Perceptibility and acceptability of lightness difference of a single maxillary central incisor

OBJECTIVES

The aim of this study was to assess the lightness difference perceptibility and acceptability thresholds, for a single maxillary central incisor, and to investigate possible differences in these thresholds regarding the direction (+ΔL* vs. -ΔL*), the observer group (dentists vs. laypersons), and the gender and age of the observers.

MATERIALS AND METHODS

A series of images with varying lightness (L*), were created by altering the right maxillary central incisor of a male Caucasian, on a frontal view full-portrait image. Digital modification of one central incisor by 1 ΔL* unit resulted in 15 different images: one control, seven with increased and seven with decreased lightness. The images were presented in random order, on a digitally calibrated monitor, to 158 observers, grouped into 79 dentists, and 79 laypersons, who were asked to evaluate every image and answer whether they perceive a difference and if yes, whether they accept this difference. A multifactorial analysis of covariance was performed to analyze the perception and acceptance of any difference in the central incisors and to estimate the thresholds. The statistical significance level was α = 0.05.

RESULTS

Overall, the magnitude of ΔL*, direction of ΔL*, observer group and age were each significant (p < 0.001), as was gender (p = 0.03). The effect of the magnitude of ΔL* interacted with its direction and the observer group (p = 0.045), and the effect of age interacted with the direction of ΔL*, and the gender and the group of the observers. Estimated 50%:50% perceptibility thresholds ranged from 0.1 to 2.7, and 50%:50% acceptability thresholds ranged from 2.3 to 4.5. Overall, dentists perceived lightness differences at lower magnitudes than laypersons; difference in lightness was perceived and accepted at lower magnitudes when the tooth become lighter instead of darker; and female observers perceived and accepted lightness differences at lower magnitudes compared to males. As age increased overall, differences of lightness were perceived and accepted at higher magnitudes.

CONCLUSIONS

Perceptibility and acceptability of lightness differences of a single maxillary central incisor are affected by the magnitude and the direction of lightness change, as well as the gender, the age, and the type of the observers.

CLINICAL SIGNIFICANCE

Even small changes in lightness are perceivable; however, thresholds of perception and acceptance are dependent on the magnitude and the direction of change and are also dependent on the observer, with women, dentists and younger people perceiving and accepting changes at lower magnitudes of ΔL*.

The impact of dental midline angulation towards the facial flow curve on the esthetics of an asymmetric face: Perspective of laypeople and orthodontists

PURPOSE

The objective of the present article was to evaluate the ımpact of dental midline angulation in asymmetrical faces.

MATERIALS AND METHODS

A full-portrait image was used to create a set of digitally modified images with a different degree of facial asymmetry, towards the right and the left side of the face respectively. Half of the images were designed with an equivalent angulation of the dental midline in respect to the curve of the lower third of the face and half of them without. Through a web survey, 250 laypeople and 250 orthodontists were asked to assess the attractiveness of each image separately.

RESULTS

As the asymmetry of the face was increased, facial attractiveness was further decreased both for laypersons and orthodontists. For each one of the modified images, when the dental midline was following the curve that was formed from the inclination of the simulated asymmetry of the face, the smile attractiveness scores were significantly higher compared to a straight dental midline.

CONCLUSION

Facial asymmetries derived from the inclination of the nose, the chin and the commissural line of the lips can significantly affect the smile attractiveness. An orientation of the dental midline towards the facial asymmetry in order to follow the facial curve, can be beneficial for the smile attractiveness compared to a perpendicular to the face dental midline. During the design of a smile, clinicians have to take into consideration deviations in facial midline, in order their restorations to be in harmony with the rest of the face.

CLINICAL SIGNIFICANCE

During the design of a smile, clinicians have to take into consideration deviations in the facial midline, in order their restorations to be in harmony with the rest of the face.

Individualized digitally designed surgical template for guided soft tissue surgery in cases with severe gingival enlargement: A clinical application in hereditary gingival fibromatosis

AIM

The purpose of this study was to present the use of computer-assisted periodontal surgery utilizing a novel surgical guide for cases with severe gingival enlargement through a clinical application in a patient with hereditary gingival fibromatosis.

MATERIALS AND METHODS

The treatment plan included nonsurgical periodontal therapy, surgical periodontal treatment, and regular periodontal maintenance before the initiation of orthodontic treatment. Due to the increased soft tissue thickness, a surgical guide with a novel design was fabricated to facilitate the periodontal surgery since most of the patient's teeth were malpositioned and underexposed due to fibromatosis. For this purpose, the patient's intraoral scan was merged with a CBCT image in order to plan surgical excisions based on the anatomy of the teeth and the bone contour.

RESULTS

The customized surgical guide facilitated the gingivectomy by controlling not only the shape of the initial incisions but also their orientation toward the level of the cementoenamel junction, improving the efficiency of the clinical time compared with freehand surgery and assisting in the verification of the final soft tissue shape, based on the treatment plan.

CONCLUSION

Digital technology through the superimposition of multiple data sets can assist in the diagnosis and multidisciplinary management of cases with gingival fibromatosis. The proposed design of the surgical guide can facilitate soft tissue surgery based on the digital treatment plan, leading to more predictable management of the soft tissue, especially in patients with severe gingival enlargement, as in cases with hereditary gingival fibromatosis or drug-induced gingival overgrowth.

The Influence of a Single Infrapositioned Anterior Ankylosed Tooth or Implant Supported Restoration In Smile Attractiveness

OBJECTIVES

To investigate the influence of a single infrapositioned ankylosed tooth or implant supported restoration, in smile attractiveness.

MATERIAL AND METHODS

A series of 48 digital modified images, simulating a varying degree of infraposition(from 0.25 to 2.0 mm, with a step of 0.25 mm), was created for each one of the maxillary anterior tooth, by altering the full-portrait image of a smiling male adult, in medium and high smile lines. For the model with the high smile line, also a series of 24 digital modified images simulating infraposition of a single anterior tooth with a restored incisal edge was created. Smile attractiveness for each one of the images was evaluated from 160 participants (80 dentists and 80 laypersons), implementing a visual analog scale.

RESULTS

For the images with the high smile line, an infraposition ≥ 0.25mm in central incisor's region and ≥ 0.5mm in the region of the lateral incisor or the canine, had a negative effect on the perceived smile attractiveness both for the dentists and the laypersons. Regarding the medium smile line, an infraposition ≥ 0.5mm in central and lateral incisor's region, had a negative effect on the perceived smile attractiveness for both groups of observers. In the area of the canine, infraposition ≥ 0.5mm for the dentists and ≥ 0.75mm for the laypersons, had a negative impact on the smile attractiveness.

CONCLUSIONS

Even a minor infraposition of a single maxillary anterior ankylosed tooth or implant supported restoration, can reduce the perceived attractiveness of the face. Infraposition in canine's area can be better tolerated in a medium, compared to a high smile line. In patients with a high smile line prosthetic intervention in order to restore the incisal edge of an infrapositioned tooth, without to harmonize the gingival contour, can be beneficial for the lateral incisor, ineffective for the central incisor and unfavorable for the canine.

Tooth Splinting: Implementing a 3D-printed Guide with Pre-defined Composite Resin Reservoirs: A Digital Workflow

The integration of digital technologies in dentistry has led to the development of various techniques to facilitate tooth splinting. In the present digital workflow, the advantages of the virtual treatment plan were combined with the versatility of the commercially available tooth splinting materials. An intraoral scanner was utilized to digitize both arches along with the patient's occlusion, eliminating the need for models from physical impressions. A template based on the virtual design of the splint was 3D-printed and served as a guide to individualize a twisted wire. The bent wire was transferred and bonded, using a 3D-printed template with pre-defined reservoirs for the composite resin. Digital technology has been implemented for tooth splinting, by fabricating a splint after its virtual design. However, the digital fabrication of the metal splints is available for limited splinting materials and the service is only provided by specific centers around the world.

Translucent monolithic zirconia titanium-supported FP1 full-arch prosthesis: A novel proof of concept to address esthetic, functional, and biologic challenges

OBJECTIVE

Despite the wide clinical use of translucent zirconia for full-arch implant prostheses, reduced flexural strength and fracture toughness compared with high-strength opaque zirconia needs to be addressed. A novel proof of concept for FP1 full-arch prosthesis featured by translucent monolithic zirconia and titanium framework was presented.

CLINICAL CONSIDERATIONS

Computer-guided implant planning and surgery were executed and digitally designed FP1 temporary prosthesis prefabricated. Implant and prosthetic placement were achieved with a set of three-dimensional (3D)-printed templates. Implants were immediately loaded. After 4 months intraoral optical scan was taken to record implant coordinates, soft tissue anatomy, and temporary FP1 prosthesis. A novel digital workflow was used to design and mill overlaying translucent zirconia and anatomically shaped titanium framework with a scalloped soft-tissue interface. Final FP1 prosthesis was assembled cementing zirconia jacket on titanium counterpart.

CONCLUSIONS

Translucent zirconia supported by titanium framework can address esthetic and mechanical requirements of FP1 full-arch prosthesis, minimizing risk of fracture and providing a rigid and passive joint with supporting implants. The smooth and highly polished titanium surface with an anatomic design, tightly matching scalloped soft tissue interface, can limit food impaction, air and saliva leakage and contribute to overall biologic integration of FP1 full-arch prosthesis.

CLINICAL SIGNIFICANCE

Translucent monolithic zirconia featured with anatomically shaped titanium framework with scalloped transmucosal part, combining a pleasant esthetic outcome with increased flexural strength and fracture toughness, may be indicated to increase the clinical performance of FP1 full-arch prosthesis.

Reverse scan body: The scan pattern affects the fit of complete-arch prototype prostheses

PURPOSE

To assess the effect of different scan patterns on the fit of implant-supported complete-arch prototype prostheses fabricated via a complete digital extraoral protocol with a reverse scan body.

MATERIALS AND METHODS

A mandibular cast with four multi-unit abutment (MUA) implant analogs with adequate antero-posterior spread served as the reference cast, simulating a common clinical patient situation, and a polymethylmethacrylate interim screw-retained prosthesis was fabricated on it. Novel reverse scan bodies were connected to the interim prosthesis on the intaglio of the MUA abutments and extraoral scanning was performed with a white light intraoral scanner (TRIOS 4; 3 shape) and three different scan patterns: starting from the occlusal surface of the interim prosthesis (O-group), starting from the intaglio (I-group), and helix pattern (H-group).  The resulting STL files from the three groups were then imported to computer-aided design (CAD) software and after the digital design, the STL files were exported to a computer-aided manufacturing (CAM) milling machine which generated a total of 15 CAD-CAM milled prototype prostheses per group. Two clinicians assessed the fit of each digitally fabricated prototype prosthesis on the reference cast, utilizing the screw-resistance test and radiographic evaluation. Fisher's exact test was used to test the difference between the three groups, and Cohen's k-score was used to assess the inter-examiner agreement.

RESULTS

Out of the three different groups, the O-group scan pattern led to 100% prosthesis fit, while the prototype prostheses generated from I- and H-groups had 80% and 53% fit, respectively. The results were statistically significant (p = 0.008).

CONCLUSIONS

Occlusal scan pattern leads to fitting milled prototype prostheses after extraoral scanning with reverse scan bodies without intraoral implant data acquisition.

A digital protocol for the management of the restorative margin and the emergence profile of vertical prepared teeth

PURPOSE

To describe a digital workflow for the management of the emergence profile and restoration's finishing line on vertical prepared teeth, utilizing a digital data set.

MATERIAL & METHODS

The scan of the prepared teeth the day of the preparation, the scan of the provisional restoration placed on the preparation after soft tissue maturation and the scan of the provisional restoration outside of the oral cavity, are combined under a common data set, that can provide all the necessary information in order to design the final restoration.

RESULTS

The presented digital technique can facilitate the implementation of the vertical preparation, as the desired finish line can be defined by the clinician and be transferred predictable to the dental lab. Current approach provides also, an alternative gingival management method, taken advantage of the displacement of soft tissue in the appointment of vertical preparation.

CONCLUSIONS

The positioning of the final finishing line on vertical prepared teeth, the management of the soft tissue and the fabrication of the final restoration, can be facilitated combining digital data sets, that have been obtained during a distinct phase of the treatment.

Esthetic rehabilitation through crown lengthening and laminate veneers. A digital workflow

AIM

To describe a digital workflow utilizing 3D printing technology to guide esthetic crown lengthening and control tooth preparation.

CLINICAL CONSIDERATIONS

After the initial intraoral and face scans, an esthetic treatment plan was performed digitally based on the patient's personality and face type using artificial intelligence-based 3D smile design software. A 3D-printed tray relined with silicone over a 3D-printed model was used for the mock-up. A 3D-printed guide was implemented to assist esthetic crown lengthening by incorporating, simultaneously, information about the desired free gingival line and the alveolar bone level. Based on the initial planning, a set of reduction guides was 3D printed to check and correct the tooth preparation. Prior to the start of construction of the final monolithic restorations, their design was verified using 3D-printed prototypes. A stabilization splint was digitally designed and 3D printed to protect and maintain the final result.

CONCLUSIONS

Technologic advances can improve the predictability of an interdisciplinary esthetic approach. Digital planning can be transferred to clinical reality using a digital workflow, utilizing a set of appropriate 3D-printed guides, which can help to control clinical procedures based on the initial planning.

CLINICAL SIGNIFICANCE

By following the proposed step-by-step workflow, clinicians can achieve predictable results through an interdisciplinary approach, guiding both the periodontal plastic surgery and the restorative treatment after an individualized CAD/CAD procedure for 3D-printed guides.

Superimposition of intraoral scans of an edentulous arch with implants and implant-supported provisional restoration, implementing a novel implant prosthetic scan body

Purpose To describe a technique utilizing a novel prosthetic scan body, that assists the accurate merging of multiple scans (intra- and extraoral) of the interim prosthesis and edentulous arch with dental implants, during rehabilitation with a fixed implant-supported prosthesis.Methods Intraoral scanning (Trios 3, 3Shape) of an interim implant-supported prosthesis was performed, subsequently followed by another scan, using five scan bodies, placed onto the implant abutments (SRA, Bone level, Straumann AG). Successively, the newly designed prosthetic scan bodies were attached to the abutment copings of the interim prosthesis, for extraoral scanning. Utilizing an implant library designed for the prosthetic scan body, the three scans were merged, providing all the necessary information for the digital design and fabrication of the fixed implant-supported prosthesis.Conclusions The described clinical technique enabled effective and accurate superimposition of intra- and extraoral scans of the implant prosthesis. Superimposed data, including that of the position of dental implants and anatomy of soft tissue, provided essential information for the fabrication of a definitive implant-supported prosthesis. The novel prosthetic scan bodies attached to the implant prosthesis, assisted in merging intra- and extraoral scans, thus facilitating the rehabilitation of maxillary and/or mandibular edentulous dental arches. Further research is required to assess the accuracy of the proposed technique.

Perception of smile attractiveness among laypeople and orthodontists regarding the buccal corridor space, as it is defined by the eyes. An innovated technique

OBJECTIVE

To investigate whether there is a relationship between the distance between the iris and pupil with the ideal size of buccal corridors.

MATERIALS AND METHODS

A full-portrait image of a male Caucasian was used to create a set of 11 digitally modified images with different buccal corridor space. A web-based cross-sectional study was designed and distributed via an online survey to 200 laypeople and 200 orthodontists to assess image attractiveness, using a Visual analogue scale. For the statistical analysis, Wilcoxon signed-rank and Mann-Whitney U tests were used. The significance level was set at p < 0.05.

RESULTS

The response rate for laypeople was 70% (n = 139), while the rate for orthodontists was 73% (n = 146). For the layperson group, the maximum smile attractiveness score was 10% of buccal width reduction, compared to the iris-pupillary distance, while for the orthodontists, it was 20%. The attractiveness of the smile was significantly reduced in both groups when the buccal corridor width was increased in comparison to the iris-pupillary distance.

CONCLUSION

The length between the mesial part of the iris and the distal of the pupil, may constitutes a landmark for the estimation of the desired width of the buccal corridor.

CLINICAL RELEVANCE

Inter iris-pupillary distance can be the starting point in the smile designing process, in order to perform a facial driven selection of buccal corridor size.

Occlusal caries detection on 3D models obtained with an intraoral scanner. A validation study

OBJECTIVES

To evaluate the diagnostic performance of visual caries assessment on 3D dental models obtained using an intraoral scanner and to compare it with the performance of the clinical visual inspection.

METHODS

Fifty-three permanent posterior teeth scheduled for extraction were randomly selected and included in this study. One to three independent examination sites on the occlusal surface of each tooth were clinically inspected using International Caries Detection and Assessment System (ICDAS) criteria. Afterwards, the examined teeth were scanned intraorally with a 3D intraoral scanner (TRIOS 4, 3Shape TRIOS A/S, Copenhagen, Denmark) using white and blue-violet light (415 nm wavelength) to capture the colour and fluorescence signal from the tissues. Six months after the clinical examination, the same examiner conducted the on-screen assessment of the obtained 3D digital dental models at the selected examination sites using modified ICDAS criteria. Both tooth colour and fluorescence texture with high resolution were assessed. Lastly, an independent examiner conducted the histological examination of all teeth after extraction. Using histology as the reference test, Sensitivity (SE), Specificity (SP), Accuracy (ACC), area under the Receiver Operating Characteristic (ROC) curve, and Spearman's correlation coefficient were calculated for the clinical and on-screen ICDAS assessments.

RESULTS

The ACC values of the evaluated methods varied between 0.59-0.79 for initial caries lesions and 0.77-0.99 for moderate-extensive caries lesions. Apart from SE values corresponding to caries in the inner half of enamel, no significant difference was observed between clinical visual inspection and on-screen assessment. In addition, no difference was found in the assessment of 3D models with tooth colour alone or supplemented with fluorescence for all the evaluated diagnostic measures.

CONCLUSIONS

On-screen visual assessment of 3D digital dental models with tooth colour or fluorescence showed a similar diagnostic performance to the clinical visual inspection when detecting and classifying occlusal caries lesions on permanent teeth.

CLINICAL SIGNIFICANCE

3D intraoral scanning can aid the detection and classification of occlusal caries as part of patient screening and can potentially be used in remote caries assessment for clinical and research purposes.

Reverse scan body: A complete digital workflow for prosthesis prototype fabrication

PURPOSE

To assess the accuracy of fit of prosthesis prototypes fabricated via a complete digital workflow protocol with a reverse scan body skipping intraoral scanning for implant data acquisition.

MATERIALS AND METHODS

A maxillary stone cast with four multiunit abutment implant analogs (Screw-Retained Abutments, Institut Straumann AG, Basel, Switzerland) with adequate anteroposterior spread simulated a common clinical patient situation. This stone cast served as the master cast and an interim screw-retained prosthesis was fabricated on it. Novel reverse scan bodies were connected to the interim prosthesis, and extraoral scanning was performed with a white light intraoral scanner. The produced standard tessellation language (STL) files were then imported to computer-assisted design software and after the digital design, the STL file was exported to a computer-assisted machining milling machine and a three-dimensional (3D) printer to produce a total of 50 milled and 50 printed fixed complete denture prototypes, respectively. Two clinicians assessed the accuracy of fit of each digitally fabricated prosthesis prototype on the master cast, utilizing the screw-resistance test and radiographic evaluation. Out of the 100 prototypes, 94% (94/100) were fitting accurately. Fisher's exact test was used to test the difference among the groups. The test revealed statistically significant results (p = 0.027).

RESULTS

Out of the 50 digitally fabricated milled prosthesis prototypes, 50 (100%) presented with accurate fit under in vitro assessment. Out of the 50 digitally fabricated 3D printed prototypes, 44 (88%) presented with accurate fit under in vitro assessment.

CONCLUSIONS

Accurately fitting digitally fabricated prosthesis prototypes can be milled after extraoral scanning with reverse scan bodies without intraoral implant data acquisition.

Digitally designed reduction guide to correct proclined anterior teeth: An aid before fabricating trial restorations

Restoring teeth with ceramic laminate veneers is most often an additive procedure. However, when proclined anterior teeth are being treated, a misfitting silicone matrix will lead to inaccurate trial restorations, affecting evaluation of the definitive esthetic result and leading to inaccurate definitive preparations. Using the digital technology, a 3-dimensionally printed reduction guide can be used to remove the proclined areas as the first step before trial restorations. Then, the trial restorations and made and then the definitive preparations made through them.

Digital selection of composite resin shade using cross polarized photography and a standardized white balance gray reference card

Purpose

The aim of the present case report was to describe, through a clinical case, a step-by-step technique, for the digital selection of composite resin shades using cross polarization and white balance employing a standardized reference card.

Case Description

After intraoral impression, a digital diagnostic wax up was developed. A 3D printed cast was used to fabricate a lingual polyvinyl siloxane matrix. First a cross-polarized image of the contralateral central incisor was taken in RAW format, using a gray reference card. The digital image was manipulated using this card as a reference, to obtain reliable color values. The obtained color values, from the contralateral central incisor, were used in order to digitally find the closest combination of enamel and dentin shades between various composite systems. The values of a combination of shades of composite systems, was captured using cross-polarized images, with a gray reference card, after digital image manipulation of composite specimens, which have been created for this purpose.

Conclusions

Digital evaluation and selection of composite resin system and shade, using a white balance reference card assisted by cross polarized photography, could help achieving more predictable outcomes using the stratification technique with composites. Key words:Restoration shade, composite color, composite resin, direct restoration, digital protocol.

Efficacy of non-hydrogen peroxide mouthrinses on tooth whitening: An in vitro study

OBJECTIVES

To evaluate the tooth whitening efficacy of non-hydrogen peroxide containing mouthrinses.

METHODS

Forty incisors were randomly assigned into four groups. Four whitening mouthrinses, Oral-B 3D White Luxe/Procter & Gamble (WL), Listerine Advanced White/Johnson & Johnson (AW), Colgate Max White/Colgate (MW), and iWhite Whitening Mouthwash/Sylphar (iW), were used over a four-week period. Color changes of L*, a*, b*, ΔE*_ab , and ΔE₀₀ , were recorded by a digital spectrophotometer (Spectroshade Micro/Mht), at baseline and intermediate week-intervals. Data were statistically analyzed using repeated measures ANOVA at α = 0.05.

RESULTS

The first-week mean change of L* was 0.76 and significantly different from the baseline for all solutions, without any further changes. Correspondingly, a* decreased by -0.36, while b* increased by 0.48, contributing to a color change of 1.15 ΔE*_ab or 0.91 ΔE₀₀ . No differences were found among the solutions in respect to color-parameter changes (p > 0.05). Differences among time intervals were significant (p < 0.05) and mainly observed between the baseline and the following week-measurements. There was no statistically significant time-solution interaction (p > 0.05).

CONCLUSIONS

Non-hydrogen peroxide whitening mouthrinses, slightly contribute to tooth whitening, by removing superficial staining, without any further tooth bleaching effect.

CLINICAL SIGNIFICANCE

Non-hydrogen peroxide containing whitening mouthrinses, despite having a quick initial action, reach their ceiling relatively soon. Their effectiveness is barely perceptible and definitely inferior to other professional tooth bleaching methods. Thus, they can only be considered as a supplementary way of keeping teeth whiter, mainly by preventing recurrent tooth discoloration.

Influence of lightness difference of single anterior tooth to smile attractiveness

OBJECTIVES

To evaluate the influence of lightness difference of a single anterior maxillary tooth on difference smile attractiveness.

METHODS

A frontal view full-portrait image of a smiling male Caucasian, was digitally modified altering a single tooth, creating a series of images with varying lightness (ΔL) for the maxillary central, lateral and canine. A total of 160 participants (80 dentists, 80 laypersons) were asked to fill out a Visual Analog Scale questionnaire for every image recording smile attractiveness.

RESULTS

For central incisors ΔL≥1 negatively affected attractiveness. There was a higher tolerance for lightness mismatch when one lateral incisor is lighter and the same applies when the canine was darker. Difference in lightness affected smile attractiveness both for dentists and laypersons. No difference between males and females was observed for the dentists. For laypersons, females perceived smiles with lightness difference as significantly less attractive compared to males. Dentist's age did not affect smile attractiveness perception. Younger laypersons perceived darker color, as less attractive.

CONCLUSIONS

Changes in lightness of a single anterior tooth significantly affected smile attractiveness in a different way for the central vs lateral vs canine. For the dentists, age and gender did not significantly affect smile perception, in contrast to laypeople.

CLINICAL SIGNIFICANCE

Lightness differences of a single anterior tooth affects smile attractiveness.

Evidence provided for the use of oscillating instruments in restorative dentistry: A systematic review

Oscillating diamond instruments are considered gentle sources for the removal of demineralized tooth hard tissues and the preparation of cavity angles and margins needed in minimally invasive dentistry. However, there is a question if literature provides enough evidence for their efficacy in restorative dentistry procedures. A literature search until May 2016 was conducted, using PubMed, Scopus, and The Cochrane Central Register of Controlled Trials databases. The quality of the studies was assessed using the recommendation of the Oxford Centre for Evidence-based Medicine. Fifty-five studies were finally included in the study. Of which, 78.2% of them were laboratory studies and only 21.8% were clinical studies. The strength of recommendation was 5 for most of them and D their grade of evidence. Bond strength of adhesives on surfaces prepared with these instruments, effective caries removal and cutting characteristics of the oscillating instruments were the main targets of the studies. Conventional diamond, steel, and chemical vapor deposition diamond tips and systems based on abrasive slurry were the oscillating tips, used in different studies. The strength of recommendation and grade of evidence of the studies were low. Although these devices seem to be useful for many clinical situations, there is a need for more well-structured evidence-based studies with more widely accepted procedures and common devices, to have more meaningful results and conclusions of higher strength.

Evaluation of dental explorer and visual inspection for the detection of residual caries among Greek dentists

Objectives

The objective of this study was to assess the effect of the operator's degree of clinical experience on the residual caries diagnosis through visual inspection and tactile sensation.

Materials and Methods

The participants were asked about the years of their clinical practice, any further training concerning cariology, their familiarity with the minimal invasive philosophy, and the techniques that they use to remove dental caries and detect when to stop the removal of carious tissues. In addition, an in vitro diagnostic test was conducted. Carious teeth were excavated to a level selected in random. Teeth were examined by each participant individually. Initial examination was performed by visual inspection. Subsequently, a dental explorer was used concerning the potential need for further removal of dental tissues. A sample of 380 dentists and dental school students were selected for the purposes of this study.

Results

Dental students presented statistically significant better sensitivity, than dentists from both age groups, during both visual inspection and tactile sensation of residual caries. Participants' ability to diagnose residual caries during cavity preparation was independent of their years of experience.

Conclusions

During the removal of carious lesions, with the goal of limiting the sacrifice of healthy structures and the leftover of residual caries, clinicians should combine a selective removal technique and the attentive visual inspection, with at least one further diagnostic method, aside from the dental explorer. Tactile examination of residual caries solely with the dental explorer must be used with attention.

Oral lymphoepithelial cyst: A clinicopathological study of 26 cases and review of the literature

Introduction

Τo describe the clinicopathological features of 26 oral lymphoepithelial cysts (LECs) and review the literature.

Material and Methods

Twenty-six cases of oral LECs diagnosed during a 37-year period were retrospectively collected. The patients’ gender and age, as well as the main clinical features of the cysts were retrieved from the requisition forms. The main microscopic features were recorded after reevaluation of all cases. Pubmed and Google Scholar electronic databases were searched with the key word “oral LEC”. Inclusion criteria were the microscopic confirmation of LEC diagnosis and the report at least two of three main clinical features (gender, age and cyst’s location).

Results

The 26 oral LECs represented 0.08% of 31,564 biopsies accessioned during the study period. They affected 25 patients, 14 females and 11 males with a mean age of 33.04±9.81 years. They appeared as smooth (92%) nodules, with soft (24%) or firm (76%) consistency and normal (28%), yellow to normal (20%), yellow (32%) or white (20%) hue, in the tongue (69.23%) or the floor of mouth (30.77%). They were covered by parakeratinized squamous (92.31%) or non-keratinized (7.69%) epithelium and contained desquamated epithelial cells, amorphous eosinophilic material and/or inflammatory cells (100%). The lymphoid tissue surrounded the cystic cavity partially (34.62%) or completely (65.38%), often in a follicular pattern with prominent germinal centers (53.85%). Literature review yielded 316 cases of oral LECs derived from 25 case reports, 3 case studies/retrospective studies with detailed information for each case and 7 studies with summarized data.

Conclusions

Oral LEC is a pathologic entity with discrete clinical presentation that is, however, commonly misdiagnosed in clinical practice as other, mostly benign, entities. Its pathogenesis remains obscure, as its clinicopathologic features are consistent with both theories suggested up to date.

Key words:Oral lymphoepithelial cyst; developmental cyst; non odontogenic cyst; lymphoid tissue; oral tonsil.