Phycoremediation integrated approach for the removal of pharmaceuticals and personal care products from wastewater - A review

Pharmaceuticals and personal care products (PPCPs) are of emerging concerns because of their large usage, persistent nature which promised their continuous disposal into the environment, as these pollutants are stable enough to pass through wastewater treatment plants causing hazardous effects on all the organisms through bioaccumulation, biomagnification, and bioconcentration. The available technologies are not capable of eliminating all the PPCPs along with their degraded products but phycoremediation has the advantage over these technologies by biodegrading the pollutants without developing resistant genes. Even though phycoremediation has many advantages, industries have found difficulty in adapting this technology as a single-stage treatment process. To overcome these drawbacks recent research studies have focused on developing technology that integrated phycoremediation with the commonly employed treatment processes that are in operation for treating the PPCPs effectively. This review paper focuses on such research approaches that focused on integrating phycoremediation with other technologies such as activated sludge process (ASP), advanced oxidation process (AOP), Up-flow anaerobic sludge blanket reactor (UASBR), UV irradiation, and constructed wetland (CW) with the advantages and limitations of each integration processes. Furthermore, augmenting phycoremediation by co-metabolic mechanism with the addition of sodium chloride, sodium acetate, and glucose for the removal of PPCPs has been highlighted in this review paper.

An investigation on removal of ciprofloxacin and norfloxacin by phycoremediation with an emphasis on acute toxicity and biochemical composition

Ciprofloxacin (CIP) and norfloxacin (NOR) belong to the class of emerging contaminants that are frequently detected in the aquatic environment as a binary mixture, responsible for the development of antibiotic-resistant genes and antibiotic-resistant bacteria. This study aims to investigate five different algal species Chlorella vulgaris (Cv), Chlorella pyrenoidosa (Cp), Scenedesmus obliquus (So), Tetradesmus sp (T) and Monoraphidium sp (M) for their tolerance and removal of binary mixture. The effects on biochemical composition in the algal species concerning the binary mixture and its removal efficiency are first reported in this study. The acute toxicity (96 h EC50) values are in the order of So > Cp > T > M > Cv, Chlorella vulgaris is the most sensitive algal species with 17.73 ± 0.24 mg/L and Scenedesmus obliquus is the least sensitive algal species with 39.19 ± 0.79 mg/L. The removal efficiency of the binary mixture was found to be in the order of So > Cp > T > M > Cv, Scenedesmus obliquus removed CIP (52.4%) and NOR (87.5%) with biodegradation as the major contributing removal mechanism. Furthermore, less toxic biotransformed products were detected in Scenedesmus obliquus and the biochemical characterization revealed that the growth-stimulating effect is higher with lipid (35%), carbohydrate (18%), and protein (33%) providing an advantage in the production of valuable biomass.

A pilot-scale study on the removal of binary mixture (ciprofloxacin and norfloxacin) by Scenedesmus obliquus: Optimization, biotransformation, and biofuel profile

Ciprofloxacin (CIP) and norfloxacin (NOR) belong to the organic contaminants of emerging concern (OCECs) that are frequently detected in wastewater matrices at ng/L to mg/L concentrations. This study investigates the potential of Scenedesmus obliquus in the treatment of CIP and NOR as a binary mixture from raw wastewater. Optimization of inoculum was done to find the required cell density concentration that has less inhibition and high removal. The optimum inoculum (cell density: 200 × 105 cells/mL and OD680: 1.0) has shown 75% removal with no inhibition of growth. A pilot scale study was conducted in controlled environment using high-rate algal pond to investigate the contribution of abiotic and biotic removal. Abiotic removal is negligible in comparison with the biotic contribution of removal. The order of removal efficiency is observed as COD (88%) > NOR (84.8%) > CIP (84.6%) > NH4+ (71.7%) with biodegradation as the major removal mechanism. Biotransformed products of CIP + NOR were identified inside the Scenedesmus obliquus. During the pilot-scale study, Biomass (3.70 ± 0.07 g/L) was harvested with carbohydrates (17.85 ± 0.1%), lipids (38.36 ± 0.13%), and proteins (28.18 ± 1.63%). Lipid productivity in binary mixture was 2.6 times higher than the lipid production in control condition. Transesterification of these lipids yielded good biofuel composition of 32.72% of saturated fatty acids and 21.7% of unsaturated fatty acids.

A pilot-scale study of the integrated phycoremediation-photolytic ozonation based municipal solid waste leachate treatment process

Municipal solid waste (MSW) leachate is a highly polluted liquid that accumulates in the landfill and contains a high concentration of toxic pollutants which can pollute the surrounding surface water and groundwater as well, if not treated properly. In this study, an integrated approach of phycoremediation with photolytic ozonation was employed for the leachate collected from the MSW dumpsite which has high Chemical Oxygen Demand (COD) and ammonium (NH₄⁺) levels. Photolytic ozonation treatment was employed as a pre-treatment step under operating parameters of pH: 9.0; Ozone dosage: 5 g/h; UV-C: λ = 254 nm; and contact time: 60 min, in which the COD and NH₄⁺ in the leachate was reduced up to 81% and 95%, respectively. The selected algae Chlorella vulgaris (C.vulgaris) was employed in a lab-scale study to optimize the inoculum conditions in the photolytic ozonated leachate (POL). The specific growth rate of C.vulgaris was observed as 0.14/d in the POL at the optimized condition (inoculum size of 25% (T25)) during the study period of 11 days. High-rate algal pond (HRAP) was employed for the pilot-scale study in controlled environmental conditions as in the T25 experimental run for the assessment of POL treatment and biomass production. C.vulgaris reduced the concentration of pollutants COD, NH₄⁺, and heavy metals (Cu, Fe) in the POL up to 93%, 94%, and 71%, respectively, with the dry biomass productivity of 0.727 g/L/d which is 3 times higher than the biomass productivity of C.vulgaris in freshwater conditions. The biochemical composition (carbohydrates, proteins, and lipids) of the harvested biomass has higher lipid production with lipid productivity of 120 mg/L/d which can be used as a feedstock for the production of value-a dded products.