Preparation and Characterization of a Suite of Ephedra-Containing Standard Reference Materials

The National Institute of Standards and Technology, the U.S. Food and Drug Administration, Center for Drug Evaluation and Research and Center for Food Safety and Applied Nutrition, and the National Institutes of Health, Office of Dietary Supplements, are collaborating to produce a series of Standard Reference Materials (SRMs) for dietary supplements. A suite of ephedra materials is the first in the series, and this paper describes the acquisition, preparation, and value assignment of these materials: SRMs 3240 Ephedra sinica Stapf Aerial Parts, 3241 E. sinica Stapf Native Extract, 3242 E. sinica Stapf Commercial Extract, 3243 Ephedra-Containing Solid Oral Dosage Form, and 3244 Ephedra-Containing Protein Powder. Values are assigned for ephedrine alkaloids and toxic elements in all 5 materials. Values are assigned for other analytes (e.g., caffeine, nutrient elements, proximates, etc.) in some of the materials, as appropriate. Materials in this suite of SRMs are intended for use as primary control materials when values are assigned to in-house (secondary) control materials and for validation of analytical methods for the measurement of alkaloids, toxic elements, and, in the case of SRM 3244, nutrients in similar materials.

Mass bias fractionation laws for multi-collector ICPMS: assumptions and their experimental verification

Although mass bias fractionation correction is among the most studied theoretical aspects of analytical mass spectrometry, several assumptions imbedded in the conventional correction models remain largely untested. Experimental evidence is given herein highlighting parts-per-thousand deviations from the conventional mass bias correction models which can occur with use of multicollector inductively coupled plasma mass spectrometry. Furthermore, current mass spectrometric approaches are not capable of elucidating the fractionation exponent.

Characterization of a suite of ginkgo-containing standard reference materials

A suite of three ginkgo-containing dietary supplement Standard Reference Materials (SRMs) has been issued by the National Institute of Standards and Technology (NIST) with certified values for flavonoid aglycones, ginkgolides, bilobalide, and selected toxic trace elements. The materials represent a range of matrices (i.e., plant, extract, and finished product) that provide different analytical challenges. The constituents have been determined by at least two independent analytical methods with measurements performed by NIST and at least one collaborating laboratory. The methods utilized different extractions, chromatographic separations, modes of detection, and approaches to quantitation. The SRMs are primarily intended for method validation and for use as control materials to support the analysis of dietary supplements and related botanical materials.

Determination of ephedrine alkaloids in dietary supplement standard reference materials

A suite of five ephedra-containing dietary supplement Standard Reference Materials (SRMs) has been issued by the National Institute of Standards and Technology (NIST) with certified values for ephedrine alkaloids, synephrine, caffeine, and selected toxic trace elements. The materials represent a variety of natural, extracted, and processed sample matrixes that provide different analytical challenges. The constituents have been determined by multiple independent methods with measurements performed by NIST and by three collaborating laboratories. The methods utilized different sample extraction and cleanup steps in addition to different instrumental analytical techniques and approaches to quantification. In addition, food-matrix proximates were determined by National Food Processor Association laboratories for one of the ephedra-containing SRMs. The SRMs are primarily intended for method validation and for use as control materials to support the analysis of dietary supplements and related botanical materials.

Preparation and characterization of a suite of ephedra-containing standard reference materials

The National Institute of Standards and Technology, the U.S. Food and Drug Administration, Center for Drug Evaluation and Research and Center for Food Safety and Applied Nutrition, and the National Institutes of Health, Office of Dietary Supplements, are collaborating to produce a series of Standard Reference Materials (SRMs) for dietary supplements. A suite of ephedra materials is the first in the series, and this paper describes the acquisition, preparation, and value assignment of these materials: SRMs 3240 Ephedra sinica Stapf Aerial Parts, 3241 E. sinica Stapf Native Extract, 3242 E. sinica Stapf Commercial Extract, 3243 Ephedra-Containing Solid Oral Dosage Form, and 3244 Ephedra-Containing Protein Powder. Values are assigned for ephedrine alkaloids and toxic elements in all 5 materials. Values are assigned for other analytes (e.g., caffeine, nutrient elements, proximates, etc.) in some of the materials, as appropriate. Materials in this suite of SRMs are intended for use as primary control materials when values are assigned to in-house (secondary) control materials and for validation of analytical methods for the measurement of alkaloids, toxic elements, and, in the case of SRM 3244, nutrients in similar materials.

Certification of a new selenized yeast reference material (SELM-1) for methionine, selenomethinone and total selenium content and its use in an intercomparison exercise for quantifying these analytes

A new selenized yeast reference material (SELM-1) produced by the Institute for National Measurement Standards, National Research Council of Canada (INMS, NRC) certified for total selenium (2,059+/-64 mg kg(-1)), methionine (Met, 5,758+/-277 mg kg(-1)) and selenomethionine (SeMet, 3,431+/-157 mg kg(-1)) content is described. The +/-value represents an expanded uncertainty with a coverage factor of 2. SeMet and Met amount contents were established following a methanesulfonic acid digestion of the yeast using GC-MS and LC-MS quantitation. Isotope dilution (ID) calibration was used for both compounds, using 13C-labelled SeMet and Met. Total Se was determined after complete microwave acid digestion based on ID ICP-MS using a 82Se spike or ICP-OES spectrometry using external calibration. An international intercomparison exercise was piloted by NRC to assess the state-of-the-art of measurement of selenomethione in SELM-1. Determination of total Se and methionine was also attempted. Seven laboratories submitted results (2 National Metrology Institutes (NMIs) and 5 university/government laboratories). For SeMet, ten independent mean values were generated. Various acid digestion and enzymatic procedures followed by LC ICP-MS, LC AFS or GC-MS quantitation were used. Four values were based on species-specific ID calibration, one on non-species-specific ID with the remainder using standard addition (SA) or external calibration (EC). For total selenium, laboratories employed various acid digestion procedures followed by ICP-MS, AFS or GC-MS quantitation. Four laboratories employed ID calibration, the remaining used SA or EC. A total of seven independent results were submitted. Results for methionine were reported by only three laboratories, all of which used various acid digestion protocols combined with determination by GC-MS and LC UV. The majority of participants submitted values within the certified range for SeMet and total Se, whereas the intercomparison was judged unsuccessful for Met because only two external laboratories provided values, both of which were outside the certified range.

Determination of Methionine and Selenomethionine in Selenium-Enriched Yeast by Species-Specific Isotope Dilution with Liquid Chromatography−Mass Spectrometry and Inductively Coupled Plasma Mass Spectrometry Detection

Selenomethionine (SeMet) and methionine (Met), liberated by acid hydrolysis of selenium-enriched yeast, were quantified by liquid chromatography-mass spectrometry (LC/MS) using standard additions calibrations as well as isotope dilution (ID) based on species-specific (13)C-enriched spikes. LC inductively coupled plasma mass spectrometry (ICPMS) was also employed for the quantification of SeMet, and (74)Se-enriched SeMet was used for ID calibration. The results were evaluated to ascertain the feasibility of using these methods in a campaign to certify selenized yeast. Good agreement was found between the methods, which, when averaged, gave concentrations of 5482.2 +/- 101 and 3256.9 +/- 217.4 microg/g for Met and SeMet, respectively. This corresponds to a 1.68:1 Met-to-SeMet ratio in the yeast. Quantification by ID LC/MS and LC ICPMS yields the most precise sets of results with relative standard deviations in the range 0.5-1.3% (n = 6). A total selenium concentration of 2064.6 +/- 45.4 microg/g was obtained for this yeast material. The extraction efficiency and a mass balance budget were determined. Acid hydrolysis liberated 81.0% of the total selenium present. SeMet comprised 79.0% of the extracted selenium and 63.9% of the total selenium present in the yeast.

A correlation between the Geriatric Depression Scale long and short forms

A sample of 81 elderly subjects (M age = 76 years) volunteered to take part in a study to determine whether the Geriatric Depression Scale (GDS) Short Form is an acceptable substitute for the GDS Long Form. Half of the subjects took the GDS Long Form first, and half took the GDS Short Form first. After two weeks, the subjects were given the remaining form. Although the mean scores were lower than in previous correlation studies, the results indicated that the GDS Short Form correlated significantly (r = +.66, p less than .01) with the GDS Long Form, but not highly enough to be considered an appropriate substitute.

Compatibility of calcium chloride and calcium gluconate with sodium phosphate in a mixed TPN solution

The maximum concentrations of phosphate that will remain soluble in a parenteral nutrient solution containing various concentrations of calcium chloride or calcium gluconate were determined. Various concentrations of sodium phosphate were mixed with FreAmine II (McGaw Laboratories), and the resulting solutions were mixed with 50% dextrose solutions containing various concentrations of calcium chloride or calcium gluconate. The final solutions were sealed and stored at 30 degrees C for 24 hours and then were inspected visually for precipitate formation. It was found that higher equivalent concentrations of phosphate are attainable when calcium gluconate, instead of calcium chloride, is used as the calcium source. Factors found to influence the concentrations of calcium and phosphate that are compatible in amino acid solutions are the calcium salt used, temperature and duration of storage, dextrose concentration, amino acid composition, pH, and other additives.

Visual compatibility of 30 additives with a parenteral nutrient solution

The visual compatibility of 30 drug additives with total parenteral nutrient (TPN) solutions (4.25% amino acids, 25% dextrose injection) was studied. For each drug additive, three TPN solutions were mixed; two were stored for 22 hours at 4 C then allowed to equilibrate to room temperature for two hours. Two 25-ml samples from each TPN solution were examined immediately or after 25 hours for visual appearance, particulate matter levels and pH. A microscope was used to count and measure particles filtered from samples on a 0.8-micrometer filter. Only the TPN solutions containing amphotericin B showed any visual discoloration or precipitation. All amphotericin B samples and the 25-hour ampicillin sodium samples exceeded USP particulate matter specifications. Individual particulate matter levels of the other TPN solutions varied but met USP specifications. With the exception of tetracycline hydrochloride, which dropped the TPN solution's pH 0.9 units, the additives had little effect on pH of the TPN solutions (pH 6.45). Amphotericin B and ampicillin sodium were considered visually incompatible with TPN solutions. All other drug additives tested were visually compatible with TPN solutions.