Direct Amination of Benzene with Ammonia by Flow Plasma Chemistry

Amine derivatives, including aniline and allylic amines, can be formed in a single-step process from benzene and an ammonia plasma in a microreactor. Different process parameters such as temperature, residence time, and plasma power were evaluated to improve the reaction yield and its selectivity toward aminated products and avoid hydrogenated or oligomerized products. In parallel, simulation studies of the process have been carried out to propose a global mechanism and gain a better understanding of the influence of the different process parameters. The exploration of diverse related alkenes showed that the double bonds, conjugation, and aromatization influenced the amination mechanism. Benzene was the best reactant for amination based on the lifetime of radical intermediates. Under optimized conditions, benzene was aminated in the absence of catalyst with a yield of 3.8 % and a selectivity of 49 % in various amino compounds.

Synthesis of trifluoromethyl N,N-aminals from nitrogen containing heterocycles by using a plasma flow microreactor

Trifluoromethyl N,N-aminals are important precursors allowing access to fluorinated building blocks. In this work, the direct synthesis of trifluoromethyl N,N-aminals from nitrogen containing heterocycles is reported using argon plasma in a continuous flow microreactor without any additives or metal catalysts. Their transformation to N-trifluoroethyl amines is also reported.

Plasma flow chemistry for direct N-acylation of amines by esters

The direct N-acylation of amines by esters in a microreactor is described using argon plasma, thereby producing amides in good to excellent yields.

Plasma activated 1-hexene oligomerization in a gas-liquid microreactor

The oligomerization of 1-hexene under argon plasma was investigated in a gas-liquid, continuous flow microreactor. The evolution of the yields of the reaction products as a function of the residence...

Customizable Sophisticated Three-Dimensional Shape Changes of Large-Size Liquid Crystal Elastomer Actuators

Stimuli-responsive liquid crystal elastomers (LCEs), which exhibit sophisticated and versatile shape variations and functions upon stimulations, have constantly interested material science researchers. To date, many challenges still exist in scaling up orientated LCEs with sophisticated physical shapes and multi-functions. Herein, LCEs with various customizable conventional and exotic three-dimensional (3D) shapes and with sizes larger than those previously reported have been prepared by combining magnetic field alignment and soft lithography technology. These LCEs have film, cylinder, ellipsoid, hemispheroid, tube, pyramid, triangle and rectangle frame, grid pattern, cubic frame, and spring shapes. Meanwhile, diversified deformation behaviors such as contraction, expansion, bending, and twisting have been achieved by effectively controlling the alignment directions. Finally, the LCE actuator with hemispheroid shape has been explored for its possible applications in dynamic Braille displays or lenses with adjustable focal length. The simple strategy reported here provides a convenient way to customize multimorphological large-size 3D LCE actuators and their stimuli-responsive deformations. These systems will considerably enlarge the potential applications of LCEs and benefit the development of LCE soft robots and the future special bionic systems.

Plasma-Induced Polymerizations: A New Synthetic Entry in Liquid Crystal Elastomer Actuators

The research on soft actuators including liquid crystal elastomers (LCEs) becomes more and more appealing at a time when the expansion of artificial systems is blooming. Among the various LCE actuators, the bending deformation is often in the origin of many actuation modes. Here, a new strategy with plasma technology is developed to prepare single-layer main-chain LCEs with thermally actuated bending and contraction deformations. Two distinct reactions, plasma polymerization and plasma-induced photopolymerization, are used to polymerize in one step the nematic monomer mixture aligned by magnetic field. The plasma polymerization forms cross-linked but disoriented structures at the surface of the LCE film, while the plasma-induced photopolymerization produces aligned LCE structure in the bulk. The actuation behaviors (bending and/or contraction) of LCE films can be adjusted by plasma power, reaction time, and sample thickness. Soft robots like crawling walker and flower mimic are built by LCE films with bending actuation.

Electrocatalytic behaviour of CeZrOx-supported Ni catalysts in plasma assisted CO2 methanation

Plasma and thermo-catalytic methanation were assayed in the presence of a CeZrO_x-supported Ni catalyst. High CO₂ conversions and high methane yields were obtained under DBD plasma, and are maintained with time-on-stream over 100 h operating time.

Cross coupling of alkylsilicates with acyl chlorides via photoredox/nickel dual catalysis: a new synthesis method for ketones

Photoredox/nickel dual catalysis using silicates and acyl chlorides allows a new method of formation of ketones. Flow chemistry can be applied.

Microfluidic chips for plasma flow chemistry: application to controlled oxidative processes

A novel biphasic gas/liquid plasma microreactor performed controlled oxidation of cyclohexane into “KA oil” with more than 70% selectivity and more than 10% conversion.

Controlled Distribution and Clustering of Silver in Ag-DLC Nanocomposite Coatings Using a Hybrid Plasma Approach

Incorporation of selected metallic elements into diamond-like carbon (DLC) has emerged as an innovative approach to add unique functional properties to DLC coatings, thus opening up a range of new potential applications in fields as diverse as sensors, tribology, and biomaterials. However, deposition by plasma techniques of metal-containing DLC coatings with well-defined structural properties and metal distribution is currently hindered by the limited understanding of their growth mechanisms. We report here a silver-incorporated diamond-like carbon coating (Ag-DLC) prepared in a hybrid plasma reactor which allowed independent control of the metal content and the carbon film structure and morphology. Morphological and chemical analyses of Ag-DLC films were performed by atomic force microscopy, scanning electron microscopy, and X-ray photoelectron spectroscopy. The vertical distribution of silver from the surface toward the coating bulk was found to be highly inhomogeneous due to top surface segregation and clustering of silver nanoparticles. Two plasma parameters, the sputtered Ag flux and ion energy, were shown to influence the spatial distribution of silver particles. On the basis of these findings, a mechanism for Ag-DLC growth by plasma was proposed.

Cyclic olefin copolymer plasma millireactors

The novelty of this paper lies in the development of a multistep process for the manufacturing of plasma millireactors operating at atmospheric pressure. The fabrication process relies on the integration of metallic electrodes over a cyclic olefin copolymer chip by a combination of photopatterning and sputtering. The developed plasma millireactors were successfully tested by creating air discharges in the gas volume of the millichannel. A sputtered silica layer was deposited on the channel walls to provide a barrier between the plasma and the polymer in order to prevent the alteration of polymer surfaces during the plasma treatment. Interest in this process of employing plasma millireactor as a high reactive environment is demonstrated here by the degradation of a volatile organic compound (acetaldehyde) in ambient air. In this miniaturized device, we obtained a high acetaldehyde conversion (98%) for a specific input energy lower than 200 J L(-1).

Implanted, inductively-coupled, radiofrequency coils fabricated on flexible polymeric material: application to in vivo rat brain MRI at 7 T

Combined with high-field MRI scanners, small implanted coils allow for high resolution imaging with locally improved SNR, as compared to external coils. Small flexible implantable coils dedicated to in vivo MRI of the rat brain at 7 T were developed. Based on the Multi-turn Transmission Line Resonator design, they were fabricated with a Teflon substrate using copper micromolding process and a specific metal-polymer adhesion treatment. The implanted coils were made biocompatible by PolyDimethylSiloxane (PDMS) encapsulation. The use of low loss tangent material achieves low dielectric losses within the substrate and the use of the PDMS layer reduces the parasitic coupling with the surrounding media. An implanted coil was implemented in a 7 T MRI system using inductive coupling and a dedicated external pick-up coil for signal transmission. In vivo images of the rat brain acquired with in plane resolution of (150 μm)(2) thanks to the implanted coil revealed high SNR near the coil, allowing for the visualization of fine cerebral structures.

Influence of the 316 L stainless steel interface on the stability and barrier properties of plasma fluorocarbon films

Coatings are known to be one of the more suited strategies to tailor the interface between medical devices and the surrounding cells and tissues once implanted. The development of coatings and the optimization of their adhesion and stability are of major importance. In this work, the influence of plasma etching of the substrate on a plasma fluorocarbon ultrathin coating has been investigated with the aim of improving the stability and the corrosion properties of coated medical devices. The 316 L stainless steel interface was subjected to two different etching sequences prior to the plasma deposition. These plasma etchings, with H(2) and C(2)F(6) as gas precursors, modified the chemical composition and the thickness of the oxide layer and influenced the subsequent polymerization. The coating properties were evaluated using flat substrates submitted to deformation, aging into aqueous medium and corrosion tests. X-ray photoelectron spectroscopy (XPS), time of flight-secondary ion mass spectrometry (ToF-SIMS), ellipsometry, and atomic force microscopy (AFM) were performed to determine the effects of the deformation and the aging on the chemistry and morphology of the coated samples. Analyses showed that plasma etchings were essential to promote reproducible polymerization and film growth. However, the oxide layer thinning due to the etching lowered the corrosion resistance of the substrate and affected the stability of the interface. Still, the deformed samples did not exhibited adhesion and cohesion failure before and after the aging.

Plasma surface modification of organic materials: comparison between polyethylene films and octadecyltrichlorosilane self-assembled monolayers

Low-pressure low-frequency NH3 plasmas have been used for the surface modification of bulk polyethylene films and of octadecyltrichlorosilane (OTS) self-assembled monolayers deposited on oxidized silicon wafers. The incorporation of nitrogen-containing groups by the plasma treatment has been followed by contact angle measurements and by X-ray photoelectron spectroscopy. The surface degradation of the OTS monolayers due to plasma etching has been measured separately by optical ellipsometry with subnanometric accuracy. Our data show clear evidence for the existence of an optimum treatment time, yielding a high density of NH2 functional groups without significant variation of the structural features of the organic material. Self-assembled monolayers appear as excellent model systems to characterize the effects of plasma discharges on polyolefins. In particular, they allow testing the influence of molecular orientation, packing density, and crystallinity on the final results.