A microfabricated array bioreactor for perfused 3D liver culture

We describe the design, fabrication, and performance of a bioreactor that enables both morphogenesis of 3D tissue structures under continuous perfusion and repeated in situ observation by light microscopy. Three-dimensional scaffolds were created by deep reactive ion etching of silicon wafers to create an array of channels (through-holes) with cell-adhesive walls. Scaffolds were combined with a cell-retaining filter and support in a reactor housing designed to deliver a continuous perfusate across the top of the array and through the 3D tissue mass in each channel. Reactor dimensions were constructed so that perfusate flow rates meet estimated values of cellular oxygen demands while providing fluid shear stress at or below a physiological range (<2 dyne cm(2)), as determined by comparison of numerical models of reactor fluid flow patterns to literature values of physiological shear stresses. We studied the behavior of primary rat hepatocytes seeded into the reactors and cultured for up to 2 weeks, and found that cells seeded into the channels rearranged extensively to form tissue like structures and remained viable throughout the culture period. We further observed that preaggregation of the cells into spheroidal structures prior to seeding improved the morphogenesis of tissue structure and maintenance of viability. We also demonstrate repeated in situ imaging of tissue structure and function using two-photon microscopy.

Design, fabrication and implementation of a novel multi-parameter control microfluidic platform for three-dimensional cell culture and real-time imaging

New and more biologically relevant in vitro models are needed for use in drug development, regenerative medicine, and fundamental scientific investigation. While the importance of the extracellular microenvironment is clear, the ability to investigate the effects of physiologically relevant biophysical and biochemical factors is restricted in traditional cell culture platforms. Moreover, the versatility for multi-parameter manipulation, on a single platform, with the optical resolution to monitor the dynamics of individual cells or small population is lacking. Here we introduce a microfluidic platform for 3D cell culture in biologically derived or synthetic hydrogels with the capability to monitor cellular dynamics in response to changes in their microenvironment. Direct scaffold microinjection, was employed to incorporate 3D matrices into microfluidic devices. Our system geometry permits a unique window for studying directional migration, e.g. sprouting angiogenesis, since sprouts grow predominantly in the microscopic viewing plane. In this study, we demonstrate the ability to generate gradients (non-reactive solute), surface shear, interstitial flow, and image cells in situ. Three different capillary morphogenesis assays are demonstrated. Human adult dermal microvascular endothelial cells (HMVEC-ad) were maintained in culture for up to 7 days during which they formed open lumen-like structures which was confirmed with confocal microscopy and by perfusion with fluorescent microspheres. In the sprouting assay, time-lapse movies revealed cellular mechanisms and dynamics (filopodial projection/retraction, directional migration, cell division and lumen formation) during tip-cell invasion of underlying 3D matrix and subsequent lumen formation.

Tidal volume and frequency dependence of carbon dioxide elimination by high-frequency ventilation

Six patients with chronic respiratory failure received mechanical ventilation with tidal volumes less than or equal to the dead-space volume, at frequencies of 30 to 900 breaths per minute. The rate of elimination of carbon dioxide from the ventilator system during a brief trial of high-frequency ventilation accurately predicted the long-term effectiveness of a given combination of frequency and tidal volume. Below frequencies of about 200 breaths per minute, the volume of carbon dioxide eliminated from these patients was most strongly related to the product of frequency and tidal volume; at higher frequencies, carbon dioxide elimination was determined by the tidal volume and was independent of frequency. These results suggest that although the effectiveness of high-frequency ventilation is primarily a function of the product of tidal volume and frequency, above a critical frequency the mechanical characteristics of the lung reduce gas transport by limiting the volume transmitted to the periphery of the lung.

The impact of biomechanics in tissue engineering and regenerative medicine

Biomechanical factors profoundly influence the processes of tissue growth, development, maintenance, degeneration, and repair. Regenerative strategies to restore damaged or diseased tissues in vivo and create living tissue replacements in vitro have recently begun to harness advances in understanding of how cells and tissues sense and adapt to their mechanical environment. It is clear that biomechanical considerations will be fundamental to the successful development of clinical therapies based on principles of tissue engineering and regenerative medicine for a broad range of musculoskeletal, cardiovascular, craniofacial, skin, urinary, and neural tissues. Biomechanical stimuli may in fact hold the key to producing regenerated tissues with high strength and endurance. However, many challenges remain, particularly for tissues that function within complex and demanding mechanical environments in vivo. This paper reviews the present role and potential impact of experimental and computational biomechanics in engineering functional tissues using several illustrative examples of past successes and future grand challenges.

Substrate viscosity enhances correlation in epithelial sheet movement

The movement of the epithelium plays vital roles in the development and renewal of complex tissues, from the separation of tissues in the early embryo, to turnover in the homeostasis of the gastrointestinal mucosa. Yet, despite its importance, a clear interpretation of the mechanism for collective motion in epithelial sheets remains elusive. This interpretation is prohibited by the lack of understanding of the relationship between motion and cell-cell contact, and their mediation by the mechanical properties of the underlying substrate. To better mimic physiological substrates that have inherent viscosity, we probe this relationship using polydimethylsiloxane, a substrate whose mechanical properties can be tuned from predominantly elastic to viscous by altering its cross-linking content. We therefore characterize the comparative spatiotemporal correlations in cell velocity during the movement of an epithelial monolayer as a function of the viscoelasticity of the substrate. Our results show that high correlation in cell velocity is achieved when the substrate G''(ω) is ~0.4 × G'(ω). This correlation is driven by a balance between cell-cell contact and the adhesion and contraction of the extracellular matrix. For G'(ω) > G'(ω), this balance shifts, and contraction of the tissue drives the substrate to flow, further elevating the correlation in movement.

A microfluidics assay to study invasion of human placental trophoblast cells

Pre-eclampsia, fetal growth restriction and stillbirth are major pregnancy disorders throughout the world. The underlying pathogenesis of these diseases is defective placentation characterized by inadequate invasion of extravillous placental trophoblast cells into the uterine arteries. How trophoblast invasion is controlled remains an unanswered question but is influenced by maternal uterine immune cells called decidual natural killer cells. Here, we describe an in vitro microfluidic invasion assay to study the migration of primary human trophoblast cells. Each experiment can be performed with a small number of cells making it possible to conduct research on human samples despite the challenges of isolating primary trophoblast cells. Cells are exposed to a chemical gradient and tracked in a three-dimensional microenvironment using real-time high-resolution imaging, so that dynamic readouts on cell migration such as directionality, motility and velocity are obtained. The microfluidic system was validated using isolated trophoblast and a gradient of granulocyte-macrophage colony-stimulating factor, a cytokine produced by activated decidual natural killer cells. This microfluidic model provides detailed analysis of the dynamics of trophoblast migration compared to previous assays and can be modified in future to study in vitro how human trophoblast behaves during placentation.

Interstitial fluid flow intensity modulates endothelial sprouting in restricted Src-activated cell clusters during capillary morphogenesis

Development of tissues in vitro with dimensions larger than 150 to 200 microm requires the presence of a functional vascular network. Therefore, we have studied capillary morphogenesis under controlled biological and biophysical conditions with the aim of promoting vascular structures in tissue constructs. We and others have previously demonstrated that physiological values of interstitial fluid flow normal to an endothelial monolayer in combination with vascular endothelial growth factor play a critical role during capillary morphogenesis by promoting cell sprouting. In the present work, we studied the effect that a range of interstitial flow velocities (0-50 microm/min) has in promoting the amount, length, and branching of developing sprouts during capillary morphogenesis. The number of capillary-like structures developed from human umbilical vein endothelial cell monolayers across the interstitial flow values tested was not significantly affected. Instead, the length and branching degree of the sprouts presented a significant maximum at flow velocities of 10 to 20 microm/min. More-over, at these same flow values, the phosphorylation level of Src also showed its peak. We discovered that capillary morphogenesis is restricted to patches of Src-activated cells (phosphorylated Src (pSrc)) at the monolayer, suggesting that the transduction pathway in charge of sensing the mechanical stimulus induced by flow is promoting predetermined mechanically sensitive areas (pSrc) to undergo capillary morphogenesis

On-chip assessment of human primary cardiac fibroblasts proliferative responses to uniaxial cyclic mechanical strain

Cardiac cell function is substantially influenced by the nature and intensity of the mechanical loads the cells experience. Cardiac fibroblasts (CFs) are primarily involved in myocardial tissue remodeling: at the onset of specific pathological conditions, CFs activate, proliferate, differentiate, and critically alter the amount of myocardial extra-cellular matrix with important consequences for myocardial functioning. While cyclic mechanical strain has been shown to increase matrix synthesis of CFs in vitro, the role of mechanical cues in CFs proliferation is unclear. We here developed a multi-chamber cell straining microdevice for cell cultures under uniform, uniaxial cyclic strain. After careful characterization of the strain field, we extracted human heart-derived CFs and performed cyclic strain experiments. We subjected cells to 2% or 8% cyclic strain for 24 h or 72 h, using immunofluorescence to investigate markers of cell morphology, cell proliferation (Ki67, EdU, phospho-Histone-H3) and subcellular localization of the mechanotransduction-associated transcription factor YAP. Cell morphology was affected by cyclic strain in terms of cell area, cell and nuclear shape and cellular alignment. We additionally observed a strain intensity-dependent control of cell growth: a significant proliferation increase occurred at 2% cyclic strain, while time-dependent effects took place upon 8% cyclic strain. The YAP-dependent mechano-transduction pathway was similarly activated in both strain conditions. These results demonstrate a differential effect of cyclic strain intensity on human CFs proliferation control and provide insights into the YAP-dependent mechano-sensing machinery of human CFs.

Optimisation of indices of external pneumatic compression for prophylaxis against deep vein thrombosis: radionuclide gated imaging studies

The amount and rate of blood expelled with different modes of intermittent external pneumatic compression applied to the lower leg were studied on a regional basis in a series of experiments on healthy human volunteers. Radionuclide imaging of the labelled blood pool, with acquisition of counts synchronised to the pressurisation cycle, provided data on regional blood volumes in the leg in relation to time. To determine the changes in blood volume of the lower leg resulting from external pneumatic compression labelled red blood cell counts were determined during 10 different types of compression cycle. Since venous stasis is considered to be a major cause of venous thrombosis the red blood cell counts were used to calculate regional values of the fraction of blood ejected as well as comparative indices proportional to regional flow rate, regional velocity, and regional wall shear stress. All these indices should be maximised for optimal prophylaxis against deep vein thrombosis. The four compartment cuff in each compression mode applied a mean pressure of 45 mm Hg, but different combinations of values were used for intercompartmental pressure gradation (delta p) and for intercompartmental time sequencing to the onset of compression (delta t). Uniform compression (delta p = 0; delta t = 0) was substantially inferior to cycles with gradation and sequencing. The optimal values of delta p were in the range 5-10 mm Hg and of delta t in the range 0-0.5 seconds.

Human cardiac fibroblasts adaptive responses to controlled combined mechanical strain and oxygen changes in vitro

Upon cardiac pathological conditions such as ischemia, microenvironmental changes instruct a series of cellular responses that trigger cardiac fibroblasts-mediated tissue adaptation and inflammation. A comprehensive model of how early environmental changes may induce cardiac fibroblasts (CF) pathological responses is far from being elucidated, partly due to the lack of approaches involving complex and simultaneous environmental stimulation. Here, we provide a first analysis of human primary CF behavior by means of a multi-stimulus microdevice for combined application of cyclic mechanical strain and controlled oxygen tension. Our findings elucidate differential human CFs responses to different combinations of the above stimuli. Individual stimuli cause proliferative effects (PHH3⁺ mitotic cells, YAP translocation, PDGF secretion) or increase collagen presence. Interestingly, only the combination of hypoxia and a simulated loss of contractility (2% strain) is able to additionally induce increased CF release of inflammatory and pro-fibrotic cytokines and matrix metalloproteinases.

DOI:http://dx.doi.org/10.7554/eLife.22847.001

When the supply of oxygen to the heart is reduced, its cells start to die within hours, the heart muscle becomes less able to contract, and the area becomes inflamed. This inflammation is accompanied by an influx of immune cells. It also activates other cells known as cardiac fibroblasts that help to break down the framework of molecules that supported the damaged heart tissue and replace it with a scar. This response is part of the normal repair process, but it can lead to the formation of scar tissue in non-damaged areas of the heart. Excess scar tissue makes the heart muscle less able to contract and increases the affected individual’s chance of dying.

Understanding how this repair process works is an important step in developing strategies to minimise the damage caused by coronary artery disease or heart attacks. However, existing laboratory models are only partly able to recreate the conditions seen in real heart tissue. To properly understand the response at the level of living cells, a more complete model is needed.

Ugolini et al. now report improvements to a small device, referred to as a lab-on-chip, that can subject cells to mechanical strain. The improvements mean the device could also recreate other conditions seen early on in damaged heart tissue, specifically the reduced supply of oxygen. Replicating combinations of mechanical changes and oxygen supplies meant that the impact of these conditions on human cardiac fibroblasts could be directly observed in the laboratory for the first time. Ugolini et al. found that a lack of contraction and low oxygen levels triggered the cardiac fibroblasts to produce inflammatory molecules and molecules associated with the formation of scar tissue. This resembles the response seen in living hearts.

The next step is to improve the lab-on-chip device further by adding other cell types, including heart muscle cells and immune cells. A more complete model may aid future research into how our hearts operate in both health and disease.

DOI:http://dx.doi.org/10.7554/eLife.22847.002

Activatable and Cell-Penetrable Multiplex FRET Nanosensor for Profiling MT1-MMP Activity in Single Cancer Cells

We developed a quantum-dot-based fluorescence resonance energy transfer (QD-FRET) nanosensor to visualize the activity of matrix metalloproteinase (MT1-MMP) at cell membrane. A bended peptide with multiple motifs was engineered to position the FRET pair at a close proximity to allow energy transfer, which can be cleaved by active MT1-MMP to result in FRET changes and the exposure of cell penetrating sequence. Via FRET and penetrated QD signals, the nanosensor can profile cancer cells.

Tension, free space, and cell damage in a microfluidic wound healing assay

We use a novel, microfluidics-based technique to deconstruct the classical wound healing scratch assay, decoupling the contribution of free space and cell damage on the migratory dynamics of an epithelial sheet. This method utilizes multiple laminar flows to selectively cleave cells enzymatically, and allows us to present a 'damage free' denudation. We therefore isolate the influence of free space on the onset of sheet migration. First, we observe denudation directly to measure the retraction in the cell sheet that occurs after cell-cell contact is broken, providing direct and quantitative evidence of strong tension within the sheet. We further probe the mechanical integrity of the sheet without denudation, instead using laminar flows to selectively inactivate actomyosin contractility. In both cases, retraction is observed over many cell diameters. We then extend this method and complement the enzymatic denudation with analogies to wounding, including gradients in signals associated with cell damage, such as reactive oxygen species, suspected to play a role in the induction of movement after wounding. These chemical factors are evaluated in combination with the enzymatic cleavage of cells, and are assessed for their influence on the collective migration of a non-abrasively denuded epithelial sheet. We conclude that free space alone is sufficient to induce movement, but this movement is predominantly limited to the leading edge, leaving cells further from the edge less able to move towards the wound. Surprisingly, when coupled with a gradient in ROS to simulate the chemical effects of abrasion however, motility was not restored, but further inhibited.

Periodic flow at airway bifurcations. II. Flow partitioning

The distribution of flow among parallel pathways is believed to be determined by the balance of downstream mechanical loads or time constants. We studied the influence of upstream flow conditions and airway geometry vs. downstream mechanical impedances in determining flow partitioning at airway bifurcations. Each model consisted of a single rigid bifurcation with various branching angles and area ratios but having identical pathway impedances. Sinusoidal volumetric oscillations were applied at the parent duct with various frequencies and tidal volumes. Measuring the terminal pressures continuously, we calculated the flow distribution. When flow amplitude was small, flow partitioning was homogeneous and synchronous, as expected in a system possessing homogeneous pathway impedances and time constants. But when flow amplitude was large and frequency was high, appreciable heterogeneity and asynchrony of flow partitioning arose; during midinspiration the high-velocity flow stream preferentially favored the axial pathway. This effect vanished in the absence of a net area change at the bifurcation. For a given bifurcation geometry, these observations could be organized using only two nondimensional parameters, neither of which incorporated consideration of fluid friction. The description of temporal events required, in addition, a nondimensional time. Therefore these flow-dependent phenomena and their underlying mechanisms differ fundamentally from those described in classical impedance models. The complex pattern of nonuniform interregional behaviors apparent in whole lungs when tidal volume and frequency are large (Allen et al., J. Clin. Invest. 76: 620-629, 1985) is reiterated faithfully in models consisting of only two compartments with homogeneous time constants. As such, the behaviors observed in lungs would appear to be attributable in large part to fluid dynamic factors in central airways.

The role of soluble proteins in generating aqueous outflow resistance in the bovine and human eye

Previous research has shown that wash-out in bovine and primate eyes can be greatly reduced by perfusing with buffer containing 5-15% serum. It was suggested that protein diffusion from the iris root might raise the in vivo protein concentration in the trabecular meshwork to a level much higher than in the anterior chamber. In this study, we investigated the protein concentration in effluent from the outflow pathways in bovine and human eyes, its possible relationship to wash-out, and whether the reduction of wash-out was caused by a bulk protein effect. Bovine and human eyes were placed under silicone oil and perfused with buffer. Outflow facility was continuously determined while effluent was periodically collected from the surface of the eye, and the soluble protein concentration in the effluent was determined. Separate studies were conducted perfusing either albumin or gamma-globulin through bovine eyes. Theoretical models were developed to study the transport of protein into the perfusion fluid. In the bovine eyes, the initial protein concentration in the collected effluent was approximately 1% that of serum, much lower than the 10-15% buffer in serum required to prevent wash-out. Furthermore, the rate of change of outflow facility showed a different dependence on perfused volume than did the protein concentration. Human eyes showed a much higher level of protein in the perfusate, that decayed over a much longer time period. A statistically significant correlation existed between outflow resistance and soluble protein concentration in both bovine and human eyes. However, modelling studies suggested that this correlation might be due to flow resistance setting the flowrate which then determines the protein concentration of the effluent. Separate experiments indicated that the decreased rate of wash-out caused by perfusion of 10-15% serum in buffer was not due to either albumin or gamma-globulin alone. These results suggest that the reduction of wash-out observed in previous studies when serum proteins were perfused through bovine and monkey eyes was not due to the general level of serum proteins but may instead be due to interactions of a particular protein(s).

Pulmonary-arterial-hypertension (PAH)-on-a-chip: fabrication, validation and application

Currently used animal and cellular models for pulmonary arterial hypertension (PAH) only partially recapitulate its pathophysiology in humans and are thus inadequate in reproducing the hallmarks of the disease, inconsistent in portraying the sex-disparity, and unyielding to combinatorial study designs. Here we sought to deploy the ingenuity of microengineering in developing and validating a tissue chip model for human PAH. We designed and fabricated a microfluidic device to emulate the luminal, intimal, medial, adventitial, and perivascular layers of a pulmonary artery. By growing three types of pulmonary arterial cells (PACs)-endothelial, smooth muscle, and adventitial cells, we recreated the PAH pathophysiology on the device. Diseased (PAH) PACs, when grown on the chips, moved of out their designated layers and created phenomena similar to the major pathologies of human PAH: intimal thickening, muscularization, and arterial remodeling and show an endothelial to mesenchymal transition. Flow-induced stress caused control cells, grown on the chips, to undergo morphological changes and elicit arterial remodeling. Our data also suggest that the newly developed chips can be used to elucidate the sex disparity in PAH and to study the therapeutic efficacy of existing and investigational anti-PAH drugs. We believe this miniaturized device can be deployed for testing various prevailing and new hypotheses regarding the pathobiology and drug therapy in human PAH.

Stochastic modeling and identification of emergent behaviors of an Endothelial Cell population in angiogenic pattern formation

Despite a high level of stochasticity and heterogeneity, a population of biological cells can collectively construct a complex structure that emerges from individual cell behaviors. Endothelial Cells (ECs), for example, create a vascular network with a tubular structure through interactions with the surrounding scaffold and other cells. Individual cells make a series of discrete decisions whether to migrate, proliferate, or die, leading to network pattern formation. This paper presents a methodology for deriving agent behavior models from EC time lapse data in an in vitro micro-fluidic environment. Individual cells are modeled as stochastic agents that detect growth factors (chemical molecules) and the scaffold conditions, and that make stochastic phenotype state transitions. Based on observed behaviors, a model is obtained for predicting the behavior of a population of interacting cells, which will sprout out, form a tubular structure, and create a branch to generate a vascular network − the process referred to as angiogenesis. A Maximum Likelihood method for estimating model parameters from angiogenesis process time lapse data is then presented. The identified mechanism of emergent pattern formation, although investigated in the context of angiogenesis, provides useful insights for swarm and modular robotics.

Emergent mechanical control of vascular morphogenesis

Vascularization is driven by morphogen signals and mechanical cues that coordinately regulate cellular force generation, migration, and shape change to sculpt the developing vascular network. However, it remains unclear whether developing vasculature actively regulates its own mechanical properties to achieve effective vascularization. We engineered tissue constructs containing endothelial cells and fibroblasts to investigate the mechanics of vascularization. Tissue stiffness increases during vascular morphogenesis resulting from emergent interactions between endothelial cells, fibroblasts, and ECM and correlates with enhanced vascular function. Contractile cellular forces are key to emergent tissue stiffening and synergize with ECM mechanical properties to modulate the mechanics of vascularization. Emergent tissue stiffening and vascular function rely on mechanotransduction signaling within fibroblasts, mediated by YAP1. Mouse embryos lacking YAP1 in fibroblasts exhibit both reduced tissue stiffness and develop lethal vascular defects. Translating our findings through biology-inspired vascular tissue engineering approaches will have substantial implications in regenerative medicine.

The specific hydraulic conductivity of bovine serum albumin

Previous studies of extracellular matrix hydraulic conductivity have characterized the flow resistance of glycosaminoglycans, proteoglycans and collagen. This work focuses on serum albumin, present in significant quantities in many connective tissues, but not previously considered for its role in determining connective tissue flow resistance. The specific hydraulic conductivity of bovine serum albumin solutions, as a function of concentration, was calculated from sedimentation and ultrafiltration data available in the literature. A rigid particle hydrodynamic model compared favorably with these results. Experimental measurements on an albumin ultrafiltration cell were in agreement with this model (within experimental error); furthermore, the experimental data confirmed the theoretical prediction that there is no (or negligible) pressure drop through the concentration polarization layer. Use of the hydrodynamic model for albumin specific hydraulic conductivity with literature values for the hindrance of albumin when passing through a glycosaminoglycan (GAG) matrix allows an estimate of the relative importance of the albumin on tissue hydraulic conductivity: in non-cartilaginous tissues with moderate GAG concentrations, tissue levels of albumin can generate flow resistance effects comparable to those of the GAGs, although well less than the flow resistance of these tissues.

Endothelium and Subendothelial Matrix Mechanics Modulate Cancer Cell Transendothelial Migration

Cancer cell extravasation, a key step in the metastatic cascade, involves cancer cell arrest on the endothelium, transendothelial migration (TEM), followed by the invasion into the subendothelial extracellular matrix (ECM) of distant tissues. While cancer research has mostly focused on the biomechanical interactions between tumor cells (TCs) and ECM, particularly at the primary tumor site, very little is known about the mechanical properties of endothelial cells and the subendothelial ECM and how they contribute to the extravasation process. Here, an integrated experimental and theoretical framework is developed to investigate the mechanical crosstalk between TCs, endothelium and subendothelial ECM during in vitro cancer cell extravasation. It is found that cancer cell actin-rich protrusions generate complex push-pull forces to initiate and drive TEM, while transmigration success also relies on the forces generated by the endothelium. Consequently, mechanical properties of the subendothelial ECM and endothelial actomyosin contractility that mediate the endothelial forces also impact the endothelium's resistance to cancer cell transmigration. These results indicate that mechanical features of distant tissues, including force interactions between the endothelium and the subendothelial ECM, are key determinants of metastatic organotropism.

A microfluidic device to investigate axon targeting by limited numbers of purified cortical projection neuron subtypes

While much is known about general controls over axon guidance of broad classes of projection neurons (those with long-distance axonal connections), molecular controls over specific axon targeting by distinct neuron subtypes are poorly understood. Corticospinal motor neurons (CSMN) are prototypical and clinically important cerebral cortex projection neurons; they are the brain neurons that degenerate in amyotrophic lateral sclerosis (ALS) and related motor neuron diseases, and their injury is central to the loss of motor function in spinal cord injury. Primary culture of purified immature murine CSMN has been recently established, using either fluorescence-activated cell sorting (FACS) or immunopanning, enabling a previously unattainable level of subtype-specific investigation, but the resulting number of CSMN is quite limiting for standard approaches to study axon guidance. We developed a microfluidic system specifically designed to investigate axon targeting of limited numbers of purified CSMN and other projection neurons in culture. The system contains two chambers for culturing target tissue explants, allowing for biologically revealing axonal growth "choice" experiments. This device will be uniquely enabling for investigation of controls over axon growth and neuronal survival of many types of neurons, particularly those available only in limited numbers.

Mentoring and Education: A Lifetime of Experience and Learning

As recipient of the 2018 Robert M. Nerem Education and Mentorship Medal from the ASME, I was asked to prepare an article to contribute my reflections on these topics, that arise whenever we offer advice and guidance to our younger colleagues. This represents my personal views on Bob Nerem, after whom the award is named, my experiences that have impacted me as a mentor, and some words of advice, offered cautiously and with qualifications, with regard to best practices in mentoring.