Development of dispersive solid phase extraction based on magnetic metal organic framework for the extraction of sunitinib in biological samples and its determination by high performance liquid chromatography-tandem mass spectrometry

Herein, a simple, sensitive, and reliable dispersive solid phase extraction was reported for the efficient extraction of sunitinib from biological samples. To facilitate the extraction of the desired analyte from urine and plasma samples, magnetic MIL-101Cr (NH2) @SiO2 @ NiFe2O4 was synthesized by a hydrothermal method and applied as an effective sorbent during the extraction process. After adsorption of the drug using 10 mg of MIL-101Cr (NH2) @ SiO2 @ NiFe2O4 nanoparticles through vortexing (1 min), the sorbent was separatedfrom the sample solution using a magnet. To eluate the drug, the sorbent containing the sunitinib was contacted with 100 µL dimethylformamide. The eluent was analyzed by high performance liquid chromatography-tandem mass spectrometry. Reasonable validation data consisting of low limits of detection (0.14, 0.35, and 0.70 ng mL-1 in deionized water, plasma, and urine) and quantification (0.48, 1.2, and 2.4 ng mL-1 in deionized water, plasma, and urine, respectively), a wide linear range of the calibration curve (0.48-200, 1.2-200, and 2.4-100 ng mL-1 in deionized water, plasma, and urine, respectively) good extraction recovery (76 %), and low relative standard deviations for inter- and intra-day precisions (6.9 %) were obtained by the method. Eventually, the proposed procedure was effectively implemented on both plasma and urine samples, yielding successful outcomes.

Development of a hollow fiber-liquid phase microextraction method using tissue culture oil for the extraction of free metoprolol from plasma samples

In this research, a method known as a hollow fiber-liquid-phase microextraction was employed to extract and concentrate free metoprolol from plasma samples. The extracted analyte was subsequently determined using high-performance liquid chromatography coupled with a diode-array detector. Several parameters, including hollow fiber length, sonication time, extraction temperature, and salt addition, were investigated and optimized to enhance extraction efficiency. After extracting the analyte under optimum conditions from plasma samples, the enrichment factor and extraction recovery were 50 and 86 %, respectively. Moreover, the method exhibited detection and quantification limits of 0.41 and 1.30 ng mL-1, respectively. The analysis of real samples demonstrated satisfactory relative recoveries in the range of 91-99 %.

Development of a new continuous homogenous liquid phase microextraction procedure based on in-situ preparation of deep eutectic solvent; application in the analysis of aliphatic amines in urine samples by GC-MS

In the present work, a new microextraction procedure combined with gas chromatography-mass spectrometry has been developed for the analysis of several aliphatic amines from urine sample. The sample preparation method was a continuous homogenous liquid phase microextraction that was based on in-situ preparation of 4-chlorophenol: choline chloride deep eutectic solvent. The deep eutectic solvent was prepared by passing the mixture of related compounds through a syringe barrel filled with exothermic salts (calcium chloride and potassium bromide). The released heat by dissolving the salts and increasing the solution ionic strength assists the formation of the deep eutectic solvent. The influence of various factors on the efficiency of the proposed procedure including salts amount, flow rate, pH, salting-out effect, and extraction solvent volume was studied. The calibration curves were linear broadly over the concentration range of 1.2-250 ng mL-1 with coefficient of determinations ≥0.996. The enrichment factors were in the range of 188-246 and the limits of detection and quantification were 0.16-0.37 and 0.56-1.2 ng mL-1, respectively. Based on the results, the offered method was sensitive, rapid, eco-friendly, and efficient for extracting and determining aliphatic amines in urine samples.

Extraction and preconcentration of parabens from the human follicular fluid through dispersive micro solid phase extraction using microporous MIL-68 (In) followed by in-situ effervescence-boosted dispersive liquid-liquid microextraction

For the first time in this study, a microextraction method was developed to perform follicular fluid safety assessment analysis. The drastic importance of follicular fluid safety on the proper nourishment and development of oocytes caused the development of the present method. Since women are regularly exposed to parabens through cosmetics, healthcare, and hygienic products, the infection of body fluids is probable in long-term exposures. Also, for the first time, MIL-68 (In) was applied in an analytical method. Moreover, a new method called in-situ effervescence-boosted dispersive liquid-liquid microextraction was adopted for the simultaneous derivatization and preconcentration of the target parabens. To perform the method, 25 mg of MIL-68 (In) was dispersed into the solution of follicular fluid by vortexing. Then, 1.0 mL of 2-propanol was used to elute the analytes from the absorbent via vortexing. The analyte-enriched organic phase was mixed with 100 µL of acetic anhydride (derivatization agent) and 27 µL 1,2-dibromoethane (extraction solvent) which was swiftly injected into a sodium carbonate solution. Following the centrifugation, the extraction solvent was sedimented at the bottom of a conical bottom glass test tube and an aliquot of it was injected into a gas chromatograph equipped with a flame ionization detector. Wide linear ranges (120-25000 µg L-1), satisfactory extraction recoveries (31-79%) and enrichment factors (31-79), and appreciable limits of detection (7-36 µg L-1) and quantification (25-120 µg L-1) were recorded. The high surface area of MIL-68 (In) (608.82 m2 g-1) and its significantly low average pore diameter (13.829 A°) provide an ideal platform for the extraction of parabens from the complex matrix of follicular fluid.

Development of salt-induced homogeneous liquid-liquid extraction using a deep eutectic solvent performed in a narrow-bore tube for the extraction of Zn(II), Cu(II), and Cd(II) ions from honey samples

In this study, a sample preparation procedure based on salt-induced homogeneous liquid-liquid extraction performed in a narrow-bore tube was used for the preconcentration and extraction of Zn(II), Cu(II), and Cd(II) ions from honey samples. To perform the procedure, a mixture of working solution containing sodium chloride, acetonitrile, and a synthesized deep eutectic solvent (as an extraction solvent) was transferred into a narrow tube filled with solid sodium chloride up to a specific level. As the solution flowed through the tube, tiny droplets of the extraction solvent were formed at the boundary between the solution and salt layer. The droplets moved upwards in the tube and eventually collected as a distinct layer on the top of the solution. The separated phase was removed and dispersed into ionized water. After centrifugation, tiny droplets of the extraction solvent containing the analytes were sedimented at the bottom of the tube. The concentrated analytes were measured using flame atomic absorption spectrophotometry. The linear ranges and extraction recoveries were obtained in the ranges of 1.5-100 μg kg-1 and 89.6-94.8%, respectively. The detection limits ranged from 0.35 to 0.48 μg kg-1. Low relative standard deviations (C = 10 μg L-1, n = 6) of 3.1, 2.8, and 3.4% for Zn(II), Cu(II), and Cd(II), respectively, were obtained. Finally, the optimized method was successfully used in determination of concentration of the selected heavy metal ions in various honey samples.

Streamlined Water-Leaching Preconcentration Method As a Novel Analytical Approach and Its Coupling to Dispersive Micro-Solid-Phase Extraction Based on Synthetically Modified (Fe/Co) Bimetallic MOFs

The streamlined water-leaching preconcentration method is introduced as a novel preconcentration method in this study. The approach has many benefits including low consumption of organic solvent and deionized water and operation time, energy-saving, no need for dispersion or evaporation, and implementation of more efficient preconcentration. Also, a methodological study was done on the synthesis of (Fe/Co) bimetallic-organic framework that eased the synthesis procedure, decreased its time, and enhanced its analytical performance by increasing its surface area, total pore volume, and average pore diameter parameters. To perform the extraction, bi-MOF particles were added into the solution of interest enriched with sodium sulfate. After vortexing to adsorb the analytes, centrifugation isolated the sorbent particles. A microliter-volume of acetonitrile and 1,2-dibromoethane mixture was used for desorption aim via vortexing. After the separation of the organic phase and transferring it into a conical bottom glass test tube, a milliliter volume of sodium chloride solution was applied to leach the organic phase. A gas chromatograph equipped with a flame ionization detector was applied for the injection of the extracted phase. The method was applied for the extraction and preconcentration of some pesticides from juice samples. Wide linear ranges (5.44-1600 μg L-1), low relative standard deviations (3.1-4.5% for intra- (n = 6) and 3.5-5.2% for interday (n = 4) precisions), high extraction recoveries (61-95%), enrichment factors (305-475), and low limits of detection (0.67-1.65 μg L-1) and quantification (2.21-5.44 μg L-1) were obtained for the developed method.

Extraction of Covid-19 drug (Favipiravir) from plasma samples by yolk-shell mesoporous silica before HPLC-MS/MS determination

In this work, a simple and inexpensive dispersive solid phase extraction method using SiO2 @MCM-41-Co3O4 yolk shell as a sorbent was developed for the extraction of favipiravir from plasma samples. The sorbent was synthesized with a simple and novel method. Optimization of the extraction procedure was performed using one parameter at a time strategy. For selective measurement of favipiravir in real samples, multiple reaction monitoring mode in high-performance liquid chromatography-tandem mass spectrometry was used. The synthesized sorbent presented a high adsorption capacity for favipiravir due to its mesoporous structure and different interactions. After optimization of effective parameters including the amount of sorbent, pH, and adsorption and desorption times, the analytical parameters of the method were evaluated. The developed method exhibited a wide linear range from 0.50 to 1000 μg/L. The detection limit and quantification limit of the method were 0.15 and 0.50 μg/L, respectively. The relative standard deviation of the method was obtained by using intra- and inter-day tests, and in both cases, it was less than 6.0%. Finally, the method was successfully used to measure favipiravir in plasma samples with relative recoveries in the range of 87-105%.

Application of magnetic dispersive solid phase extraction combined with solidification of floating organic droplet-based dispersive liquid-liquid microextraction and GC-MS in the extraction and determination of polycyclic aromatic hydrocarbons in honey

A magnetic dispersive solid phase extraction method combined with solidification of floating organic droplet-based dispersive liquid-liquid microextraction has been validated for the extraction of polycyclic aromatic hydrocarbons from honey samples. For this purpose, a carbonised cellulose-ferromagnetic nanocomposite was used as a sorbent through the magnetic dispersive solid phase extraction. For preparation of the sorbent, first, carbonised cellulose nanoparticles were created by treating cellulose filter paper with concentrated solution of sulfuric acid. Then, the prepared nanoparticles were loaded onto Fe3O4 nanoparticles through coprecipitation. In the extraction process, first, a few mg of the sorbent was added to the diluted honey solution and dispersed in it using vortex agitation. The particles were then separated and the adsorbed analytes were eluted with an organic solvent. The eluent was taken and after mixing with a water-immiscible extraction solvent was used in the following solidification of floating organic droplet-based dispersive liquid-liquid microextraction procedure. By performing the extraction process under the obtained optimum conditions, low limits of detection (0.08-0.17 ng g-1) and quantification (0.27-0.57 ng g-1), satisfactory precision (relative standard deviations ≤ 5.0%), and wide linear range (0.57-500 ng g-1) with great coefficients of determination (r2≥ 0.9986) were obtained.

Dispersive solid phase extraction of tacrolimus from biological samples using curcumin and iron-based metal organic frameworks nanocomposite followed by LC-MS/MS determination

Tacrolimus is a potent immunosuppressive drug used in the prevention of tissue rejection. It has a narrow therapeutic index. Therefore, the determination of its concentration in biological fluids like plasma and urine is a very crucial issue. In this research, tacrolimus concentrations in plasma and urine samples were determined with a dispersive solid phase extraction procedure coupled to high-performance liquid chromatography-tandem mass spectrometry. For this purpose, a curcumin modified metal-organic framework was synthesized and used in extraction procedure. Tacrolimus was adsorbed onto the sorbent surface with aid of vortexing. Then, the adsorbed tacrolimus was eluted by a suitable solvent. Important parameters in extraction procedure were optimized by "one-variable-at-a-time" approach and reported as below: sorbent amount, 10 mg; sample solution pH, 2; agitation mode, vortexing; adsorption and desorption times, 1 min, and eluent (volume), methanol (200 µL). Under the optimized conditions and according to the International Council for Harmonization guidelines, the validation of the method was performed, and the results showed acceptable accuracy and precision (relative standard deviations ≤14 %), good linearity in a wide range (4-200 ng mL-1), and low limits of detection (1.2 ng mL-1 in plasma and 0.34 ng mL-1 in urine) and quantification (4.7 ng mL-1 in plasma and 1.12 ng mL-1 in urine). Finally, the validated method was successfully applied for the determination of tacrolimus in the plasma samples of the patients.

In-situ formation of CO2-incorportaed solid sorbent for dispersive solid phase extraction of phenolic compounds from water and wastewater samples prior to gas chromatography-flame ionization detector

BACKGROUND

Herein, a new extraction procedure based on in-situ formation of carbon dioxide-incorporated solid sorbent was introduced for dispersive solid phase extraction of phenolic compounds from aqueous samples. In this study, incorporation of carbon dioxide into the structure of a diamine led to the formation of a solid compound in the sample solution that adsorbed the analytes.

RESULTS

The sample solution was mixed with isophorone diamine and placed under carbon dioxide stream. By doing so, isophorone diamine reacted with carbon dioxide and produced a carbamic acid analogue. It was dispersed into the sample solution as tiny particles that adsorbed the analytes. The adsorbed analytes were eluted by a volatile organic solvent and concentrated more by the vaporization of the eluate. The extraction procedure was done at low temperature to limit the releasing carbon dioxide from the produced compound. To obtain the reliable results, the method was validated and the obtained limits of detection and quantification were in the ranges of 0.29-41 and 0.96-1.3 ng/mL, respectively. Acceptable relative standard deviation (≤7.3%) and coefficient of determination (≥0.994) values confirmed the method repeatability and linearity. High enrichment factors (410-435) and extraction recoveries (82-87%) were attained with the introduced method.

SIGNIFICANCE AND NOVELTY

In this work, a chemical reaction was done between isophorone diamine and carbon dioxide in solution. The produced product (sorbent) was insoluble in solution and dispersed in whole parts of the solution as tiny particles. A high contact area between the sorbent and analytes provided high extraction efficiency for the analytes. The method was successful utilized in determining target analytes in real samples and the matrix effect of the samples had no important effect on the obtained results.

MIL-68 (Ga) for the extraction of derivatized and non-derivatized parabens from healthcare products

This study was the first-ever attempt to apply MIL-68 (Ga) in developing an analytical method. The method extracts and preconcentrates some parabens from mouthwash and hydrating gel samples. The variable extraction parameters were optimized, and the figures of merit were documented. Avogadro software was used besides discussing intermolecular interactions to clarify the absorption process. ComplexGAPI software was also exploited to assess the greenness of the method. After the derivatization of the parabens using acetic anhydride in the presence of sodium carbonate, sodium chloride was added to the solution and vortexed to dissolve. A few milligrams of MIL-68 (Ga) were added into the solution and vortexed. Centrifugation separated the analyte-loaded absorbent, which was treated with mL volume of methanol through vortexing for desorption aim. A few microliters of 1,2-dibromoethane were merged with the methanolic phase and injected into a sodium chloride solution. One microliter of the extracted phase was injected into a gas chromatograph equipped with a flame ionization detector. High enrichment factors (200-330), reasonable extraction recoveries (40-66%), wide linear ranges (265-30,000 µg L-1), and appreciable coefficients of determination (0.996-0.999) were documented. The applicability of dispersive solid phase extraction for extracting polar analytes, imposing no additional step for performing derivatization, the capability of MIL-68 (Ga) for the absorption of both derivatized and non-derivatized parabens, the use of only 10 mg absorbent, and one-pot synthesis besides no high temperature or long reaction time in the sorbent provision are the highlights of the method.

Simultaneous derivatization and extraction of amphetamine and methamphetamine using dispersive liquid-liquid microextraction prior to their analysis using GC-FID in creatine supplements

This study was focused on the development of a sensitive, reliable, and efficient extraction procedure for the determination of amphetamine and methamphetamine utilized in the adulteration of creatine sports supplements. The separation and detection of the analytes were conducted using the gas chromatography-flame ionization detection method. In this study, the analytes were extracted from a supplement powder into a proper solvent by sonication. Then, the extract was mixed with butyl chloroformate to obtain their butylated derivatives and then concentrated by a dispersive liquid-liquid microextraction procedure. The method was performed in a short time. Under optimized extraction conditions, a linear range of 2.01-500 ng g-1 was obtained by a coefficient of determination ≥0.996. Low detection (0.22 ng g-1 and 0.61 ng g-1 for amphetamine and methamphetamine, respectively) and quantification (0.73 ng g-1 and 2.01 ng g-1 for amphetamine and methamphetamine, respectively) limits, good precision (relative standard deviations ≤8.2%), and high extraction recoveries (79% and 86% for amphetamine and methamphetamine, respectively) were achieved. The usefulness of the method in the analysis of the target compounds was confirmed by studying the matrix effect and analysis of the analytes in different real samples.

Surfactant-enhanced air-agitation liquid-liquid microextraction of polycyclic aromatic hydrocarbons from edible oil using magnetic deep eutectic solvent prior to HPLC determination

Herein, an air-agitation liquid-liquid microextraction procedure was developed for the extraction of several polycyclic aromatic hydrocarbons from edible oil samples. In this study, the extraction procedure was achieved using a new magnetic deep eutectic solvent as the extraction solvent, in which there was no need for centrifugation. To enhance the rate of extraction of the analytes from the samples, the method was promoted by the use of surfactant addition. The extracted analytes were determined by high-performance liquid chromatography with a diode array detector. The influence of various parameters on the extraction efficiency was studied by response surface methodology using a central composite design. Under optimal conditions, linear calibration curves for the target analytes were achieved in the range of 0.43-250 ng g-1. The limits of detection and quantification were in the ranges of 0.04-0.13 and 0.13-0.43 ng g-1, respectively. The repeatability of the method in terms of intra- and inter-day precision was ≤4.7% and ≤6.7%, respectively. The extraction recovery of the method ranged from 75 to 88%. The obtained results show that the proposed method is efficient for the analysis of the target analytes in various oil samples without obvious matrix effects. Pyrene was found in olive oil at a concentration of 42 ng g-1.

Polycarbonate-coated magnetic nanoparticles for the extraction of imipramine and its primary metabolite from urine

This study introduces a reliable and inexpensive magnetic dispersive solid phase extraction to extract imipramine and its primary metabolite (desipramine) from urine samples. To accomplish this aim, Fe3 O4 magnetic nanoparticles were synthesized by sonication, subsequently, polycarbonate was precipitated gradually onto the surface of them to form the adsorbent. Extraction recoveries of 85% and 76%, enrichment factors of 57 and 51, limits of detection of 2.5 and 2.8 μg/L, and limits of quantification of 8.3 and 9.3 μg/L were obtained for imipramine and desipramine under the optimal conditions, respectively. In addition, relative standard deviations for intra- (n = 6) and inter-day (n = 5) precisions at two concentrations (50 and 100 μg/L of each analyte) were less than or equal to 4%. Short extraction time, good repeatability, high enrichment factors, and simplicity are the main advantages of the proposed method.

In-situ formation of the adsorbent based on octadecylamine for the extraction of Ag+ ions from aqueous solutions and its determination by microinjection flame atomic absorption spectrometry

In this research, a dispersive solid phase extraction procedure based on changing the solubility of octadecylamine with pH was proposed to determine Ag+ ions in different water samples. For this purpose, first, the pH of sample solution containing the analyte was adjusted to 10.5. Then desired volume of the octadecylamine dissolved in acidic solution was injected into the solution. Because of the low solubility of octadecylamine in alkaline solution, a cloudy state was formed. The produced octadecylamine particles acted as a complexing agent for Ag+ ions and adsorbent for the formed complex. The obtained cloudy solution was centrifuged and the sedimented particles were removed and dissolved in a diluted nitric acid solution. It was injected into a flame atomic absorption spectrometry to determine the extracted amounts of the analyte. The effect of important parameters such as the amount of octadecylamine, volume of nitric acid, and centrifugation and vortexing conditions on the extraction efficiency of the procedure was studied and optimized. In optimal conditions, the developed method showed a linear range of 0.50-200 µg L-1. The limits of detection and quantification were 0.18 and 0.50 µg L-1, respectively. Extraction recovery was 93.6%. The relative standard deviations were less than 4%. The effectiveness of the method was investigated by determination of Ag+ ions in water and wastewater samples.

NiGA MOF-based dispersive micro solid phase extraction coupled to temperature-assisted evaporation using low boiling point solvents for the extraction and preconcentration of butylated hydroxytoluene and some phthalate and adipate esters

The first-ever attempt to apply nickel gallic acid metal-organic framework (NiGA MOF) in analytical method development was done in this research by the extraction of some plasticizers from aqueous media. The greenness of the method is owing to the use of gallic acid and nickel as safe reagents and water as the safest solvent. Low boiling point solvents were applied as desorption solvents that underwent temperature-assisted evaporation in the preconcentration step. Performing the evaporation using a low-temperature water bath for a short period of time streamlines the preconcentration section. Into the solution of interest enriched with sodium sulfate, a mg amount of NiGA MOF was added alongside vortexing to extract the analytes. Following centrifugation and discarding the supernatant, a μL level of diethyl ether was added onto the analyte-loaded NiGA MOF particles and vortexed. The analyte-enriched diethyl ether phase was transferred into a conical bottom glass test tube and located in a water bath set at the temperature of 35 °C under a laboratory hood. After the evaporation, a μL level of 1,2-dibromoethane was added to the test tube and vortexed to dissolve the analytes from the inner perimeter of the tube. One microliter of the organic phase was injected into a gas chromatograph equipped with flame ionization detection. Appreciable extraction recoveries (61-98%), high enrichment factors (305-490), low limits of detection (0.80-1.74 μg L-1) and quantification (2.64-5.74 μg L-1), and wide linear ranges (5.74-1000 μg L-1) were obtained at the optimum conditions.

Selective extraction of apixaban from plasma by dispersive solid-phase microextraction using magnetic metal organic framework combined with molecularly imprinted polymer nanocomposite

This research aims to synthesize a specific and efficient sorbent to use in the extraction of apixaban from human plasma samples and its determination by high-performance liquid chromatography-tandem mass spectrometry. High specific surface area of metal-organic framework, magnetic property of iron oxide nanoparticles, selectively of molecular imprinted polymer toward the analyte, and the combination of dispersive solid-phase extraction method with a sensitive analysis system provided an efficient analytical method. In this study, first, a molecularly imprinted polymer combined with magnetic metal organic framework nanocomposite was prepared and then characterized using different techniques. Then the sorbent particles were used for selective extraction of the analyte from plasma samples. The efficiency of the method was improved by optimizing effective parameters. According to the validation results, wide linear range (1.02-200 ng mL-1 ), acceptable coefficient of determination (0.9938), low limit of detection (0.32 ng mL-1 ) and limit of quantification (1.02 ng mL-1 ), high extraction recovery (78%), and good precision (relative standard deviations ≤ 2.9% for intra- (n = 6) and interday (n = 6) precisions) were obtainable using the proposed method. These outcomes showed the high potential of the proposed method for screening apixaban in the human plasma samples.

Using mandelic acid as an extraction solvent in the extraction of Cu(II) and Cd(II) from soil samples

In this study, an efficient, green, and rapid sample preparation method based on mandelic acid dimer was proposed for the extraction of Cu(II) and Cd(II) from soil samples followed by flame atomic absorption spectrometry. In this research, for the first time, the liquid dimer was prepared by heating solid mandelic acid. Then the mixture of soil and a complexing agent was added into it. The mixture was transferred into a microwave oven. Diluted nitric acid solution as a dilution solvent was added. After centrifugation, two aliquots of the collected phase were removed and injected into the instrument. The relevant optimization parameters such as dimer volume, microwave exposure time, amount of complexing agent, and the type and volume of dilution solvent were investigated and optimized. Under the optimum conditions, detection limits were obtained 0.17 and 0.16 mg Kg-1 for Cu(II) and Cd(II), respectively. The linear ranges were 0.50-50 mg Kg-1 with coefficient of determination ≥ 0.9981. The developed method along with a reference method was applied for the analysis of the selected heavy metal ions in different soil samples and comparable results were obtained. Also, the method was performed on a certified reference material and the obtained concentrations compared with the certificated concentrations to assess accuracy of the proposed method.

Determination of copper(II) and lead(II) ions in dairy products by an efficient and green method of heat-induced homogeneous liquid-liquid microextraction based on a deep eutectic solvent

In this study, a new homogeneous liquid-liquid microextraction method using a deep eutectic solvent has been developed for the extraction of Cu(II) and Pb(II) ions in dairy products. Initially, the deep eutectic solvent was synthesized using choline chloride and p-chlorophenol and used as the extraction solvent. The synthesized solvent was soluble in milk at 70 °C and its separation from the sample was performed by decreasing the temperature. By cooling, a cloudy solution was formed due to the low solubility of the solvent at low temperatures. On centrifugation, the fine droplets of the solvent containing the analytes settled at the bottom of the tube by sedimentation. The enriched analytes were determined by flame atomic absorption spectrometry. The effect of some important parameters such as the amount of protein precipitating agent , complexing agent amount, extraction solvent volume, salt addition, pH, and temperature on the extraction efficiency of the method was studied and optimized. Under the optimal conditions, the linear ranges of the method for Cu(II) and Pb(II) ions were obtained in the ranges of 0.10-50 and 0.50-50 μg L-1 with detection limits of 0.04 and 0.18 μg L-1, respectively. The repeatability of the developed method, expressed as relative standard deviation, was determined to be 3.2 and 3.9% for Cu(II) and Pb(II) ions, respectively. Finally, by determining the concentration of Cu(II) and Pb(II) ions in milk, doogh, and cheese samples, the feasibility of the method was successfully confirmed with the extraction recoveries of 95.9 and 92.1% for Cu(II) and Pb(II) ions, respectively.

Development of homogeneous dispersive solid phase extraction using albumin as a green sorbent and its combination with dispersive liquid-liquid microextraction: application in extraction of pesticides from fruit juices

In the current study, salt- and pH-induced homogeneous dispersive solid phase extraction was developed using albumin as a sorbent for the extraction of some pesticides (diazinon, diniconazole, haloxyfop-R-methyl, and hexaconazole) from fruit juice of orange, pomegranate, and barberry. The extracted analytes were more concentrated by dispersive liquid-liquid microextraction to obtain high enrichment factors and low detection limits prior to their determination by gas chromatography-mass spectrometry. In the extraction process, human serum albumin solution was added to the sample solution at the μL-level and a homogeneous solution was obtained. Then, albumin was precipitated into the solution by adding an inorganic salt and decreasing the solution pH. By doing so, the analytes were adsorbed by albumin effectively due to their high adsorption capacity and large surface area. Following this, the pesticides were eluted from the albumin sorbent using an elution solvent and used in a dispersive liquid-liquid microextraction step. Under the optimum extraction conditions, low limits of detection and quantification were achieved in the ranges of 0.02-0.04 and 0.07-0.13 ng mL-1, respectively. The calibration curves were linear in the range of 0.13-250 ng mL-1. Relative standard deviation as a criterion for precision and the method repeatability were in the ranges of 2.9-4.2% for intra- (n = 5, C = 5 or 50 ng mL-1) and 3.2-5.2% for inter-day (n = 5, 50 ng mL-1) precisions. The enrichment factors and extraction recoveries were in the ranges of 390-460 and 78-92%, respectively. Finally, the offered procedure was applied for the analysis of pesticide residues in some fruit juice samples.

Introduction of a new and safe synthesis procedure for Ni-MOF-I in aqueous solution and its application for the extraction of some pesticides from different beverages

For the first time, this research introduces an analytical application of Ni-MOF-I, which was used as an adsorbent in a dispersive micro solid phase extraction procedure followed by dispersive liquid-liquid microextraction for the extraction and preconcentration of seven pesticides from different fruit juices. Also, Ni-MOF-I was synthesized by a new and green method with many advantages over the previously published synthesis procedures. For example, effortless and green synthesis, no need for autoclaves and ovens, and elimination of organic solvent usage are the main highlights. The synthesized Ni-MOF-I was characterized by applying nitrogen adsorption/desorption, energy-dispersive X-ray, scanning electron microscopy, Fourier transform infrared spectrophotometry, and X-ray diffraction analyses. The studied pesticides were extracted and preconcentrated by the proposed method. Then, the extracted analytes in the sedimented organic phase were injected into a gas chromatography-flame ionization detector. Acceptable analytical results such as low limits of detection (0.15-0.60 μg L-1) and quantification (0.50-2.0 μg L-1), reasonable extraction recoveries (51-80%), high enrichment factors (255-400), satisfactory relative standard deviation values of 4.8-7.2% (intra-day precision, n = 6) and 5.3-7.5% (inter-day precision, n = 4), and wide linear ranges were obtained. The proposed method can be introduced as an effective analytical technique based on Ni-MOF-I for the analysis of different pesticides in fruit beverages.

In-situ formation of a solid adsorbent for the extraction of some metal ions from crude oil before their determination by microflow nebulizer inductively coupled plasma-mass spectrometry

The presence of heavy metals in crude oil can create different problems on the oil processing and devices as well as pollution of the environment. Establishment of sample preparation methods for the extraction of metals from crude oil is the bottleneck of a successful determination method due to high hydrophobicity and complexity of crude oil matrix. In this study, a dispersive solid phase extraction procedure was developed for the simultaneous extraction of sixteen metal ions based on in-situ formation of an adsorbent in the sample solution. For this purpose, a suitable amount of dithiooxamide was dissolved in an organic solvent and was injected into the sample solution. By this action, dithiooxamide was re-precipitated in the sample solution and adsorbed the ions. The solid particles were separated and then the ions were eluted by a few microliters of choline chloride: 5-amino-8-hydroxyquinoline deep eutectic solvent under sonication. The presented method was validated and broad linear ranges (7.56-50000 ng g^-1) were obtained for calibration curves with coefficient of determination ≥0.992. Acceptable limits of detection (0.003-2.32 ng g^-1) and quantification (0.009-7.56 ng g^-1) were achieved. Good precision (relative standard deviation less than or equal to 4.3% for intra and inter-day precisions) and acceptable extraction recoveries (66-91%) were also obtained. Seven crude oil samples were analyzed and ten metal ions were determined successfully. The method was compared with the methods reported in literature and it was found that the data obtained by this method were reliable and accurate.

Determination of metronidazole and clarithromycin in plasma samples using surfactant-modified amorphous carbon-based DSPE combined with DLLME followed by HPLC

This work offers preparation of surfactant-modified amorphous carbon and its application in dispersive solid phase extraction of metronidazole and clarithromycin from plasma samples. The extraction procedure was combined with dispersive liquid-liquid microextraction for further preconcentration of the analytes for sensitive determination of the analytes followed by high performance liquid chromatography-diode array detector. In this work, first, the sorbent was added to the sample and the mixture vortexed to adsorb the analytes. Then, the obtained supernatant after centrifuging is discarded and the loaded analytes onto the sorbent surface were eluted with a water-miscible organic solvent. In the following, to further enrichment of the analytes the microextraction step was done. For this purpose, the eluate is taken, mixed with a water-immiscible organic solvent, and injected into deionized water. After centrifuging, an aliquat of the sedimented phase is taken and injected into the analytical instrument for the quantitative analysis. Under the optimum extraction conditions, high extraction recoveries (79 and 89% for metronidazole and clarithromycin, respectively), low limits of detection (2.1 and 1.9 ng mL^-1 for metronidazole and clarithromycin, respectively) and quantification (7.0 and 6.3 ng mL^-1 for metronidazole and clarithromycin, respectively), good repeatability (relative standard deviations less than 4.3% for intra- and 6.3% inter-day precisions), and wide linear ranges (7.3-1000 and 6.3-1000 ng mL^-1 for metronidazole and clarithromycin, respectively) were obtained. At the end, the introduced method was applied on the plasma samples of the patients treated with metronidazole and clarithromycin successfully.

In situ formation of chloroform for dispersive liquid-liquid microextraction of some aromatic amines from aqueous samples optimized by central composite design prior to GC-MS analysis

In the current research, an in situ solvent formation-liquid phase microextraction method based on chloroform has been introduced as an efficient sample preparation procedure and applied for the extraction and preconcentration of some aromatic amines from wastewaters. In this method, chloral hydrate (2,2,2-trichloroethane-1,1-diol) was added to an alkaline solution of the samples in order to form chloroform as an extraction solvent in the sample solution. Thus, the selected analytes were transferred from the aqueous solution into the tiny droplets of the produced chloroform. Following this, the extracted and enriched analytes were quantified using a gas chromatograph-mass spectrometer. Experimental conditions of the proposed method including the chloral hydrate amount, salt effect, extraction time, and sodium hydroxide concentration were studied and optimized by a central composite design approach. By the offered method, high enrichment factors (292-324) with satisfactory extraction recoveries (82-91%), low limits of detection (0.26-0.39 ng mL^-1), and proper repeatability (relative standard deviations ≤6.3% for intra- and inter-day precisions) were achieved under optimum conditions. Eventually, the suggested method was assessed through the quantification of aromatic amines in aqueous samples.

Liquid Phase Microextraction of Hazardous Compounds in Dairy Products; Principal and Practical Aspects

Liquid phase microextraction techniques are considered as the miniaturized version of traditional liquid-liquid extraction, which use only several microliters of a proper solvent to extract the analytes from sample. In these methods, the target analytes are migrated into a water-immiscible organic solvent (acceptor phase) from an aqueous sample (donor phase). They are mainly classified into three main groups including (a) single-drop microextraction, (b) dispersive liquid-liquid microextraction, and (c) hollow fiber-liquid phase microextraction. These techniques have been successfully applied to the assessment of different analytes in food samples, pharmaceuticals, beverages, and so on. This review mainly focuses on up-to-date information on the application of liquid phase microextraction techniques in dairy products. The advantages and disadvantages of the developed liquid phase microextraction methods were discussed.

An all-embracing analytical method comprising modified QuEChERS-dispersive micro-solid-phase extraction-dispersive liquid-liquid microextraction using FeGA MOF for the extraction and preconcentration of pesticides simultaneously from juice and flesh of watermelon

For the first time, a comprehensive analytical method based on a one-dimensional metal-organic framework comprising "quick, easy, cheap, effective, rugged, and safe-dispersive micro solid phase extraction-dispersive liquid-liquid microextraction" was introduced in this research. Moreover, the first-ever attempt was accomplished to apply the iron-gallic acid metal-organic framework in analytical method development. The goal of the research was to analyze the pesticide content of watermelon comprehensively in its flesh and juice. Based on this, comprehensive and reliable food safety monitoring can be done. Initially, pesticides of the watermelon flesh were extracted using an mL volume of acetonitrile by vortexing. At the same time, the pesticides of watermelon juice were extracted from the juice matrix onto the sorbent particles facilitated by vortexing. The obtained acetonitrile phase was also used to desorb the analytes from the sorbent surface by vortexing. As a result, the pesticide content of both juice and flesh was extracted into the acetonitrile. The pesticide-enriched acetonitrile was then used as the disperser solvent by being merged with µL level of 1,2-dibromoethane and injection into deionized water. A cloudy solution was created as the result. Centrifugation triggered extractant at the bottom of the conical glass test tube and an aliquot of it was injected into a gas chromatograph equipped with a flame ionization detector. High enrichment factors (210-400), appreciable extraction recoveries (42-80%), wide linear ranges (3.20-1000 µg kg^-1), relative standard deviations in the ranges of 3.6-4.4% for intra- (n = 6) and 4.4-5.3% for inter-day (n = 3) precisions, and low limits of detection (0.43-0.97 µg kg^-1), and quantification (1.42-3.20 µg kg^-1) were obtained by the application of the developed method.

CuBTC metal organic framework-based dispersive solid phase extraction of cyclosporine and tacrolimus from plasma samples prior to determination by high performance liquid chromatography-tandem mass spectrometry

Immunosuppressive drugs are prescribed to reduce the immune system of persons who are undergoing organ transplants. The concentration of these drugs in blood and plasma samples must be accurately and precisely determined during immunosuppressive therapy due to their significant side effects. In this study, a metal organic framework-based dispersive solid phase extraction method was developed for the extraction of tacrolimus and cyclosporine from plasma samples before their determination by high performance liquid chromatography-tandem mass spectrometry. For this purpose, CuBTC metal organic framework nanoparticles were prepared by a hydrothermal approach and they were used as the sorbent in the extraction procedure. The adsorbed analytes were eluted by a suitable organic solvent and then more concentrated by evaporation of the eluate. All of the effective parameters of the method including sorbent amount, adsorption time, eluent type, desorption time, eluent volume, and sample solution pH were studied and optimized. They were obtained 5 mg, 5 min, acetone, 5 min, 300 μL, and 5, respectively. Under optimal conditions, the developed method was validated and the data showed that the linear range, the limit of detection, the limit of quantification, the coefficient of determination, the enrichment factor, and relative standard deviation values were 1-1000 ng mL^-1, 0.30 ng mL^-1, 0.5 ng mL^-1, 0.99, 15.6, and 5.8 % for tacrolimus and 0.8-500 ng mL^-1, 0.25 ng mL^-1, 0.4 ng mL^-1, 0.99, 17, and 5.6 % for cyclosporine, respectively. Finally, the method was successfully used in the determination of the studied drugs in plasma samples.

Dispersive solid phase extraction of metronidazole and clarithromycin from human plasma using a β-cyclodextrin grafted polyethylene polymer composite

In this work, for the first time, a polymeric composite based on β-cyclodextrin grafted with polyethylene has been prepared through ball milling and used as an efficient sorbent for dispersive solid phase extraction of metronidazole and clarithromycin from plasma samples. The prepared sorbent was characterized using Fourier transform infrared spectrophotometry, X-ray diffraction, and scanning electron microscopy. In the extraction process, after precipitating the proteins, the sorbent was added into the sample solution, and the mixture was vortexed to facilitate and speed up the sorption of the analytes onto the sorbent surface. After centrifuging, the sorbent particles were contacted with methanol to elute the analytes under the vortexing process. After this step, an aliquot of the eluate was taken and injected into high-performance liquid chromatography-diode array detector for quantitative analysis. Under the optimum extraction conditions, the extraction recoveries for metronidazole and clarithromycin were 76 and 83%, respectively. The limits of detection were 2.6 and 2.2 ng/ml for metronidazole and clarithromycin, respectively. The repeatability of the offered approach, expressed as relative standard deviation, was equal to or less than 4.7%. Finally, the method was successfully applied to plasma samples of the patients treated with metronidazole and clarithromycin.

Magnetic dispersive solid-phase extraction of some pesticides from fruit juices using monodisperse nanosorbent combined with dispersive liquid-liquid micro-extraction

In this study, the new synthesized magnetic nanoparticles based on amorphous carbon have been used as a sorbent in magnetic dispersive solid-phase extraction prior to dispersive liquid-liquid micro-extraction. The developed method was applied for analysis of ten pesticides from different fruit juice samples by gas chromatography-flame ionization detection. In this work, a few mg of the sorbent is added into an aqueous solution containing the analytes. Adsorption and desorption of the compounds of interest are accelerated by vortexing and sonication, respectively. To achieve high enrichment factors, a suitable organic solvent (iso-propanol) is used to elute the target analytes from the nanosorbent. The obtained iso-propanol is phased and 1,1,2-trichloroethane are employed as the disperser and extraction solvents, respectively, in the following micro-extraction procedure. The synthesized magnetic nanoparticles were characterized by scanning electron microscope, X-ray diffraction, vibrating sample magnetometer, and Fourier-transform infrared spectrophotometer. To achieve the high extraction efficiency and optimum conditions, all parameters that could affect the extraction yield were investigated. Under optimum conditions, the method had broad linear ranges with a proper linearity (r² ≥ 0.9987). Limits of detection and quantification for analysis of the selected pesticides were found in the ranges of 0.5-1.0 and 1.7-3.3 µg L^-1, respectively. High enrichment factors and extraction recoveries were obtained in the ranges of 321-438 and 64-88%, respectively. To evaluate repeatability of the method, it was performed on two sets of standard solutions at the concentrations of 10 and 50 µg L^-1 (each analyte). Relative standard deviations varied in the ranges of 2-6% and 4-7% for intra- (n = 6) and inter-day (n = 5) precisions, respectively.

Deep eutectic solvent-based iron nanoparticles coated by N, S-doped amorphous carbon and its application in magnetic Dµ-SPE combined with DLLME for the extraction of PAHs in eyeliner

This work presents a preparation of new magnetic nanoparticles coated with amorphous carbon and their application in dispersive solid-phase extraction in simultaneous extraction of sixteen polycyclic aromatic hydrocarbons from eyeliner. The extraction procedure was hyphenated with a lower density than water dispersive liquid-liquid microextraction (DLLME) for further preconcentration of the analytes to sensitive determination of them with gas chromatography-flame ionization detection. The magnetic adsorbent was prepared sonically from iron pentacarbonyl and then the nanoparticles were coated by N, S-doped amorphous carbon and the deep eutectic solvent prepared from tetrabutyl ammonium chloride and decanoic acid. The magnetic properties of the nanoparticles were studied by vibrating sample magnetometer. Also, scanning electron microscopy was used to investigate the nanoparticles morphology. The extraction procedure was done by migration of the analytes from eyeliner into a proper aqueous solution and their adsorption onto the nanoparticles. Then, the analytes were eluted and more concentrated by the DLLME approach. After validating the method, acceptable limit of detection and broad linear range were accessed in the ranges of 0.25-0.54 and 1.8-250 ng/g, respectively. Relative standard deviation values were ≤ 7.1% for the repeated analyses in the same day (n = 6) and different days (n = 6). Extraction recovery of the method was in the range of 79-96%. The introduced method was successfully used for the analysis of the PAHs in five eyeliner samples and only two of them were identified in all samples at ng/g level.

Recent Advances in Impedimetric Biosensors Focusing on Myocardial Infarction Diagnosis

Acute myocardial infarction is the most common cardiovascular disease and 85% of cardiovascular disease-related deaths are associated with it. The variation in the cardiac troponin concentration is considered as the most significant judge index for acute myocardial infarction diagnosis. Here, a comprehensive insights is given about the impedimetric methods as powerful electrochemical biosensing platforms for cardiac troponin evaluation. Focusing on nano materials, various impedimetric techniques including faradaic and non-faradaic techniques and different transducer modification techniques are addressed. The steps taken by each of the studied platforms to solve the existing problems are discussed and their advantages and drawbacks are highlighted. A glance at the provided table is given a mind into the features of each impedimetric sensors and their comparison are provided.

Evaluation of MXene as an adsorbent in dispersive solid phase extraction of several pesticides from fresh fruit juices prior to their determination by HPLC-MS/MS

This study aimed to introduce a dispersive solid phase extraction method based on MXene nanoparticles as a novel sorbent for the simultaneous extraction and determination of twelve pesticides from fresh fruit juices. In the following, a high performance liquid chromatography-tandem mass spectrometry was used for their determination in the samples. In this method, two-dimensional nanomaterials of Ti₂AlC were exfoliated in an acidic solution and then they were added into the sample solution. To enhance the sample solution and sorbent contact area, the mixture was vortexed for a few minutes. Then the adsorbed analytes onto the sorbent were eluted using acetone and then analyzed. Under optimal conditions, the calibration curves of the method were linear within the range of 3.0-1000 µg L^-1. The limits of detection, intra- and inter-day relative standard deviations, and extraction recoveries were in the ranges of 0.08-1.0 µg L^-1, 2.5-4.2%, 2.5-5.5%, and 69-75%, respectively. Performing the method verified the presence of some of the analytes in several samples. This method can help to monitor pesticides in juice samples as well as to improve our understanding the safety of foods.

Deep Eutectic Solvents for Extraction and Preconcentration of Organic and Inorganic Species in Water and Food Samples: A Review

Deep eutectic solvents (DESs) have been developed as green solvents and these are capable as alternatives to conventional solvents used for the extraction of organic and inorganic species from food and water samples. The continuous generation of contaminated waste and increasing concern for the human health and environment have compelled the scientific community to investigate more ecological schemes. In this concern, the use of DESs have developed in one of the chief approach in the field of chemistry. These solvents have appeared as a capable substitute to conventional hazardous solvents and ionic liquids. The DESs has distinctive properties, easy preparation and components availability. It is not only used in scienctific fields but also used in quotidian life. There are many advantages of DESs in analytical chemistry, they are largely used for extraction and determination of inorganic and organic compounds from different samples. In previous a few years, several advanced researches have been focused on the separation and preconcentration of low level of pollutants using DESs as the extractants. This review summarizes the use of DESs in the separation and preconcentration of organic and inorganic species from water and food samples using various microextraction processes.

Improved magnetic solid-phase extraction based on magnetic sorbent obtained from sand for the extraction of pesticides from fruit juice

BACKGROUND

A combination of magnetic solid-phase extraction using an efficient and cheap magnetic sorbent obtained from sand and dispersive liquid-liquid microextraction has been developed for the extraction of nine multiclass pesticides (clodinafop-propargyl, haloxyfop-R-methyl, fenoxaprop-P-ethyl, oxadiazon, penconazole, diniconazole, chlorpyrifos, fenazaquin, and fenpropathrin) from commercial fruit juices (sour cherry, pomegranate, grape, watermelon, orange, apricot, and peach juices). The enriched pesticides were determined by gas chromatography-flame ionization detector and gas chromatography-mass spectrometry. The sorbent was natural iron oxide entrapped in silica along with some impurities. In this method, to extract the analytes from the samples, an appropriate amount of the magnetic sorbent (at mg level) is added. Then the sorbent particles are isolated from the solution using an external magnetic field and the adsorbed analytes are desorbed from the sorbent by acetone. In the following, a dispersive liquid-liquid microextraction procedure is carried out to concentrate the analytes more and to reach low limits of detection.

RESULTS

Under optimized extraction conditions, the method revealed satisfactory repeatability (relative standard deviation ≤8% for intra-day and inter-day precision), reasonable extraction recovery (43.3-55.9%), high enrichment factors (433-559), and low limits of detection (0.45-0.89 μg L^-1 ).

CONCLUSION

The method was applied in the analysis of pesticides in various fruit juices. Chlorpyrifos was found in peach juice at a concentration of 27 ± 2 μg L^-1 (n = 3) using a gas chromatography-flame ionization detector. To verify the results, the peach juice was also injected into gas chromatography-mass spectrometry after applying the proposed extraction method. © 2022 Society of Chemical Industry.