The binding interface of cytochrome c and cytochrome c₁ in the bc₁ complex: rationalizing the role of key residues

The interaction of cytochrome c with ubiquinol-cytochrome c oxidoreductase (bc₁ complex) has been studied for >30 years, yet many aspects remain unclear or controversial. We report the first molecular dynamic simulations of the cyt c-bc₁ complex interaction. Contrary to the results of crystallographic studies, our results show that there are multiple dynamic hydrogen bonds and salt bridges in the cyt c-c₁ interface. These include most of the basic cyt c residues previously implicated in chemical modification studies. We suggest that the static nature of x-ray structures can obscure the quantitative significance of electrostatic interactions between highly mobile residues. This provides a clear resolution of the discrepancy between the structural data and functional studies. It also suggests a general need to consider dynamic interactions of charged residues in protein-protein interfaces. In addition, a novel structural change in cyt c is reported, involving residues 21-25, which may be responsible for cyt c destabilization upon binding. We also propose a mechanism of interaction between cyt c₁ monomers responsible for limiting the binding of cyt c to only one molecule per bc₁ dimer by altering the affinity of the cytochrome c binding site on the second cyt c₁ monomer.

Detection of a charge-separated catalyst precursor state in a linked photosensitizer-catalyst assembly

We have designed two new supramolecular assemblies based on Co(ii)-templated coordination of Ru(bpy)3(2+) (bpy = 2,2'-bipyridyl) analogues as photosensitizers and electron donors to a cobaloxime macrocycle, which are of interest as proton reduction catalysts. The self-assembled photocatalyst precursors were structurally characterized by Co K-edge X-ray absorption spectroscopy and solution-phase X-ray scattering. Visible light excitation of one of the assemblies has yielded instantaneous electron transfer and charge separation to form a transient Co(i) state which persists for 26 ps. The development of a linked photosensitizer-cobaloxime architecture supporting efficient Co(i) charge transfer is significant since it is mechanistically critical as the first photo-induced electron transfer step for hydrogen production, and has not been detected in previous photosensitizer-cobaloxime linked dyad assemblies. X-band EPR spectroscopy has revealed that the Co(ii) centres of both assemblies are high spin, in contrast to most previously described cobaloximes, and likely plays an important role in facilitating photoinduced charge separation. Based on the results obtained from ultrafast and nanosecond transient absorption optical spectroscopies, we propose that charge recombination occurs through multiple ligand states present within the photosensitizer modules. The studies presented here will enhance our understanding of supramolecular photocatalyst assembly and direct new designs for artificial photosynthesis.

Evidence for interaction between the triheme cytochrome PpcA from Geobacter sulfurreducens and anthrahydroquinone-2,6-disulfonate, an analog of the redox active components of humic substances

The bacterium Geobacter sulfurreducens displays an extraordinary respiratory versatility underpinning the diversity of electron donors and acceptors that can be used to sustain anaerobic growth. Remarkably, G. sulfurreducens can also use as electron donors the reduced forms of some acceptors, such as the humic substance analog anthraquinone-2,6-disulfonate (AQDS), a feature that confers environmentally competitive advantages to the organism. Using UV-visible and stopped-flow kinetic measurements we demonstrate that there is electron exchange between the triheme cytochrome PpcA from Gs and AQDS. 2D-(1)H-(15)N HSQC NMR spectra were recorded for (15)N-enriched PpcA samples, in the absence and presence of AQDS. Chemical shift perturbation measurements, at increasing concentration of AQDS, were used to probe the interaction region and to measure the binding affinity of the PpcA-AQDS complex. The perturbations on the NMR signals corresponding to the PpcA backbone NH and heme substituents showed that the region around heme IV interacts with AQDS through the formation of a complex with a definite life time in the NMR time scale. The comparison of the NMR data obtained for PpcA in the presence and absence of AQDS showed that the interaction is reversible. Overall, this study provides for the first time a clear illustration of the formation of an electron transfer complex between AQDS and a G. sulfurreducens triheme cytochrome, shedding light on the electron transfer pathways underlying the microbial oxidation of humics.

Multimerization of solution-state proteins by tetrakis(4-sulfonatophenyl)porphyrin

Surface binding and interactions of anionic porphyins bound to cationic proteins have been studied for nearly three decades and are relevant as models for protein surface molecular recognition and photoinitiated electron transfer. However, interpretation of data in nearly all reports explicitly or implicitly assumed interaction of porphyrin with monodisperse proteins in solutions. In this report, using small-angle X-ray scattering with solution phase samples, we demonstrate that horse heart cytochrome (cyt) c, triheme cytochrome c7 PpcA from Geobacter sulfurreducens, and hen egg lysozyme multimerize in the presence of zinc tetrakis(4-sulfonatophenyl)porphyrin (ZnTPPS). Multimerization of cyt c showed a pH dependence with a stronger apparent binding affinity under alkaline conditions and was weakened in the presence of a high salt concentration. Ferric-cyt c formed complexes larger than those formed by ferro-cyt c. Free base TPPS and FeTPPS facilitated formation of complexes larger than those of ZnTPPS. No increase in protein aggregation state for cationic proteins was observed in the presence of cationic porphyrins. All-atom molecular dynamics simulations of cyt c and PpcA with free base TPPS corroborated X-ray scattering results and revealed a mechanism by which the tetrasubstituted charged porphyrins serve as bridging ligands nucleating multimerization of the complementarily charged protein. The final aggregation products suggest that multimerization involves a combination of electrostatic and hydrophobic interactions. The results demonstrate an overlooked complexity in the design of multifunctional ligands for protein surface recognition.

Bidirectional Photoinduced Electron Transfer in Ruthenium(II)-Tris-bipyridyl-Modified PpcA, a Multi-heme c-Type Cytochrome from Geobacter sulfurreducens

PpcA, a tri-heme cytochrome c7 from Geobacter sulfurreducens, was investigated as a model for photosensitizer-initiated electron transfer within a multi-heme "molecular wire" protein architecture. Escherichia coli expression of PpcA was found to be tolerant of cysteine site-directed mutagenesis, demonstrated by the successful expression of natively folded proteins bearing cysteine mutations at a series of sites selected to vary characteristically with respect to the three -CXXCH- heme binding domains. The introduced cysteines readily reacted with Ru(II)-(2,2'-bpy)2(4-bromomethyl-4'-methyl-2,2'-bipyridine) to form covalently linked constructs that support both photo-oxidative and photo-reductive quenching of the photosensitizer excited state, depending upon the initial heme redox state. Excited-state electron-transfer times were found to vary from 6 × 10(-12) to 4 × 10(-8) s, correlated with the distance and pathways for electron transfer. The fastest rate is more than 10(3)-fold faster than previously reported for photosensitizer-redox protein constructs using amino acid residue linking. Clear evidence for inter-heme electron transfer within the multi-heme protein is not detected within the lifetimes of the charge-separated states. These results demonstrate an opportunity to develop multi-heme c-cytochromes for investigation of electron transfer in protein "molecular wires" and to serve as frameworks for metalloprotein designs that support multiple-electron-transfer redox chemistry.

A strong steric hindrance effect on ground state, excited state, and charge separated state properties of a Cu(I)-diimine complex captured by X-ray transient absorption spectroscopy

Photophysical and structural properties of a Cu(I) diimine complex with very strong steric hindrance, [Cu(I)(dppS)2](+) (dppS = 2,9-diphenyl-1,10-phenanthroline disulfonic acid disodium salt), are investigated by optical and X-ray transient absorption (OTA and XTA) spectroscopy. The bulky phenylsulfonic acid groups at 2,9 positions of phenanthroline ligands force the ground state and the metal-to-ligand charge-transfer (MLCT) excited state to adopt a flattened pseudo-tetrahedral coordination geometry in which the solvent access to the copper center is completely blocked. We analyzed the MLCT state dynamics and structures as well as those of the charge separated state resulting from the interfacial electron injection from the MLCT state to TiO2 nanoparticles (NPs). The OTA results show the absence of the sub-picosecond component previously assigned as the time constant for flattening, while the two observed time constants are assigned to a relatively slow intersystem crossing (ISC) rate (∼13.8 ps) and a decay rate (100 ns) of the [Cu(I)(dppS)2](+) MLCT state in water. These results correlate well with the XTA studies that resolved a flattened tetrahedral Cu(i) coordination geometry in the ground state. Probing the (3)MLCT state structure with XTA establishes that the (3)MLCT state has the same oxidation state as the copper center in [Cu(II)(dppS)2](2+) and the Cu-N distance is reduced by 0.06 Å compared to that of the ground state, accompanied by a rotation of phenyl rings located at 2,9 positions of phenanthroline. The structural dynamics of the photoinduced charge transfer process in the [Cu(I)(dppS)2](+)/TiO2 hybrid is also investigated, which suggests a more restricted environment for the complex upon binding to TiO2 NPs. Moreover, the Cu-N bond length of the oxidized state of [Cu(I)(dppS)2](+) after electron injection to TiO2 NPs shortens by 0.05 Å compared to that in the ground state. The interpretation of these observed structural changes associated with excited and charge separated states will be discussed. These results not only set an example for applying XTA in capturing the intermediate structure of metal complex/semiconductor NP hybrids but also provide guidance for designing efficient Cu(I) diimine complexes with optimized structures for application in solar-to-electricity conversion.

Somatic uniparental disomy mitigates the most damaging EFL1 allele combination in Shwachman-Diamond syndrome

Shwachman-Diamond syndrome (SDS; OMIM #260400) is caused by variants in SBDS (Shwachman-Bodian-Diamond syndrome gene), which encodes a protein that plays an important role in ribosome assembly. Recent reports suggest that recessive variants in EFL1 are also responsible for SDS. However, the precise genetic mechanism that leads to EFL1-induced SDS remains incompletely understood. Here we present 3 unrelated Korean SDS patients who carry biallelic pathogenic variants in EFL1 with biased allele frequencies, resulting from a bone marrow-specific somatic uniparental disomy in chromosome 15. The recombination events generated cells that were homozygous for the relatively milder variant, allowing for the evasion of catastrophic physiologic consequences. However, the milder EFL1 variant was still solely able to impair 80S ribosome assembly and induce SDS features in cell line and animal models. The loss of EFL1 resulted in a pronounced inhibition of terminal oligopyrimidine element-containing ribosomal protein transcript 80S assembly. Therefore, we propose a more accurate pathogenesis mechanism of EFL1 dysfunction that eventually leads to aberrant translational control and ribosomopathy.

Binding of imidazole to the heme of cytochrome c1 and inhibition of the bc1 complex from Rhodobacter sphaeroides: I. Equilibrium and modeling studies

We have used imidazole (Im) and N-methylimidazole (MeIm) as probes of the heme-binding cavity of membrane-bound cytochrome (cyt) c(1) in detergent-solubilized bc(1) complex from Rhodobacter sphaeroides. Imidazole binding to cyt c(1) substantially lowers the midpoint potential of the heme and fully inhibits bc(1) complex activity. Temperature dependences showed that binding of Im (K(d) approximately 330 microM, 25 degrees C, pH 8) is enthalpically driven (DeltaH(0) = -56 kJ/mol, DeltaS(0) = -121 J/mol/K), whereas binding of MeIm is 30 times weaker (K(d) approximately 9.3 mM) and is entropically driven (DeltaH(0) = 47 kJ/mol, DeltaS(0)(o) = 197 J/mol/K). The large enthalpic and entropic contributions suggest significant structural and solvation changes in cyt c(1) triggered by ligand binding. Comparison of these results with those obtained previously for soluble cyts c and c(2) suggested that Im binding to cyt c(1) is assisted by formation of hydrogen bonds within the heme cleft. This was strongly supported by molecular dynamics simulations of Im adducts of cyts c, c(2), and c(1), which showed hydrogen bonds formed between the N(delta)H of Im and the cyt c(1) protein, or with a water molecule sequestered with the ligand in the heme cleft.

Entropy-Induced Multivalley Band Structures Improve Thermoelectric Performance in p-Cu7P(SxSe1-x)6 Argyrodites

Searching for novel low-cost and eco-friendly materials for energy conversion is a good way to provide widespread utilization of thermoelectric technologies. Herein, we report the thermal behavior, phase equilibria data, and thermoelectric properties for the promising argyrodite-based Cu₇P(S_xSe_1-x)₆ thermoelectrics. Alloying of Cu₇PSe₆ with Cu₇PS₆ provides a continuous solid solution over the whole compositional range, as shown in the proposed phase diagram for the Cu₇PS₆-Cu₇PSe₆ system. As a member of liquid-like materials, the investigated Cu₇P(S_xSe_1-x)₆ solid solutions possess a dramatically low lattice thermal conductivity, as low as ∼0.2-0.3 W m^-1 K^-1, over the entire temperature range. Engineering the configurational entropy of the material by introducing more elements stabilizes the thermoelectrically beneficial high-symmetry γ-phase and promotes the multivalley electronic structure of the valence band. As a result, a remarkable improvement of the Seebeck coefficient and a reduction of electrical resistivity were observed for the investigated alloys. The combined effect of the extremely low lattice thermal conductivity and enhanced power factor leads to the significant enhancement of the thermoelectric figure of merit ZT up to ∼0.75 at 673 K for the Cu₇P(S_xSe_1-x)₆ (x = 0.5) sample with the highest configurational entropy, which is around twice higher compared with the pure selenide and almost four times higher than sulfide. This work not only demonstrates the large potential of Cu₇P(S_xSe_1-x)₆ materials for energy conversion but also promotes sulfide argyrodites as earth-abundant and environmentally friendly materials for energy conversion.

Oxyanion induced variations in domain structure for amorphous cobalt oxide oxygen evolving catalysts, resolved by X-ray pair distribution function analysis

Amorphous thin film oxygen evolving catalysts, OECs, of first-row transition metals show promise to serve as self-assembling photoanode materials in solar-driven, photoelectrochemical `artificial leaf' devices. This report demonstrates the ability to use high-energy X-ray scattering and atomic pair distribution function analysis, PDF, to resolve structure in amorphous metal oxide catalyst films. The analysis is applied here to resolve domain structure differences induced by oxyanion substitution during the electrochemical assembly of amorphous cobalt oxide catalyst films, Co-OEC. PDF patterns for Co-OEC films formed using phosphate, Pi, methylphosphate, MPi, and borate, Bi, electrolyte buffers show that the resulting domains vary in size following the sequence Pi < MPi < Bi. The increases in domain size for CoMPi and CoBi were found to be correlated with increases in the contributions from bilayer and trilayer stacked domains having structures intermediate between those of the LiCoOO and CoO(OH) mineral forms. The lattice structures and offset stacking of adjacent layers in the partially stacked CoMPi and CoBi domains were best matched to those in the LiCoOO layered structure. The results demonstrate the ability of PDF analysis to elucidate features of domain size, structure, defect content and mesoscale organization for amorphous metal oxide catalysts that are not readily accessed by other X-ray techniques. PDF structure analysis is shown to provide a way to characterize domain structures in different forms of amorphous oxide catalysts, and hence provide an opportunity to investigate correlations between domain structure and catalytic activity.

Binding of imidazole to the heme of cytochrome c1 and inhibition of the bc1 complex from Rhodobacter sphaeroides: II. Kinetics and mechanism of binding

The kinetics of imidazole (Im) and N-methylimidazole (MeIm) binding to oxidized cytochrome (cyt) c(1) of detergent-solubilized bc(1) complex from Rhodobacter sphaeroides are described. The rate of formation of the cyt c(1)-Im complex exhibited three separated regions of dependence on the concentration of imidazole: (i) below 8 mM Im, the rate increased with concentration in a parabolic manner; (ii) above 20 mM, the rate leveled off, indicating a rate-limiting conformational step with lifetime approximately 1 s; and (iii) at Im concentrations above 100 mM, the rate substantially increased again, also parabolically. In contrast, binding of MeIm followed a simple hyperbolic concentration dependence. The temperature dependences of the binding and release kinetics of Im and MeIm were also measured and revealed very large activation parameters for all reactions. The complex concentration dependence of the Im binding rate is not consistent with the popular model for soluble c-type cytochromes in which exogenous ligand binding is preceded by spontaneous opening of the heme cleft, which becomes rate-limiting at high ligand concentrations. Instead, binding of ligand to the heme is explained by a model in which an initial and superficial binding facilitates access to the heme by disruption of hydrogen-bonded structures in the heme domain. For imidazole, two separate pathways of heme access are indicated by the distinct kinetics at low and high concentration. The structural basis for ligand entry to the heme cleft is discussed.

Characterization of the structure and catalytic activity of Legionella pneumophila VipF

The pathogenic bacteria Legionella pneumophila is known to cause Legionnaires' Disease, a severe pneumonia that can be fatal to immunocompromised individuals and the elderly. Shohdy et al. identified the L. pneumophila vacuole sorting inhibitory protein VipF as a putative N-acetyltransferase based on sequence homology. We have characterized the basic structural and functional properties of VipF to confirm this original functional assignment. Sequence conservation analysis indicates two putative CoA-binding regions within VipF. Homology modeling and small angle X-ray scattering suggest a monomeric, dual-domain structure joined by a flexible linker. Each domain contains the characteristic beta-splay motif found in many acetyltransferases, suggesting that VipF may contain two active sites. Docking experiments suggest reasonable acetyl-CoA binding locations within each beta-splay motif. Broad substrate screening indicated that VipF is capable of acetylating chloramphenicol and both domains are catalytically active. Given that chloramphenicol is not known to be N-acetylated, this is a surprising finding suggesting that VipF is capable of O-acetyltransferase activity. Proteins 2016; 84:1422-1430. © 2016 Wiley Periodicals, Inc.

Examination of abiotic cofactor assembly in photosynthetic biomimetics: site-specific stereoselectivity in the conjugation of a ruthenium(II) tris(bipyridine) photosensitizer to a multi-heme protein

To understand design principles for assembling photosynthetic biohybrids that incorporate precisely-controlled sites for electron injection into redox enzyme cofactor arrays, we investigated the influence of chirality in assembly of the photosensitizer ruthenium(II)bis(2,2'-bipyridine)(4-bromomethyl-4'-methyl-2,2'-bipyridine), Ru(bpy)2(Br-bpy), when covalently conjugated to cysteine residues introduced by site-directed mutagenesis in the triheme periplasmic cytochrome A (PpcA) as a model biohybrid system. For two investigated conjugates that show ultrafast electron transfer, A23C-Ru and K29C-Ru, analysis by circular dichroism spectroscopy, CD, demonstrated site-specific chiral discrimination as a factor emerging from the close association between [Ru(bpy)3]2+ and heme cofactors. CD analysis showed the A23C-Ru and K29C-Ru conjugates to have distinct, but opposite, stereoselectivity for the Λ and Δ-Ru(bpy)2(Br-bpy) enantiomers, with enantiomeric excesses of 33.1% and 65.6%, respectively. In contrast, Ru(bpy)2(Br-bpy) conjugation to a protein site with high flexibility, represented by the E39C-Ru construct, exhibited a nearly negligible chiral selectivity, measured by an enantiomeric excess of 4.2% for the Λ enantiomer. Molecular dynamics simulations showed that site-specific stereoselectivity reflects steric constraints at the conjugating sites and that a high degree of chiral selectivity correlates to reduced structural disorder for [Ru(bpy)3]2+ in the linked assembly. This work identifies chiral discrimination as means to achieve site-specific, precise geometric positioning of introduced photosensitizers relative to the heme cofactors in manner that mimics the tuning of cofactors in photosynthesis.

All-atom molecular dynamics simulations reveal significant differences in interaction between antimycin and conserved amino acid residues in bovine and bacterial bc1 complexes

Antimycin A is the most frequently used specific and powerful inhibitor of the mitochondrial respiratory chain. We used all-atom molecular dynamics (MD) simulations to study the dynamic aspects of the interaction of antimycin A with the Q(i) site of the bacterial and bovine bc(1) complexes embedded in a membrane. The MD simulations revealed considerable conformational flexibility of antimycin and significant mobility of antimycin, as a whole, inside the Q(i) pocket. We conclude that many of the differences in antimycin binding observed in high-resolution x-ray structures may have a dynamic origin and result from fluctuations of protein and antimycin between multiple conformational states of similar energy separated by low activation barriers, as well as from the mobility of antimycin within the Q(i) pocket. The MD simulations also revealed a significant difference in interaction between antimycin and conserved amino acid residues in bovine and bacterial bc(1) complexes. The strong hydrogen bond between antimycin and conserved Asp-228 (bovine numeration) was observed to be frequently broken in the bacterial bc(1) complex and only rarely in the bovine bc(1) complex. In addition, the distances between antimycin and conserved His-201 and Lys-227 were consistently larger in the bacterial bc(1) complex. The observed differences could be responsible for a weaker interaction of antimycin with the bacterial bc(1) complex.

Detection and quantification of transition metal leaching in metal affinity chromatography with hydroxynaphthol blue

The widespread use of immobilized metal-affinity chromatography (IMAC) for fast and efficient purification of recombinant proteins has brought potentially toxic transition elements into common laboratory usage. However, there are few studies on the leaching of metal from the affinity resin, such as nickel-nitrilotriacetic acid (Ni-NTA), with possible deleterious impact on the biological activity. This is of particular importance when reducing or chelating eluants stronger than imidazole are used. We present a detailed study of hydroxynaphthol blue (HNB) as an indicator of several divalent metal cations, but with emphasis on Ni²⁺, clarifying and correcting many errors and ambiguities in the older literature on this dye compound. The assay is simple and sensitive and many metals, notably Ni²⁺, Zn²⁺, Cu²⁺, Pb²⁺, Fe²⁺, Co²⁺, and Al³⁺, can be readily detected and quantified at concentrations down to 15-50 nM (1-5 ppb) at neutral pH and in most commonly used buffers using spectroscopic equipment available in typical biochemistry research labs. Using this method, we show that significant amounts of Ni²⁺ (up to 20 mM) are co-purified with a target protein (cytochrome bc₁ complex) when histidine is used to elute from Ni-NTA resin.

Obscurin is a semi-flexible molecule in solution

Obscurin, a giant modular cytoskeletal protein, is comprised mostly of tandem immunoglobulin-like (Ig-like) domains. This architecture allows obscurin to connect distal targets within the cell. The linkers connecting the Ig domains are usually short (3-4 residues). The physical effect arising from these short linkers is not known; such linkers may lead to a stiff elongated molecule or, conversely, may lead to a more compact and dynamic structure. In an effort to better understand how linkers affect obscurin flexibility, and to better understand the physical underpinnings of this flexibility, here we study the structure and dynamics of four representative sets of dual obscurin Ig domains using experimental and computational techniques. We find in all cases tested that tandem obscurin Ig domains interact at the poles of each domain and tend to stay relatively extended in solution. NMR, SAXS, and MD simulations reveal that while tandem domains are elongated, they also bend and flex significantly. By applying this behavior to a simplified model, it becomes apparent obscurin can link targets more than 200 nm away. However, as targets get further apart, obscurin begins acting as a spring and requires progressively more energy to further elongate.

Quantification of Metal Leaching in Immobilized Metal Affinity Chromatography

Contamination of enzymes with metals leached from immobilized metal affinity chromatography (IMAC) columns poses a major concern for enzymologists, as many of the common di-and trivalent cations used in IMAC resins have an inhibitory effect on enzymes. However, the extent of metal leaching and the impact of various eluting and reducing reagents are poorly understood in large part due to the absence of simple and practical transition metal quantification protocols that use equipment typically available in biochemistry labs. To address this problem, we have developed a protocol to quickly quantify the amount of metal contamination in samples prepared using IMAC as a purification step. The method uses hydroxynaphthol blue (HNB) as a colorimetric indicator for metal cation content in a sample solution and UV-Vis spectroscopy as a means to quantify the amount of metal present, into the nanomolar range, based on the change in the HNB spectrum at 647 nm. While metal content in a solution has historically been determined using atomic absorption spectroscopy or inductively coupled plasma techniques, these methods require specialized equipment and training outside the scope of a typical biochemistry laboratory. The method proposed here provides a simple and fast way for biochemists to determine the metal content of samples using existing equipment and knowledge without sacrificing accuracy.