Preparation, In Vitro Characterization, and Evaluation of Polymeric pH-Responsive Hydrogels for Controlled Drug Release

The purpose of the current research is to formulate a smart drug delivery system for solubility enhancement and sustained release of hydrophobic drugs. Drug solubility-related challenges constitute a significant concern for formulation scientists. To address this issue, a recent study focused on developing PEG-g-poly(MAA) copolymeric nanogels to enhance the solubility of olmesartan, a poorly soluble drug. The researchers employed a free radical polymerization technique to formulate these nanogels. Nine formulations were formulated. The newly formulated nanogels underwent comprehensive tests, including physicochemical assessments, dissolution studies, solubility evaluations, toxicity investigations, and stability examinations. Fourier transform infrared (FTIR) investigations confirmed the successful encapsulation of olmesartan within the nanogels, while thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) studies verified their thermal stability. Scanning electron microscopy (SEM) images revealed the presence of pores on the surface of the nanogels, facilitating water penetration and promoting rapid drug release. Moreover, powder X-ray diffraction (PXRD) studies indicated that the prepared nanogels exhibited an amorphous structure. The nanogel carrier system led to a significant enhancement in olmesartan's solubility, achieving a remarkable 12.3-fold increase at pH 1.2 and 13.29-fold rise in phosphate buffer of pH 6.8 (NGP3). Significant swelling was observed at pH 6.8 compared to pH 1.2. Moreover, the formulated nexus is nontoxic and biocompatible and depicts considerable potential for delivery of drugs and protein as well as heat-sensitive active moieties.

Pharmaceutical Methods for Enhancing the Dissolution of Poorly Water-Soluble Drugs

Low water solubility is the main hindrance in the growth of pharmaceutical industry. Approximately 90% of newer molecules under investigation for drugs and 40% of novel drugs have been reported to have low water solubility. The key and thought-provoking task for the formulation scientists is the development of novel techniques to overcome the solubility-related issues of these drugs. The main intention of present review is to depict the conventional and novel strategies to overcome the solubility-related problems of Biopharmaceutical Classification System Class-II drugs. More than 100 articles published in the last 5 years were reviewed to have a look at the strategies used for solubility enhancement. pH modification, salt forms, amorphous forms, surfactant solubilization, cosolvency, solid dispersions, inclusion complexation, polymeric micelles, crystals, size reduction, nanonization, proliposomes, liposomes, solid lipid nanoparticles, microemulsions, and self-emulsifying drug delivery systems are the various techniques to yield better bioavailability of poorly soluble drugs. The selection of solubility enhancement technique is based on the dosage form and physiochemical characteristics of drug molecules.

Plasticiser-Free 3D Printed Hydrophilic Matrices: Quantitative 3D Surface Texture, Mechanical, Swelling, Erosion, Drug Release and Pharmacokinetic Studies

Hydroxypropyl methyl cellulose, HPMC, a hydrophilic polymer, is widely used for the development of extended release hydrophilic matrices and it is also considered as a good contender for the fabrication of 3D printing of matrix tablets. It is often combined with plasticisers to enable extrusion. The aim of the current project was to develop plasticizer-free 3D printed hydrophilic matrices using drug loaded filaments prepared via HME to achieve an in vitro (swelling, erosion and drug release) and in vivo (drug absorption) performance which is analogous to hydrophilic matrix tablets developed through conventional approaches. Additionally, the morphology of the printed tablets was studied using quantitative 3D surface texture studies and the porosity calculated. Filaments were produced successfully and used to produce matrix tablets with acceptable drug loading (95-105%), mechanical and surface texture properties regardless of the employed HPMC grade. The viscosity of HPMC had a discernible impact on the swelling, erosion, HPMC dissolution, drug release and pharmacokinetic findings. The highest viscosity grade (K100M) results in higher degree of swelling, decreased HPMC dissolution, low matrix erosion, decreased drug release and extended drug absorption profile. Overall, this study demonstrated that the drug loaded (glipizide) filaments and matrix tablets of medium to high viscosity grades of HPMC, without the aid of plasticisers, can be successfully prepared. Furthermore, the in vitro and in vivo studies have revealed the successful fabrication of extended release matrices.

Development and evaluation of novel antihypertensive orodispersible tablets

Objective of present study was to enhance patient compliance in pediatrics and geriatrics patients of Hypertension. To achieve this target, innovative orodispersible tablets of atenolol and atorvastatin was developed to produce instant action by rapidly disintegrating into oral cavity. Three different techniques like direct compression, effervescent and sublimation methods were used to prepare these tablets (Five batches of tablets by each method) by using two superdisintegrants like Sodium starch glycolate and pregelatinized starch alone and in combination. Pre-formulation studies including rheological analysis (Bulk density, tapped density, Angle of repose, Carr's compressibility index, Hausner's ratio), compatibility studies such as Fourier transform infrared spectrophotometry (FTIR) and Differential scanning colorimetry (DSC), Post-compression and stability studies were also performed. Finally, results were statistically evaluated by the applying one way ANOVA test and mean. It was concluded that the formulation F8 containing Sodium starch glycolate 2% and pregelatinized starch 6% found best regarding disintegration time, wetting volume, wetting time, release studies etc. The order in which drug release was quicker is Pregelatinized starch plus Sodium starch glycolate > Pregelatinized starch > Sodium starch glycolate (primojel). It was concluded that sublimation method was the best among three methods used for orodispersible tablets formulations.

Development and in-vitro Evaluation of Once Daily Tablet Dosage Form of Loxoprofen Sodium

Purpose: To formulate and characterize once daily controlled release tablet of loxoprofen sodium.Methods: Eudragit RS-100, hydroxylpropyl methylcellulose (HPMC) and pectin were used as release retarding polymers. All the formulations were prepared by direct compression method. Various precompression studies were carried out to determine Hausner’s ratio, Carr’s index, angle of repose, bulk density and tapped density Differential scanning calorimetry (DSC) studies and also post-compression studies to evaluate hardness, friability, weight variation, drug content, in-vitro drug release were conducted on the tablets. The drug release data were subjected to kinetic models, including zero order, first order, Hixon Crowell, Higuchi and Korsmeyer-Peppas.Results: Compressibility index (7.6 ± 1.32 - 12.5 ± 1.43%), Hausner’s ratio (1.08 ± 0.04 - 1.14 ± 0.03), angle of repose (27.78 ± 0.47 - 30.49 ± 0.46°), hardness (6.25 ± 0.27 - 7.21±0.21 kg/cm2), friability (0.14 ± 0.06 - 0.28 ± 0.0 %), weight variation (249.5 ± 2.09 - 251.35 ± 2.41 mg) and drug content  (97.30 ± 0.28 - 103.70 ± 0.31 %) were within generally accepted limits for the pre-and post-compression formulations, respectively. The tablets having the maximum amount of among the three polymers tested as matrix materials, HPMC, represented by F3 tablets, exerted better sustained release properties after 12 h. Release pattern was more of Fickian diffusion followed by Higuchi mechanism.Conclusion: The release of the loxoprofen sodium was optimized up to 12 h.Keywords: Loxoprofen, Sustained release, hydroxypropyl methylcelluose, Pectin, Eudragit, Matrix tablets

Formulation and evaluation of mouth disintegrating tablets of atenolol and atorvastatin

In this study, mouth-disintegrating tablets of atenolol and atorvastatin combination were formulated using superdisintegrants to impart fast disintegration. Fifteen formulations were prepared based on different concentrations of two superdisintegrants, croscarmellose sodium and Kyron-T₁₃₄. Three different techniques such as direct compression, effervescent and sublimation were used to study the effect of manufacturing processes, nature and concentration of superdisintegrants on various features of these tablets. Five formulations were made using each method. Precompression studies like bulk density, tapped density, angle of repose, Carr's compressibility index, Hausner's ratio and compatibility studies such as Fourier transform infrared spectroscopy and differential scanning calorimetry were performed. Various features such as hardness, thickness, diameter, weight variation, friability, disintegration time, dissolution studies, wetting time, wetting volume, water absorption ratio, modified disintegration, uniformity of contents and stability were evaluated. Finally results were statistically analyzed by the application of one way ANOVA test. Formulation F₁₃ containing Kyron-T₁₃₄ (6%) and croscarmellose sodium (2%) was found to be the best among all fifteen formulations prepared in all aspects evaluated. Sublimation method is found to be the best among three methods of preparation used.

Differences in Phyllotreta cruciferae and Phyllotreta striolata (Coleoptera: Chrysomelidae) responses to neonicotinoid seed treatments

Insecticidal seed treatments are used commonly throughout the Northern Great Plains of North America to systemically protect seedlings of canola (Brassica napus L. and Brassica rapa L.) from attack by the flea beetles Phyllotreta cruciferae (Goeze) and Phyllotreta striolata (F.) (Coleoptera: Chrysomelidae). Here, we investigated differential responses by the two flea beetle species to the neonicotinoid seed treatments thiamethoxam (Helix and Helix XTra) and clothianidin (Prosper 400) in greenhouse experiments. P. cruciferae experienced higher mortality and fed less when exposed to these compounds than did P. striolata. Beetles of the overwintered and the summer generations responded differently when feeding on seedlings that developed with insecticidal seed treatments, with mortality higher for P. cruciferae in May than in August. When the two flea beetle species were held together at equal densities and allowed to feed on seedlings affected by the seed treatments, mortality of P. cruciferae significantly exceeded that of P. striolata. Differences in efficacies of these compounds for these beetles have ramifications for management strategies in regions where these insects occur sympatrically. Competitive release of P. striolata was previously reported to occur when P. cruciferae was excluded from brassicaceous crops; consequently, the consistent use of these seed treatments over millions of hectares of canola cropland may be a factor that contributes to a shift in prevalence of flea beetle pest species from P. cruciferae toward P. striolata.