Reforming of biomass-derived producer gas using toluene as model tar: Deactivation and regeneration studies in Ni and K-Ni catalysts

Within the syngas production from biomass gasification, tar removal constitutes a chief issue to overcome for advanced catalytic systems. This work investigates the performance of Ni and Ni-K catalysts for reforming of derived-biomass producer gas using toluene as model tar. At 750 °C and 60Lg-1h-1, the stability test (70 h) revealed stable performances (CO2, CH4 and C7H8 conversions of 60, 95 and 100%, correspondingly) uniquely for the Ni-K catalyst. Although the efficient protection towards coking let by K was demonstrated, TPO studies over the post-reacted systems still evidenced the presence of carbon deposits for both samples. Conducting three successive reaction/regeneration cycles with different gasifying agents (air, steam and CO2) at 800 °C for 1h, the capability towards regeneration of both catalytic systems was assessed and the spent catalysts were characterized by XRD, SEM and TEM. While none of the regeneration treatments recovered the performance of the unpromoted catalyst, the Ni-K catalysts demonstrated the capability of being fully regenerated by air and CO2 and exhibited analogous catalytic performances after a series of reaction/regeneration cycles. Hence, it is proved that the addition of K into Ni catalysts not only enhances the resistance against deactivation but enables rather facile regenerative procedures under certain atmospheres (air and CO2).

Biochar production from cellulose under reductant atmosphere: influence of the total pyrolysis time

Today's rising energy costs, coupled with increasing energy demand, make it necessary to search for more efficient energy processes. In recent years, there have been increasing efforts to develop efficient catalysts based on waste-derived char, by a single step where the carbon precursor and the metallic active phase one undergo a single common thermal process under a reductant atmosphere at high temperature. The use of a reductant atmosphere drives the formation of carbonaceous materials with different characteristics than those obtained under the standard nitrogen-inert one. Our work evaluates the influence of the residence time and the heating rate on the physicochemical properties of the biochar obtained. Relatively long residence times and slow heating rates, improve the yield to the resulting biochar, without increasing production cost, making the subsequent char-based metallic catalyst synthesis more efficient. The heating rate was shown to be key in improving the properties of the char in a smoother and more controlled way, unlocking a new working pathway for the efficient design and production of char-based catalysts in a one-pot synthesis.

Stewardship of global collective behavior

Collective behavior provides a framework for understanding how the actions and properties of groups emerge from the way individuals generate and share information. In humans, information flows were initially shaped by natural selection yet are increasingly structured by emerging communication technologies. Our larger, more complex social networks now transfer high-fidelity information over vast distances at low cost. The digital age and the rise of social media have accelerated changes to our social systems, with poorly understood functional consequences. This gap in our knowledge represents a principal challenge to scientific progress, democracy, and actions to address global crises. We argue that the study of collective behavior must rise to a "crisis discipline" just as medicine, conservation, and climate science have, with a focus on providing actionable insight to policymakers and regulators for the stewardship of social systems.

Monitoring the Reaction Mechanism in Model Biogas Reforming by In Situ Transient and Steady-State DRIFTS Measurements

In this work, the reforming of model biogas was investigated on a Rh/MgAl₂ O₄ catalyst. In situ transient and steady-state diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) measurements were used to gain insight into the reaction mechanism involved in the activation of CH₄ and CO₂ . It was found that the reaction proceeds through of an initial pathway in which methane and CO₂ are both dissociated on Rh metallic sites and additionally a bifunctional mechanism in which methane is activated on Rh sites and CO₂ is activated on the basic sites of the support surface via a formate intermediate by H-assisted CO₂ decomposition. Moreover, this plausible mechanism is able to explain why the observed apparent activation energy of CO₂ is much lower than that of CH₄ . Our results suggest that CO₂ dissociation facilitates CH₄ activation, because the oxygen-adsorbed species formed in the decomposition of CO₂ are capable of reacting with the CH_x species derived from methane decomposition.

Low-temperature CO oxidation on multicomponent gold based catalysts

In this work the development of gold catalysts, essentially based on γ-alumina with small superficial fraction of Ce-Fe mixed oxides as support for the low temperature CO oxidation is proposed. Characterization results obtained by means of TEM, OSC, XPS, UV-Vis spectroscopy and H2-TPR are employed to correlate the activity data with the catalysts composition. The bare γ-alumina supported gold catalyst demonstrates the poorest activity within the series. The addition of CeO2 or FeOX improves the catalytic performance, especially observed for the CeO2-FeOx mixed oxide doped samples. This enhanced CO oxidation activity was related to the Ce-Fe interaction producing materials with promoted redox properties and therefore oxidation activity.

Fibrous MnO2 nanoparticles with (2 x 2) tunnel structures. Catalytic activity in the total oxidation of volatile organic compounds

Manganese oxides having 2 x 2 tunnel structures (cryptomelanes) have been synthesized by a milling method in order to test their efficiency as catalysts for the abatement of volatile organic compounds, using toluene as probe molecule. These materials present excellent textural properties, arising from the nanofiber morphology and were active for toluene total oxidation. DRIFTS of the adsorbed phase allow proposing the role of lattice oxygen in the catalytic reaction.

Apatite and Portland/apatite composite cements obtained using a hydrothermal method for retaining heavy metals

Apatite and Portland/apatite composite cements containing steelwork dusts have been prepared using a low temperature hydrothermal method (200 degrees C, 48h). The produced solids were characterized by means of XRD, IR, and SEM-EDX, and the remaining liquid was analyzed by ICP. The results clearly show the capability of these cements to inertise the heavy metals contained in steelwork dusts, that is Fe, Pb, Mo, Cr, Mn, Ni, and Zn. In the case of apatitic cements, Fe, Mg, Cr, Mn, and Pb coming from steel dust replaced Ca in the divalent cation position of the apatite structure, while Si and Mo replaced P in tetrahedral position. The average crystal size of the apatite-containing dust is smaller than in pure apatite synthesized using the same procedure, which is related to the magnesium content of the dust, since magnesium seems to inhibit the crystal growth. XRD diagrams of composite cements show only peaks corresponding to phases observed in the single cements, and in that no new phases are found. However, EDX analysis reveals the introduction of cations coming from Portland cement into the apatite structure. From the results of water analysis it could be concluded that the capability of retention is higher in composite matrices than in the pure apatite one. In conclusion, the obtained data allow stating that the proposed method, the hydrothermal synthesis of steelwork dust containing cement, is a reliable one for immobilization of toxic residues containing heavy leachable cations.

Fourier transform infrared spectroscopic study of surface acidity by pyridine adsorption on Mo/ZrO2-SiO2(Al2O3) catalysts

Acidity of the oxidic molybdenum catalysts supported on mixed ZrO2-SiO2 and ZrO2-Al2O3 carriers was investigated by Fourier transform infrared spectroscopy of pyridine adsorption. Deposition of molybdenum on ZrO2-SiO2 and ZrO2-Al2O3 supports leads to formation of surface Brønsted acid sites. The number of the Brønsted and Lewis acid sites in supported-molybdenum catalysts depends on both the ZrO2 content and the type of the support. With increasing ZrO2 content, the Lewis acid sites increase for both series of catalysts. The Brønsted acid sites are higher for Mo/ZrO2-SiO2 samples compared to those for Mo/ZrO2-Al2O3 and also increase with zirconia.

The structural role of the carotenoid in the bacterial light-harvesting protein 2 (LH2) of Rhodonbacter capsulatus. A Fourier transform Raman spectroscopy and circular dichroism study

In previous work (Zurdo J, Fernández-Cabrera C and Ramírez JM (1993) Biochem J 290: 531-537), it had been shown that selective extraction of the carotenoid from the light-harvesting protein 2 (LH2) of Rhodobacter capsulatus induced the dissociation of 800-nm absorbing bacteriochlorophyll (Bchl), a 10-nm red shift of 854-nm Bchl, and a decrease of the stability of the protein in detergent solution. In the present study, the Fourier transform Raman and near-infrared circular dichroism spectra of native and carotenoid-depleted LH2 membrane preparations were compared. It was found that while the coupled carbonyls of 854-nm Bchl remained specifically H-bonded to the peptides after carotenoid extraction, the optical activity of the near-infrared electronic transition was significantly altered. Given the excitonic origin of such optical activity, our data suggest that carotenoid extraction elicits a rearrengement of the chromophore cluster and of the associated polypeptide subunits. This implies a significant role of the carotenoid in maintaining the native quaternary structure of the protein, which would be consistent with the observed dissociation of 800-nm Bchl and the loss of solubilized LH2 stability that result from carotenoid removal. There is no evidence for a similar role of the carotenoid in the LH1 protein.