The Influence of Fine Surface Structures on the Osseo-integration of Implants

The availability of inert materials like dense, pure Al-2O3-ceramic or titanium allows the study of purely biomechanical influences of surface modulations or lacune on the osseo-integration of implants at different locations of the skeleton. The discovery of the «load-line-shadow» phenomenon in lacune of dental implants and the observation of the same effect in the grooves of hip sockets (Lindenhof type) indicate the general validity of the rules controlling the remodelling ability of bony tissue. Their application to the problems concerned with load transmission via surfaces which are mainly loaded by shear can contribute to achieve a well defined anchorage of implants.

Design und erste klinische Ergebnisse mit dem ZMR-Taper-Revisionsschaft

AIM

The purpose of this study was to survey and to evaluate the first clinical and radiological results with the cementless ZMR taper hip prosthesis.

METHOD

The modular distal-tapered stem was designed with a roughened titanium surface and sharp splines to achieve secure distal fixation and rotational stability. 90 ZMR taper hip prostheses were implanted between October 1999 and July 2002. Out of these, 4 interventions were primary and 86 were revision procedures. In 43 cases a complete hip prosthesis revision and in 43 cases a stem revision was necessary. The mean age of the 90 patients (42 males, 48 females) was 67.1 years. The mean follow-up period was 7.6 months (3 to 25 months).

RESULTS

The stem displayed an excellent distal fixation. The mean subsidence could be measured with 4.3 mm. Furthermore, most cases showed a particularly favourable remodelling of the proximal femoral bone stock. Complications associated with revision included intraoperatively 4 femur fractures, 3 femur fissures, 5 femur perforations, 2 trochanter fractures and postoperatively 19 dislocations, 5 superficial wound infections, 2 transient palsies, 1 pulmonary embolism, 1 stem rotation and 4 wound healing failures. Considering these complications 15 re-revisions were necessary and the ZMR taper hip prosthesis had to be exchanged in 3 cases.

CONCLUSION

On the one hand the ZMR taper hip prosthesis proved its value, particularly with regard to the stem modularity, the excellent distal fixation in conjunction with the possibility of partial body weight bearing and the rapid bone remodelling of the femur. On the other hand an increased number of postoperative complications and re-revisions occurred. Further long-term studies seem to be essential.

Safety and efficacy of unmodified whole blood vs. buffy coat-depleted red cell concentrates in autologous transfusion of elective orthopaedic surgery patients

Storing autologous blood as whole blood (WB) has been proposed for increasing the cost-effectiveness of preoperative autologous blood donation programmes. However, experimental data suggest that autologous leucocytes might lead to immunomodulation similar to the effect attributed to allogeneic leucocytes. In a retrospective analysis, the postoperative outcome of 120 patients undergoing elective orthopaedic surgery and having donated up to two units of autologous WB (AWB) was compared with that of a control group of 52 patients, whose autologous donation had been processed into buffy coat-depleted red cell concentrates (RCC). At least one autologous unit, but no allogeneic units, had been transfused in all analysed patients. Donation schemes were equally efficacious in both groups. There was no significant difference in postoperative infection rates between the two groups. Overall rates were 7.7% in the RCC group and 8.3% in the WB group. Surgical, thromboembolic and other recorded complications, length of postoperative hospital stay and days of the use of antibiotics were also not significantly different between the two groups. The results of this study suggest that transfusion of up to two units of unmodified AWB is as efficacious as the transfusion of autologous RCC and does not negatively influence the postoperative outcome in elective orthopaedic surgery.

The effect of Palamed G bone cement on early migration of tibial components in total knee arthroplasty

OBJECTIVE

Migration of the tibial component in total knee arthroplasty (TKA) is subject of many studies using roentgen stereophotogrammetric analysis (RSA). In previous studies of cemented and uncemented tibial components, high migration values were found. Improvements in cementing technique, prosthetic design and pre-coating techniques reduced these values as shown in more recent studies.

MATERIAL AND SUBJECTS

A total of 35 patients were initially included in the study and operated on between 12/1999 and 10/2000. All patients received a NexGen TKA cemented into the proximal tibia using Palamed G bone cement. The implants and the tibial metaphysis were marked with standard tantalum markers. Radiostereometric analysis was performed post-operatively and after 3, 6 and 12 months using a standard digital radiostereometric analysis. Functional parameters were assessed using the Knee Society Score (KSS) clinical rating system.

RESULTS

There were no complications and failures within the first year. After 1 year radiostereometric measurements of the translational parameters along and the rotational parameters around the x-, y- and z-axis revealed: X-Trans -0.19 mm, Y-Trans +0.02 mm, Z-Trans +0.08 mm, X-Rot +0.26 degrees, Y-Rot -0.35 degrees, Z-Rot +0.09 degrees. The maximum total point motion was +0.96 mm and the mean maximum subsidence was -0.23 mm. Except for anterior-posterior, medio-lateral stability and extension leg all endpoints of the KSS clinical rating system showed a significant improvement.

CONCLUSIONS

After 12 months, the use of Palamed G bone cement in total knee arthroplasty was demonstrated to be safe. Both the clinical and radiostereometric results were good and comparable to the results reported in other RSA studies in cemented total knee arthroplasty.

Elektrogesponnene Poly-L- Laktid-Nanofasern als resorbierbare Matrix für Tissue-Engineering / Electrospun Poly-l-lactide Nanofibres as Scaffolds for Tissue Engineering

Tissue engineering is a promising tool for treating structural and functional defects in bone and cartilage. To provide optimal conditions for three-dimensional cell growth the use of a scaffold is necessary. The aim of the study was to test the potential application of an electrospun poly (l-lactide)-nanostructured scaffold as a matrix for tissue engineering. Matrices were seeded with human osteosarcoma MG-63 cells and cultivated for 14 days. Cells showed a clear preference for growth along the nanofibres, and demonstrated no signs of degeneration or apoptosis. The fine structure of electrospun nanofibres makes them an ideal scaffold for tissue engineering, in particular for cartilage repair. They can be "doped" with growth factors, medications, etc., and are both biocompatible and biodegradable.

[Bone adaptation changes mechanical stress in the femur--a prospective two years follow up after Hüft-TEP implantation]

AIM

Periprosthetic adaptive bone remodeling after total hip arthroplasty (THA) has been frequently simulated in computer models, combining bone remodeling theory with finite element analysis. Unfortunately, there is still a lack of clinical validation data. The collection of prospective volumetric bone density data with a clinical computerized tomography study after THA was previously conducted. The objective of the study presented here is an additional evaluation of femoral strain.

METHOD

In a prospective clinical trial with 7 female patients after THA computerized tomography (CT) and finite element (FE) modeling was patient specifically combined immediately after surgery, as well as at three and 24 months postoperatively. Mechanical strain was expressed by strain energy density.

RESULTS

Corresponding to a bone density decrease, a decrease of the femoral strain energy density was observed during the two year follow-up after surgery (approximately 20 %). The predominant change occurred within the first three months and was found to be distally stronger than proximally.

CONCLUSION

As far as we are aware, this is the first combination of fully prospective 3D CT density data in vivo with patient-specific finite element modeling. The assessment of mechanical strain data during a follow-up trial should be a new approach for analyzing hip stems in clinical biomechanics. A future confirmative study based on a statistical case number calculation would increase the evidence of the results presented here.

A comparative clinical outcome evaluation of smooth (10-13 year results) versus rough surface finish (5-8 year results) in an otherwise identically designed cemented titanium alloy stem

BACKGROUND

We retrospectively compared the influence of surface finish with respect to the long-term durability of a cemented titanium alloy stem of the same design but different surface finish.

METHODS

From 1984 to 1994, the stem was made of a titanium-aluminum-vanadium alloy. A total of 201 patients with 220 smooth stems (mean follow-up 11 years and 4 months) out of 612 implanted between 1984 and 1987 and 319 patients with 343 rough stems (mean follow-up 5 years and 10 months) out of 812 implanted between 1991 and 1993 could be reviewed clinically and radiologically for comparison. The average age of the patients with the smooth stem was 58.1 years and of the patients with the rough stem, 62.2 years. In both groups, 35% of patients were male and 65% female.

RESULTS

The mean Merle d'Aubigné hip score increased from 10.5 to 16.0 points in the smooth stem group and from 11.0 to 16.9 points in the rough stem group. The distribution of radiolucent lines, according to the zones of Gruen, was similar in both groups. The smooth stem required revision in 18 cases after a mean follow-up of 11 years and 4 months and the rough stem in 30 cases after a mean follow-up of 5 years and 10 months. The survival analysis (Kaplan-Meier) revealed 95.4% survival after 13 years for the smooth femoral component and 76.7% survival after 8 years for the rough femoral component.

CONCLUSIONS

The implantation of titanium alloy stems with a rough surface finish cannot be recommended because of its high aseptic loosening rate.

[DRG based development of revenues in orthopaedic surgery. A comparison on the development of cost weights and average lengths of hospital stay in Germany (G-DRG V1.0) and in Australian teaching hospitals (AR-DRG 4.1)]

STUDY GOAL

In September 2002 the Federal Ministry of Health (BMG) has passed a decree in respect to the diagnosis related group system (G-DRG) for German hospitals (KFPV). From 2003 on the basis of this decree German hospitals were offered for the first time to use the G-DRG system optionally according to the " Section 17b Abs.4 of the Hospital Financing Law (Krankenhausfinanzierungsgesetz-KHG)". In addition the preliminary calculation data for the German DRG-System were published. The goal of this study was to compare the development of the cost weights and the average lengths of hospital stay in Australian teaching hospitals between 1998 and 2001 with the cost weights and average lengths of hospital stay in German hospitals according to the data published in the first German calculation (G-DRG V1.0).

METHODS

An analysis was performed using the publically accessible reports on the national hospital cost data collections from 1998 until 2001 as they were published by the Commonwealth Department of Health and Aged Care in Australia. These data were compared with the cost weight calculation and average lengths of hospital stay calculation of the Institute for the Assessment of Cost Weights (InEK GmbH) published in the G-DRG V1.0 version.

RESULTS

From 1998 until 2001 the cost weights of medical procedures such as spine fusion operations and joint arthroplasty revision operations on the hip and on the knee with severe complications and co-morbidities increased continuously. This development was not seen in DRG's without complications and co-morbidities, in food and ankle procedures and in shoulder procedures. The average length of hospital stay decreased continuously with very few exceptions. The average length of stay for so called C-DRG's (I09, I12, I13, I68, I69, I71, I75, I76) and in particular so called Z-DRG's (I16-I27) are in general longer by a factor of at least 2 in German hospitals when compared to Australian hospitals.

CONCLUSION

A high quality of right-coding of ICD and ICPM Codes is a prerequisite to reach the correct revenue-relevant DRG. In Germany the average length of hospital stay is significantly longer than in Australia. In general the MDC-8-DRG's have demonstrated a smaller range when compared with the first calculated German DRG's in respect to the complexity of the procedures. Future management of the expected reductions in hospital stay will be based on a continuous co-operative efforts to improve the structural-, process- and (clinical guidelines and clinical pathways) and outcome quality of our medical procedures. The central objective of this effort is the well-being of our patients.

[Effect of rotation of the femoral and tibial components on patellofemoral malalignment in knee arthroplasty]

Patellofemoral complications are among the most common causes for revision surgery in total knee arthroplasty. So far no quantitative assessment has been made of the femoral and tibial malalignment or the positioning of the patellar component and the type of patellofemoral complication or failure. In particular, no comparative studies are available that include patients with and without patellofemoral failure in respect to the above-mentioned parameters when implant material, implant design, and fixation technique were identical. Between 1985 and 1992, 171 MG I total knee arthroplasties were performed. Since 1999, 20% of all the implanted MG I knee arthroplasties (all with metal-backed patellar component) had to be revised. Of those 34 patients, 18 were pair matched with 18 control patients based on the criteria of sex, body mass index, and age. The only difference in the control group was that they did not suffer any malfunction of the patellofemoral mechanism. To assess the patella component localization, conventional AP radiographs, patellar merchant view radiographs in 30 degrees, and CT scans were performed. This study has demonstrated a significant difference for the thickness of the patellar component and a trend regarding the rotational malalignment of the tibial component. Potential causes for the malrotation and guidelines to prevent rotational malalignment are discussed.

[What effect does the hydroxyapatite coating have in cementless knee arthroplasty?]

The goal of this study was to compare the migration of noncemented diffusion sintered titanium fibermesh-coated tibial components with (HA group) and without (non-HA group) additional hydroxyapatite coating. For this purpose digital radiostereometry (DIRSA) was used to compare the migration after 2 and 9 years for the two groups. After 2 years the mean maximum subsidence of the HA-coated components (0.24+/-0.18 mm) was about one-half of the mean maximum subsidence of the non-HA-coated group (0.55+/-0.55 mm). After 9 years the maximum subsidence of the HA-coated components was still smaller, but not as pronounced as before. The same trend was also found for the endpoint maximum total point motion (MTPM). After 2 years the mean MTPM of the HA-coated components was 0.66+/-0.38 mm and of the non-HA group 0.73+/-0.50 mm. After 9 years the mean MTPM for the HA-coated components was 0.54+/-0.15 mm and for the non-HA-coated components 0.74+/-0.20 mm. None of the HA-coated tibial components but one of the non-HA group had to be revised and exchanged due to aseptic loosening.

[Effect of extracorporeal shockwave therapy on vascular regulation. Infrared thermography in epicondylitis humeri radialis]

BACKGROUND

Extracorporeal shockwave therapy (ESWT) is recommended as an alternative treatment for lateral epicondylitis (LE). An influence on the blood perfusion is considered to be one possible effect. Infrared thermography is used in this trial to measure effects of ESWT on the thermal regulation in the target area.

METHODS

33 patients with chronic LE were examined in a prospective, placebo-controlled single blind study with an independent observer. 3 x 2000 impulses of an energy flux density ED+ 0.22 mJ/mm2 were applied under local anaesthesia as verum-ESWT. Placebo-ESWT was performed under the same conditions. One elbow was treated, the other served as control. Before and after each shockwave application and after 12 weeks skin temperature was measured on both elbows at three predefined points by infrared thermography.

RESULTS

While a significant decrease in the skin temperature was found on the treated and sham-treated sides opposed to the contralateral side, there was no difference between the real shockwave treatment and placebo therapy. Responder and Non-responder to the treatment could not be distinguished during the therapy.

DISCUSSION

Infrared thermography was proved to be a valuable additional technical instrument for diagnosis of LE, but is not an appropriate instrument to predict the clinical outcome in patients treated with ESWT. A noted reduction of skin temperature on the treated side is not due to specific effects of the shockwaves. It is unlikely that ESWT as applied has an influence on thermal regulation in the target area. These findings are supported by negative results of experimental and clinical trials.

The blood supply of the growth plate and the epiphysis: a comparative scanning electron microscopy and histological experimental study in growing sheep

The blood supply of the growth plate has been described in the late 50s and early 60s, and there was controversial discussion about the existence of transphyseal vessels. The vascular supply of growth plate and epiphysis of the proximal tibia was reinvestigated using a modern technique, the Mercox-perfusion method, in six sheep aged 6-24 weeks. A comparison was made among pure perfusion specimens, the corrosion casts, and histological sections. The metaphyseal, epiphyseal, and perichondral blood supply systems were confirmed. However, there was evidence of regular transphyseal anastomoses between the metaphyseal and epiphyseal system. Based on the histological arrangement of the blood vessels, the arterial blood flow would appear to be from the metaphysis to the epiphysis. The existence of transphyseal arterial vessels originating metaphyseally and seen both in cast preparations and histological sections was added to the present description of the blood supply of the growth plate. Age-related differences in the vascularization of the growth plate were not found in this study.

[Cytokine profile of a human bone marrow cell culture on exposure to titanium-aluminium-vanadium particles]

INTRODUCTION

The purpose of this study was to prove the effect of wear particles, especially Tivanium, in the mechanism of the aseptic loosening of total joint prostheses.

MATERIALS AND METHODS

Therefore, human bone marrow cell cultures were incubated with titanium-aluminium-vanadium particles of different concentrations which were added after the seventh day of culture (10(9), 10(8), 10(7), 10(6) particles per ml medium). From this time starts the real culture period (2 weeks). During these two weeks the medium was changed and the supernatants were sampled. Using an ELISA the cytokine levels of interleukin-6, interleukin-1beta, TNF-alpha and LDH were measured approximately every second day (1, 3, 6, 8, 10, 14). As a marker for toxicity the activity of LDH was determined.

RESULTS

Incubation of a human bone marrow cell culture with titanium-aluminium-vanadium particles led to a maximum release of interleukin-6, interleukin-1beta, and TNF-alpha at high particle concentration (10(9) particles per ml medium). An increase of interleukin-1beta was only detectable at particle concentrations of 10(9) per ml medium. Exposure of the human bone marrow cell culture to titanium-aluminium-vanadium particles was toxic for high particle concentrations (10(9) particles per ml medium), as reflected by release of the intracellular enzyme LDH.

DISCUSSION

This study shows the ability of tivanium wear particles in a human bone marrow cell culture to induce a signfically higher release of proinflammatory and osteolytic mediators which are responsible for the aseptic loosening of prosthesis and the problem of revisions. In comparison to other cell studies, our results were explained by the human bone marrow cell culture. The human bone marrow is the real effector tissue source "in situ" because the prosthesis is localised intramedullarly.

A new semirigid implant for instrumentation of scoliosis: preliminary report

A new set of pedicle screws, lamina and pedicle hooks, longitudinal rods and a titanium cable was developed to overcome the increasingly obvious hazards of overly rigid spinal instrumentation. Results of the first 12 consecutive scoliosis patients with this new system are reported, with an average follow-up time of 18 months. No major complications occurred. The average correction of the deformity was well within the range of more rigid systems. The new Dorsal Dynamic Spondylodesis (DDS) system proved to be easy to use, fast, powerful, safe, versatile, and biomechanically sound. Reduction of stress-shielding effects and protection of adjacent segments can be expected, and the system warrants future application in selected prospective cases with long-term follow-up.

The influence of intermittent external dynamic pressure and tension forces on the healing of an epiphyseal fracture

In vitro studies about the regenerative capacity of chondrocytes located in the growth plate of long bones revealed a potential for reparation. A measurable advance in the understanding of the physiologic processes in the bone growth plate and their modifications after defined lesions is based on the recognition of the role of the vascular architecture. Newly formed bridging arteries crossing from the metaphysis to the epiphysis through the growth plate are thought to be responsible for the cell proliferation observed after Salter-Harris I and II lesions. We aimed to examine the influence of mechanical microstimulations on the growth or inhibition of the proliferation of the chondrocytes in the tibial growth plate. We studied 22 tibial bone fractures, which were stabilized with a dynamic or a stable external fixateur. Proliferative changes in the bone tissue were examined by immunohistochemical classification using bromodeoxyuridine (BUdR), a thymidine analogue. Radiologic studies, computer tomography, and magnetic resonance imaging documented the results in comparison with histological examination. Cell proliferation in the growth plate was not stimulated in the 1st week after distraction. The histological studies revealed an initial increase in proliferation of chondrocytes, especially between the 2nd and the 4th week. This was more clearly seen with the use of the dynamic fixator. We conclude that a temporary ischemia with a reactive hyperemia takes place, which we could document by histological analysis and MRI. These results could modify the current clinical therapy of growth plate fractures.

The long-term (8-12 years) results of valgus and lengthening osteotomy of the femoral neck

Shortening of the femoral neck and proximal displacement of the greater trochanter are the principal complications following avascular necrosis of the capital epiphysis head in early childhood. We report here the long-term follow-up of a series of osteotomies performed to lengthen the femoral neck and thus to restore the normal anatomy and function of the hip joint. Out of a sample of 24 patients, 15 (62.5%) were reviewed at the end of a mean follow-up of 10 years and 2 months. Fourteen of them (93.3%) had originally complained of pain on walking which varied in severity. After the operation, five were free from pain at the end of the follow-up, 9 still experienced pain on walking, and 1 also reported pain at rest. Before the operation, a positive Trendelenburg's sign was found in 8 of the patients. This was still present in 2 at follow-up. The average perpendicular distance from the center of the femoral head to a horizontal plane passing through the tip of the greater trochanter (the centro-trochanteric distance) was reduced from 33 mm to 7 mm. Apart from correcting the anatomical deformity, it is suggested that this operation may well provide lasting relief from pain and increase the power of the abductor muscles. It may also delay the onset of osteoarthritic change and in this way postpone the necessity for an endoprosthesis.

Low-energy extracorporeal shock-wave treatment (ESWT) for tendinitis of the supraspinatus. A prospective, randomised study

We have performed a controlled, randomised study to analyse the effects of low-energy shock-wave therapy (ESWT) on function and pain in tendinitis of the supraspinatus without calcification. There were 20 patients in the treatment group and 20 in the control group. The former group received 6,000 impulses (energy flux density, 0.11 mJ/mm2) in three sessions after local anaesthesia. The control group had 6000 impulses of sham ESWT after local anaesthesia. The patients were examined at six and 12 weeks after treatment by an independent observer who evaluated the Constant score and level of pain. We found an increase in function and a reduction of pain in both groups (p < or = 0.001). Statistical analysis showed no difference between the groups for the Constant score and for pain. We therefore do not recommend ESWT for the treatment of tendinitis of supraspinatus.

Low-energy extracorporeal shock-wave treatment (ESWT) for tendinitis of the supraspinatus

We have performed a controlled, randomised study to analyse the effects of low-energy shock-wave therapy (ESWT) on function and pain in tendinitis of the supraspinatus without calcification. There were 20 patients in the treatment group and 20 in the control group. The former group received 6000 impulses (energy flux density, 0.11 mJ/mm2) in three sessions after local anaesthesia. The control group had 6000 impulses of sham ESWT after local anaesthesia.

The patients were examined at six and 12 weeks after treatment by an independent observer who evaluated the Constant score and level of pain. We found an increase in function and a reduction of pain in both groups (p ≤ 0.001). Statistical analysis showed no difference between the groups for the Constant score and for pain. We therefore do not recommend ESWT for the treatment of tendinitis of supraspinatus.

Cell differentiation under the influence of rh-BMP-2

Bioactive bone growth factors will likely play an important role in the regeneration of bone. BMP-2 is known to promote osteoblastic cell differentiation and osteogenesis. Whether the BMPs act on human osteoblastic cells by increasing immature cell growth and/or differentiation is unknown. The goal of this study was to analyse possible effects of rhBMP-2 on cell differentiation using a human bone marrow cell culture. rhBMP-2 was added to the culture medium once. Fourteen days after addition of rhBMP-2 the cells were incubated with monoclonal antibodies. The cells were counted and analysed in a fluorescence-activating cell sorter (FACS). Compared to the controls there was an increasing effect on granulocytes, B cells and stem cells. The T-cells and monocytes show no increase or decrease after rhBMP-2 treatment.

[10 years results with a Monobloc hip endoprosthesis cup with multilayer titanium mesh coating for cement-free implantation]

PURPOSE

Can a cementless hemispheric acetabular component which is made of ultra-high-density polyethylene (UHMW-PE) and a heat-bounded porous titanium mesh coating be recommended 10 years after implantation?

METHODS

Between 1986 and 1988, 279 total hip arthroplasties in which the cementless socket had been used were performed in 261 patients. The results of 145 patients with 159 hip sockets (55.5%) were reviewed clinically and radiologically for comparison after a minimum of 10 years. The clinical and radiological re-examination was documented in a standardized questionnaire in which several scores were integrated. All X-rays were stored and analysed by a special hardware and software computer system.

RESULTS

The mean age of the female patients (n = 85) was 63.1 years and of the male patients (n = 60) 60.9 years. The mean follow-up period was 10 years and 3 months. The Merle d'Aubigné hip score increased from 10.9 to 16.5 points at the follow-up evaluation. Radiolucent lines and cysts according to the zones of DeLee/Charnley were seen only in 2% of all cases. The mean polyethylene wear (head disarrangement) was measured with 1.79 mm after 10 years and 1.92 mm after 11 years. In total, 16 revisions (5.7%), 13 (4.6%) aseptic and 3 (1.1%) septic, out of 279 implanted sokets had to be performed. In particular, the acetabular cup with a diameter of 48 mm demonstrated a high loosening rate (4 of 9). The 10-year survival analysis (Kaplan-Meler) was measured with 92.8%.

CONCLUSION

Our results with a cementless socket with titanium mesh coating show insignificant radiolucent lines and an exceptional high 10-year survivorship in which the particular implant philosophy is of great importance for the long-term success. In conclusion, the acetabular component can be recommended for further implantation.

Prevention of venous thromboembolism after knee arthroscopy with low-molecular weight heparin (reviparin): Results of a randomized controlled trial

PURPOSE

Deep venous thrombosis (DVT) is a common, important complication of major orthopaedic surgery, particularly knee arthroplasty. Knee arthroscopy is increasingly performed on an outpatient basis. Few reports have elucidated the incidence of venous thromboembolism (VTE) in patients undergoing arthroscopic surgery receiving no prophylaxis. The objective of the present trial was to evaluate the risk of VTE in those patients and to determine efficacy and safety of a low-molecular weight heparin (LMWH) in preventing VTE.

TYPE OF STUDY

This is the first controlled randomized trial using objective diagnostic methods with blinded outcome assessment to reveal the incidence of VTE in outpatient arthroscopy and determine efficacy and safety of a LMWH (reviparin sodium) in preventing VTE in these patients.

METHODS

There were 262 patients undergoing elective knee arthroscopy prospectively randomized to receive either no treatment or reviparin once daily subcutaneously for 7 to 10 days. The blindly assessed primary outcome measure was the incidence of DVT detected by compression color-coded sonography. Both groups were comparable with regard to demographics and baseline characteristics.

RESULTS

239 patients were evaluable (122 no treatment, 117 receiving LMWH). 6 DVT were detected - 5 in the control group (5/117 - 4.1%) and only one in the active treatment group (1/116 - 0.85%). This particular patient had a low level of protein C and a subnormal level of protein S. The odds ratio of 4.95 approximates a relative risk reduction of about 80%. Treatment with reviparin was safe and well tolerated. There was no major bleeding, four patients with minor bleedings. One patient had a transitory fall in platelet count below 100 giga-particles/L without any clinical symptoms.

CONCLUSIONS

Patients undergoing knee arthroscopy have a moderate risk of VTE and effective prophylaxis can be achieved with LMWH (reviparin).

Lumbar spine curvature during office chair sitting

Prolonged sitting is generally accepted as a high risk factor in low back pain and it is frequently suggested that a lordotic posture of the lumbar spine should be maintained during sitting. We asked whether the sagittal curvature of the lumbar spine during sitting is affected by the seat tilt, backrest and the direction of the synchronised mechanism of the back and seat tilt (synchro tilt). Two office chairs were tested by multibody analysis interfacing a human model with a chair model. Results indicate that a synchronised mechanism of an office chair representing a posterior tilt of the seat while the backrest is reclined maintains an evenly distributed lumbar lordosis. The segmental angles are between 3.1 and 3.6 degrees at the lumbar vertebrae 1/2-4/5 (L1/2-L4/5). These lumbar spine segmental angles are not sensitive to the backrest height. In contrast, a synchro tilt concept with a reduction of the seat's posterior tilt while the backrest is reclined causes a strong reduction of the lumbar lordosis in backrest recline with a maximum reduction from 11.7 to 2.8 degrees in L4/5. As a consequence of these results, a synchro tilt concept with a posterior tilt of the seat while the backrest is reclined is preferable from the lumbar spine kinematics point of view.

Missing osteoconductive effect of a resorbable PEO/PBT copolymer in human bone defects: a clinically relevant pilot study with contrary results to previous animal studies

PEO/PBT 70/30 (POLYACTIVE(R) 70/30), a degradable porous copolymer with elastic properties, was found to be osteoconductive in many animal studies. The aim of this study was to determine the osteoconductive effect in a human paired control iliac defect model. In seven patients undergoing anterior spinal interbody fusion surgery, two bicortical iliac defects for autograft harvesting were created. The defect size was identical for both defects measuring about 40 x 15 mm (group I). One defect was filled with the degradable implants, whereas the remaining one was left untreated as a control. The defect site for treatment was chosen randomly. In three further patients, only one defect measuring about 40 x 35 mm was created (group II). All patients were examined clinically and radiologically by spiral-CT after 1, 6, 12, 24, and 52 weeks. Three-dimensional reconstructions as well as CT-volumetric measurements using 1 mm sections were used as evaluation methods. In group I, a two-tailed paired t-test showed that the treated defects had significantly less formation of new bone than the untreated ones (p < 0.05 after 12 weeks, p < 0.01 after 52 weeks). Also, in group II, not much bone ingrowth could be observed. The histological evaluation of one patient in group I revealed no bone within the pores, and a fibrous layer between bone and implant was always present. Therefore, PEO/PBT 70/30 cannot be recommended as a bone substitute for clinical use. Differences in bone regeneration between humans and certain animal species as well as inapplicable defect models in previous animal studies are discussed as possible reasons for the failure.

Loosening of a fenestrated femoral prosthesis: a case report with histomorphologic analysis

The explanted loose stem of a trabecular cementless femoral prosthesis (Holz-Copf) was histologically analyzed revealing soft tissue 3 mm thick between the metal of the prosthesis and the cancellous bone. Direct contact between the implant and bone could not be found. Removal of the prosthesis was impossible by simple extraction so that a transfemoral approach was required. Prostheses with large fenestrations may be loose but at the same time ingrown with sufficient bone to require invasive procedures for their removal.

Thoracic disc herniation: a diagnostic challenge

An unusual case of lower thoracic disc herniation combined with shoulder pain is presented in this case report, A literature search showed that shoulder pain associated with a lower thoracic disc herniation has not yet been reported. An acromioplasty for chronic impingement syndrome was performed to relieve the patient's shoulder symptoms. An unsatisfactory outcome plus a progressive but incomplete paraplegia, prompted further investigation and this revealed a low thoracic herniation. The nucleotomy which followed afterwards lead to a rapid improvement of both the shoulder symptoms and the incomplete paraplegia. This case report shows that chronic shoulder pain may be caused or exacerbated by a thoracic disc herniation in the low thoracic spine. Therefore, prior to performing surgery for peripheral joint symptomatology, the possibility of a central sensitising trigger should be excluded by physical examination of neural tissue dynamics as well as any other necessary confirmatory investigations.

Spinal load changes during rotatory dynamic sitting

OBJECTIVE

To measure load and moment changes acting on the lumbar spine during rotatory sitting.

BACKGROUND

A new chair concept generating dynamic stimuli by alternating rotations in the horizontal plane of the chair's seat was recently developed.

METHODS

Load and moment changes were measured telemetrically with a spinal fixator device in vivo.

RESULTS

A rotatory frequency of 0.22 Hz with an amplitude of 1.8 degrees to the right and left side showed maximum axial force changes in the fixator of 23 N and maximum bending moment changes of 0.52 Nm.

CONCLUSIONS

Lumbar force and moment changes during dynamic sitting occur, although only one patient was included in the study. Reasons could be temporary muscular activation in order to adapt the body's equilibrium conditions at the end-point rotation. RelevanceOur measurements suggest that a rotatory chair does have an effect on lumbar spine forces. It becomes more likely that this concept could improve the discs' nutrition and may prevent low back pain.

Size and direction of hip joint forces associated with various positions of the acetabulum

When total hip replacement is performed, the position of the acetabular component may affect wear and component survival time. We considered the questions: In what way does displacement of the hip joint center alter (1) the magnitude and (2) the direction of the resultant force? Biomechanical tests were carried out on a human multibody model. After displacement of the hip joint center, the resultant forces were calculated for the single leg stance. With the flexed single leg stance, maximum hip joint forces were observed with lateral, cranial, posterior displacement. The peak forces were affected by the modeling of a gluteus maximus wrapping point at the ischial tuberosity and were overestimated when this was removed. With the straight single leg stance, posterior displacement decreases the total load on the hip joint because of the increased leverage of the rectus femoris. With regard to the direction of the resultant force, medial displacement increases the angles in both planes, cranial displacement increases it in the sagittal plane (cranial, posterior-caudal, anterior), and anterior displacement decreases the angle in the sagittal plane and increases it in the frontal plane (medial, cranial-lateral, caudal). The direction of the force is relatively insensitive to displacement of the hip joint center. The results presented here indicate a marked increase in the force after lateral, cranial, posterior displacement of the center in the flexed single leg stance. To avoid extreme joint loading and to reduce the wear after total hip arthroplasty, the cranial and posterior regions of the acetabulum should be fully reconstructed. A high hip joint center has an adverse effect on the magnitude of the force, although the directions are hardly affected by it.

[10 year results with a cemented fine-grit-blasted titanium-aluminum-vanadium hip endoprosthesis shaft]

PURPOSE

Are the results of cemented titanium hip arthroplasty as bad as described in literature? We present the 10-year results of a cemented mild grid blasted Titanium-Aluminium-Vanadium Stem in Total-Hip-Arthroplasty.

METHODS

The clinical and radiological reexamination was documented in standardized questionnaire in which several scores were integrated. All X-rays were stored and analysed by a special hardware and software computer system.

RESULTS

35% of all patients could be reexamined both clinically and roentgenologically. 71 patients were male (mean age 56.1 years) and 130 female (mean age 59.3 years). The average follow-up period was 11 years and 4 months. The mean Merle d'Aubigné hip score increased from 10.5 to 16.0 points at the follow-up evaluation. Radiolucent lines were according to the zones of Gruen seen in 1% to 22% depending on the zone and the size of the femoral component. 18 reoperations of the femoral component (2.9%) had to be performed. The survivorship analysis (Kaplan-Meier) showed a 95.4% survival of the femoral component after 10 years.

CONCLUSION

Our findings with a cemented mild grid blasted Titanium-Aluminum-Vanadium stem demonstrate excellent results unlike it was reported for cemented femoral components of similar alloy but different design and cementation philosophy.

[A scale for measuring symptoms related to degenerative diseases of the cervical spine. A reference in determining indications and evaluating surgical outcome]

A scale for measuring symptoms related to degenerative diseases of the cervical spine is presented. Twenty typical symptoms are listed, e. g., neck pain, dysesthesia, and reduced mobility. Responses are assessed via a 6-point scaling ("did not have symptom" - "had symptom and suffered very strongly".) The cervical spine scale was tested in three samples: patients having undergone cervical spine surgery (n = 70), patients with other orthopedic diagnoses (n = 104), and healthy students (n = 100). The single items of the scale were aggregated into four scores: total number of symptoms, degree of overall symptom distress, functional disability, and pain/psychological distress. Statistical analyses proved the high reliability (Cronbach's alpha = 0.85 to 0.95) and validity (content, convergent, discriminant) of all scores. The scale differs clearly between cervical spine patients, other orthopedic patients and healthy individuals, and between cervical spine patients with different subjective operative outcomes. For applied clinical purposes the cervical spine scale can be included in a quality of life profile (QL-profile); this allows for a readily understandable graphic depiction of individual patients' QL-status.

Prevention of heterotopic bone formation after total hip arthroplasty: a prospective randomised study comparing postoperative radiation therapy with indomethacin medication

Heterotopic ossification (HO) after total hip arthroplasty is known to be a major complication with an impact on the functional outcome. Efforts have been made to prevent the occurrence of HO by means of either radiation therapy or pharmacotherapy. To date, there are no data available regarding the relative benefit of radiation versus medication with non-steroidal anti-inflammatory drugs. The objective of this study was to compare single-dose 600-cGy radiation therapy with indomethacin medication for their effect on the prevention of heterotopic bone formation after total hip arthroplasty. In all, 154 patients were included in the study. All patients underwent primary total hip arthroplasty due to osteoarthritis. Patients were randomly assigned to three different therapeutic groups. (a) The radiation group received a single radiation dose of 600 cGy between the 2nd and 4th postoperative day. (b) The indomethacin group received an oral application of indomethacin 2 x 50 mg per day from the 1st to 42nd postoperative day. (c) The control group received neither radiation nor indomethacin medication. There were significant group differences (P < 0.001). A least significant difference test (LSD) revealed that the mean of the control group was significantly different from that of the radiation and indomethacin groups. The 13 patients (8.4%) classified Brooker 3 or 4 were all in the control group. Again, this effect was statistically significant (chi-square, P < 0.001). In conclusion, this study demonstrated that both radiation and indomethacin therapy are effective in the prevention of postoperative HO. The choice for either one of the treatments has to be based on availability, contraindications, side-effects, practicability, standardisation and cost. Based on these considerations together with the results of this study, we currently use postoperative radiation with 600 cGy for all patients undergoing primary total hip arthroplasty.

Implant fixation by bone ingrowth

The term osseointegration referred originally to an intimate contact of bone tissue with the surface of a titanium implant; the term bone ingrowth refers to bone formation within an irregular (beads, wire mesh, casting voids, cut grooves) surface of an implant. The section dealing with the historical background describes the development of macroporous, microporous, and textured surfaces with an emphasis on the evolution of porous and textured metal surfaces. The principal requirements for osseointegration and bone ingrowth are systematically reviewed as follows: i) the physiology of osseointegration and bone ingrowth, including biomaterial biocompatibility with respect to cellular and matrix response at the interface; ii) the implant surface geometry characteristics; iii) implant micromotion and fixation modes; and iv) the implant-bone interface distances. Based on current methods of bone ingrowth assessment, this article comparatively reviews and discusses the results of experimental studies with the objective of determining local and systemic factors that enhance bone ingrowth fixation.

Biocompatibility analysis of different biomaterials in human bone marrow cell cultures

A cell culture system for biocompatibility testing of hip implant materials is described. Human bone marrow cells have been chosen because these cells are in direct contact with the biomaterial after implantation in situ. The sensitivity of this method is evaluated for materials which are already being used as implants in humans and animal, e.g., hydroxyapatite (HA) ceramic, pure titanium, and ultra-high-molecular-weight polyethylene (UHMWPE). As indicative parameters of biocompatibility primary cell adherence, cell number, cell proliferation, production of extracellular matrix, cell vitality, and cell differentiation are described. After 2 weeks in culture, obvious differences between the biomaterials with respect to the indicative parameters could be observed. Cell numbers were greatest on the HA specimens. In the case of titanium alloys, we observed a decreased number of cells. The production of extracellular matrix was high for the HA ceramics but reduced for titanium specimens. The polymers allowed only a few adherent cells and showed no signs of extracellular matrix production. The results can be correlated astonishingly well to animal experiments and clinical experiences. Therefore, we suggest that this cell culture system seems to be a useful tool for biocompatibility testing of bone implantation materials. It also helps reduce animal experiments. With the help of flow cytophotometry, we analyzed the influence of biomaterials on large numbers of cells with respect to differentiation. There were similar populations of T cells and monocytes on all specimens tested. Extended B-cell and granulocyte populations, however, were observed with titanium and UHMWPE. Most osteocalcin-containing cells adhered to the HA ceramics.

Biocompatibility analysis of different biomaterials in human bone marrow cell cultures

A cell culture system for biocompatibility testing of hip implant materials is described. Human bone marrow cells have been chosen because these cells are in direct contact with the biomaterial after implantation in situ. The sensitivity of this method is evaluated for materials which are already being used as implants in humans and animal, e.g., hydroxyapatite (HA) ceramic, pure titanium, and ultra-high-molecular-weight polyethylene (UHMWPE). As indicative parameters of biocompatibility primary cell adherence, cell number, cell proliferation, production of extracellular matrix, cell vitality, and cell differentiation are described. After 2 weeks in culture, obvious differences between the biomaterials with respect to the indicative parameters could be observed. Cell numbers were greatest on the HA specimens. In the case of titanium alloys, we observed a decreased number of cells. The production of extracellular matrix was high for the HA ceramics but reduced for titanium specimens. The polymers allowed only a few adherent cells and showed no signs of extracellular matrix production. The results can be correlated astonishingly well to animal experiments and clinical experiences. Therefore, we suggest that this cell culture system seems to be a useful tool for biocompatibility testing of bone implantation materials. It also helps reduce animal experiments. With the help of flow cytophotometry, we analyzed the influence of biomaterials on large numbers of cells with respect to differentiation. There were similar populations of T cells and monocytes on all specimens tested. Extended B-cell and granulocyte populations, however, were observed with titanium and UHMWPE. Most osteocalcin-containing cells adhered to the HA ceramics.

In vitro testing of a new transpedicular stabilization technique

The rigidity of a pedicle screw implant is a critical biomechanical variable in lumbar spinal fusions. Sufficient rigidity is required for integration of bone grafts and to promote healing. Osteopenia, stress shielding, and compensatory hypermobility have been described as consequences of excessive rigidity. Little is known about the biomechanical characteristics of "semirigid" compared to "rigid" implants. A new implant, whose rigidity can be varied by selection of different implant components, was tested in vitro under well-defined loading conditions. The three-dimensional load-displacement behavior of all lumbar vertebrae involved in or adjacent to the two-level fusion was evaluated for two fusion modifications: bilateral rigid and bilateral semirigid. Cyclic fatigue loading was subsequently carried out under realistic conditions and motion testing repeated. The rigid device reduced the motion of the L3-4 transfixed segment in the primary movement planes by 87.3% with respect to the intact spine value in flexion/extension (FE), 86.3% in lateral bending (LB), and 76.8% in axial rotation (AR). The semirigid device achieved a reduction in motion of 79.6% (FE), 82.7% (LB), and 51.7% (AR). The semirigid implant was particularly easy to insert, because no bending of rods or plates was necessary. The implants showed no loosening or breakage after the fatigue testing. The results are compared to other available systems and the underlying biomechanics discussed.

Recombinant and nonrecombinant factor XIII and its effect on bone ingrowth and strength of fixation

Thirty cylindrical, commercially pure, titanium fiber, porous-coated Ti6Al4V implants were inserted press-fit into the proximal humeral portion of 30 sheep humeri to determine the systemic effect of recombinant factor XIII and placenta-derived factor XIII concentrate on bone ingrowth and strength of fixation. For both the recombinant factor XIII and the factor XIII concentrate group, the volume of bone ingrowth and the strength of fixation were higher than for the control specimens. However, the difference was only significant for the factor XIII concentrate group.

Standardized evaluation of long-term results after anterior lumbar interbody fusion

A total of 113 patients, excluding those with tumor, spondylitis, and idiopathic scoliosis, underwent anterior lumbar interbody fusion (ALIF) with autologous iliac crest graft between 1984 and 1991 at our department. The proportion of these who were failed back patients was higher than that reported in the literature. Evaluation of functional outcome was feasible in 80 patients, utilizing Oswestry and Marburg scores, which were closely intercorrelated. The overall results yielded an improvement in the Oswestry score of 35.7 percentage points. A subset of 52 patients who were evaluated twice, showed the same results at an average of 6.6 years as they did at 2.3 years following surgery. Functional results showed a weak correlation with postoperative height loss of the intervertebral space. Influencing factors for the functional result were: postoperative compensation claim, age, and obesity. Of the professional people involved, 19.4% did not return to any occupation. Patients satisfied with the result had significantly greater functional improvement. Younger patients with additional dorsal distraction prior to ALIF for reduction of severe spondylolisthesis fared better than patients with ALIF alone. The rate of complications was low and did not contribute to the postoperative functional result. On the basis of these results further prospective studies have been designed and are currently underway.

Effect of specimen fixation method on pullout tests of pedicle screws

STUDY DESIGN

Experimental axial pullout tests of a new type of pedicle screw were done on cadaveric lumbar vertebrae. The manner in which specimens were secured in the testing apparatus was varied to determined influence of specimen fixation method on the maximum pedicle screw pullout force.

OBJECTIVES

To determine the appropriateness of embedding (i.e., potting) spinal specimens in polymer resin (e.g., bone cement or Plastic Padding [Plastic Padding Ltd., High Wycombe, Buckinghamshire, England]) for axial pullout tests of pedicle screws. Several different specimen fixation methods were examined to make recommendations for the standardization of future experimental testing protocols.

SUMMARY OF BACKGROUND DATA

Axial pullout of transpedicular screws, although not a likely clinical mode of failure, is a popular experimental testing mode for evaluating screw-bone biomechanics. A wide variety of techniques for securing a vertebral specimen to counter the axial pullout force has been reported (including the use of polymer resin) with a correspondingly wide range in the resulting axial pullout strengths. The possible influence of the specimen fixation method on pedicle screw axial pullout strength has not been addressed previously.

METHODS

Axial pullout tests of pedicle screws (DDS, Plus Endoprothetik, Rotkreuz, Switzerland) from the pedicles of 21 isolated lumber vertebral bodies were done using a Model 810 MTS Universal Testing Machine (MTS Systems, Inc., Minneapolis, Minnesota). The specimens were secured in a custom-made vise fixture either as is or after the vertebral bodies were potted in Plastic Padding up to the pedicle origin. Some of the potted specimens were wrapped first in latex to prevent polymer resin intrusion, and the others were unprotected. Pullout tests were attempted on both the left and right pedicles of each specimen, and the maximum pedicle screw pullout force was recorded. Measurement of bone mineral density by means of dual energy x-ray absorptiometry, in addition to macroscopic and scanning electron microscopy histologic analyses, microradiography, and energy dispersive X-ray spectroscopy, was done post-test to assist in the interpretation of the data.

RESULTS

The maximum pedicle screw pullout force was found to be dependent on both the bone mineral density and the mode of fixation of the vertebrae. Embedding in polymer resin without protection of the specimen (i.e., latex wrapping) led to several instances of well-documented polymer resin intrusion; in these specimens, mean maximum pedicle screw pullout force was significantly greater than that of specimens secured without polymer resin and that of embedded specimens for which intrusion did not occur.

CONCLUSIONS

Polymer resin intrusion can have a significant effect on the biomechanical characteristics of the bone-pedicle screw interface. When polymer resins are used to secure vertebral specimens for in vitro biomechanical tests of the bone-pedicle screw interface, it is important to either prevent intrusion (e.g., with a latex wrapping) or document post-test (e.g., through the methods described in this article) that intrusion did not occur for the specimens included in the analysis.

[Depressivity and successful outcome of spinal surgery]

INTRODUCTION

The relationship between depression and the outcome of low back surgery was investigated. Data analysis was based on two assumptions: (1) Presurgical assessments of depression are correlated with the outcome of surgery, and, therefore, depression can be interpreted as a risk factor for surgical failure. (2) Postsurgical assessments of depression are correlated with the outcome of surgery, and therefore, depression can be interpreted as a response to treatment failure.

METHODS

The sample was made up of 78 patients who had undergone lumbar nucleotomy and 132 patients with lumbar spondylodesis. Treatment outcome was evaluated 6 months after surgery in the nucleotomy group and 9 months after surgery in the spondylodesis group. Depression was assessed with the Beck Depression Inventory (BDI). Measures of treatment outcome were an objective rating system for the surgical result, functional impairment, return to work, subjective estimations of the patient, and pain intensity.

RESULTS

Presurgical depression scores showed no significant relationship with surgical outcome in nucleotomy patients. In spondylodesis patients, however, there was a significant negative correlation with the patients' subjective outcome ratings. Postsurgical depression scores, on the other hand, were significantly related to almost all of the outcome variables in both treatment groups. Patients with clinically relevant postsurgical depression scores were significantly more likely not to benefit sufficiently from surgery than those with clinically not relevant depression scores.

DISCUSSION

Our findings favour assumption 2 over assumption. 1. In the light of our findings, depressiveness is interpreted as a response to a non-beneficial outcome of surgery. The need for an interdisciplinary approach combining psychological counseling or treatment and physical therapy for those patients who do not benefit from surgery is discussed.

[Can preoperative lung function diagnosis detect risk of intraoperative pulmonary gas exchange insufficiency in artificial hip replacement with polymethylmethacrylate cement?]

In a study of 90 patients in whom a hipjoint had been replaced for the first time using polymethylmetacrylate cement, the extent of intraoperative pulmonary gas exchange disorders was established. The effect of a preexisting disorder of lung function was determined. We checked whether an appraisal of the risk patients who are operated on can be assisted by a preoperative analysis of lung function. After preoperative diagnosis of lung function, the arterial blood gases were analysed at defined times during the operation. An intraoperative fall in the partial pressure of oxygen and an increase in carbon dioxide partial pressure in the arterial blood were found in all patients. There were pronounced interindividual differences in the extent of the disorder of pulmonary gas exchange. The degree of severity of the respective acute disorder of lung function did not show any correlation with the pre-existing disorder of pulmonary ventilation. Major hemodynamic changes were not observed. According to the present findings, a definitive statement with regard to the degree of severity of intraoperatively occurring disorders of pulmonary function cannot be expected from a preoperative analysis of pulmonary function.

[Implant fixation strength and osseointegration following systemic administration of recombinant factor XIII and factor XIII concentrate. Animal experiment with implant fixation strength and osseointegration of porous surface implants]

30 cylindrical commercially pure titanium fiber porous coated Ti6A14V implants were inserted press-fit into the proximal humeral portion of 30 sheep humeri to determine the systemic effect of recombinant factor XIII and placenta-derived factor XIII concentrate on bone ingrowth and on strength of fixation. For both the recombinant factor XIII and the factor XIII concentrate group the volume fraction of bone ingrowth and the strength of fixation was higher when compared with the control specimens. However the difference was only significant for the factor XIII concentrate group.

Intrathoracic dural ectasia mimicking neurofibroma and scoliosis. A case report

Angular thoracic scoliosis combined with dural ectasia and foraminal enlargement is reported in a patient with neurofibromatosis. The dural cyst was resected through a high thoracic approach and the scoliosis dealt with by posterior spinal fixation with Modulock instrumentation. Follow up after 12 months showed no neurological deficit and no progress of the scoliosis.

[Human bone marrow cell culture--a sensitive method for the evaluation of the biocompatibility of materials used in orthopedics]

The objective of the study was to develop a test system to determine the cytotoxicity and biocompatibility of different biomaterials used in orthopedic surgery. This system was based on the use of a human bone marrow cell culture and the purpose was to find a screening method as a alternative to early animal experimental methods. The established human bone marrow cell culture has certain advantages when compared with other cell culture models. The result demonstrated a high conformity with animal experimental results.

False-positive sonographic hip examinations in newborns with congenital varus deformity of the proximal femur

In cases of congenital varus deformity of the proximal femur, the screening of hip dysplasia can lead to misinterpretations. The false-positive ultrasound result is caused by the superiorly displaced greater trochanter in hips with coxa vara, which narrows the scan window. In this paper three typical patients are presented to demonstrate that the use of additional non-standard views cannot exclude hip dysplasia in all cases. Hence, such patients with femoral abnormalities and doubtful sonographic findings should be further evaluated by arthrography or magnetic resonance imaging to rule out additional hip dysplasia.

[A new plate for dorsal occipito-cervical fusion. Design, surgical technique, initial clinical results]

A survey of actually practiced methods for cranio-cervical fusion is presented, followed by the description of a new osteosynthesis-plate to solidly fuse this region. The new plate offers a number of advantages when compared with competing procedures. It is rigidly fixed to the occipital bone by five screws, sublaminar wireloops bond the vertebrae to be fused to both branches of the U-shaped plate where the individual loops are positioned into obliquely ascending slots. This safely prevents migration and disengagement resulting in a high initial horizontal and vertical stability allowing for a postoperative care without external support. During the procedure tightening of the wire loops may succeed on reposition of the deformity. The plate exists in two lengths allowing fusion of C0-C2 or more segments of the cervical spine. The typical indication is instability of C0-C2 in rheumatoid arthritis or tumoral lesions of the area. Clinical experience in 7 patients suffering from rheumatoid arthritis (follow-up: 6-31 months) is very positive, fusion has occurred in all cases.

Early surgical treatment for congenital vertical talus

Congenital vertical talus is characterised by a dislocated talonavicular joint in association with an equinus position of the calcaneus. We report the results in 13 operated feet in 10 children, 3 of whom (5 feet) presented with a primary neurological disorder and 2 of whom (3 feet) suffered from arthrogryposis multiplex congenita. The other children were normal. All patients were surgically treated by a one-stage procedure which included reduction of the talonavicular joint and correction of the hindfoot equinus, trying to avoid tendon lengthenings and transfers. The age at operation was between the 3rd and the 6th month of life, with one child being operated on later due to other reasons. The patients were reviewed after an average time of 3.5 +/- 2.2 years. The clinical results were good or excellent in ten feet. Two feet showed partial or complete recurrence and one foot was slightly over-corrected. Radiographic angle measurements (talo-metatarsal I angle and talocalcaneal angle on the anteroposterior radiograph; talocalcaneal, tibiotalar and tibiocalcaneal angles on the lateral radiograph) returned to normal values in the ten good or excellent feet. Early operative treatment for congenital pes vertical talus leads to very satisfactory functional and cosmetic results, usually avoiding extensive procedures including tendon lengthenings and tendon transfers.