Bioadhesive microspheres for ophthalmic administration of acyclovir

The bioavailability of acyclovir to the ophthalmic epithelium is low and when the drug is administered in ophthalmic ointment it must be applied every four hours. An emulsification technique has been used to prepare acyclovir-loaded chitosan microspheres with the aim of promoting the prolonged release of drug and increasing its ocular bioavailability. The microparticulate drug-delivery systems obtained have been characterized for their morphology and physicochemical characteristics by in-vitro dissolution tests and in-vivo ocular administration to rabbits. The results show that the microspheres obtained are always quite small--the diameters of 90% of the particles are < or = 25 microns (i.e. d 90% never exceeds 25 microns) and physicochemical characterization shows that the drug is homogeneously dispersed in an amorphous state inside the microspheres. The in-vitro dissolution profile of acyclovir from chitosan microspheres is slower than that for the raw drug. Results from in-vivo ocular administration of acyclovir-loaded microspheres to the rabbit eye show prolonged high concentrations of acyclovir and increased AUC values. The microparticulate drug-carrier seems a promising means of topical administration of acyclovir to the eye.

Periodontal delivery of ipriflavone: new chitosan/PLGA film delivery system for a lipophilic drug

The aim of the present work was to design a film dosage form for sustained delivery of ipriflavone into the periodontal pocket. For this purpose, monolayer composite systems made of ipriflavone loaded poly(D,L-lactide-co-glycolide) (PLGA) micromatrices in a chitosan film form, were obtained by emulsification/casting/evaporation technique. Multilayer films, made of three layers of polymers (chitosan/PLGA/chitosan), were also prepared and compared to monolayer films for their "in vitro" characteristics. Morphology and physico-chemical properties of the different systems were evaluated. The influence of pH, ionic strength and enzymatic activity on film degradation, was also investigated. Significant differences in swelling, degradation and drug release were highlighted, depending on film structure and composition. In vitro experiments demonstrated that the composite micromatricial films represent a suitable dosage form to prolong ipriflavone release for 20 days.

Effect of nanoparticle encapsulation on the photostability of the sunscreen agent, 2-ethylhexyl-p-methoxycinnamate

The aim of this study was to investigate the influence of nanoparticle-based systems on the light-induced decomposition of the sunscreen agent, trans-2-ethylhexyl-p-methoxycinnamate (trans-EHMC). Ethylcellulose (EC) and poly-D,L-lactide-co-glycolide (PLGA) were used as biocompatible polymers for the preparation of the particulate systems. The "salting out" method was used for nanoparticle preparation and several variables were evaluated in order to optimize product characteristics. The photodegradation of the sunscreen agent in emulsion vehicles was reduced by encapsulation into the PLGA nanoparticles (the extent of degradation was 35.3% for the sunscreen-loaded nanoparticles compared to 52.3% for free trans-EHMC) whereas the EC nanoparticle system had no significant effect. Therefore, PLGA nanoparticles loaded with trans-EHMC improve the photostability of the sunscreen agent.

Study on glycolic acid delivery by liposomes and microspheres

Glycolic acid is used in many cosmetic products as exfoliant and moisturizer. Unfortunately, the greater glycolic acid cosmetic benefits the greater is the potential for skin irritation as far as burning. The aim of this work was to investigate the feasibility of topical controlled delivery systems loading glycolic acid in order to optimize the acid cosmetic properties lowering its side effects. For this purpose different types of microparticulate systems have been evaluated: liposomes, liposomes modified by chitosan addition and chitosan microspheres. Liposomes, composed of phosphatidylcholine and cholesterol (1:1 molar ratio) and with different glycolic acid/lipid molar ratio, were prepared by reverse phase evaporation method. Two types of interaction between liposomes and chitosan were investigated: chitosan addition into lipidic bilayer during liposome preparation and coating of already formed liposomes with chitosan. Glycolic acid loaded chitosan microspheres were prepared by the dry-in-oil emulsion method. The microparticulate systems were morphologically characterized by electron microscopy and particle size analysis. In vitro dissolution tests were performed to evaluate the feasibility of microparticulate systems in modulating glycolic acid release. The results obtained show that liposomes are always suitable to modulate glycolic acid release and that the best condition to achieve this control is obtained by the liposomal systems in which glycolic acid/lipid molar ratio is 5:1. Further significant release control is obtained by addition of chitosan into the liposomes, while chitosan microspheres are not able to control glycolic acid release even after crosslinking.

Long-term release of clodronate from biodegradable microspheres

This paper describes the formulation of a biodegradable microparticulate drug delivery system containing clodronate, a bisphosphonate intended for the treatment of bone diseases. Microspheres were prepared with several poly(D,L-lactide-co-glycolide) (PLGA) copolymers of various molecular weights and molar compositions and 1 poly(D,L-lactide) (PDLLA) homopolymer by a water-in-oil-in-water (w/o/w) double emulsion solvent evaporation procedure. Critical process parameters and formulation variables (ie, addition of stabilizing agents) were evaluated for their effect on drug encapsulation efficiency and clodronate release rate from microparticles. Well-formed clodronate-loaded microspheres were obtained for all polymers by selecting suitable process parameters (inner water/oil volume ratio 1:16, temperature-raising rate in the solvent evaporation step 1 degree C/min, 2% wt/vol NaCl in the external aqueous phase). Good yields were obtained in all batches of clodronate microspheres (above 60%); drug encapsulation efficiencies ranged between 49% and 75% depending on the polymer used. Clodronate release from all copolymer microspheres was completed in about 48 hours, while those from PDLLA microspheres required about 20 days. The change of microsphere composition by adding a surfactant such as Span 20 or a viscosing agent such as carboxymethylcellulose extended the long-term release up to 3 months. Clodronate was successfully entrapped in PLGA and PDLLA microspheres, and drug release could be modulated from 48 hours up to 3 months by suitable selection of polymer, composition, additives, and manufacturing conditions.

Different molecular weight chitosan microspheres: influence on drug loading and drug release

Influence of chitosan molecular weight on drug loading and drug release of drug-loaded chitosan microspheres was studied. Chitosans of 70,000 (LC), 750,000 (MC), and 2,000,000 (HC) molecular weight were employed alone or as mixtures (HC/LC 1:1-1:2 w/w). Ketoprofen (ket) was chosen as the model drug to be encapsulated. Microspheres characterized by different theoretical polymer/drug ratios were prepared (2:1, 1:1, 1:2 w/w). Satisfactory ket contents were obtained for all batches of chitosan microspheres with the theoretical polymer/drug ratio 1:2 w/w; microspheres made of HC/LC (1:2 w/w) were characterized by good drug content and encapsulation efficiency independent by polymer/drug ratio. Prepared chitosan microparticulate delivery systems can modulate ket release within 48 hr. Microspheres consisting of HC/LC (1:2 w/w) were the most suitable formulation in controlling drug release.

gamma-Irradiation of PEGd,lPLA and PEG-PLGA multiblock copolymers. I. Effect of irradiation doses

To evaluate the effects of different gamma irradiation doses on PEGd,lPLA and PEG-PLGA multiblock copolymers. The behaviour of the multiblock copolymers to irradiation was compared to that of PLA, PLGA polymers. PEGd,lPLA, PEG-PLGA, PLA and PLGA polymers were irradiated by using a (60)Co irradiation source at 5, 15, 25 and 50 kGy total dose. Characterization was performed on all samples before and after irradiation, by nuclear magnetic resonance (NMR), infrared absorption spectrophotometry (FTIR) and gel permeation chromatography (GPC). The effect of gamma irradiation on polymer stability was also evaluated. Results of NMR and FTIR suggest an increase in -OH and -COOH groups, attributed to scission reactions induced by irradiation treatment. Data of GPC analysis showed that the weight average molecular weight (Mw) of polymer samples decreased with increasing irradiation dose. The extent of Mw degradation expressed as percentage of Mw reduction was more prominent for polymers with high molecular weight as PEGd,lPLA and PLA. The dominant effect of gamma-irradiation on both polymer samples was chain scission. The multiblock copolymer PEGd,lPLA presented higher sensitivity to irradiation treatment with respect to PLA, likely due to the presence of PEG in the matrix. The effect of gamma irradiation continues over a much longer period of time after gamma irradiation has been performed. It is suggested that the material reacts with oxygen to form peroxyl free radicals, which may further undergo degradation reactions during storage after irradiation.

Chitosan glutamate nanoparticles for protein delivery: Development and effect on prolidase stability

PURPOSE

To evaluate the feasibility of exploiting ultrasonication coupled with ionotropic gelation in order to prepare tripolyphosphate (TPP)-chitosan glutamate nanoparticles suitable for the delivery of the enzyme prolidase.

METHODS

All the parameters for the preparation of TPP-chitosan nanoparticles in terms of components weight ratio, ultrasonication conditions and time-saving nanoparticles recovery conditions were optimized. The best formulation was loaded with the prolidase. All the nanoparticles were characterized in terms of morphology, size, polydispersity, zeta-potential, yield of the process and encapsulation efficiency. The in-vitro activity of the prolidase was assessed by capillary electrophoresis (CE).

RESULTS AND CONCLUSIONS

A TPP to chitosan weight ratio of 0.2:1 combined with one ultrasonication cycle (4 min using the probe-type sonifier at 75% power) obtained well-formed nanoparticles of spherical shape, mean size of approximately 365 nm (polydispersity index 0.3) and a + 17.94 mV zeta potential. A satisfactory prolidase encapsulation efficiency (43%) was obtained with a yield of the preparation process of approximately 55%. In vitro study of activity of prolidase, as free enzyme or released from chitosan nanoparticles, highlighted the ability of chitosan to stabilize the enzyme during all the steps of the preparation process and to modulate the enzyme activity up to 48 h.

Enzyme loaded biodegradable microspheres in vitro ex vivo evaluation

Prolidase is a naturally occurring enzyme involved in the final stage of protein catabolism. Deficient enzyme activity causes prolidase deficiency (PD), a rare autosomal recessive inherited disorder whose main manifestations are chronic, intractable ulcerations of the skin, particularly of lower limbs. Although several attempts have been made towards the treatment of this pathology, a cure for this disease has yet to be found. The purpose of this work is to evaluate the possibility of enzyme replacement therapy through prolidase microencapsulation in biodegradable microspheres. The poly(D,L-lactide-co-glycolide) (PLGA) prolidase loaded microparticulate systems have been prepared utilizing the w-o-w double emulsion solvent evaporation method. They have been characterized "in vitro" by morphological analysis, total protein content and an in vitro dissolution test of active protein. "Ex vivo" evaluation of prolidase activity from the microspheres has been performed on cellular extracts of cultured skin fibroblasts from healthy subjects (controls) and from patients affected by PD. The results reported in this work on prolidase from pig kidney (available on the market) demonstrate the positive role of microencapsulation as a process of enzymatic activity stabilization inside PLGA microspheres achieving both in vitro and ex vivo active enzyme release. This formulation can be proposed as a parenteral depot drug delivery system.

Long-term in vivo assessment of bioengineered skin substitutes: a clinical study

The aim of the study was an objective in vivo assessment of skin properties after reconstruction with two artificial dermal substitutes, Integra® and Hyalomatrix®. Twenty-seven patients underwent reconstruction of 36 skin-loss sites with full-thickness skin graft, split-thickness skin graft, Hyalomatrix® bioengineered skin substitute and sequential split-thickness skin graft and Integra® bioengineered skin substitute and sequential split-thickness skin graft. Objective assessments were carried out using three instrumental devices: Multi Probe Adapter System MPA; 22 MHz ultrasound skin scan; and Primos Pico for a three-dimensional (3D) skin scan. The skin parameters under study in our sample were: corneometry, transepidermal water loss, elastometry, colorimetry, skin thickness and 3D skin surface pattern. A skin reconstruction with Hyalomatrix seemed to most closely approach the hydration, transepidermal water loss and skin surface 3D pattern of normal skin. A skin reconstruction with Integra seemed to demonstrate the best skin colour feature and elastic properties. Although no statistically significant differences were observed, the descriptive analysis of the outcomes might suggest a better cell regulation, regenerated extracellular matrix and neoangiogenesis with the use of Hyalomatrix, and the formation of a more elastic regenerated dermis, with overall better physical, mechanical and optical properties, with the use of Integra.

Efficacy of oleuropein against UVB irradiation: preliminary evaluation

Oleuropein, a phenolic compound derived from olive leaves and oil, is known to possess several biological properties, many of which may be attributed to its antioxidant and free radical-scavenging activities. Nevertheless, up to now, the cosmetic activity of this molecule has not been extensively investigated. The aim of this work was to evaluate the cosmetic properties of oleuropein against UVB-induced erythema. To this end, an emulsion and an emulgel containing oleuropein were prepared, applied and evaluated on healthy volunteers who had undergone UVB irradiation to investigate its protective and/or lenitive activity. Protective effect was assayed by application of topical preparations before irradiation and lenitive effect was evaluated after erythema induction. Vitamin E was used as the reference compound. Our study was carried out by using noninvasive techniques to assess specific skin parameters: barrier function, skin colour and microcirculation. Results clearly showed that oleuropein formulations highlighted lenitive efficacy by reducing erythema, transepidermal water loss and blood flow of about 22%, 35% and 30% respectively. The study allowed us to point out the lenitive property of oleuropein, opening the way to further trials to deepen our specific knowledge about this natural molecule, which could be used in association with other active ingredients in cosmetics to repair UV damages.

Evaluation of process parameters involved in chitosan microsphere preparation by the o/w/o multiple emulsion method

Chitosans are interesting biopolymers largely studied for applications in the medical and pharmaceutical fields. In this work, an o/w/o multiple emulsion technique was used for the preparation of hydrophobic drug loaded microspheres. Moreover, the influence of critical variables (concentration of acetic acid in the polymer solution and drug-polymer ratio) on microsphere morphology and drug content was evaluated. Two chitosans of different molecular weights and deacetylation degree were employed; ketoprofen, a non-steroidal anti- inflammatory drug, was chosen as the hydrophobic model drug. The multiple emulsion method produced well-formed microspheres with good yields. Acetic acid concentration in the polymeric solutions influenced particle size and drug content of the microspheres. The highest drug encapsulation efficiencies were obtained for the lowest theoretical drug/chitosan ratio.

Liposomes containing boronophenylalanine for boron neutron capture therapy

In the present work, liposomes loaded with Boronophenylalanine (BPA), with or without stabilization, were formulated for the application in boron neutron capture therapy. BPA was encapsulated into liposomes as a complex with fructose, but also as a free drug in two different pH buffers. The influence of critical variables (cholesterol content, drug:lipid molar ratio, osmotic stress of liposomes containing hyperosmotic drug solution) on liposome morphology and drug content was evaluated. The drug content and dissolution profile of different BPA loaded liposomes were also studied. The physical stability of liposomes in terms of changes in the size distribution in different osmotic pressure buffers and the chemical oxidation of phospholipids during storing conditions were investigated. The encapsulation efficiencies of all formulations were always satisfactory, being between 20-48%; even when the liposomes were exposed to high osmotic stress, the particle size was below 200 nm. The BPA-fructose complex loaded liposomes showed a slower drug release profile.

5-methyl-pyrrolidinone chitosan films as carriers for buccal administration of proteins

The purpose of this research was to investigate 5-methyl-pyrrolidinone chitosan (MPC) films as carriers for buccal delivery of protein drugs. Placebo and protein-loaded MPC films were prepared by casting and were then cross-linked with tripolyphosphate at different pH conditions. Myoglobin (MHb) was chosen as the model protein because its molecular weight is under the permeability limit of the buccal mucosa. The observed characteristics like bioadhesiveness, swelling behavior, and in vitro release of MHb from loaded films furnish information on the functional behavior of these films. The results obtained show that the modulation of MHb release was achieved only through chitosan cross-linking; the best results in release rate control were obtained by cross-linking performed at pH 6.5. Good bioadhesion properties were maintained even with high cross-linking degrees; the swelling index of MHb-loaded films at different cross-linking degrees evaluated at pH 7.4 and pH 6.4 were comparable to those of placebo films. By setting suitable tripolyphosphate cross-linking conditions for MPC films, one can control protein release without affecting bioadhesion.

Intracellular delivery of liposome-encapsulated prolidase in cultured fibroblasts from prolidase-deficient patients

Prolidase is a cytosolic exopeptidase whose deficiency causes the development of a rare autosomal recessive disorder known as Prolidase Deficiency (PD). The main manifestations of PD are intractable ulcerations of the skin, recurrent infections and mental retardation. At this time only a hazardous and expensive chronic therapy based on blood transfusions is the suggested treatment for PD. The aim of this work was to investigate the capability of utilizing liposomes as enzyme carriers: these vesicular systems have been recently evaluated as protein carriers for their potential in terms of "in vivo" localization, drug release and for protein stabilization in biological fluids. Liposomes were prepared, with a 1:1 PC:Col molar ratio with or without DSPE-PEG, by a thin-film hydration. Ex-vivo experiments were performed, incubating prolidase loaded liposomes with cultured fibroblasts from PD patients and from controls, to determine the amount of active enzyme delivered to cells. Evaluation of liposomes toxicity on cultured skin fibroblasts showed that liposomes did not interfere with cellular growth. Results showed that all the active prolidase encapsulated in the liposomes was completely vehiculated inside fibroblasts after 6 days incubation. SEM analysis suggests that prolidase is vehiculated inside the cell through liposome endocytosis.

Preparation and in vitro evaluation of thiolated chitosan microparticles

The objective of this study was to prepare a microparticulate drug delivery system being based on a new thiomer, namely a chitosan 2-iminothiolane conjugate (chitosan-TBA conjugate). Due to thiol groups being immobilized on chitosan, chitosan-TBA conjugate exhibits improved mucoadhesive and permeation enhancing properties. Because of these features microparticulate drug delivery systems based on chitosan-TBA conjugate might be a promising tool for the non-invasive administration of hydrophilic macromolecular drugs. Chitosan-TBA conjugate microspheres were prepared by the emulsification/solvent evaporation method. Fluorescein-isothiocyanate labelled dextran (FITC-dextran) was chosen as a model hydrophilic drug. Microspheres have been characterized by morphological analysis, thiol group content, swelling behaviour, polymer degradation drug load determination, dissolution test and mucoadhesion studies. Results reported in this work demonstrated the possibility to obtain stable microspheres without cross-linking agents. Thiolated chitosan microspheres seem to be more stable in aqueous media with respect to unmodified chitosan. The degradability by lysozyme appears quite similar for both polymers, showing that chemical modification does not influence the biodegradable properties of chitosan. Microspheres were able to control the drug release for at least 1 h, exhibiting comparatively strong mucoadhesive properties. The chitosan-TBA conjugate microparticles remain on the mucosa in a 2.5-fold higher concentration with respect to unmodified chitosan microparticles. These data suggest that chitosan-TBA conjugate microspheres have the potential to be used as a mucoadhesive drug delivery system.

In vivo evaluation of the effectiveness of biocellulose facial masks as active delivery systems to skin

Background

In recent years, bacterial cellulose (BC), or biocellulose, a natural polymer synthesized by certain bacteria, has attracted great interest in dermatology and cosmetic applications.

Several bioactive ingredients are currently loaded into BC masks. However, only a few studies have reported the effectiveness of such delivery systems.

Aim

The aim of this study was to evaluate the effect on skin parameters of three biocellulose masks formulated to have different cosmetic effects (anti‐aging, lifting, and cell renewal). In particular, skin moisturizing, skin color, skin viscoelastic properties, skin surface smoothness, wrinkle reduction, dermal homogeneity, and stratum corneum renewal were evaluated.

Materials and methods

The study involved 69 healthy Caucasian female volunteers between 25 and 64 years, who were divided into three different studies. Biocellulose facial masks were applied using the split‐face method three times a week for 4‐8 weeks depending on the study.

Results

The results obtained from this work highlight that biocellulose masks are very well tolerated. A significant decrease in skin roughness and wrinkle breadth, and an improvement in dermal homogeneity and firmness, was observed after 2 months of treatment with “anti‐aging” masks. A significant improvement in skin firmness and elasticity was observed after 1 month of treatment with “lifting” masks. Furthermore, a 1‐month treatment with “cell renewal” masks promoted the production of new skin cells through a mild exfoliating action.

Conclusions

This study highlights that biocellulose masks are effective delivery systems to successfully release into the skin several types of active compounds exerting many beneficial effects.

The role of emerging techniques in the investigation of prolidase deficiency: From diagnosis to the development of a possible therapeutical approach

The aim of the present article is to review the efforts performed in the past two decades by numerous research groups for the development of methods that allow a correct diagnosis of prolidase deficiency (PD), a rare autosomal recessive disorder and for the rationalization of a possible therapeutic intervention on these patients. In particular, the interest of the reader is focused on the application of capillary electrophoresis (i) for the detection of biological markers that reflect the pathological feature of the disease and (ii) for the determination of the efficiency of a carrier system in delivering prolidase inside cells in a possible therapy based on enzyme replacement.

PLGA microspheres for oral osteopenia treatment: preliminary "in vitro"/"in vivo" evaluation

The aim of this work was to prepare and to evaluate "in vitro"/"in vivo" microspheres based on poly(D,L-lactide-co-glycolide) copolymers containing ipriflavone, for the local treatment of oral bone loss. The first objective was the preparation and "in vitro" characterization of ipriflavone loaded microspheres, by emulsion/solvent evaporation method. Process parameters such as drug:polymer weight ratio, and molecular weight of copolymers, were also investigated. The second objective was to elaborate a suitable animal model of mandibular osteoporosis, to evaluate the efficacy of these microparticulate drug delivery systems. "In vivo" experiments were carried out on female rats, in which oral osteopenia was induced by gonadectomy and molar avulsion. Morphometric analysis of mandibular segment were carried out to quantify the development of oral osteopenia and the efficacy of drug loaded microspheres. Results showed that ipriflavone loaded PLGA microspheres can be successfully obtained with good "in vitro" characteristics, utilizing the emulsification/solvent evaporation method. "In vivo" experiments revealed that local administration of microspheres produced only mild inflammation on the injection site. Morphometric analyses showed, at the level of the third molar, a slight increase in spongy and total bone mass on rat jaw treated with microspheres with respect to control. Control animals exhibited a scarce degree of osteopenia demonstrating that this animal model is not suitable for this purpose.

N-acetylcysteine (NAC) and Its Role in Clinical Practice Management of Cystic Fibrosis (CF): A Review

N-acetylcysteine is the acetylated form of the amino acid L-cysteine and a precursor to glutathione (GSH). It has been known for a long time as a powerful antioxidant and as an antidote for paracetamol overdose. However, other activities related to this molecule have been discovered over the years, making it a promising drug for diseases such as cystic fibrosis (CF). Its antioxidant activity plays a key role in CF airway inflammation and redox imbalance. Furthermore, this molecule appears to play an important role in the prevention and eradication of biofilms resulting from CF airway infections, in particular that of Pseudomonas aeruginosa. The aim of this review is to provide an overview of CF and the role that NAC could play in preventing and eliminating biofilms, as a modulator of inflammation and as an antioxidant, restoring the redox balance within the airways in CF patients. To do this, NAC can act alone, but it can also be used as an adjuvant molecule to known drugs (antibiotics/anti-inflammatories) to increase their activity.