Critical-Point-Dried, Porous, and Safer Aramid Nanofiber Separator for High-Performance Durable Lithium-Ion Batteries

Ionically conducting, porous separator membranes with submicrometer size pores play an important role in governing the outcome of lithium-ion batteries (LIBs) in terms of life, safety, and effective transport of ions. Though the polyolefin membranes have dominated the commercial segment for the past few decades, to develop next-generation batteries with high-energy density, high capacity, and enhanced safety, there is a need to develop advanced separators with superior thermal stability, electrolyte interfacial capabilities, high melting temperature, and mechanical stability at elevated temperatures. Here, aramid nanofiber separators with enhanced mechanical and thermal stability dried at the critical point are processed and tested for mechanical strength, wettability, electrochemical performance, and thermal safety aspects in LIBs. These separators outperform Celgard polypropylene in all aspects such as delivering a high Young's modulus of 6.9 ± 1.1 GPa, and ultimate tensile strength of 170 ± 25 MPa. At 40 and 25 °C, stable 200 and 300 cycles with 10% and 11% capacity fade were obtained at 1 C rate, respectively. Multimode calorimetry, specially designed to study thermal safety aspects of LIB coin cells, demonstrates low exothermicity for critical-point-dried aramid nanofiber separators, and post-diagnosis illustrates preservation of structural integrity up to 300 °C, depicting possibilities of developing advanced safer, high-performance LIBs.

Lithium-ion Battery Thermal Safety by Early Internal Detection, Prediction and Prevention

Temperature rise in Lithium-ion batteries (LIBs) due to solid electrolyte interfaces breakdown, uncontrollable exothermic reactions in electrodes and Joule heating can result in the catastrophic failures such as thermal runaway, which is calling for reliable real-time electrode temperature monitoring. Here, we present a customized LIB setup developed for early detection of electrode temperature rise during simulated thermal runaway tests incorporating a modern additive manufacturing-supported resistance temperature detector (RTD). An advanced RTD is embedded in a 3D printed polymeric substrate and placed behind the electrode current collector of CR2032 coin cells that can sustain harsh electrochemical operational environments (acidic electrolyte without Redox, short-circuiting, leakage etc.) without participating in electrochemical reactions. The internal RTD measured an average 5.8 °C higher temperature inside the cells than the external RTD with almost 10 times faster detection ability, prohibiting thermal runaway events without interfering in the LIBs’ operation. A temperature prediction model is developed to forecast battery surface temperature rise stemming from measured internal and external RTD temperature signatures.

Upcycling of Spent Lithium Cobalt Oxide Cathodes from Discarded Lithium-Ion Batteries as Solid Lubricant Additive

This work provides an alternative solution to the challenge of battery recycling via the upcycling of spent lithium cobalt oxide (LCO) as a new promising solid lubricant additive. An advanced solid lubricant mixture of graphene, Aremco binder, and recycled LCO was formulated into a spray with the use of excess volatile organic solvent. Numerous flat steel disks were spray-coated with the new lubricant formulation and naturally dried followed by curing at 180 °C. When tested on a ball-on-disk up to 230 m in distance, the composite new solid lubricant reduced the coefficient of friction (COF) by 85% between two steel surfaces compared to unlubricated surfaces under a constant 1 GPa Hertzian pressure in an ambient environment. The tribofilm composition, particle size, and type of contact are identified as important parameters in the improvement of the COF. Scanning electron microscopy was used to study its morphology, and energy dispersive X-ray spectroscopy was used to analyze the composition of pristine and tested tribofilms. Upcycled spent low value LCO powder was used as a lubricant additive in tribology for the first time with exceptional lubricious properties.

Protective effect of vitamin E on the response of the rabbit bladder to partial outlet obstruction

PURPOSE

There is increasing evidence that ischemia/reperfusion is a major etiological factor in the progression of bladder dysfunction after partial outlet obstruction. If this evidence is correct, treatment with an antioxidant should be beneficial in rabbits subjected to partial outlet obstruction. We designed the current study to determine if diets high in alpha-tocopherol protected the rabbit bladder against dysfunction induced by partial outlet obstruction.

MATERIALS AND METHODS

A total of 32 rabbits were separated into 4 groups of 8. Groups 1 and 2 were placed on a diet enriched with 1,000 IU/kg. alpha-tocopherol, and groups 3 and 4 were fed a regular diet containing 44 IU/kg. alpha-tocopherol. After 4 weeks partial outlet obstruction was created in groups 1 and 3, while groups 2 and 4 underwent sham operation. After 4 weeks of obstruction the rabbits were anesthetized and the bladders were rapidly excised. Four longitudinal strips obtained from the bladder body were used for contractility studies. The balance of the bladder body was separated between muscle and mucosa. Each section was frozen and stored at -70C for analysis of malondialdehyde as a measure of peroxidation and for alpha-tocopherol concentrations.

RESULTS

Feeding rabbits a diet high in alpha-tocopherol resulted in significant protection against the development of contractile dysfunction after partial outlet obstruction. The protective effect of alpha-tocopherol was related to significantly decreased malondialdehyde and significantly increased tissue concentrations of alpha-tocopherol.

CONCLUSIONS

These data indicate that a major etiology of bladder dysfunction secondary to partial outlet obstruction is related to free radical generation and resultant membrane lipid peroxidation.