Algae: A promising and sustainable protein-rich food ingredient for bakery and dairy products

The consumer demand for protein rich foods urges the exploration for novel products of natural origin. Algae can be considered as a gold mine of different bioactive compounds, among which protein is distributed in significant amounts i.e., around 30% and can even reach to 55-60% in some cyanobacteria. Bakery and dairy products are extensively consumed worldwide due to product diversification and innovation. However, incorporation of algae biomass can lead to the development of green colour and fishy flavour that usually is not accepted in such products. Therefore, isolation and application of algae-derived proteins opens a new door for food industry. The present review provides a comprehensive understanding of incorporation of algae as a protein-rich ingredient in bakery and dairy products. The paper provides a deep insight for all the possible recent trends related to production and extraction of algae proteins accompanied by their incorporation in bakery and dairy foods.

Exogenous GABA supplementation to facilitate Cr (III) tolerance and lipid biosynthesis in Chlorella sorokiniana

Microalgae possess the prospective to be efficiently involved in bioremediation and biodiesel generation. However, conditions of stress often restrict their growth and diminish different metabolic processes. The current study evaluates the potential of GABA to improve the growth of the microalga Chlorella sorokiniana under Cr (III) stress through the exogenous administration of GABA. The research also investigates the concurrent impact of GABA and Cr (III) stress on various metabolic and biochemical pathways of the microalgae. In addition to the control, cultures treated with Cr (III), GABA, and both Cr (III) and GABA treated were assessed for accurately analysing the influence of GABA. The outcomes illustrated that GABA significantly promoted growth of the microalgae, resulting in higher biomass productivity (19.14 mg/L/day), lipid productivity (3.445 mg/L/day) and lipid content (18%) when compared with the cultures under Cr (III) treatment only. GABA also enhanced Chl a content (5.992 μg/ml) and percentage of protein (23.75%). FAMEs analysis by GC-MS and total lipid profile revealed that GABA treatment can boost the production of SFA and lower the level of PUFA, a distribution ideal for improving biodiesel quality. ICP-MS analysis revealed that GABA supplementation could extend Cr (III) mitigation level up to 97.7%, suggesting a potential strategy for bioremediation. This novel study demonstrates the merits of incorporating GABA in C. sorokiniana cultures under Cr (III) stress, in terms of its potential in bioremediation and biodiesel production without disrupting the pathways of photosynthesis and protein production.

Silver-Assisted Hydrogen Evolution from Aluminum Oxidation in Saline Media

A swarf of aluminum alloy with high corrosion resistance and ductility was successfully converted into fine hydro reactive powders via ball milling with silver powder and either lithium chloride or gallium. The latter substances significantly intensified particle size reduction, while silver formed 'cathodic' sites (Ag, Ag2Al), promoting Al corrosion in aqueous saline solutions with hydrogen generation. The diffraction patterns, microphotographs, and elemental analysis results demonstrated partial aluminum oxidation in the samples and their contamination with tungsten carbide from milling balls. Those factors were responsible for obtaining lower hydrogen yields than expected. For AlCl3 solution at 60 °C, Al-LiCl-Ag, Al-LiCl, Al-Ga-Ag, and Al-Ga composites delivered (84.6 ± 0.2), (86.8 ± 1.4), (80.2 ± 0.5), and (76.7 ± 0.7)% of the expected hydrogen, respectively. Modification with Ag promoted Al oxidation, thus providing higher hydrogen evolution rates. The samples with Ag were tested in a CaCl2 solution as well, for which the reaction proceeded much more slowly. At a higher temperature (80 °C) after 3 h of experiment, the corresponding hydrogen yields for Al-LiCl-Ag and Al-Ga-Ag powders were (46.7 ± 2.1) and (31.8 ± 1.9)%. The tested Ag-modified composite powders were considered promising for hydrogen generation and had the potential for further improvement to deliver higher hydrogen yields.

Metal Scrap to Hydrogen: Manufacture of Hydroreactive Solid Shapes via Combination of Ball Milling, Cold Pressing, and Spark Plasma Sintering

Two sorts of tablets were manufactured from ball-milled powder (aluminum scrap and copper) by cold pressing and spark plasma sintering. Their microstructure, phase, and elemental compositions were investigated via scanning electron microscopy, X-ray diffraction analysis, and energy-dispersive X-ray spectroscopy. New phases, Al2Cu and MgCuAl2, were detected in the samples. Their microstructure was formed by welded scrap particles, the intermetallides, and Cu-rich regions located majorly along 'interparticle boundaries' and, to a lesser extent, within small, micro- and nanosized 'intraparticle spots'. The tablets were sealed with adhesive, so only the top surface was exposed to the environment, and tested in a chlorine aqueous solution for hydrogen generation performance. For both sample sorts, hydrogen yields of nearly 100% were achieved. The sintered tablets reacted faster than the cold-pressed ones: at 60, 70, and 80 °C, their entire 'conversion into hydrogen' took ~80, 40, and 30 min. vs. ~220, 100, and 70 min. The experimental kinetic curves were fitted with a contracting geometry equation, and those for the sintered samples were approximated with higher precision. The key effect of the additive was to enhance hydrogen evolution through the galvanic corrosion of Al in the regions adjacent to the intermetallic inclusions and Cu-rich spots.

Effects of Light Intensity on the Growth and Biochemical Composition in Various Microalgae Grown at High CO2 Concentrations

In modern energy, various technologies for absorbing carbon dioxide from the atmosphere are being considered, including photosynthetic microalgae. An important task is to obtain maximum productivity at high concentrations of CO2 in gas-air mixtures. In this regard, the aim of the investigation is to study the effect of light intensity on the biomass growth and biochemical composition of five different microalgae strains: Arthrospira platensis, Chlorella ellipsoidea, Chlorella vulgaris, Gloeotila pulchra, and Elliptochloris subsphaerica. To assess the viability of microalgae cells, the method of cytochemical staining with methylene blue, which enables identifying dead cells during microscopy, was used. The microalgae were cultivated at 6% CO2 and five different intensities: 80, 120, 160, 200, and 245 μmol quanta·m-2·s-1. The maximum growth rate among all strains was obtained for C. vulgaris (0.78 g·L-1·d-1) at an illumination intensity of 245 µmol quanta·m-2·s-1. For E. subsphaerica and A. platensis, similar results (approximately 0.59 and 0.25 g·L-1·d-1 for each strain) were obtained at an illumination intensity of 160 and 245 µmol quanta·m-2·s-1. A decrease in protein content with an increase in illumination was noted for C. vulgaris (from 61.0 to 46.6%) and A. platensis (from 43.8 to 33.6%), and a slight increase in lipid content was shown by A. platensis (from 17.8 to 21.4%). The possibility of increasing microalgae biomass productivity by increasing illumination has been demonstrated. This result can also be considered as showing potential for enhanced lipid microalgae production for biodiesel applications.

Enhancing the bio-prospective of microalgae by different light systems and photoperiods

Microalgae are a source of highly valuable bioactive metabolites and a high-potential feedstock for environmentally friendly and sustainable biofuel production. Recent research has shown that microalgae benefit the environment using less water than conventional crops while increasing oxygen production and lowering CO2 emissions. Microalgae are an excellent source of value-added compounds, such as proteins, pigments, lipids, and polysaccharides, as well as a high-potential feedstock for environmentally friendly and sustainable biofuel production. Various factors, such as nutrient concentration, temperature, light, pH, and cultivation method, effect the biomass cultivation and accumulation of high-value-added compounds in microalgae. Among the aforementioned factors, light is a key and essential factor for microalgae growth. Since photoautotrophic microalgae rely on light to absorb energy and transform it into chemical energy, light has a significant impact on algal growth. During micro-algal culture, spectral quality may be tailored to improve biomass composition for use in downstream bio-refineries and boost production. The light regime, which includes changes in intensity and photoperiod, has an impact on the growth and metabolic composition of microalgae. In this review, we investigate the effects of red, blue, and UV light wavelengths, different photoperiod, and different lighting systems on micro-algal growth and their valuable compounds. It also focuses on different micro-algal growth, photosynthesis systems, cultivation methods, and current market shares.

Bio-oil and biochar production from Ageratum conyzoides using triple-stage hydrothermal liquefaction and utilization of biochar in removal of multiple heavy metals from water

Production of low-cost biomass and its utilization for producing cost effective and eco-friendly bioenergy as well as for removing heavy metals from water can be explored as an approach to meet the sustainable development goals. In light of the above-mentioned study, hydrothermal liquefaction (HTL) of Billy goat weed (BGW; Ageratum conyzoides) was carried out to produce bio-oil. In addition, the residual biochar from the HTL process was activated to obtain Act-BC and was further modified to produce MnO2-loaded biochar (Act-BC@MnO2-25%). The HTL of BGW was done at three different temperatures, i.e., 250 °C, 350 °C and 450 °C in a high-pressure batch reactor to maximize the bio-oil yield. Also, two different HTL methods i.e., single-stage HTL and triple-stage HTL of BGW were compared and discussed in detail. The bio-oil obtained via the triple-stage HTL was rich in carbon, hydrogen, and nitrogen. It also showed a higher heating value (HHV) and bio-oil yield (46%) than the single-stage. The residual biochar obtained at 450 °C (Act-BC) and MnO2 modified (Act-BC@MnO2-25%) were then tested to adsorb multiple heavy metal (i.e., Pb(II), Cd(II), Cu(II), and Ni(II)) from water. The kinetics data obtained from the adsorption experiment with Act-BC@MnO2-25% were well fitted to PSO kinetics model. The isotherm data were well aligned with the Langmuir model; the adsorption capacity of Act-BC@MnO2-25% was estimated to be 198.70 ± 11.40 mg g-1, 93.70 ± 6.60 mg g-1, 78.90 ± 7.20 mg g-1 and 30.50 ± 2.10 mg g-1 for Pb(II), Cd(II), Cu(II), and Ni(II), respectively. Furthermore, Act-BC@MnO2-25% remained active for metal ions absorption even after six consecutive uses. The result obtained from this study clearly demonstrates that the triple-stage HTL of BGW is a promising technology to achieve both remediation of metal-contaminated water and production of bioenergy.

Numerical optimization of hydrothermal liquefaction process for the production of bio-oil and bio-char from Citrus maxima peel waste and product characterization

This research study aims to potential utilization of Citrus maxima peel waste and optimize the hydrothermal liquefaction process for the production of bio-oil (BO) and bio-char (BC). The effect of several HTL processing variables on BO yield (%) and BC yield (%), including temperature, retention period, and slurry concentration, has been examined using central composite design (CCD) (a three-level three-factor design). The optimized values of HTL process variables were found to be 240 °C (temperature), 52 min (retention time), and 7% (slurry concentration) and the corresponding responses were 5.794% (BO yield) and 29.450% (BC yield). The values obtained from the RSM-CCD model as the predicted values agreed with the experimental values (5.93% and 30.14%). Further the BO and BC obtained under optimized conditions and CPP were analyzed to identify the variations by 1H-NMR, GC-MS, FT-IR, and CHNO-S.

Development of yeast and microalgae consortium biofilm growth system for biofuel production

Background

The current study aimed to develop a laboratory-scale biofilm photobioreactor system for biofuel production.

Scope & Approach

During the investigation, Jute was discovered to be the best, cheap, hairy, open-pored supporting material for biofilm formation. Microalgae & yeast consortium was used in this study for biofilm formation.

Conclusion

The study identified microalgae and yeast consortium as a promising choice and ideal partners for biofilm formation with the highest biomass yield (47.63 ± 0.93 g/m2), biomass productivity (4.39 ± 0.29 to 7.77 ± 0.05 g/m2/day) and lipid content (36%) over 28 days cultivation period, resulting in a more sustainable and environmentally benign fuel that could become a reality in the near future.

A phyco-nanobionics biohybrid system for increased carotenoid accumulation in C. sorokiniana UUIND6

Recent advancements in "phyco-nanobionics" have sparked considerable interest in the ability of microalgae to synthesize high-value natural bioactive compounds such as carotenoid pigments, which have been highlighted as an emergent and vital bioactive compound from both industrial and scientific perspectives. Such bioactive compounds are often synthesized by either altering the biogenetic processes existing in living microorganisms or using synthetic techniques derived from petroleum-based chemical sources. A bio-hybrid light-driven cell factory system was established herein by using harmful macroalgal bloom extract (HMBE) and efficient light-harvesting silver nanoparticles (AgNPs) to synthesize HMBE-AgNPs and integrating the synthesized HMBE-AgNPs in various concentrations (1, 2.5, 5 and 10 ppm) into the microalgae C. sorokiniana UUIND6 to improve the overall solar-to-chemical conversion efficiency in carotenoid pigment synthesis in microalgae. The current study findings found high biocompatibility of 5 ppm HMBE-AgNP concentration that can serve as a built-in photo-sensitizer and significantly improve ROS levels in microalgae (6.75 ± 0.25 μmol H2O2 g-1), thus elevating total photosynthesis resulting in a two-fold increase in carotenoids (457.5 ± 2.5 μg mL-1) over the native microalgae without compromising biomass yield. NMR spectroscopy was additionally applied to acquire a better understanding of pure carotenoids derived from microalgae, which indicated similar peaks in both spectra when compared to β-carotene. Thus, this well-planned bio-hybrid system offers a potential option for the cost-effective and long-term supply of these natural carotenoid bio-products.

Evaluation of the mechanisms underlying altered fatty acid biosynthesis in heterotrophic microalgal strain Chlorella sorokiniana during biodegradation of phenol and p-nitrophenol

Phenolic compounds have become a severe environmental concern due to water contamination, affecting the sustainability of the ecosystem. The microalgae enzymes have enticed for the efficient involvement in the biodegradation of phenolics compound in metabolic processes. In this investigation, the oleaginous microalgae Chlorella sorokiniana was cultured heterotrophically under the influence of phenol and p-nitrophenol. The enzymatic assays of algal cell extracts were used to decipher the underlying mechanisms for phenol and p-nitrophenol biodegradation. A reduction of 99.58% and 97.21% in phenol and p-nitrophenol values, respectively, was recorded after the 10th day of microalgae cultivation. Also, the biochemical components in phenol, p-nitrophenol, and control were found to be 39.6 ± 2.3%, 36.7 ± 1.3%, and 30.9 ± 1.8% (total lipids); 27.4 ± 1.4%, 28.3 ± 1.8%, and 19.7 ± 1.5% (total carbohydrates); and 26.7 ± 1.9%, 28.3 ± 1.9%, and 39.9 ± 1.2% (total proteins), respectively. The GC-MS and 1H-NMR spectroscopy attested the incidence of fatty acid methyl esters in the synthesized microalgal biodiesel. The activity of catechol 2,3-dioxygenase and hydroquinone 1,2-dioxygenase in microalgae under heterotrophic conditions has conferred the ortho- and hydroquinone pathways for phenol and p-nitrophenol biodegradation, respectively. Also, the acceleration of fatty acid profiles in microalgae is deliberated under the impact of the phenol and p-nitrophenol biodegradation process. Thus, microalgae enzymes in the metabolic degradation process of phenolic compounds encourage ecosystem sustainability and biodiesel prospects due to the increased lipid profiles of microalgae.

Effects of Bi-Sn-Pb Alloy and Ball-Milling Duration on the Reactivity of Magnesium-Aluminum Waste-Based Materials for Hydrogen Production

In the present study, composite materials were elaborated of mixed scrap of Mg-based casting alloys and low melting point Bi-Sn-Pb alloy by high energy ball milling, and their reactivity in NaCl solution with hydrogen release was tested. The impacts of the additive content and ball milling duration on their microstructure and hydrogen generation performance were investigated. Scanning electron microscopy (SEM) analysis revealed significant microstructural transformations of the particles during milling, and X-ray diffraction analysis (XRD) proved the formation of new intermetallic phases Mg₃Bi₂, Mg₂Sn, and Mg₂Pb. The said intermetallic phases were anticipated to act as 'microcathodes' enhancing galvanic corrosion of the base metal. The dependency of the samples' reactivity on the additive content and milling duration was determined to be nonmonotonic. For the samples with 0, 2.5, and 5 wt.% Rose alloy, ball-milling during 1 h provided the highest hydrogen generation rates and yields (as compared to 0.5 and 2 h), while in the case of the maximum 10 wt.%, the optimal time shifted to 0.5 h. The sample activated with 10 wt.% Rose alloy for 0.5 h provided the highest 'metal-to-hydrogen' yield and rapid reaction, thus overperforming those with lower additive contents and that without additives.

The Influence of Elevated CO2 Concentrations on the Growth of Various Microalgae Strains

The influence of elevated CO₂ concentrations on the growth and viability of various microalgae strains was studied. Arthrospira platensis, Chlorella ellipsoidea, Chlorella vulgaris, Gloeotila pulchra, and Elliptochloris subsphaerica were tested. The cultivation of microalgae was carried out at constant CO₂ concentrations (0.04, 3, 6, or 9%-sequentially from lower to higher concentrations), under constant (24 h·day^-1) illumination with an intensity of 74.3 µmol quanta·m^-2·s^-1, and a constant temperature of 23.5 ± 0.5 °C. The optical density of the microalgae biomass, pH, and the chemical composition of the culture medium were measured. Microscopy (including the cytochemical microscopic method) was conducted to monitor the state of the microalgae. The highest biomass growth rate (0.37 g·L^-1·day^-1), among all experiments, was achieved for Chlorella vulgaris at CO₂ = 3% and for Chlorella ellipsoidea at CO₂ = 6 and 9%. The lowest growth rate (0.12 g·L^-1·day^-1) was achieved for Arthrospira platensis at CO₂ = 3 and 9%. The microscopy results showed the absence or a minimum number of dead cells of the strains under selected conditions. The ability to maintain the viability of cultures up to significant concentrations of CO₂ = 9% was due to adaptation (gradual increase in CO₂ concentrations in the experiments).

Enhanced Hydrogen Generation from Magnesium-Aluminum Scrap Ball Milled with Low Melting Point Solder Alloy

In this investigation, composite materials were manufactured of mixed scrap of Mg-based alloys and low melting point Sn-Pb eutectic by high energy ball milling, and their hydrogen generation performance was tested in NaCl solution. The effects of the ball milling duration and additive content on their microstructure and reactivity were investigated. Scanning electron microscopy (SEM) analysis indicated notable structural transformations of the particles during ball milling, and X-ray diffraction analysis (XRD) proved the formation of new intermetallic phases Mg₂Sn and Mg₂Pb, which were aimed to augment galvanic corrosion of the base metal. The dependency of the material's reactivity on the activation time and additive content occurred to be non-monotonic. For all tested samples ball milling during the 1 h provided, the highest hydrogen generation rates and yields as compared to 0.5 and 2 h and compositions with 5 wt.% of the Sn-Pb alloy, demonstrated higher reactivity than those with 0, 2.5, and 10 wt.%.

Heavy metal tolerance in microalgae: Detoxification mechanisms and applications

The proficiency of microalgae to resist heavy metals has potential to be beneficial in resolving various environmental challenges. Global situations such as the need for cost-effective and ecological ways of remediation of contaminated water and for the development of bioenergy sources could employ microalgae. In a medium with the presence of heavy metals, microalgae utilize different mechanisms to uptake the metal and further detoxify it. Biosorption and the next process of bioaccumulation are two such major steps and they also include the assistance of different transporters at different stages of heavy metal tolerance. This capability has also proved to be efficient in eradicating many heavy metals like Chromium, Copper, Lead, Arsenic, Mercury, Nickel and Cadmium from the environment they are present in. This indicates the possibility of the application of microalgae as a biological way of remediating contaminated water. Heavy metal resistance quality also allows various microalgal species to contribute in the generation of biofuels like biodiesel and biohydrogen. Many research works have also explored the capacity of microalgae in nanotechnology for the formation of nanoparticles due to its relevant characteristics. Various studies have also revealed that biochar deduced from microalgae or a combination of biochar and microalgae can have wide applications specially in deprivation of heavy metals from an environment. This review focuses on the strategies adopted by microalgae, various transporters involved in the process of tolerating heavy metals and the applications where microalgae can participate owing to its ability to resist metals.

Hydrogen Recovery from Waste Aluminum-Plastic Composites Treated with Alkaline Solution

An alternative solution to the problem of aluminum-plastic multilayer waste utilization was suggested. The process can be used for hydrogen generation and layer separation. Three different sorts of aluminum-plastic sandwich materials were treated with an alkali solution. In the temperature range of 50-70 °C, for tablet blisters of polyvinylchloride and aluminum (14.8 wt.%), the latter thoroughly reacted in 15-30 min. For sheets of paper, polyethylene, and aluminum (20 wt.%), full hydrogen 'recovery' from reacted aluminum component took 3-8 min. From the lids of polyethylene terephthalate, aluminum (60 wt.%), and painted polyethylene with perforations, the aluminum was consumed after 45-105 min. The effect of perforations was the reduction of the process duration from nearly 90 min for the lids with no perforations to nearly 45 min for the perforated ones (at 70 °C). Perforations provided better contact between the aluminum foil, isolated between the plastic layers, and the alkali solution. Hydrogen bubbles originating near those perforations provided foil separation from the upper painted plastic layer by creating gas gaps between them. The remaining components of the composite multilayer materials were separated and ready for further recycling.

Microstructural Transformation and Hydrogen Generation Performance of Magnesium Scrap Ball Milled with Devarda's Alloy

A method for magnesium scrap transformation into highly efficient hydroreactive material was elaborated. Tested samples were manufactured of magnesium scrap with no additives, or 5 and 10 wt.% Devarda's alloy, by ball milling for 0.5, 1, 2, and 4 h. Their microstructural evolution and reaction kinetics in 3.5 wt.% NaCl solution were investigated. For the samples with additives and of scrap only, microstructural evolution included the formation of large plane-shaped pieces (0.5 and 1 h) with their further transformation into small compacted solid-shaped objects (2 and 4 h), along with accumulation of crystal lattice imperfections favoring pitting corrosion, and magnesium oxidation with residual oxygen under prolonged (4 h) ball milling, resulting in the lowest reactions rates. Modification with Devarda's alloy accelerated microstructural evolution (during 0.5-1 h) and the creation of 'microgalvanic cells', enhancing magnesium galvanic corrosion with hydrogen evolution. The 1 h milled samples, with 5 wt.% Devarda's alloy and without additives, provided the highest hydrogen yields of (95.36 ± 0.38)% and (91.12 ± 1.19)%; maximum reaction rates achieved 470.9 and 143.4 mL/g/min, respectively. Such high results were explained by the combination of the largest specific surface areas, accumulated lattice imperfections, and 'microgalvanic cells' (from additive). The optimal values were 1 h of milling and 5 wt.% of additive.

Impact of irradiation on physico-chemical and nutritional properties of fruits and vegetables: A mini review

Background

Fruits and vegetables are healthy because they contain good nutrients and secondary metabolites that keep the body healthy and disease-free. Post-harvest losses of fresh fruits and vegetables limit access and availability as a result of foodborne infections and poor storage technologies. The selection of fruits and vegetables depend on the starting microbial load, the size of fruits and vegetables, and the type of infrastructure.

Scope and approach

Despite the positive impacts of conventional thermal (roasting, boiling, blanching) and some non-thermal processing techniques such as High Pressure Processing (HPP), Pulse Electric Field (PEF), Cold Plasma Technology (CPT) on shelf-life extension, their use is commonly associated with a number of negative consequences on product quality such as cold plasma treatment increases the acidity and rate of lipid oxidation and further decrease the colour intensity and firmness of products. Similarly, in high pressure processing and pulse electric field there is no spore inactivation and they further limit their application to semi-moist and liquid foods. On that account, food irradiation, a non-thermal technique, is currently being used for post-harvest preservation, which could be very useful in retaining the keeping quality of various fresh and dehydrated products without negatively affecting their versatility and physico-chemical, nutritional and sensory properties.

Conclusion

Existing studies have communicated the effective influence of irradiation technology on nutritional, sensory, and physico-chemical properties of multiple fruits and vegetables accompanying consequential deduction in microbial load throughout the storage period. Food irradiation can be recognized as a prevalent, safe and promising technology however, still is not fully exploited on a magnified scale. The consumer acceptance of processed products has always been a significant challenge for innovative food processing technologies such as food irradiation. Therefore, owing to current review, additional scientific evidences and efforts are still demanded for increasing its technological request.

Review of air disinfection approaches and proposal for thermal inactivation of airborne viruses as a life-style and an instrument to fight pandemics

COVID-19 (Coronavirus Disease 2019) pandemic highlighted the importance of air biosecurity because SARS-CoV-2 is mainly transmitted from person to person via airborne droplets. Preventing infectious droplets from entering the body is one of the best ways to protect against infection. This paper reviews the transmission patterns of airborne pathogens and air disinfection methods. A particular emphasis is put on studies devoted to the thermal inactivation of viruses. These reviews reveal that air heat treatment has not been seriously considered as a possible air disinfection approach. Simple calculations show that the energy input required for thermal disinfection of human's air daily consumption is almost the same as for daily water consumption (by heat treatment from room temperature to 100 °C). Moreover, it is possible to organize a continuous heat recovery from the air already heated during disinfection to the inlet air, thus significantly increasing the energy efficiency. Therefore, I propose a solution for the thermal inactivation of airborne pathogens based on air heating and its subsequent cooling in a heat exchanger with heat recovery. Such a solution could be used to create mobile personal and stationary indoor air disinfectors, as well as heating, ventilation, and air conditioning systems. Thermal disinfection of air to breathe might one day be part of people's daily life like thermal disinfection of drinking water. Aside from limiting infectious disease transmission, thermal inactivation might be the basis for developing inhaled vaccines using thermally inactivated whole pathogens.

Impact of pyrene (polycyclic aromatic hydrocarbons) pollutant on metabolites and lipid induction in microalgae Chlorella sorokiniana (UUIND6) to produce renewable biodiesel

Pyrene (polycyclic aromatic hydrocarbon), an anthropogenic organic pollutant prevalent in various ecological units, receives more attention for bioremediation and energy transformation using microalgae. In this study, we have used pyrene pollutant (50-500 ppm) to evaluate the half-maximal inhibitory concentrations (IC₅₀) of Chlorella sorokiniana and the impact on metabolites as well as the induction of lipid biosynthesis to produce renewable biodiesel. Pyrene concentration at 230 ppm (IC₅₀) caused half-maximum inhibition for the 96 h incubation. The harvest in the stationary stage (day 16) for C. sorokiniana revealed a biomass generation of 449 ± 7 mg L^-1 and 444 ± 8 mg L^-1 dcw in the control medium and pyrene IC₅₀ medium, respectively. An insignificant decline in biomass generation (1.2%) was observed due to the stress effect of the pyrene IC₅₀ medium on metabolic biosynthesis. Although contrary to biomass generation, IC₅₀ of pyrene assisted to induce lipid biosynthesis in C. sorokiniana. The improvement in lipid biosynthesis was observed as ~24% higher in pyrene IC₅₀ compared to the control medium. The chemical composition of the microalgae biomass, metabolites, and lipids was examined using FTIR spectra. The extracted lipid was transesterified to produce biodiesel via methanolic-H₂SO₄ catalysis. The renewable biodiesel obtained was evaluated using FTIR and ¹H NMR spectra. The transformation efficiency of the lipid of C. sorokiniana in biodiesel was calculated as ~81%. This research offers the incentive in lipid biosynthesis in microalgae cells using pyrene for the production of renewable and sustainable ecological biofuels along with bioremediation of pyrene.

Effect of Thermal Treatment of Aluminum Core-Shell Particles on Their Oxidation Kinetics in Water for Hydrogen Production

The effect of thermal treatment of aluminum core-shell particles on their oxidation kinetics in water for hydrogen production was investigated. The samples were obtained by dividing dried aluminum powder, partially oxidized by distilled water, into eight portions, which were thermally treated at temperatures of 120, 200, 300, 400, 450, 500, 550 and 600 °C. Alumina shell cracking at 500–600 °C enhances hydrogen generation due to uncovering of the aluminum cores, while sharp thickening of the protective oxide film on the uncovered aluminum surfaces at 550–600 °C significantly reduces reactivity of the core-shell particles. For these reasons, after reaction with distilled water at 90 °C for two hours, the highest hydrogen yield (11.59 ± 1.20)% was obtained for the sample thermally treated at 500 °C , while the yield for aluminum core-shell powder without heat treatment was only (5.46 ± 0.13)%. Another set of experiments employed multiple consecutive cycles of alternating oxidation by water and thermal treatment at 500 °C of the same powder sample. As predicted, the hydrogen yield gradually decreased with each subsequent experiment. The series of six cycles resulted in a total hydrogen yield of 53.46%.

3D Bioprinting to Fabricate Living Microalgal Materials

3D bioprinting to fabricate live microalgal materials is an impending technological transformation in the field of microalgal biotechnology. Balasubramanian et al. have demonstrated 3D bioprinting using alginate hydrogel encapsulation to create unique photosynthetically active microalgal biomaterials that are biodegradable, regenerative, and eco-friendly.

Graphitic bio-char and bio-oil synthesis via hydrothermal carbonization-co-liquefaction of microalgae biomass (oiled/de-oiled) and multiple heavy metals remediations

Thermochemical transformation of microalgae biomass into graphitic bio-chars entices as proficient bio-adsorbents for heavy metal contaminants. This study explores the synergistic impact of Chlorella sorokiniana on biomass generation and wastewater remediation in high rate algae pond (HRAP). Biomass produced was applied for hydrothermal carbonization-co-liquefaction (HTCL). The structural and morphological characteristics of HTCL products (i.e. bio-chars and bio-oils) have been systematically studied by XRD, Raman, FTIR, elemental analyzer, SEM, BET, and ¹H NMR spectroscopy. The crystallite size of the graphite 2H indexing planes was to be 4.65 nm and 14.07 nm in the bio-chars of oiled biomass (MB-OB) and de-oiled biomass (MB-DOB), respectively. The increase in the I_D/I_G ratio of MB-DOB indicated the highly disordered graphitic structure due to the appearance of carbonyl, hydroxyl, and epoxy functionalities in the line of high C/N and low C/H ratio. Also, the multiple heavy metals remediation of MB-DOB revealed better efficiency as ~100% in 720 min. The kinetics analysis shows the correlation coefficient of pseudo-second-order is well fitted compared to the pseudo-first-order. The Langmuir adsorption model signifies the adsorption of heavy metal ions in a monolayer adsorption manner. The study proposes the microalgae bio-char potential for multiple heavy metals remediation alongside bio-oils.

Small-scale phyco-mitigation of raw urban wastewater integrated with biodiesel production and its utilization for aquaculture

A low-cost small-scale high-rate algal pond (HRAP) was constructed to investigate the synergistic potential of a novel oleaginous microalga, Chlorella sorokiniana for phyco-mitigation, and biodiesel production using raw urban wastewater. An enhanced nutrient removal (97%), total organic carbon (74%), alkalinity (70%) and hardness (75%) from the wastewater was obtained. The microalga dominated in the HRAP as ~90% increase in the dissolved oxygen with high biomass (1.13 g/L) was noted. The microalga biomass showed sufficient lipid content (~31% of dry cell weight) as compared to control (Bold's Basal media). The total lipid profiling of the microalga cultivated in wastewater showed augmentation in the levels of both storage and neutral lipids with good quality fatty acids composition. Moreover, the sucker fishes grew healthy in the treated wastewater with an increase in body weight.

Detoxification mechanism of organophosphorus pesticide via carboxylestrase pathway that triggers de novo TAG biosynthesis in oleaginous microalgae

Organophosphorus compounds exhibit a wide range of toxicity to mammals. In this study the effect of malathion on the growth and biochemical parameters of microalgae was evaluated. Three microalgae (Micractinium pusillum UUIND2, Chlorella singulari UUIND5 and Chlorella sorokiniana UUIND6) were used in this study. Among the three algal strains tested, Chlorella sorokiniana UUIND6 was able to tolerate 100 ppm of malathion. The photosynthetic pigments, the protein, carbohydrate and lipid contents of microalgal cells were also analyzed. About 90% degradation was recorded in 25 ppm, 50 ppm and 70% was recorded in 100 ppm of malathion by Chlorella sorokiniana. A mechanism of degradation of malathion by Chlorella sorokiniana is proposed in this study. Activity of carboxylesterase was increased in algal cells cultivated in malathion containing medium which confirmed that malathion degraded into phosphate. Increased amount of Malondialdehye (MDA) indicate the development of free radicals under the stress of malathion which substantialy increase de novo TAG biosynthesis, while increased level of superoxide dismutase (SOD), ascorbate peroxidase (APX) and catalase (CAT) suggested their association in scavenging of free radical.

Influence of solvent on the yield and chemical composition of liquid products of hydrothermal liquefaction of Arthrospira platensis as revealed by Fourier transform ion cyclotron resonance mass spectrometry

Yields of liquid products (bio-oil and residual organics in aqueous solution) of hydrothermal liquefaction (at 300℃ and 60 min) of own cultivated Arthrospira platensis using different solvents have been determined. Nonpolar hexane, moderately polar dichloromethane, and relatively more polar acetonitrile have been used. High-resolution mass spectrometry based on linear quadrupole ion trap and Fourier transform mass spectrometer (LTQ FT) has been used for liquid sample characterization. Concentration of bio-oil in a unit of solvent volume after solvent extraction took the following arrangement: acetonitrile > dichloromethane > hexane. Concentration of residual organics in a unit of aqueous solution after solvent extraction took the following arrangement: hexane >dichloromethane > acetonitrile. Yield of total organics was arranged as follows: hexane > dichloromethane > acetonitrile. Content of carbon in bio-oil was increased and the content of oxygen was decreased with the increasing of solvent polarity. From mass spectrometric analysis it was established that in the positive electrospray ionization (ESI) mode the compounds containing two nitrogen atoms dominate and the considerable portion of the compounds containing single nitrogen atom are also presented for both bio-oil and residual organics samples. In the negative ESI mode the compounds containing four oxygen atoms dominated except bio-oil obtained using hexane where the compounds containing two oxygen atoms dominated. Bio-oil fraction had highly saturated compounds with low double bond equivalent values while the compounds of the residual organics fraction had large double bond equivalent values.