeric Fe(III)-OH, 7, is described. High-spin 7 is also reproducibly generated via the addition of H2O to {[Fe(III)(O(Me2)N4(tren))]2-(μ-O)}(2+) (8). The O-H bond BDFE of Fe(II)-H2O (1) (68.6 kcal/mol) is calculated using linear fits to its Pourbaix diagram and shown to be 54.1 kcal/mol less than that of H2O and 10.9 kcal/mol less than that of [Fe(II)(H2O)6](2+). The O-H bond of 1 is noticeably weaker than the majority of reported M(n+)(HxO-H) (M = Mn, Fe; n+ = 2+, 3+; x = 0, 1) complexes. Consistent with their relative BDFEs, Fe(II)-H2O (1) is found to donate a H atom to TEMPO(•), whereas the majority of previously reported M(n+)-O(H) complexes, including [Mn(III)(S(Me2)N4(tren))(OH)](+) (2), have been shown to abstract H atoms from TEMPOH. Factors responsible for the weaker O-H bond of 1, such as differences in the electron-donating properties of the ligand, metal ion Lewis acidity, and electronic structure, are discussed.

Isolation and characterization of a dihydroxo-bridged iron(III,III)(μ-OH)2 diamond core derived from dioxygen

Dioxygen addition to coordinatively unsaturated [Fe(II)(O(Me2)N4(6-Me-DPEN))](PF6) (1) is shown to afford a complex containing a dihydroxo-bridged Fe(III)2(μ-OH)2 diamond core, [Fe(III)(O(Me2)N4(6-Me-DPEN))]2(μ-OH)2(PF6)2·(CH3CH2CN)2 (2). The diamond core of 2 resembles the oxidized methane monooxygenase (MMOox) resting state, as well as the active site product formed following H-atom abstraction from Tyr-OH by ribonucleotide reductase (RNR). The Fe-OH bond lengths of 2 are comparable with those of the MMOHox suggesting that MMOHox contains a Fe(III)2(μ-OH)2 as opposed to Fe(III)2(μ-OH)(μ-OH2) diamond core as had been suggested. Isotopic labeling experiments with (18)O2 and CD3CN indicate that the oxygen and proton of the μ-OH bridges of 2 are derived from dioxygen and acetonitrile. Deuterium incorporation (from CD3CN) suggests that an unobserved intermediate capable of abstracting a H-atom from CH3CN forms en route to 2. Given the high C-H bond dissociation energy (BDE = 97 kcal/mol) of acetonitrile, this indicates that this intermediate is a potent oxidant, possibly a high-valent iron oxo. Consistent with this, iodosylbenzene (PhIO) also reacts with 1 in CD3CN to afford the deuterated Fe(III)2(μ-OD)2 derivative of 2. Intermediates are not spectroscopically observed in either reaction (O2 and PhIO) even at low-temperatures (-80 °C), indicating that this intermediate has a very short lifetime, likely due to its highly reactive nature. Hydroxo-bridged 2 was found to stoichiometrically abstract hydrogen atoms from 9,10-dihydroanthracene (C-H BDE = 76 kcal/mol) at ambient temperatures.

Influence of Thiolate versus Alkoxide Ligands on the Stability of Crystallographically Characterized Mn(III)-Alkylperoxo Complexes

The work described herein demonstrates the exquisite control that the inner coordination sphere of metalloenzymes and transition-metal complexes can have on reactivity. We report one of few crystallographically characterized Mn-peroxo complexes and show that the tight correlations between metrical and spectroscopic parameters, established previously by our group for thiolate-ligated RS-Mn(III)-OOR complexes, can be extended to include an alkoxide-ligated RO-Mn(III)-OOR complex. We show that the alkoxide-ligated RO-Mn(III)-OOR complex is an order of magnitude more stable (t1/2298 K = 6730 s, kobs298 K = 1.03 × 10-4 s-1) than its thiolate-ligated RS-Mn(III)-OOR derivative (t1/2293 K = 249 s, k1293 K = 2.78 × 10-3 s-1). Electronic structure calculations provide insight regarding these differences in stability. The highest occupied orbital of the thiolate-ligated derivative possesses significant sulfur character and π-backdonation from the thiolate competes with π-backdonation from the peroxo π*(O-O). DFT-calculated Mulliken charges show that the Mn ion Lewis acidity of alkoxide-ligated RO-Mn(III)-OOR (+0.451) is greater than that of thiolate-ligated RS-Mn(III)-OOR (+0.306), thereby facilitating π-backdonation from the antibonding peroxo π*(O-O) orbital and increasing its stability. This helps to explain why the photosynthetic oxygen-evolving Mn complex, which catalyzes O-O bond formation as opposed to cleavage, incorporates O- and/or N-ligands as opposed to cysS-ligands.