[Geographic environment-related research advances on children's myopia: intraocular and environmental exposure factors and analytical methods]

Myopia has become a global phenomenon, transitioning into a significant public health issue of worldwide reach. The escalating prevalence of myopia may lead to an increase in the incidence of related complications, potentially resulting in irreversible vision damage for individuals. This not only causes considerable economic strain on societies but also poses a serious threat to vital sectors like national defense. This review outlines various external and internal exposure factors related to childhood myopia. It places particular focus on the analysis of the interaction between geographical environmental factors and internal exposure factors, and examines the limitations of applying traditional methods in studying the relationship between childhood myopia and geographical environmental factors. The paper also introduces two spatial regression methodologies based on frequency estimation and Bayesian estimation, summarizing their feasibility and merits when applied in the study of external exposure elements related to childhood myopia. Finally, it provides a fresh perspective on regional childhood myopia prevention strategies that are conscious of geographical environmental factors.

High mono-rhamnolipids production by a novel isolate Pseudomonas aeruginosa LP20 from oily sludge: characterization, optimization, and potential application

This study aims to isolate microbial strains for producing mono-rhamnolipids with high proportion. Oily sludge is rich in petroleum and contains diverse biosurfactant-producing strains. A biosurfactant-producing strain LP20 was isolated from oily sludge, identified as Pseudomonas aeruginosa based on phylogenetic analysis of 16S rRNA. High-performance liquid chromatography-mass spectrometry results indicated that biosurfactants produced from LP20 were rhamnolipids, mainly containing Rha-C8-C10, Rha-C10-C10, Rha-Rha-C8-C10, Rha-Rha-C10-C10, Rha-C10-C12:1, and Rha-C10-C12. Interestingly, more mono-rhamnolipids were produced by strain LP20 with a relative abundance of 64.5%. Pseudomonas aeruginosa LP20 optimally produced rhamnolipids at a pH of 7.0 and a salinity of 0.1% using glycerol and nitrate. The culture medium for rhamnolipids by strain LP20 was optimized by response surface methodology. LP20 produced rhamnolipids up to 6.9 g L-1, increased by 116%. Rhamnolipids produced from LP20 decreased the water surface tension to 28.1 mN m-1 with a critical micelle concentration of 60 mg L-1. The produced rhamnolipids emulsified many hydrocarbons with EI24 values higher than 56% and showed antimicrobial activity against Staphylococcus aureus and Cladosporium sp. with inhibition rates 48.5% and 17.9%, respectively. Pseudomonas aeruginosa LP20 produced more proportion of mono-rhamnolipids, and the LP20 rhamnolipids exhibited favorable activities and promising potential in microbial-enhanced oil recovery, bioremediation, and agricultural biocontrol.

Hybrid Quantum Mechanical/Molecular Mechanical Methods For Studying Energy Transduction in Biomolecular Machines

Hybrid quantum mechanical/molecular mechanical (QM/MM) methods have become indispensable tools for the study of biomolecules. In this article, we briefly review the basic methodological details of QM/MM approaches and discuss their applications to various energy transduction problems in biomolecular machines, such as long-range proton transports, fast electron transfers, and mechanochemical coupling. We highlight the particular importance for these applications of balancing computational efficiency and accuracy. Using several recent examples, we illustrate the value and limitations of QM/MM methodologies for both ground and excited states, as well as strategies for calibrating them in specific applications. We conclude with brief comments on several areas that can benefit from further efforts to make QM/MM analyses more quantitative and applicable to increasingly complex biological problems.

Improving Rhamnolipids Biosynthesis in Pseudomonas sp. L01 through Atmospheric and Room-Temperature Plasma (ARTP) Mutagenesis

Biosurfactants have significant applications in various industries, including microbial-enhanced oil recovery (MEOR). While the state-of-the-art genetic approaches can generate high-yield strains for biosurfactant production in fermenters, there remains a critical challenge in enhancing biosurfactant-producing strains for use in natural environments with minimal ecological risks. The objectives of this work are enhancing the strain's capacity for rhamnolipids production and exploring the genetic mechanisms for its improvement. In this study, we employed atmospheric and room-temperature plasma (ARTP) mutagenesis to enhance the biosynthesis of rhamnolipids in Pseudomonas sp. L01, a biosurfactant-producing strain isolated from petroleum-contaminated soil. Following ARTP treatment, we identified 13 high-yield mutants, with the highest yield of 3.45 ± 0.09 g/L, representing a 2.7-fold increase compared to the parent strain. To determine the genetic mechanisms behind the enhanced rhamnolipids biosynthesis, we sequenced the genomes of the strain L01 and five high-yield mutants. A comparative genomic analysis suggested that mutations in genes related to the synthesis of lipopolysaccharides (LPS) and the transport of rhamnolipids may contribute to the improved biosynthesis. To the best of our knowledge, this is the first instance of utilizing the ARTP approach to improve rhamnolipid production in Pseudomonas strains. Our study provides valuable insights into the enhancement of biosurfactant-producing strains and the regulatory mechanisms of rhamnolipids biosynthesis.

[A case of delayed peripheral neuropathy caused by diquat poisoning]

Diquat is a kind of conductive contact-killing herbicides. The damage of central nervous system is relatively common, but the peripheral neuropathy caused by diquat has not been reported yet. In September 2021, we treated a patient with diquat poisoning. During the hospitalization, the patient was diagnosed with peripheral neuropathy. Therapy for peripheral nerve injury was given on the basis of conventional treatment of poisoning. The patient was discharged after his condition was stable. The follow-up showed that the peripheral neuropathy of patient was better than before. According to the condition of this patient, it is suggested that we should not only protect the function of gastrointestinal tract, liver, kidney, and central nervous system early, but should also pay attention to the damage of peripheral nervous system in clinical work. We should intervene earlier to improve the prognosis of patients.

Intradural Extramedullary Nerve Sheath Myxoma of the Cervical Spine: A Case Report and Review of Literature

Background: Nerve sheath myxoma is a rare benign soft tissue tumor. Intraspinal nerve sheath myxomas are rare. Only 8 cases of intraspinal nerve sheath myxoma have been reported to date, and no case of nerve sheath myxoma has been reported in the cervical spinal canal. Herein, we reported the first case of intradural extramedullary nerve sheath myxoma in the cervical spinal canal of a 57-year-old man, including its complete clinical course and radiological findings.

Case Presentation: A 57-year-old male patient presented with numbness in his left finger without any obvious inducement for 3 years. CT and contrast-enhanced magnetic resonance imaging (MRI) of the spine were performed. Based on the radiological examinations, a diagnosis of schwannoma was initially made. However, nerve sheath myxoma was finally confirmed by histopathological and immunohistochemical examinations. Complete tumor excision at the C1-2 level was performed. Then, the patient recovered well, and the numbness of his left finger disappeared during the later follow-up after the surgery.

Conclusion: Nerve sheath myxoma should receive diagnostic consideration for an extramedullary subdural lesion that is a clear boundary mass characterized by isointensity on T1-weighted images, heterogeneous intensity on T2-weighted images, obvious peripheral enhancement, and a growing tendency toward the intervertebral foramen.

Glycerol or crude glycerol as substrates make Pseudomonas aeruginosa achieve anaerobic production of rhamnolipids

BACKGROUND

The anaerobic production of rhamnolipids is significant in research and application, such as foamless fermentation and in situ production of rhamnolipids in the anoxic environments. Although a few studies reported that some rare Pseudomonas aeruginosa strains can produce rhamnolipids anaerobically, the decisive factors for anaerobic production of rhamnolipids were unknown.

RESULTS

Two possible hypotheses on the decisive factors for anaerobic production of rhamnolipids by P. aeruginosa were proposed, the strains specificity of rare P. aeruginosa (hypothesis 1) and the effect of specific substrates (hypothesis 2). This study assessed the anaerobic growth and rhamnolipids synthesis of three P. aeruginosa strains using different substrates. P. aeruginosa strains anaerobically grew well using all the tested substrates, but glycerol was the only carbon source that supported anaerobic production of rhamnolipids. Other carbon sources with different concentrations still failed for anaerobic production of rhamnolipids by P. aeruginosa. Nitrate was the excellent nitrogen source for anaerobic production of rhamnolipids. FTIR spectra analysis confirmed the anaerobically produced rhamnolipids by P. aeruginosa using glycerol. The anaerobically produced rhamnolipids decreased air-water surface tension to below 29.0 mN/m and emulsified crude oil with EI24 above 65%. Crude glycerol and 1, 2-propylene glycol also supported the anaerobic production of rhamnolipids by all P. aeruginosa strains. Prospects and bottlenecks to anaerobic production of rhamnolipids were also discussed.

CONCLUSIONS

Glycerol substrate was the decisive factor for anaerobic production of rhamnolipids by P. aeruginosa. Strain specificity resulted in the different anaerobic yield of rhamnolipids. Crude glycerol was one low cost substrate for anaerobic biosynthesis of rhamnolipids by P. aeruginosa. Results help advance the research on anaerobic production of rhamnolipids, deepen the biosynthesis theory of rhamnolipids and optimize the anaerobic production of rhamnolipids.

Prognostic value of late gadolinium enhancement in arrhythmogenic right ventricular cardiomyopathy: a meta-analysis

AIM

To assess systematically the prognostic value of cardiac magnetic resonance imaging (CMRI) in patients with arrhythmogenic right ventricular cardiomyopathy (ARVC).

MATERIALS AND METHODS

The full text of studies of the clinical efficacy of late gadolinium enhancement (LGE) in ARVC was retrieved in multiple databases. Stata 14 was adopted for meta-analysis and bias analysis. Heterogeneity was assessed with the I² statistic.

RESULTS

After exclusions, 561 patients were included in five studies, and the eligibility criteria were met. The meta-analysis suggested that there was a significant difference between LGE positive and negative patients with ARVC in all-cause mortality (relative risk [RR] = 4.78, 95% confidence interval [CI] = 1.41, 16.23, p=0.012; p for heterogeneity = 0.692, I² = 0%); major adverse cardiovascular events (MACE) (RR=2.48, 95% CI = 1.24, 4.96, p=0.010; p for heterogeneity = 0.596, I² = 0%); ventricular tachycardia (RR=3.13, 95% CI = 1.69, 5.78, p<0.001; p for heterogeneity = 0.825, I² = 0%); implanted cardiac defibrillators (RR=3.15, 95% CI = 1.69, 5.87], p<0.001; p for heterogeneity = 0.353, I² = 9.4%).

CONCLUSION

LGE in ARVC patients is a predictor of all-cause mortality and MACE.

Morning Serum Cortisol as a Predictor for the HPA Axis Recovery in Cushing's Disease

BACKGROUND

The suppressed hypothalamic-pituitary-adrenal (HPA) axis after successful surgery for Cushing's disease (CD) will recover in almost all patients. We aimed to identify the predictive factors for HPA axis recovery in CD patients with postoperative remission. Design and Methods. This observational retrospective cross-sectional study enrolled 69 CD patients with postoperative remission in Huashan Hospital from 2015 to 2019. All subjects had a detailed clinical evaluation. The low-dose ACTH stimulation test (LDT) was conducted as the gold standard for assessing the HPA axis function.

RESULTS

Peak cortisol in LDT was found only to be positively correlative with morning serum cortisol (MSC) (ρ=0.451, p < 0.001). The MSC was higher (p < 0.001), and the median postoperative course was significantly longer (p=0.025) in the patients with the recovered HPA axis function compared with unrecovered patients. The AUC value of MSC for predicting the recovery of the HPA axis was 0.701, and the optimal cutoff was 6.25 μg/dl (sensitivity 85.19% and specificity 47.62%). Other useful cutoff values were 10.74 μg/dl (specificity 100%) and 4.18 μg/dl (sensitivity 100%). Besides, combined with the postoperative course, the AUC values were higher than MSC alone (0.935 vs. 0.701, p < 0.001).

CONCLUSIONS

MSC is a viable first-step diagnostic predictor for HPA axis recovery in CD patients with postoperative remission. For the patients with cortisol levels between 4.18 and 10.74 μg/dl, a confirmatory test should be conducted. When the MSC level was 10.74 μg/dl or greater, the replacement therapy could be discontinued.

Human adipose-derived mesenchymal stem cells inhibit proliferation and induce apoptosis of human gastric cancer HGC-27 cells

The aim of this study was to explore the effects of human adipose-derived mesenchymal stem cells (ASCs) on the growth of gastric cancer cells in vivo and vitro and its mechanism. ASCs were isolated from abandoned adipose tissues, and the surface markers were identified by flow cytometry. In vitro experiments, HGC-27 cells cultured in ASCs-conditioned medium (CM) were assigned as the experimental group, while HGC-27 cells cultured in normal medium were as the control group. MTT and colony formation assays were performed to detect cell viability and colony formatting ability, respectively. Annexin-V/PI assay, Western blot, and caspase-3 enzyme activity assay were performed to detect cells apoptosis. The isolated ASCs could be differentiated into adipocytes and osteoblasts in vitro. Flow cytometry showed that CD73 and CD105 were positively expressed in HGC-27 cells. Compared with the mice injected HGC-27 cells only, the tumor formation in mice injected both ASCs and HGC-27 cells was significantly smaller (P < 0.05). The colony formation ability in experimental group was 40.09% smaller than control group (P < 0.05) and the cell apoptosis rate in experimental group was higher than the control group (P < 0.05). Furthermore, the expressions of cleaved PARP, cleaved caspase-3 proteins, and caspase-3 enzyme viability in experimental group were significantly higher than those of control group (P < 0.05). In conclusion, ASCs can effectively inhibit the growth of HGC-27 cells by inducing apoptosis.

Athermalization of dual-waveband infrared systems containing diffractive optical elements via optical-digital joint design

Because of material limitations, achieving an athermal design for dual-waveband infrared systems is difficult. This study integrates single-layer diffractive elements to reduce the volume and weight of such a design and introduces optical-digital joint methods to eliminate the impact of low diffraction efficiency. To achieve athermalization, temperature polychromatic integral diffraction efficiency and temperature integral wavelength weight are incorporated in the point spread function (PSF) model. Influence of low diffraction efficiency is eliminated via subsequent algorithm processing. Accordingly, athermal design and processing of a cooled dual-waveband infrared system is achieved and verified via experimental results.

Achromatic annular folded lens with reflective-diffractive optics

This paper proposes an achromatic annular folded lens (AFL) with a reflective-diffractive optical element (RDOE). We derive novel mathematical models of the diffraction efficiency and polychromatic integral diffraction efficiency (PIDE) of the RDOE and an expression for its microstructure height. An AFL with an RDOE made of an optical plastic substrate material is designed in the visible waveband. To minimize the influence of incident angle on the diffraction efficiency and PIDE, the microstructure height is optimized. The design results indicate that the lateral color of the AFL is corrected, the modulation transfer function considering the diffraction efficiency is larger than 0.25 at 111 cycles/mm for all field of views. The hybrid AFL outperforms the conventional refractive imaging system in terms of the system size, volume, and image quality under the same specifications. It can be used in new-generation miniaturized imaging systems.

Design of dual-band infrared zoom lens with multilayer diffractive optical elements

A mid-wave infrared (MWIR)/long-wave infrared (LWIR) dual-band zoom lens design with multilayer diffractive optical elements (MLDOEs) is presented. The mathematical relationship between the substrate material selection for dual-band MLDOE and polychromatic integral diffraction efficiency (PIDE) is deduced in the oblique incident situation, and further, a method for optimal selection of substrate material is proposed to obtain the high PIDE in an incident angle range. In the optimization process, the optimal substrate material combination is selected based on the proposed method, and the principle of lens material replacement is discussed. After optimization, the 5× hybrid dual-band infrared zoom system is obtained, which consists of seven lenses. The modulation transfer function values in all configurations are larger than 0.5 and 0.3 in MWIR and LWIR, respectively. The distortion values are less than 2% both in MWIR and LWIR for all configurations.

Optical athermalization in the visible waveband using the 1+∑ method

In this paper, the 1+∑ method, which is based on the double-lens equivalent model, is proposed to achieve optical athermalization in the visible waveband. The glass in the system was replaced by calculating and analyzing the synthetic weights of the thermal power and chromatic power. A complex aerial camera with long focal length was designed over a temperature difference of 100°C. The results demonstrated that the designed system could maintain good image quality and stable optical performance under large temperature differences.

Effect of the surface roughness on the efficiency of diffractive optical elements

The proposed study aims to investigate the effect of surface roughness on the efficiency of diffractive optical elements (DOEs) used in imaging optical systems. A mathematical model describing the influence of surface roughness on diffraction efficiency and polychromatic integral diffraction efficiency (PIDE) is presented, and its effects are analyzed and simulated. Examples of single-layer DOEs containing PMMA substrate and multi-layer DOEs composed of a combination of PMMA and polycarbonate substrates for each layer used in the visible region are analyzed. The results can be used to analyze the effects of surface roughness on the diffraction efficiency and PIDE of DOEs.

Design of a built-in baffle for a Ritchey-Chretien optical system

A baffle effectively prevents direct rays of stray light from entering an optical system. Existing design methods can result in very long outer baffle lengths, increasing the weight and volume of the optical system, or large secondary mirror baffle sizes, increasing the central obscuration and resulting in the reduction of the illumination beam on the image. To overcome these challenges, a design method for a built-in baffle is presented. The designed built-in baffle for a typical Ritchey-Chretien optical system is compared with a conventionally designed baffle. The results show that when the length of outer baffle is shortened from 3456 to 2349.9 mm, the modulation transfer function (MTF) increases from 0.361 to 0.421 in case 1, and when the length is shortened from 3456 to 1924.2 mm, the MTF increases from 0.361 to 0.408 in case 2. Meanwhile, the stray light suppression capability is close to that of the traditional method.

Optimization method of multilayer diffractive optical elements with consideration of ambient temperature

A method for the optimal design of multilayer diffractive optical elements (MLDOEs) with consideration of ambient temperature is presented to improve the image quality over the entire temperature range. The relationship between diffraction efficiency and temperature is analyzed, and an optimization process of surface relief height for the MLDOEs is given. A practical 3-5 μm athermal hybrid optical system with a double-layer diffractive optical element is designed in the temperature range from -20°C to 60°C, and the image quality of two hybrid optical systems with optimized MLDOE and original MLDOE is compared. The result shows that the comprehensive modulation transfer function is obviously improved in the whole working temperature range. This method can be used during the passive athermalization hybrid optical system design with MLDOEs.

PSF model for diffractive optical elements with improved imaging performance in dual-waveband infrared systems

Single-layer diffractive optical elements (SLDOEs) have advantages in terms of configuration, fabrication, range of angles and cost; however, the diffraction efficiency decreases sharply with wavelength deviating from the design wavelength, especially for dual-waveband imaging, causing apparent image blur. We propose a point spread function (PSF) model affected by the diffraction efficiency, which is called PSF_DOE, and a method of restoring the blurred image to improve imaging performance in dual-waveband infrared systems with an SLDOE. Then, a design example of cooled MWIR and LWIR is presented. Furthermore, imaging simulations with different grades noises and restorations are conducted. Results reveal that the PSF_DOE model can significantly improve the image blur caused by the decreased diffraction efficiency.

Clinical and molecular insights into Glanzmann's thrombasthenia in China

Glanzmann's thrombasthenia (GT) is a rare bleeding disorder characterized by spontaneous mucocutaneous bleeding. The disorder is caused by quantitative or qualitative defects in integrin αIIbβ3 (encoded by ITGA2B and ITGB3) on the platelet and is more common in consanguineous populations. However, the prevalence rate and clinical characteristics of GT in non-consanguineous populations have been unclear. We analyzed 97 patients from 93 families with GT in the Han population in China. This analysis showed lower consanguinity (18.3%) in Han patients than other ethnic populations in GT-prone countries. Compared with other ethnic populations, there was no significant difference in the distribution of GT types. Han females suffered more severe bleeding and had a poorer prognosis. We identified a total of 43 different ITGA2B and ITGB3 variants, including 25 previously unidentified, in 45 patients. These variants included 14 missense, 4 nonsense, 4 frameshift, and 3 splicing site variants. Patients with the same genotype generally manifested the same GT type but presented with different bleeding severities. This suggests that GT clinical phenotype does not solely depend on genotype. Our study provides an initial, yet important, clinical and molecular characterization of GT heterogeneity in China.

Optimal design method on diffractive optical elements with antireflection coatings

The effect of antireflection coatings on diffraction efficiency of diffractive optical elements (DOEs) was studied and the mathematical model of diffraction efficiency affected by antireflection coatings for DOEs is presented. We found antireflection coatings can cause a significant reduction on diffraction efficiency at the designed, or the central wavelength. In order to solve this problem, we proposed a method to keep 100% diffraction efficiency at the designed wavelength by ensuring the 2π phase induced by DOEs and the antireflection coatings. Diffraction efficiency affected by antireflection coatings for DOEs with consideration of antireflection coatings are simulated. Analysis results can be utilized for refractive-diffractive hybrid imaging optical system optimal design and image quality evaluation.

Substrate material selection method for multilayer diffractive optics in a wide environmental temperature range

We present a substrate material selection method for multilayer diffractive optical elements (MLDOEs) to obtain high polychromatic integral diffraction efficiency (PIDE) in a wide environmental temperature range. The extended expressions of the surface relief heights for the MLDOEs are deduced with consideration of the influence of the environmental temperature. The PIDE difference Δη¯(λ) and PIDE change factor F are introduced to select a reasonable substrate material combination. A smaller value of Δη¯(λ) or F indicates a smaller decrease of the PIDE in a wide temperature range, and the corresponding substrate material combination is better. According to the deduced relation, double-layer and three-layer DOEs with different combinations are discussed. The results show that IRG26 and zinc sulfide is the best substrate material combination in the infrared waveband for double-layer DOEs, and polycarbonate is more reasonable than polymethyl methacrylate as the middle filling optical material for three-layer DOEs when the two substrate materials are the same.

Slater Insulator in Iridate Perovskites with Strong Spin-Orbit Coupling

The perovskite SrIrO_{3} is an exotic narrow-band metal owing to a confluence of the strengths of the spin-orbit coupling (SOC) and the electron-electron correlations. It has been proposed that topological and magnetic insulating phases can be achieved by tuning the SOC, Hubbard interactions, and/or lattice symmetry. Here, we report that the substitution of nonmagnetic, isovalent Sn^{4+} for Ir^{4+} in the SrIr_{1-x}Sn_{x}O_{3} perovskites synthesized under high pressure leads to a metal-insulator transition to an antiferromagnetic (AF) phase at T_{N}≥225  K. The continuous change of the cell volume as detected by x-ray diffraction and the λ-shape transition of the specific heat on cooling through T_{N} demonstrate that the metal-insulator transition is of second order. Neutron powder diffraction results indicate that the Sn substitution enlarges an octahedral-site distortion that reduces the SOC relative to the spin-spin exchange interaction and results in the type-G AF spin ordering below T_{N}. Measurement of high-temperature magnetic susceptibility shows the evolution of magnetic coupling in the paramagnetic phase typical of weak itinerant-electron magnetism in the Sn-substituted samples. A reduced structural symmetry in the magnetically ordered phase leads to an electron gap opening at the Brillouin zone boundary below T_{N} in the same way as proposed by Slater.

QM/MM Analysis of Transition States and Transition State Analogues in Metalloenzymes

Enzymology is approaching an era where many problems can benefit from computational studies. While ample challenges remain in quantitatively predicting behavior for many enzyme systems, the insights that often come from computations are an important asset for the enzymology community. Here we provide a primer for enzymologists on the types of calculations that are most useful for mechanistic problems in enzymology. In particular, we emphasize the integration of models that range from small active-site motifs to fully solvated enzyme systems for cross-validation and dissection of specific contributions from the enzyme environment. We then use a case study of the enzyme alkaline phosphatase to illustrate specific application of the methods. The case study involves examination of the binding modes of putative transition state analogues (tungstate and vanadate) to the enzyme. The computations predict covalent binding of these ions to the enzymatic nucleophile and that they adopt the trigonal bipyramidal geometry of the expected transition state. By comparing these structures with transition states found through free energy simulations, we assess the degree to which the transition state analogues mimic the true transition states. Technical issues worth treating with care as well as several remaining challenges to quantitative analysis of metalloenzymes are also highlighted during the discussion.

High diffraction efficiency of three-layer diffractive optics designed for wide temperature range and large incident angle

A mathematical model of diffraction efficiency and polychromatic integral diffraction efficiency affected by environment temperature change and incident angle for three-layer diffractive optics with different dispersion materials is put forward, and its effects are analyzed. Taking optical materials N-FK5 and N-SF1 as the substrates of multilayer diffractive optics, the effect on diffraction efficiency and polychromatic integral diffraction efficiency with intermediate materials POLYCARB is analyzed with environment temperature change as well as incident angle. Therefore, three-layer diffractive optics can be applied in more wide environmental temperature ranges and larger incident angles for refractive-diffractive hybrid optical systems, which can obtain better image quality. Analysis results can be used to guide the hybrid imaging optical system design for optical engineers.

The efficacy of high-intensity, focused ultrasound treatment for non-neoplastic epithelial disorders of the vulva

Non-neoplastic epithelial disorders of the vulva (NNEDV) are common types of vulval lesions. Although corticosteroids represent a first-line treatment for NNEDV, concerns exist about the safety associated with long-term topical corticosteroid use. Recently, several clinical trials have identified high-intensity focused ultrasound (HIFU) as a promising treatment modality for NNEDV. The aim of this multi-center, randomized, controlled clinical trial was to investigate the efficacy of HIFU therapy in women with NNEDV based on histological alterations. We enrolled patients who were clinically diagnosed with NNEDV. They were randomized into 2 treatment groups: 1) halcinonide for 3 months or 2) HIFU once. A total of 123 patients were biopsied both prior to and after the therapy, and 62 and 61 patients were assigned to the HIFU and halcinonide groups, respectively. The histological changes were then analyzed. After the treatments, the therapeutic effects were observed in both groups. Comparing the diagnosis and alterations in lichenoid and sclerotic patterns and in chronic inflammation, we found statistically significant differences. Furthermore, when compared with the halcinonide group, the HIFU group exhibited enhanced curative effects that were statistically significant (P = 0.039). Based on the histological evidence from this randomized, controlled trial, HIFU represents an effective method for the treatment of NNEDV.

Aberration and boresight error correction for conformal aircraft windows using the inner window surface and tilted fixed correctors

A static solution to aberrations and boresight error for tilted conformal aircraft windows at different look angles is reported. The solution uses the inner window surface to correct the window aberrations at a 0° look angle and uses fixed correctors behind the window to correct the residual window aberrations at other look angles. Then, the boresight error for the window at different look angles is corrected by tilting the fixed correctors. The principle of the solution is discussed, and a design example shows that the solution is effective in correcting the aberrations and boresight error for a tilted conformal aircraft window at different look angles.

Draft genome sequence of Paenibacillus sp. strain A2

Paenibacillus sp. strain A2 is a Gram-negative rod-shaped bacterium isolated from a mixture of formation water and petroleum in Daqing oilfield, China. This facultative aerobic bacterium was found to have a broad capacity for metabolizing hydrocarbon and organosulfur compounds, which are the main reasons for the interest in sequencing its genome. Here we describe the features of Paenibacillus sp. strain A2, together with the genome sequence and its annotation. The 7,650,246 bp long genome (1 chromosome but no plasmid) exhibits a G+C content of 54.2 % and contains 7575 protein-coding and 49 RNA genes, including 3 rRNA genes. One putative alkane monooxygenase, one putative alkanesulfonate monooxygenase, one putative alkanesulfonate transporter and four putative sulfate transporters were found in the draft genome.

Rab3A, Rab27A, and Rab35 regulate different events during mouse oocyte meiotic maturation and activation

Rab family members play important roles in membrane trafficking, cell growth, and differentiation. Almost all components of the cell endomembrane system, the nucleus, and the plasma membrane are closely related to RAB proteins. In this study, we investigated the distribution and functions of three members of the Rab family, Rab3A, Rab27A, and Rab35, in mouse oocyte meiotic maturation and activation. The three Rab family members showed different localization patterns in oocytes. Microinjection of siRNA, antibody injection, or inhibitor treatment showed that (1) Rab3A regulates peripheral spindle and cortical granule (CG) migration, polarity establishment, and asymmetric division; (2) Rab27A regulates CG exocytosis following MII-stage oocyte activation; and (3) Rab35 plays an important role in spindle organization and morphology maintenance, and thus meiotic nuclear maturation. These results show that Rab proteins play important roles in mouse oocyte meiotic maturation and activation and that different members exert different distinct functions.

PDK1/Akt/PDE4D axis identified as a target for asthma remedy synergistic with β2 AR agonists by a natural agent arctigenin

BACKGROUND

Asthma is a heterogenetic disorder characterized by chronic inflammation with variable airflow obstruction and airway hyper-responsiveness. As the most potent and popular bronchodilators, β2 adrenergic receptor (β2 AR) agonists bind to the β2 ARs that are coupled via a stimulatory G protein to adenylyl cyclase, thereby improving cAMP accumulation and resulting in airway smooth muscle relaxation. We previously demonstrated arctigenin had a synergistic function with the β2 AR agonist, but the target for this remained elusive.

METHOD

Chemical proteomics capturing was used to enrich and uncover the target of arctigenin in human bronchial smooth muscle cells, and reverse docking and molecular dynamic stimulation were performed to evaluate the binding of arctigenin and its target. In vitro enzyme activities and protein levels were demonstrated with special kits and Western blotting. Finally, guinea pig tracheal muscle segregation and ex vivo function were analysed.

RESULTS

Arctigenin bound to PDK1 with an ideal binding free energy -25.45 kcal/mol and inhibited PDK1 kinase activity without changing its protein level. Additionally, arctigenin reduced PKB/Akt-induced phosphorylation of PDE4D, which was first identified in this study. Attenuation of PDE4D resulted in cAMP accumulation in human bronchial smooth muscle. The inhibition of PDK1 showed a synergistic function with β2 AR agonists and relaxed the constriction of segregated guinea pig tracheal muscle.

CONCLUSIONS

The PDK1/Akt/PDE4D axis serves as a novel asthma target, which may benefit airflow obstruction.

Dielectric function of two-phase colloid-polymer nanocomposite

The plasmon resonance of metal nanoparticles determines their optical response in the visible spectral range. Many details such as the electronic properties of gold near the particle surface and the local environment of the particles influence the spectra. We show how the cheap but highly precise fabrication of composite nanolayers by spin-assisted layer-by-layer deposition of polyelectrolytes can be used to investigate the spectral response of gold nanospheres (GNS) and gold nanorods (GNR) in a self-consistent way, using the established Maxwell-Garnett effective medium (MGEM) theory beyond the limit of homogeneous media. We show that the dielectric function of gold nanoparticles differs from the bulk value and experimentally characterize the shape and the surrounding of the particles thoroughly by SEM, AFM and ellipsometry. Averaging the dielectric functions of the layered surrounding by an appropriate weighting with the electric field intensity yields excellent agreement for the spectra of several nanoparticles and nanorods with various cover-layer thicknesses.

Tolerance analysis of multilayer diffractive optics based on polychromatic integral diffraction efficiency

Multilayer diffractive optical elements (MLDOEs) can achieve high diffraction efficiency for broadband wavelength. Polychromatic integral diffraction efficiency (PIDE) is the key concern for evaluating diffraction efficiency over the waveband. The modulation transfer function of a hybrid refractive-diffractive optical system is directly affected by the PIDE. The relationship between PIDE and continuous manufacturing errors for microstructure heights and periodic widths of MLDOEs is studied theoretically in this paper, and an example of MLDOEs is discussed in the visible waveband. The analysis results can be used for manufacturing error control in microstructure heights and periodic widths.

TRAF3IP3, a novel autophagy up-regulated gene, is involved in marginal zone B lymphocyte development and survival

Tumour necrosis factor receptor-associated factor 3 (TRAF3) interacting protein 3 (TRAF3IP3; also known as T3JAM) is expressed specifically in immune organs and tissues. To investigate the impact of TRAF3IP3 on immunity, we generated Traf3ip3 knock-out (KO) mice. Interestingly, these mice exhibited a significant reduction in the number of common lymphoid progenitors (CLPs) and inhibition of B cell development in the bone marrow. Furthermore, Traf3ip3 KO mice lacked marginal zone (MZ) B cells in the spleen. Traf3ip3 KO mice also exhibited a reduced amount of serum natural antibodies and impaired T cell-independent type II (TI-II) responses to trinitrophenol (TNP)-Ficoll antigen. Additionally, our results showed that Traf3ip3 promotes autophagy via an ATG16L1-binding motif, and MZ B cells isolated from mutant mice showed a diminished level of autophagy and a high rate of apoptosis. These results suggest that TRAF3IP3 contributes to MZ B cell survival by up-regulating autophagy, thereby promoting the TI-II immune response.

Enhanced rhamnolipid production of Pseudomonas aeruginosa SG by increasing copy number of rhlAB genes with modified promoter

Increasing the copy number of rhlAB genes with a modified promoter efficiently enhanced the production of rhamnolipid by P. aeruginosa.

Hydrocarbon degradation by a newly isolated thermophilic Anoxybacillus sp. with bioemulsifier production and new alkB genes

In this work, a new thermophilic bacterial strain was isolated and identified asAnoxybacillussp. WJ-4. This strain of WJ-4 can degrade a wide range of hydrocarbons, and production of an oligosaccharide–lipid–peptide bioemulsifier was detected.

The injury resistant ability of melanopsin-expressing intrinsically photosensitive retinal ganglion cells

Neurons in the mammalian retina expressing the photopigment melanopsin have been identified as a class of intrinsically photosensitive retinal ganglion cells (ipRGCs). This discovery more than a decade ago has opened up an exciting new field of retinal research, and following the initial identification of photosensitive ganglion cells, several subtypes have been described. A number of studies have shown that ipRGCs subserve photoentrainment of circadian rhythms. They also influence other non-image forming functions of the visual system, such as the pupillary light reflex, sleep, cognition, mood, light aversion and development of the retina. These novel photosensitive neurons also influence form vision by contributing to contrast detection. Furthermore, studies have shown that ipRGCs are more injury-resistant following optic nerve injury, in animal models of glaucoma, and in patients with mitochondrial optic neuropathies, i.e., Leber’s hereditary optic neuropathy and dominant optic atrophy. There is also an indication that these cells may be resistant to glutamate-induced excitotoxicity. Herein we provide an overview of ipRGCs and discuss the injury-resistant character of these neurons under certain pathological and experimental conditions.

Biosurfactant produced by novel Pseudomonas sp. WJ6 with biodegradation of n-alkanes and polycyclic aromatic hydrocarbons

Alkanes and polycyclic aromatic hydrocarbons (PAHs) have threatened the environment due to toxicity and poor bioavailability. Interest in degradation of these hazardous materials by biosurfactant-producing bacteria has been steadily increasing in recent years. In this work, a novel biosurfactant-producing Pseudomonas sp. WJ6 was isolated to degrade a wide range of n-alkanes and polycyclic aromatic hydrocarbons. Production of lipopeptide biosurfactant was observed in all biodegradable studies. These lipopeptides were purified and identified by C18 RP-HPLC system and electrospray ionization-mass spectrometry. Results of structural analysis showed that these lipopeptides generated from different hydrocarbons were classified to be surfactin, fengycin and lichenysin. Heavy-oil sludge washing experiments demonstrated that lipopeptides produced by Pseudomonas sp. WJ6 have 92.46% of heavy-oil washing efficiency. The obtained results indicate that this novel bacterial strain and its lipopeptides have great potentials in the environmental remediation and petroleum recovery.

Microbial abundance and community composition influence production performance in a low-temperature petroleum reservoir

Enhanced oil recovery using indigenous microorganisms has been successfully applied in the petroleum industry, but the role of microorganisms remains poorly understood. Here, we investigated the relationship between microbial population dynamics and oil production performance during a water flooding process coupled with nutrient injection in a low-temperature petroleum reservoir. Samples were collected monthly over a two-year period. The microbial composition of samples was determined using 16S rRNA gene pyrosequencing and real-time quantitative polymerase chain reaction analyses. Our results indicated that the microbial community structure in each production well microhabitat was dramatically altered during flooding with eutrophic water. As well as an increase in the density of microorganisms, biosurfactant producers, such as Pseudomonas, Alcaligenes, Rhodococcus, and Rhizobium, were detected in abundance. Furthermore, the density of these microorganisms was closely related to the incremental oil production. Oil emulsification and changes in the fluid-production profile were also observed. In addition, we found that microbial community structure was strongly correlated with environmental factors, such as water content and total nitrogen. These results suggest that injected nutrients increase the abundance of microorganisms, particularly biosurfactant producers. These bacteria and their metabolic products subsequently emulsify oil and alter fluid-production profiles to enhance oil recovery.

Lyn regulates cytotoxicity in respiratory epithelial cells challenged by cigarette smoke extracts

Cigarette smoking is associated with a series of lung diseases such as cancer, chronic obstructive pulmonary disease (COPD), and asthma. Despite the intense interest, the underlying molecular mechanism in smoking-related diseases is incompletely understood. Here, we show that Lyn is involved in cytotoxicity of respiratory epithelial cells induced by cigarette smoke extracts (CSE), an in vitro culture model for evaluating tobacco toxicity. In addition, exposure to CSE promotes the activation of JAK2 and STAT1, which is responsible for CSE-induced cytotoxicity. Moreover, a Lyn specific siRNA, Lyn dominant negative construct and pharmacological inhibitor all alleviated CSE-induced cytotoxicity in lung cells to different extents, respectively. Furthermore, Lyn also influences the phagocytosis of bacteria by murine alveolar macrophages, extending its impact on innate immunity. Taken together, these findings indicate that Lyn may play a role in the regulation of cigarette smoking-induced lung cell death, and may be a potential novel therapeutic target for cigarette smoking related lung diseases.

Cardiac mass in Behçet's disease

Cardiac mass is a rare manifestation of Behçet's disease (BD). Intracardiac thrombosis, endomyocardiofibrosis, endocardial fibroelastosis, inflammatory mass and cystic change have been reported as different entities of cardiac mass in BD. Here we presented 6 cases of this rare manifestation of BD. The clinical and pathological features were reviewed.