Recent advances of modification effect in Co3O4-based catalyst towards highly efficient photocatalysis

Tricobalt tetroxide (Co3O4) has been developed as a promising photocatalyst material for various applications. Several reports have been published on the self-modification of Co3O4 to achieve optimal photocatalytic performance. The pristine Co3O4 alone is inadequate for photocatalysis due to the rapid recombination process of photogenerated (PG) charge carriers. The modification of Co3O4 can be extended through the introduction of doping elements, incorporation of supporting materials, surface functionalization, metal loading, and combination with other photocatalysts. The addition of doping elements and support materials may enhance the photocatalysis process, although these modifications have a slight effect on decreasing the recombination process of PG charge carriers. On the other hand, combining Co3O4 with other semiconductors results in a different PG charge carrier mechanism, leading to a decrease in the recombination process and an increase in photocatalytic activity. Therefore, this work discusses recent modifications of Co3O4 and their effects on its photocatalytic performance. Additionally, the modification effects, such as enhanced surface area, generation of oxygen vacancies, tuning the band gap, and formation of heterojunctions, are reviewed to demonstrate the feasibility of separating PG charge carriers. Finally, the formation and mechanism of these modification effects are also reviewed based on theoretical and experimental approaches to validate their formation and the transfer process of charge carriers.

Fine-tuning mesoporous silica properties by a dual-template ratio as TiO2 support for dye photodegradation booster

Titanium dioxide (TiO₂) has been integrated into the surface of mesoporous silica (SMG) synthesized via the hydrothermal approach and a dual template CTAB-Gelatin. XRD, nitrogen adsorption, FTIR, SEM-EDX, and UV-Vis DR spectroscopy were performed to evaluate a 1 wt% TiO₂/SMG material. After titania incorporation, the addition of gelatin during the synthesis of SMG increases the pore volume to 0.76 cc/g. The expansion of the silica pores is caused by the development of TiO₂ crystal grains on the mesoporous silica-gelatin. An increase in the gelatin-CTAB to mesoporous silica weight ratio modifies the surface area, pore size, and particle size without compromising the meso-structure. In this research, the TiO₂/SMG composite demonstrated much greater photodegradability for methylene blue (MB) than the TiO₂/mesoporous silica sample without gelatin. The experimental results indicate that the photocatalytic activity of methylene blue from SMG titania/silica samples is reliant on the adsorption ability of the composite and the photocatalytic activity of titania, with optimal activity from samples with the highest surface area and pore volume, which directly increase the Ti: Si ratio and decrease the photodegradability of the composite when the ratio is too high or too low.

Optimization of hierarchical ZSM-5 structure from kaolin as catalysts for biofuel production

Optimization of hierarchical ZSM-5 structure by variation of the first hydrothermal step at different times provides insight into the evolution of micro/mesopores and its effect as a catalyst for deoxygenation reaction. The degree of tetrapropylammonium hydroxide (TPAOH) incorporation as an MFI structure directing agent and N-cetyl-N,N,N-trimethylammonium bromide (CTAB) as a mesoporogen was monitored to understand the effect towards pore formation. Amorphous aluminosilicate without the framework-bound TPAOH achieved within 1.5 h of hydrothermal treatment provides flexibility to incorporate CTAB for forming well-defined mesoporous structures. Further incorporation of TPAOH within the restrained ZSM-5 framework reduces the flexibility of aluminosilicate gel to interact with CTAB to form mesopores. The optimized hierarchical ZSM-5 was obtained by allowing hydrothermal condensation at 3 h, in which the synergy between the readily formed ZSM-5 crystallites and the amorphous aluminosilicate generates the proximity between micropores and mesopores. A high acidity and micro/mesoporous synergy obtained after 3 h exhibit 71.6% diesel hydrocarbon selectivity because of the improved diffusion of reactant within the hierarchical structures.

Hydrothermal effect of gunningite use Pluronic F127-GELATIN as template and the ibuprofen adsorption performance

The gunningite has been successfully synthesized using Pluronic F127 and gelatin as template via hydrothermal at 100-200 °C for 12-48 h. By scanning electron microscopy, nitrogen adsorption-desorption, and X-ray diffraction, changes in structure, pore size, and morphology due to ibuprofen adsorption were investigated in gunningite. Various hydrothermal (temperature and time) parameters had an influence on the percentage elimination (%) of ibuprofens. Gunningite's specific surface area intensifies from 14.60 to 24.03 m²/g as the longer hydrothermal time. In batch adsorption studies, the resulting sample was conducted to isotherm and kinetic analysis to evaluate the distribution of ibuprofen between the liquid and solid phases. Pseudo-first-order kinetics with an adsorption capacity range of 27-34.5 mg g^-1 were the best fit for the observed data. Consequently, gunningite may be considered a viable adsorbent for the large-scale treatment of water contaminated with ibuprofen and related anti-inflammatory medicines.

Controlling the Size and Porosity of Sodalite Nanoparticles from Indonesian Kaolin for Pb2+ Removal

Mesoporous sodalite nanoparticles were directly synthesized from Indonesian kaolin with the addition of CTABr as a mesopore template. The studies highlighted the importance of aging time (3–12 h) and temperature (50–80 °C) on increasing surface area and mesoporosity of sodalite. Indonesian kaolin was used without pre-treatment and transformed to sodalite following the initial molar composition of 10 Na₂O: 2 SiO₂: Al₂O₃: 128 H₂O. Characterization data revealed the formation of high surface area sodalite with mesoporosity at increasing aging temperatures and times. The presence of CTABr as templates produced sodalites nanoparticles with smaller aggregates than the non-template sodalite. The sodalite sample obtained at 80 °C of crystallization temperature for 9 h (S80H9) displayed the highest mesopore volume (0.07612 cm³/g) and the highest adsorption capacity of Pb²⁺ (212.24 mg/g). Pb²⁺ was suggested to adsorb via ion exchange with the Na⁺ counter cation and physical adsorption.

Enhanced CO2 methanation at mild temperature on Ni/zeolite from kaolin: effect of metal-support interface

Catalytic CO₂ hydrogenation to CH₄ offers a viable route for CO₂ conversion into carbon feedstock. The research aimed to enhance CO₂ conversion at low temperature and to increase the stability of Ni catalysts using zeolite as a support. NaZSM-5 (MFI), NaA (LTA), NaY (FAU), and NaBEA (BEA) synthesized from kaolin were impregnated with 15% Ni nanoparticles in order to elucidate the effect of surface area, porosity and basicity of the zeolite in increasing Ni activity at mild temperature of ∼200 °C. A highly dispersed Ni catalyst was produced on high surface area NaY meanwhile the mesoporosity of ZSM-5 has no significant effect in improving Ni dispersion. However, the important role of zeolite mesoporosity was observed on the stability of the catalyst. Premature deactivation of Ni/NaA within 10 h was due to the relatively small micropore size that restricted the CO₂ diffusion, meanwhile Ni/NaZSM-5 with a large mesopore size exhibited catalytic stability for 40 h of reaction. Zeolite NaY enhanced Ni activity at 200 °C to give 21% conversion with 100% CH₄ selectivity. In situ FTIR analysis showed the formation of hydrogen carbonate species and formate intermediates at low temperatures on Ni/NaY, which implied the efficiency of electron transfer from the basic sites of NaY during CO₂ reduction. The combination of Ni/NaY interfacial interaction and NaY surface basicity promoted CO₂ methanation reaction at low temperature.

Different Na-zeolites as supports of Ni metal were successfully synthesized from kaolin-based material. Combination of interfacial interaction Ni-support and surface basicity promoted CO₂ methanation reaction at a low temperature of ∼200 °C.