Surface geochemistry of the clay minerals

Clay minerals are layer type aluminosilicates that figure in terrestrial biogeochemical cycles, in the buffering capacity of the oceans, and in the containment of toxic waste materials. They are also used as lubricants in petroleum extraction and as industrial catalysts for the synthesis of many organic compounds. These applications derive fundamentally from the colloidal size and permanent structural charge of clay mineral particles, which endow them with significant surface reactivity. Unraveling the surface geochemistry of hydrated clay minerals is an abiding, if difficult, topic in earth sciences research. Recent experimental and computational studies that take advantage of new methodologies and basic insights derived from the study of concentrated ionic solutions have begun to clarify the structure of electrical double layers formed on hydrated clay mineral surfaces, particularly those in the interlayer region of swelling 2:1 layer type clay minerals. One emerging trend is that the coordination of interlayer cations with water molecules and clay mineral surface oxygens is governed largely by cation size and charge, similarly to a concentrated ionic solution, but the location of structural charge within a clay layer and the existence of hydrophobic patches on its surface provide important modulations. The larger the interlayer cation, the greater the influence of clay mineral structure and hydrophobicity on the configurations of adsorbed water molecules. This picture extends readily to hydrophobic molecules adsorbed within an interlayer region, with important implications for clay-hydrocarbon interactions and the design of catalysts for organic synthesis.

Secretion of a bacterial cellulase by yeast

Gene fusions were constructed between a yeast expression plasmid and a Cellulomonas fimi DNA fragment encoding an endo-1,4-beta-D-glucanase or carboxymethylcellulase. Yeast transformed with the recombinant plasmids secreted carboxymethylcellulase activity. Secretion of active enzyme was greatly increased when the leader of a secreted yeast protein, the Kl toxin, was inserted immediately upstream of and in frame with the bacterial cellulase sequence. This is the first step in constructing a functional cellulase complex in Saccharomyces cerevisiae. It also provides an excellent system for the detailed examination of the determinants of protein secretion because of the ease with which secreted cellulase can be detected.

The Three-Dimensional Structure of Water Confined in Nanoporous Vycor Glass

Neutron diffraction data, in conjunction with isotopic substitution of deuterium (D) for hydrogen (H), have been analyzed to determine the three-dimensional structure of water confined in vycor, an archetypal hydrophilic porous silica glass containing channels or pores of approximately 40 A diameter. The data have been incorporated into a Monte Carlo computer simulation of the confined water system, and the site-site potentials have been iteratively refined in order to produce a model ensemble which is consistent with both the neutron diffraction data and two possible geometries of the vycor pores (cylindrical and spherical). This approach has allowed us to investigate in detail the contributions to the experimentally accessible partial pair correlation functions, and ascertain whether particular features arise from interactions of the water molecules with the substrate surface, or from purely geometrical confinement effects. We observe a significant decrease in the first shell water oxygen-oxygen co-ordination number, and a decrease in the number of hydrogen bonds per water molecule from approximately 3.6 in bulk water to approximately 2.2 in confinement. In addition, we observe a significant shift inward of the second peak in the water oxygen-water oxygen coordination shell. Overall, we therefore find that the structure of the water in vycor is strongly perturbed relative to the bulk.

Structural studies of ammonia and metallic lithium-ammonia solutions

The technique of hydrogen/deuterium isotopic substitution has been used to extract detailed information concerning the solvent structure in pure ammonia and metallic lithium-ammonia solutions. In pure ammonia we find evidence for approximately 2.0 hydrogen bonds around each central nitrogen atom, with an average N-H distance of 2.4 A. On addition of alkali metal, we observe directly significant disruption of this hydrogen bonding. At 8 mol % metal there remains only around 0.7 hydrogen bond per nitrogen atom. This value decreases to 0.0 for the saturated solution of 21 mol % metal, as all ammonia molecules have then become incorporated into the tetrahedral first solvation spheres of the lithium cations. In conjunction with a classical three-dimensional computer modeling technique, we are now able to identify a well-defined second cationic solvation shell. In this secondary shell the nitrogen atoms tend to reside above the faces and edges of the primary tetrahedral shell. Furthermore, the computer-generated models reveal that on addition of alkali metal the solvent molecules form voids of approximate radius 2.5-3.0 A. Our data therefore provide new insight into the structure of the polaronic cavities and tunnels, which have been theoretically predicted for lithium-ammonia solutions.

Mode of action of yeast toxins: energy requirement for Saccharomyces cerevisiae killer toxin

The role of the energy status of the yeast cell in the sensitivity of cultures to two yeast toxins was examined by using 12K release from cells as a measure of toxin action. The Saccharomyces cerevisiae killer toxin bound to sensitive cells in the presence of drugs that interfered with the generation or use of energy, but it was unable to efflux 12K from the cells under these conditions. In direct contrast, the Torulopsis glabrata pool efflux-stimulating toxin induced efflux of the yeast 42K pool was insensitive to the presence of energy poisons in cultures. The results indicate that an energized state, maintained at the expense of adenosine 5'-triphosphate from either glycolytic or mitochondrial reactions, is required for the action of the killer toxin on the yeast cell.

Analysis of the inducible MEL1 gene of Saccharomyces carlsbergensis and its secreted product, alpha-galactosidase (melibiase)

We have determined both the nucleotide sequence of the MEL1 gene of Saccharomyces carlsbergensis and the N-terminal amino acid (aa) sequence of its extracellular gene product, alpha-galactosidase (melibiase) (alpha-Gal). The predicted translation product of MEL1 is a pre-alpha-Gal protein containing an 18 aa N-terminal signal sequence for secretion. The purified enzyme is a dimer consisting of two 50-kDal polypeptides, each of which is glycosylated with no more than eight side chains. The 5'-flank of the MEL1 gene contains a region (UASm) having certain areas of sequence homology to similar sites found upstream of the structural genes GAL1, GAL7 and GAL10, which are also regulated by the action of the products of genes GAL4 and GAL80. There are three TATA boxes between UASm and the initiation codon of pre-alpha-Gal, as well as a typical yeast cleavage/polyadenylation sequence in the 3'-flank of the gene.

Cloning and sequencing of the preprotoxin-coding region of the yeast M1 double-stranded RNA

Complementary DNA (cDNA) copies of the M1-1, toxin-coding region of the yeast M1 double-stranded RNA (dsRNA) have been cloned and sequenced. These sequences, in combination with the known terminal sequence of M1-1 dsRNA, identify a translation reading frame for a 316 amino acid protein of 34.7 kd, similar in size to the preprotoxin produced from M1 dsRNA by in vitro translation. Potential glycosylation sites in the preprotoxin peptide are identified. Based on its methionine content the extracellular yeast toxin appears to be contained within the C-terminal region of the precursor.

Scalable method for the reductive dissolution, purification, and separation of single-walled carbon nanotubes

As synthesized, bulk single-walled carbon nanotube (SWNT) samples are typically highly agglomerated and heterogeneous. However, their most promising applications require the isolation of individualized, purified nanotubes, often with specific optoelectronic characteristics. A wide range of dispersion and separation techniques have been developed, but the use of sonication or ultracentrifugation imposes severe limits on scalability and may introduce damage. Here, we demonstrate a new, intrinsically scalable method for SWNT dispersion and separation, using reductive treatment in sodium metal-ammonia solutions, optionally followed by selective dissolution in a polar aprotic organic solvent. In situ small-angle neutron scattering demonstrates the presence of dissolved, unbundled SWNTs in solution, at concentrations reaching at least 2 mg/mL; the ability to isolate individual nanotubes is confirmed by atomic force microscopy. Spectroscopy data suggest that the soluble fraction contains predominately large metallic nanotubes; a potential new mechanism for nanotube separation is proposed. In addition, the G/D ratios observed during the dissolution sequence, as a function of metal:carbon ratio, demonstrate a new purification method for removing carbonaceous impurities from pristine SWNTs, which avoids traditional, damaging, competitive oxidation reactions.

Membrane-mediated killing of Saccharomyces cerevisiae by glycoproteins from Torulopsis glabrata

Cell-free supernatants from cultures of Torulopsis glabrata contained glycoprotein toxins that killed sensitive and killer strains of Saccharomyces cerevisiae with single-hit kinetics. Growing S. cerevisiae treated with the toxins showed a leakage of cellular potassium, partial dissipation of the adenosine triphosphate pool, and a coordinate shutdown of macromolecular synthesis. These pool efflux-stimulating toxins have been partially purified and at least three toxic glycoproteins have been separated. Pool efflux-stimulating toxin activity was stable from pH 3 through 7, though killing was maximal close to pH 4.

The expression of cDNA clones of yeast M1 double-stranded RNA in yeast confers both killer and immunity phenotypes

Two cDNA clones of the segment of Saccharomyces cerevisiae M1 double-stranded RNA, which codes for the yeast killer toxin, have been expressed in yeast using the expression vector pYT760. Toxin expression and secretion depended upon the presence of a yeast promoter. Transformants not only contain an authentic preprotoxin precursor, as determined by precipitation of intracellular proteins with antitoxin antisera, but also display an immunity phenotype. The evidence is that the immunity protein is part of the preprotoxin and may act by masking toxin binding sites. Neither cDNA clone had a complete 5' terminus and the preprotoxin translational start was missing. The promoter and the initiator ATG were supplied by the expression vector. One clone with a full-length preprotoxin but altered N-terminal amino acids gave a normal glycosylated intracellular precursor. A clone with an N-terminal nine amino acid deletion gave a precursor which was not glycosylated but toxin was still secreted.

Monte Carlo and molecular dynamics simulations of methane in potassium montmorillonite clay hydrates at elevated pressures and temperatures

The structure and dynamics of methane in hydrated potassium montmorillonite clay have been studied under conditions encountered in sedimentary basin and compared to those of hydrated sodium montmorillonite clay using computer simulation techniques. The simulated systems contain two molecular layers of water and followed gradients of 150 bar km(-1) and 30 K km(-1) up to a maximum burial depth of 6 km. Methane particle is coordinated to about 19 oxygen atoms, with 6 of these coming from the clay surface oxygen. Potassium ions tend to move away from the center towards the clay surface, in contrast to the behavior observed with the hydrated sodium form. The clay surface affinity for methane was found to be higher in the hydrated K-form. Methane diffusion in the two-layer hydrated K-montmorillonite increases from 0.39 x 10(-9) m2 s(-1) at 280 K to 3.27 x 10(-9) m2 s(-1) at 460 K compared to 0.36 x 10(-9) m2 s(-1) at 280 K to 4.26 x 10(-9) m2 s(-1) at 460 K in Na-montmorillonite hydrate. The distributions of the potassium ions were found to vary in the hydrates when compared to those of sodium form. Water molecules were also found to be very mobile in the potassium clay hydrates compared to sodium clay hydrates.

Expression and Secretion of a Cellulomonas fimi Exoglucanase in Saccharomyces cerevisiae

We used the yeast MEL1 gene for secreted alpha-galactosidase to construct cartridges for the regulated expression of foreign proteins from Saccharomyces cerevisiae. The gene for a Cellulomonas fimi beta-1,4-exoglucanase was inserted into one cartridge to create a fusion of the alpha-galactosidase signal peptide to the exoglucanase. Yeast transformed with plasmids containing this construction produced active extracellular exoglucanase when grown under conditions appropriate to MEL1 promoter function. The cells also produced active intracellular enzyme. The secreted exoglucanase was N-glycosylated and was produced continuously during culture growth. It hydrolyzed xylan, carboxymethyl cellulose, 4-methylumbelliferyl-beta-d-cellobiose, and p-nitrophenyl-beta-d-cellobiose. A comparison of the recombinant S. cerevisiae enzyme with the native C. fimi enzyme showed the yeast version to have an identical K(m) and pH optimum but to be more thermostable.

Single-walled carbon nanotube composite inks for printed gas sensors: enhanced detection of NO2, NH3, EtOH and acetone

SWNT–metal oxide composites for improvement of response and selectivity in gas sensors.

Formation of Methane Hydrate in the Presence of Natural and Synthetic Nanoparticles

Natural gas hydrates occur widely on the ocean-bed and in permafrost regions, and have potential as an untapped energy resource. Their formation and growth, however, poses major problems for the energy sector due to their tendency to block oil and gas pipelines, whereas their melting is viewed as a potential contributor to climate change. Although recent advances have been made in understanding bulk methane hydrate formation, the effect of impurity particles, which are always present under conditions relevant to industry and the environment, remains an open question. Here we present results from neutron scattering experiments and molecular dynamics simulations that show that the formation of methane hydrate is insensitive to the addition of a wide range of impurity particles. Our analysis shows that this is due to the different chemical natures of methane and water, with methane generally excluded from the volume surrounding the nanoparticles. This has important consequences for our understanding of the mechanism of hydrate nucleation and the design of new inhibitor molecules.

Formation of giant solvation shells around fulleride anions in liquid ammonia

Here, we measure the solvation structure of fulleride C605- anions in potassium ammonia solution using neutron diffraction. We find a very strong solvation structure consisting of two shells of ammonia densely packed around the anion. The system's structure is driven by the propensity of ammonia molecules to direct one of their hydrogen bonds to the center of the anion while retaining axial hydrogen bonding within the shells. This permits high concentrations of solvent separated fulleride anions.