Submicronic Laue diffraction to determine in-depth strain in very closely matched complex HgCdTe/CdZnTe heterostructures with a 10-5 resolution

Cross-sectional submicronic Laue diffraction has been successfully applied to HgCdTe/CdZnTe heterostructures to provide accurate strain profiles from substrate to surface. Combined with chemical-sensitive techniques, this approach allows correlation of lattice-mismatch, interface compositional gradient and strain while isolating specific layer contributions which would otherwise be averaged using conventional X-ray diffraction. The submicronic spatial resolution allowed by the synchrotron white beam size is particularly suited to complex infrared detector designed structures such as dual-color detectors. The extreme strain resolution of 10^-5 required for the very low lattice-mismatch system HgCdTe/CdZnTe is demonstrated.

Highly Efficient Spin-to-Charge Current Conversion in Strained HgTe Surface States Protected by a HgCdTe Layer

We report the observation of spin-to-charge current conversion in strained mercury telluride at room temperature, using spin pumping experiments. We show that a HgCdTe barrier can be used to protect the HgTe from direct contact with the ferromagnet, leading to very high conversion rates, with inverse Edelstein lengths up to 2.0±0.5  nm. The influence of the HgTe layer thickness on the conversion efficiency is found to differ strongly from what is expected in spin Hall effect systems. These measurements, associated with the temperature dependence of the resistivity, suggest that these high conversion rates are due to the spin momentum locking property of HgTe surface states.

Metal homeostasis disruption and mitochondrial dysfunction in hepatocytes exposed to sub-toxic doses of zinc oxide nanoparticles

Increased production and use of zinc oxide nanoparticles (ZnO-NPs) in consumer products has prompted the scientific community to investigate their potential toxicity, and understand their impact on the environment and organisms. Molecular mechanisms involved in ZnO-NP toxicity are still under debate and focus essentially on high dose expositions. In our study, we chose to evaluate the effect of sub-toxic doses of ZnO-NPs on human hepatocytes (HepG2) with a focus on metal homeostasis and redox balance disruptions. We showed massive dissolution of ZnO-NPs outside the cell, transport and accumulation of zinc ions inside the cell but no evidence of nanoparticle entry, even when analysed by high resolution TEM microscopy coupled with EDX. Gene expression analysis highlighted zinc homeostasis disruptions as shown by metallothionein 1X and zinc transporter 1 and 2 (ZnT1, ZnT2) over-expression. Major oxidative stress response genes, such as superoxide dismutase 1, 2 and catalase were not induced. Phase 2 enzymes in term of antioxidant response, such as heme oxygenase 1 (HMOX1) and the regulating subunit of the glutamate-cysteine ligase (GCLM) were slightly upregulated, but these observations may be linked solely to metal homeostasis disruptions, as these actors are involved in both metal and ROS responses. Finally, we observed abnormal mitochondria morphologies and autophagy vesicles in response to ZnO-NPs, indicating a potential role of mitochondria in storing and protecting cells from zinc excess but ultimately causing cell death at higher doses.

Visualization, quantification and coordination of Ag+ ions released from silver nanoparticles in hepatocytes

Silver nanoparticles (AgNPs) can enter eukaryotic cells and exert toxic effects, most probably as a consequence of the release of Ag⁺ ions. Due to the elusive nature of Ag⁺ ionic species, quantitative information concerning AgNP intracellular dissolution is missing. By using a synchrotron nanoprobe, silver is visualized and quantified in hepatocytes (HepG2) exposed to AgNPs; the synergistic use of electron microscopy allows for the discrimination between nanoparticular and ionic forms of silver within a single cell. AgNPs are located in endocytosis vesicles, while the visualized Ag⁺ ions diffuse in the cell. The averaged NP dissolution rates, measured by X-ray absorption spectroscopy, highlight the faster dissolution of citrate-coated AgNPs with respect to the less toxic PVP-coated AgNPs; these results are confirmed at the single-cell level. The released Ag⁺ ions recombine with thiol-bearing biomolecules: the Ag-S distances measured in cellulo, and the quantitative evaluation of gene expression, provide independent evidence of the involvement of glutathione and metallothioneins in Ag⁺ binding. The combined use of cutting-edge imaging techniques, atomic spectroscopy and molecular biology brings insight into the fate of AgNPs in hepatocytes, and more generally into the physicochemical transformations of metallic nanoparticles in biological environments and the resulting disruption of metal homeostasis.

Compared growth mechanisms of Zn-polar ZnO nanowires on O-polar ZnO and on sapphire

Controlling the growth of zinc oxide nanowires is necessary to optimize the performance of nanowire-based devices such as photovoltaic solar cells, nano-generators, or light-emitting diodes. With this in mind, we investigate the nucleation and growth mechanisms of ZnO nanowires grown by metalorganic vapor phase epitaxy either on O-polar ZnO or on sapphire substrates. Whatever the substrate, ZnO nanowires are Zn-polar, as demonstrated by convergent beam electron diffraction. For growth on O-polar ZnO substrate, the nanowires are found to sit on O-polar pyramids. As growth proceeds, the inversion domain boundary moves up in order to remain at the top of the O-polar pyramids. For growth on sapphire substrates, the nanowires may also originate from the sapphire/ZnO interface. The presence of atomic steps and the non-polar character of sapphire could be the cause of the Zn-polar crystal nucleation on sapphire, whereas it is proposed that the segregation of aluminum impurities could account for the nucleation of inverted domains for growth on O-polar ZnO.

Core-shell multi-quantum wells in ZnO/ZnMgO nanowires with high optical efficiency at room temperature

Nanowire-based light-emitting devices require multi-quantum well heterostructures with high room temperature optical efficiencies. We demonstrate that such efficiencies can be attained through the use of ZnO/Zn((1-x))Mg(x)O core-shell quantum well heterostructures grown by metal organic vapor phase epitaxy. Varying the barrier Mg concentration from x = 0.15 to 0.3 leads to the formation of misfit induced dislocations in the multi-quantum wells. Correlatively, temperature dependent photoluminescence reveals that the radial well luminescence intensity decreases much less rapidly with increasing temperature for the lower Mg concentration. Indeed, about 54% of the 10 K intensity is retained at room temperature with x = 0.15, against 1% with x = 0.30. These results open the way to the realization of high optical efficiency nanowire-based light-emitting diodes.

A history of scanning electron microscopy developments: Towards “wet-STEM” imaging

A recently developed imaging mode called "wet-STEM" and new developments in environmental scanning electron microscopy (ESEM) allows the observation of nano-objects suspended in a liquid phase, with a few manometers resolution and a good signal to noise ratio. The idea behind this technique is simply to perform STEM-in-SEM, that is SEM in transmission mode, in an environmental SEM. The purpose of the present contribution is to highlight the main advances that contributed to development of the wet-STEM technique. Although simple in principle, the wet-STEM imaging mode would have been limited before high brightness electron sources became available, and needed some progresses and improvements in ESEM. This new technique extends the scope of SEM as a high-resolution microscope, relatively cheap and widely available imaging tool, for a wider variety of samples.

Wet STEM: A new development in environmental SEM for imaging nano-objects included in a liquid phase

Environmental scanning electron microscopy (ESEM) enables wet samples to be observed without potentially damaging sample preparation through the use of partial water vapour pressure in the microscope specimen chamber. However, in the case of latices in colloidal state or microorganisms, samples are not only wet, but made of objects totally submerged in a liquid phase. In this case, under classical ESEM imaging conditions only the top surface of the liquid is imaged, with poor contrast, and possible drifting of objects. The present paper describes experiments using a powerful new Scanning Transmission Electron Microscopy (STEM) imaging system, that allows transmission observations of wet samples in an ESEM. A special device, designed to observe all sorts of objects submerged in a liquid under annular dark-field imaging conditions, is described. Specific features of the device enable to avoid drifting of floating objects which occurs in the case of a large amount of water, thus allowing slow-scan high-definition imaging of particles with a diameter down to few tens of nm. The large potential applications of this new technique are then illustrated, including the imaging of different nano-objects in water. The particular case of grafted latex particles is discussed, showing that it is possible to observe details on their surface when submerged in water. All the examples demonstrate that images acquired in wet STEM mode show particularly good resolution and contrast, without adding enhancing contrast objects, and without staining.

Crystallographic orientation assessment by electron backscattered diffraction

With an angular orientation accuracy of at least 1 , the ability of electron backscattered diffraction (EBSD) to determine and emphasise crystallographic orientation is illustrated. Using the abilities of specially developed software for computing Euler angles derived from the scanned specimen, misorientations are pointed out with acceptable flexibility and graphic output through crystallographic orientation maps or pole figures. This ability is displayed in the particular case of laser cladding of nickel-based superalloy, a process that combines the advantages of a near net-shape manufacturing and a close control of the solidification microstructure (E-LMF: epitaxial laser metal forming).