Unexpected synergistic and antagonistic antibiotic activity against Staphylococcus biofilms

Objectives

To evaluate putative anti-staphylococcal biofilm antibiotic combinations used in the management of periprosthetic joint infections (PJIs).

Methods

Using the dissolvable bead biofilm assay, the minimum biofilm eradication concentration (MBEC) was determined for the most commonly used antimicrobial agents and combination regimens against staphylococcal PJIs. The established fractional inhibitory concentration (FIC) index was modified to create the fractional biofilm eradication concentration (FBEC) index to evaluate synergism or antagonism between antibiotics.

Results

Only gentamicin (MBEC 64 mg/L) and daptomycin (MBEC 64 mg/L) were observed to be effective antistaphylococcal agents at clinically achievable concentrations. Supplementation of gentamicin with daptomycin, vancomycin or ciprofloxacin resulted in a similar or lower MBEC than gentamicin alone (FBEC index 0.25-2). Conversely, when rifampicin, clindamycin or linezolid was added to gentamicin, there was an increase in the MBEC of gentamicin relative to its use as a monotherapy (FBEC index 8-32).

Conclusions

This study found that gentamicin and daptomycin were the only effective single-agent antibiotics against established Staphylococcus biofilms. Interestingly the addition of a bacteriostatic antibiotic was found to antagonize the ability of gentamicin to eradicate Staphylococcus biofilms.

Activity levels and return to work after revision total hip and knee arthroplasty in patients under 65 years of age

Aims

The aim of this study was to identify predictors of return to work (RTW) after revision lower limb arthroplasty in patients of working age in the United Kingdom.

Patients and Methods

We assessed 55 patients aged ≤ 65 years after revision total hip arthroplasty (THA). There were 43 women and 12 men with a mean age of 54 years (23 to 65). We also reviewed 30 patients after revision total knee arthroplasty (TKA). There were 14 women and 16 men with a mean age of 58 years (48 to 64). Preoperatively, age, gender, body mass index, social deprivation, mode of failure, length of primary implant survival, work status and nature, activity level (University of California, Los Angeles (UCLA) score), and Oxford Hip and Knee Scores were recorded. Postoperatively, RTW status, Oxford Hip and Knee Scores, EuroQol-5D (EQ-5D), UCLA score, and Work, Osteoarthritis and Joint-Replacement Questionnaire (WORQ) scores were obtained. Univariate and multivariate analysis was performed.

Results

Overall, 95% (52/55) of patients were working before their revision THA. Afterwards, 33% (17/52) RTW by one year, 48% (25/52) had retired, and 19% (10/52) were receiving welfare benefit. RTW was associated with age, postoperative Oxford Hip Score, early THA failure (less than two years), mode of failure dislocation, and contralateral revision (p < 0.05). No patient returned to work after revision for dislocation. Only age remained a significant factor on multivariate analysis (p = 0.003), with 79% (11/14) of those less than 50 years of age returning to work, compared with 16% (6/38) of those aged fifty years or over. Before revision TKA, 93% (28/30) of patients were working. Postoperatively only 7% (2/28) returned to work by one year, 71% (20/28) had retired, and 21% (6/28) were receiving welfare benefits. UCLA scores improved after 43% of revision THAs and 44% of revision TKAs.

Conclusion

After revision THA, age is the most significant predictor of RTW: only 16% of those over 50 years old return to work. Fewer patients return to work after early revision THA and none after revision for dislocation. After revision TKA, patients rarely return to work: none return to heavy or moderate manual work. Cite this article: Bone Joint J 2018;100-B:1043-53.

Activity levels and return to work following total knee arthroplasty in patients under 65 years of age

Aims

Little is known about employment following total knee arthroplasty (TKA). This study aims to identify factors which predict return to work following TKA in patients of working age in the United Kingdom.

Patients & Methods

We prospectively assessed 289 patients (289 TKAs) aged ≤ 65 years who underwent TKA between 2010 and 2013. There were 148 women. The following were recorded pre-operatively: age, gender, body mass index, social deprivation, comorbidities, indication for surgery, work status and nature of employment, activity level as assessed by the University of California, Los Angeles (UCLA) activity score and Oxford Knee Score (OKS). The intention of patients to return to work or to retire was not assessed pre-operatively. At a mean of 3.4 years (2 to 4) post-operatively, the return to work status, OKS, the EuroQol-5 dimensions (EQ-5D) score, UCLA activity score and Work, Osteoarthritis and joint-Replacement (WORQ) score were obtained. Univariate and multivariate analyses were performed.

Results

Of 261 patients (90%) who were working before TKA, 105 (40%) returned to any job, including 89 (34%) who returned to the same job at a mean of 13.5 weeks (2 to 104) post-operatively. A total of 108 (41%) retired following TKA and 18 remained on welfare. Patients not working before the operation did not return to work. Median UCLA scores improved in 125 patients (58%) from 4 (mild activity) to 6 (moderate activity) (p < 0.001). Significant (p < 0.05) factors which were predictive of return to any work included age, heavy or moderate manual work, better post-operative UCLA, OKS and EQ-5D general health scores. Significant predictive factors of return to the same work included age, heavy or moderate manual work and post-operative OKS. Multivariate analysis confirmed heavy or moderate manual work and age to independently predict a return to either any or the same work. All patients aged < 50 years who were working pre-operatively returned to any work as did 60% of those aged between 50 and 54 years, 50% of those aged between 55 and 59 years and 24% those aged between 60 and 65 years.

Conclusion

If working pre-operatively, patients aged < 50 years invariably returned to work following TKA, but only half of those aged between 50 to 60 years returned. High post-operative activity levels and patient reported outcome measures do not predict return to work following TKA. Cite this article: Bone Joint J 2017;99-B:1037–46.

Predicting dissatisfaction following total knee arthroplasty in patients under 55 years of age

AIMS

Risk of revision following total knee arthroplasty (TKA) is higher in patients under 55 years, but little data are reported regarding non-revision outcomes. This study aims to identify predictors of dissatisfaction in these patients.

PATIENTS AND METHODS

We prospectively assessed 177 TKAs (157 consecutive patients, 99 women, mean age 50 years; 17 to 54) from 2008 to 2013. Age, gender, implant, indication, body mass index (BMI), social deprivation, range of movement, Kellgren-Lawrence (KL) grade of osteoarthritis (OA) and prior knee surgery were recorded. Pre- and post-operative Oxford Knee Score (OKS) as well as Short Form-12 physical (PCS) and mental component scores were obtained. Post-operative range of movement, complications and satisfaction were measured at one year.

RESULTS

Overall, 44 patients with 44 TKAs (24.9%) under 55 years of age were unsure or dissatisfied with their knee. Significant predictors of dissatisfaction on univariate analysis included: KL grade 1/2 OA (59% dissatisfied), poor pre-operative OKS, complications, poor improvements in PCS and OKS and indication (primary OA 19% dissatisfied, previous meniscectomy 41%, multiply operated 42%, other surgery 29%, BMI > 40 kg/m² 31%, post-traumatic OA 45%, and inflammatory arthropathy 5%). Poor pre-operative OKS, poor improvement in OKS and post-operative stiffness independently predicted dissatisfaction on multivariate analysis.

CONCLUSION

Patients receiving TKA younger than 55 years old should be informed about the increased risks of dissatisfaction. Offering TKA in KL 1/2 is questionable, with a dissatisfaction rate of 59%. Cite this article: Bone Joint J 2016;98-B:1625-34.

Outcomes following excision of Morton's interdigital neuroma: a prospective study

AIMS

This is the first prospective study to report the pre- and post-operative patient reported outcomes and satisfaction scores following excision of interdigital Morton's neuroma.

PATIENTS AND METHODS

Between May 2006 and April 2013, we prospectively studied 99 consecutive patients (111 feet) who were to undergo excision of a Morton's neuroma. There were 78 women and 21 men with a mean age at the time of surgery of 56 years (22 to 78). Patients completed the Manchester-Oxford Foot Questionnaire (MOXFQ), Short Form-12 (SF-12) and a supplementary patient satisfaction survey three months pre-operatively and six months post-operatively.

RESULTS

Statistically significant differences were found between the mean pre- and post-operative MOXFQ and the physical component of the SF-12 scores (p = 0.00081 and p = 0.00092 respectively). Most patients reported their overall satisfaction as excellent (n = 49, 49.5%) or good (n = 29, 29.3%), but ten patients were dissatisfied, reporting poor (n = 8, 8.1%) or very poor (n = 2, 2.0%) results. Only 63 patients (63%) were pain-free at follow-up: in eight patients (8.1%), the MOXFQ score worsened. There was no statistically significant difference in outcome between surgery on single or multiple sites. However, the MOXFQ scores were significantly worse after revision surgery (p = 0.004).

CONCLUSIONS

The patient-reported outcomes after resection of a symptomatic Morton's neuroma are acceptable but may not be as good as earlier studies suggest. Surgery at several sites can be undertaken safely but caution should be exercised when considering revision surgery. Cite this article: Bone Joint J 2016;98-B:1376-81.

Fracture characteristics of acrylic bone cement-bone composites

In this study, the fracture properties of Perspex®, acrylic bone cement prepared using a commercially available reduced pressure mixing system and a bone cement-bone composite were compared under different test conditions. The method used was the double-torsion (DT) test. The observations made from this investigation are as follows. The fracture toughness and critical crack length for Perspex® significantly increased (ANOVA, p = 0.001) when tested in water compared to air. An increase in test temperature from 19 to 37°C resulted in a decrease in the fracture properties in water, this reduction being also statistically significant (ANOVA, p = 0.02). The mean fracture toughness and standard deviation of CMW3TM bone cement when mixed under reduced pressure was 2.19 ± 0.11 MN m−3/2 compared to 3.89 ± 0.10 MN m−3/2 for the cement-bone composite (ANOVA, p = 0.004). The crack length determined for CMW3TM bone cement and the cement-bone composite were 0.323 ± 0.031 and 1.1434 ± 0.61 mm respectively. The plateau loads of the composite material were higher than measured for the monolithic acrylic bone cement, 249.66 ± 67.75 N compared with 140.83 ± 6.82 N. The high level of variation recorded for the plateau loads of the bone cement-bone composite is due to the orientation and volume fraction of the cancellous bone. It can be concluded from this investigation that acrylic bone cement interdigitation into the cancellous bone results in a superior material with respect to crack resistance in comparison with the bone cement as a lone entity. Therefore it is an advantage if there is sufficient cancellous bone stock available within the intermedullary canal to allow bone cement penetration to occur, for the transfer of loads during daily activity. Additionally, it is paramount that the clinician ensures that adequate pressure is applied and maintained for an appropriate time during cement injection and prosthesis insertion in order to ensure optimum cement penetration into the pore openings of the cancellous bone, thus improving the resistance of the cement mantle to fracture and ultimately improving the longevity of the joint replacement.

S3-Guideline non-traumatic adult femoral head necrosis

INTRODUCTION

The treatment of adult non-traumatic avascular necrosis of the femoral head (AVN; N-ANFH) within an estimated incidence of 5000-7000 cases per annum in Germany remains a challenge. Risk factors include steroids, alcohol abuse, chemotherapy and immunosuppressive medication, but a genetic predisposition has been suggested. Early diagnosis of this often bilateral disease process is essential for successful conservative or joint preserving surgical management. In this review, we present the update German consensus S3 guideline "diagnosis and management for N-ANFH" as a concise summary.

MATERIALS AND METHODS

This systematic review is based on the published literature from January 1, 1970 to April 31, 2013 (German and English language). Inclusion criteria were systematic reviews, meta-analyses and relevant peer review publications. We identified a total of 3715 related publications, of which 422 were suitable according to the SIGN criteria, but only 159 fulfilled our inclusion criteria.

RESULTS AND CONCLUSIONS

Clinical suspicion of N-ANFH mandates radiographic evaluation. If radiographs are normal MRI scans are recommended, which should be evaluated according to the ARCO-classification. Differential diagnoses include transient osteoporosis, bone bruise, insufficiency fracture and destructive arthropathy. Untreated, subchondral fractures commonly occur within 2 years, during which the risk for contralateral involvement is high-thereafter unlikely. Conservative management with Ilomedin and Alendronat can be tried, but other pharmacological or physical treatments are inappropriate. No specific joint preserving procedure can be recommended, but core decompression should be considered in early stages if necrosis is <30 %. In ARCO stages IIIc or IV total hip arthroplasty (THA) should be contemplated, which offers similar outcome compared to osteoarthritis. Young age is the main risk factor for higher revision rates after THA for N-ANFH.

Total hip replacement: increasing femoral offset improves functional outcome

INTRODUCTION

The aim of this study was to assess the independent effect of radiographic measures of implant position, relative to pre-operative anatomical assessment, on the functional outcome of total hip arthroplasty according to change in the Oxford hip score (OHS) 1 year post surgery.

METHODS

A prospective cohort study was preformed to assess whether improvement in functional outcome (change in OHS at 1 year) and the relationship with femoral offset and length, and acetabular offset and height. After a power calculation 359 patients were recruited to the study and radiographic measures were performed by blinded observers. Regression analysis was used to assess the independent effect of the four radiographic measurements after adjusting for confounding variables.

RESULTS

There was a significant (p < 0.001) decrease in acetabular offset [5.3 mm, 95 % confidence interval (CI) 4.4-6.2] and increase in femoral offset (6.1 mm, 95 % CI 5.4-6.8). Hence there was no significant change in overall offset. Femoral offset was the only radiographic measure to be achieved statistical significance (r = 0.198, 95 % CI 0.063-0.333, p = 0.004) in relation to clinical outcome, with increasing offset being associated with a greater improvement in the OHS. On combining femoral and acetabular offset increasing offset was associated with a greater improvement in the OHS (r = 0.10, 95 % CI 0.01-0.19, p = 0.04).

CONCLUSION

This study supports the long-held biomechanical theory of medialisation of the acetabular component with compensatory increased femoral offset results in improved functional outcome.

Diabetes does not influence the early outcome of total knee replacement: a prospective study assessing the Oxford knee score, short form 12, and patient satisfaction

BACKGROUND

There is conflicting evidence as to whether diabetes mellitus influences the functional outcome and patient satisfaction after a total knee replacement (TKR). The aim of this study was to assess the effect of diabetes upon the Oxford knee score (OKS), short form (SF)-12, and patient satisfaction after TKR.

METHODS

Prospective pre- and post-operative (one year) OKS and SF-12 scores for 2389 patients undergoing primary TKR were compiled, of which 275 (12%) patients suffered with diabetes. Patient satisfaction was assessed at one year.

RESULTS

Patients with diabetes were more likely to have a greater level of comorbidity (p<0.001), and a worse pre-operative OKS and SF-12 score (p<0.02), compared to those patients without diabetes. Diabetes was not a significant (p>0.41) independent predictor of post-operative OKS or the SF-12 physical score on multivariable analysis. Although, factors more prevalent within the diabetic cohort (heart disease, vascular disease, liver disease, anaemia, depression, back pain, worse pre-operative OKS and SF-12 score) were found to be independent predictors of post-operative OKS and SF-12 physical score. Interestingly, diabetes was associated with a significantly greater improvement in mental wellbeing (SF-12 mental component), which was confirmed on multivariable analysis. Patient satisfaction was not influenced by a concomitant diagnosis of diabetes (p=0.57).

CONCLUSION

The outcome of TKR as assessed by the OKS, SF-12, and overall patient satisfaction rates are not influenced by diabetes per se, although factors more prevalent within this population result in a worse post-operative outcome.

LEVEL OF EVIDENCE

prospective cohort study, level III.

Return to work and sports after total hip replacement

INTRODUCTION

Expectations of patients requiring total hip replacement have become higher than in the past and are often well beyond pain relief and improved mobility. Return to work and sporting activity are important factors to be considered when advising patients preoperatively. The objective of this study was to analyse the return to sports and work rates in patients still in employment and to analyse potential influencing factors.

MATERIALS AND METHODS

Patients under the age of 65 who had a total hip replacement performed at a university teaching hospital were identified from the local arthroplasty database and contacted. Pre and postoperative levels of sporting activity and work were recorded. We also recorded the time point at which they returned to these activities.

RESULTS

285 total hip replacements were carried out on 239 patients. At the time of follow-up 170 of the patients were working. The mean length of time to return to work was 13.9 weeks (SD 7.7). 78 % returned to work without any restrictions, 18.6 % in heavy manual jobs. The mean time taken to return to sports or similar physical activities was 18.8 weeks (SD 8.8) weeks. Those with a lower body mass index returned to work and sporting activities faster.

CONCLUSIONS

Our data show that the majority of patients undergoing total hip replacement can expect to return to work and sporting activities within 4-6 months. Activities at work are often initially limited and physical performance may not fully return to the expected level. Patients with a high body mass index take longer to return to work and sporting activities.

Socioeconomic status affects the Oxford knee score and short-form 12 score following total knee replacement

We assessed the effect of social deprivation upon the Oxford knee score (OKS), the Short-Form 12 (SF-12) and patient satisfaction after total knee replacement (TKR). An analysis of 966 patients undergoing primary TKR for symptomatic osteoarthritis (OA) was performed. Social deprivation was assessed using the Scottish Index of Multiple Deprivation. Those patients that were most deprived underwent surgery at an earlier age (p = 0.018), were more likely to be female (p = 0.046), to endure more comorbidities (p = 0.04) and to suffer worse pain and function according to the OKS (p < 0.001). In addition, deprivation was also associated with poor mental health (p = 0.002), which was assessed using the mental component (MCS) of the SF-12 score. Multivariable analysis was used to identify independent predictors of outcome at one year. Pre-operative OKS, SF-12 MCS, back pain, and four or more comorbidities were independent predictors of improvement in the OKS (all p < 0.001). Pre-operative OKS and improvement in the OKS were independent predictors of dissatisfaction (p = 0.003 and p < 0.001, respectively). Although improvement in the OKS and dissatisfaction after TKR were not significantly associated with social deprivation per se, factors more prevalent within the most deprived groups significantly diminished their improvement in OKS and increased their rate of dissatisfaction following TKR.

Total hip arthroplasty: to cement or not to cement the acetabular socket? A critical review of the literature

The optimal method for acetabular socket fixation remains controversial. We present a critical analysis of the current evidence from a systemic literature review of comparative studies, long-term case series, prior literature reviews, meta-analysis, and national arthroplasty registry data for cemented and uncemented acetabular components to determine the respective survivorship rates, overall risk of re-operation, dislocation rates, and wear-related complications. Using contemporary techniques, both cemented and uncemented sockets can yield good long-term results, but our evaluation suggests that the overall/all cause re-operation risk is lower for cemented fixation. Until and unless crosslinked polyethylene (PE) liners or alternative bearings can prove to yield superior outcome in the future, the cemented PE cup remains the gold standard, in all age groups, by which every acetabular component should be compared.

The minipig model for experimental chondral and osteochondral defect repair in tissue engineering: retrospective analysis of 180 defects

Articular cartilage repair is still a challenge in orthopaedic surgery. Although many treatment options have been developed in the last decade, true regeneration of hyaline articular cartilage is yet to be accomplished. In vitro experiments are useful for evaluating cell-matrix interactions under controlled parameters. When introducing new treatment options into clinical routine, adequate animal models are capable of closing the gap between in vitro experiments and the clinical use in human beings. We developed an animal model in the Göttingen minipig (GMP) to evaluate the healing of osteochondral or full-thickness cartilage defects. The defects were located in the middle third of the medial portion of the patellofemoral joint at both distal femurs. Chondral defects were 6.3 mm, osteochondral defects either 5.4 or 6.3 mm in diameter and 8 or 10 mm deep. In both defects the endogenous repair response showed incomplete repair tissue formation up to 12 months postoperatively. Based on its limited capability for endogenous repair of chondral and osteochondral defects, the GMP is a useful model for critical assessment of new treatment strategies in articular cartilage tissue engineering.

[The cemented MS-30 stem. A multi-surgeon series of 333 consecutive cases]

INTRODUCTION

So far there is only one peer-reviewed long-term publication from the inventors' clinic for the MS-30 stem.

MATERIAL AND METHODS

In a retrospective study we followed the first 333 consecutive MS-30 stems. All patients with 5- to 11-year follow-up were clinically and radiographically evaluated. At the time of implantation the criteria of modern cementing techniques were not implemented. Clinical evaluation was done using the scores of Harris and Merle d'Aubigné and Postel. Radiographic evaluation included quality of the cement mantle (true lateral radiographs taken under fluoroscopy), stem subsidence, loosening signs, and the risk for pending failure.

RESULTS

At follow-up 12 hips had undergone femoral revision: 3 for aseptic loosening, 6 for infection, 1 for periprosthetic fracture, and 2 for recurrent dislocation. The overall survival for all reasons at 10 years was 96.1%; survival with aseptic loosening as an end point was 99.0%. The median Harris Hip Score at follow-up was 80 (26-100) points. Radiological evaluation revealed a thin cement mantle (<2 mm) in approximately 2/3, predominantly on the lateral views (Gruen zones 8/9). One-third of all reviewed prostheses were considered at risk for pending failure, which strongly correlated with the initial quality of the cement mantle.

CONCLUSION

Midterm results with the MS-30 stem are encouraging and an even better long-term outcome can be expected with a better cement technique.

[Modified Hardinge approach with limited incision]

BACKGROUND

The technique of a minimally invasive anterolateral, intracapsular, modified Hardinge approach with transosseous refixation developed by the senior author is described in detail.

MATERIAL AND METHODS

Clinical and radiographic data after cemented total hip arthroplasty reveal adequate outcome without increased complication rates despite limited incision technique (average 10 cm). This technique can be safely applied by surgeons in training and performed in acceptable operating times.

RESULTS

A comparison of the described technique to a standard incision cannot be made from our data, but current literature suggests the main benefit to be cosmetic. A technically well performed operation with adequate long-term outcome remains far more important than a short incision.

[The influence of jet-lavage systems on in vitro cement penetration]

The benefit of pulsatile lavage on cement penetration in femoral cancellous bone is well known. The aim of this study was to determine the influence of different jet-lavage systems on cement penetration in a standardized cadaver study. Four different jet-lavage systems were compared (right vs left) in 30 paired human femora. After broaching, the femoral canal was lavaged with 1 l saline. The specimens were embedded in plastic pots, bone cement was applied in a retrograde manner and cement was pressurized using a standard pressure protocol with a constant force of 3,000 N. Horizontal sections were obtained at predefined levels using an automatic saw. Microradiographs were taken and analysed using image analysis to assess the extent of cement penetration. There were no significant differences in cement penetration into cancellous bone using the different jet-lavage systems. This technique is of great importance for obtaining a good interdigitation with cancellous bone. The different jet-lavage systems investigated in our study, however, seemed to be equally effective.

[In vitro elution and mechanical properties of antibiotic-loaded SmartSet HV and Palacos R acrylic bone cements]

BACKGROUND

The continuing emergence of new bone cements with additional antibiotics makes it important to establish which one will provide the most favourable antibiotic elution. An in vitro antibiotic elution and mechanical study was therefore carried out to compare a newer bone cement, SmartSet, with the established Palacos R cement.

METHODS

Samples were prepared with each cement adding 1 g gentamicin, 1 g of vancomycin, or 1 g of gentamicin and vancomycin. The samples were analysed using fluorescence polarisation immunoassay. Mechanical tests were performed to determine whether any significant degradation in the cement strength occurred following addition of the antibiotic.

RESULTS

With regards to gentamicin release Palacos R eluted significantly more antibiotic over the study period than SmartSet (p<0.001). Both cements eluted significantly more gentamicin when two antibiotics were added. With respect to vancomycin release there was no significant difference. Palacos R was significantly stronger than SmartSet in the 4-point bending test when the gentamicin + vancomycin antibiotic groups were compared (p=0.01). Palacos R also demonstrated a higher elastic modulus than SmartSet when the gentamicin and gentamicin + vancomycin groups were compared (p=0.03, p=0.005).

CONCLUSIONS

Gentamcin shows better release characteristics from Palacos R. Both cements exhibited synergistic release of combined antibiotics.

[Is computer navigation a useful tool in unicompartmental knee arthroplasty? A pilot cadaver study]

We conducted this pilot cadaver study to investigate whether the use of a navigation system during minimally invasive unicompartmental knee arthroplasty leads to more consistent results than the conventional hand-guided technique. We describe the accuracy of implant positioning in using standard instrumentation and computer navigation. Radiographic assessment showed that accurate component placement was achieved using both methods. These results were not statistically significant. The computer navigated femoral component placement without intramedullary (IM) rod was as accurate as the conventional method with IM rod. The study showed that computer navigation can produce accurate results even without an intramedullary rod. Image guidance can maintain the accuracy of the standard instrumentation and enhance 3D vision and the intraoperative orientation of the surgeon.

[Observations of normal and ACL-deficient knee joints after stress MRI]

BACKGROUND

The Lachman test is the most reliable clinical test for diagnosing rupture of the anterior cruciate ligament (ACL). Previous X-ray studies have presented a "radiologic Lachman test". Recently anterior tibial translation was demonstrated using open access MRI. Two methods were developed to transfer a similar technique to a more widely available closed MRI.

METHODS

Using closed MRI we investigated 22 knees in 21 patients with pure rupture of the ACL. Anteriorly and posteriorly directed shear forces were applied to the tibiofemoral joint at 20 degrees flexion either by positioning a 9-kg load on the distal femur (method 1) or performing a semi-manual Lachman test with a custom-made orthosis (method 2).

RESULTS

Both methods produced relative anterior tibial translation in both compartments of the normal and ACL-deficient knee which could be measured on sagittal images. They were greater laterally than medially and in injured than in uninjured knees. However, instability of the medial compartment predicted clinical and symptomatic instability as translation was posterior to positions achieved in normal knees during the active and passive flexion arc.

CONCLUSION

A Lachman sign can be produced in a closed magnet with different methods and findings can be used for more precise information regarding kinematics and degree of instability and could be helpful if surgical treatment is necessary.

Einfluss der femoralen Zementiertechnik auf das Zementierergebnis

METHODS

To evaluate the penetration depth of cement into trabecular femoral bone, femora of 14 sheep were subjected to simultaneous bilateral cementing. After femoral neck osteotomy, preparation of the bone cavities and jet lavage, cement was applied simultaneously using the conventional retrograde method for one side and vacuum application for the contralateral limb. Bilateral simultaneous pressurisation was then applied. All femoral specimens were X-rayed, sawed into standardised, horizontal, stereometric, identical slices and microradiographed. Cement penetration was assessed using a morphometric software system.

RESULTS

No significant differences in depth of cement penetration between sheep femora cemented with the vacuum application method and the standard retrograde method could be found or between the ratio of cement-consolidated and non-cement-consolidated cancellous bone.

CONCLUSION

The more complicated and technically challenging method of cement application under vacuum had no advantage in terms of cement interdigitation over the standard retrograde method.

[Cemented total hip arthroplasty in Germany--an update]

AIM

The results of a national survey from 1998 had shown at the time that only around 10 % of orthopaedic surgeons in Germany had strictly implemented modern cementing techniques in total hip arthroplasty (THA). The same study was repeated 5 years later to evaluate the current situation and to determine whether modern cementing techniques have become more popular.

METHODS

A detailed, slightly modified questionnaire regarding cement and bone preparation, cementing techniques on acetabulum and femur, and implant types was sent to 572 German orthopaedic and trauma hospitals, as well as to visiting surgeons with an interest in THA. In total, 293 questionnaires were available for evaluation and statistical analysis.

RESULTS

Palacos bone cement remained the most widely used cement (> 90 %). The mixing times given varied significantly. Vacuum mixing systems had become more popular (67.9 %). In the femur 81.8 % of the surgeons attempted to preserve cancellous bone and 57.2 % used pulsatile lavage (jet-lavage). Retrograde cement application via a cement gun was done in 71.1 %. Cement restrictors were used in more than 95 %. Only two-thirds of the surgeons implemented sustained cement pressurisation and preferred a cement mantle thickness > 2mm (64 %). Only 16.9 % made multiple small acetabular keyholes and 48.6 % used jet-lavage. In 73.1 % no cement gun was used and in 68.3 % the cement was applied at high viscosity. Manual cement pressurisation was done in 58.1 %. The Muller straight stem device remained the most popular implant. For only 5 of the over 50 stem designs implanted have long-term results been published as yet. Only 10.6 % of surgeons/centres performed > 20 and almost 50 % implanted > 100 cemented THAs/year.

CONCLUSION

The results of this survey demonstrated that, in comparison to 1998, the current state of cemented THA, in particular cementing technique has significantly improved. Future emphasis should be on continued surgeon education and training, as the operative, i. e., cementing techniques are of utmost importance for long-term success.

Die mediale Schlittenprothese mit mobilem Polyethylenmeniskus

Medial unicompartmental knee replacement (UKR) has many advantages over total replacement (TKR) including better function and reduced morbidity. However, the long-term failure rates of fixed-bearing UKR are high, especially because of polyethylene wear. The fully congruent mobile bearing of the Oxford UKR exhibits minimal polyethylene wear, failure from this cause does not seem to occur before 10 years. The instrumentation allows precise implantation to restore isometric function of the ligaments. During its 20 years development, the limits of usefulness of the implant have been established and found to include about one in four knees requiring replacement for osteoarthritis. In an independent series, using these criteria, the 15 year survival was 94%. Since 1998, the phase 3 implant has been used with modified instruments through a small incision, avoiding damage to the extensor mechanism. Patients now recover about three times faster than after TKR, and regain much better flexion (mean 135 degrees ). The current evidence supports that the minimally invasive Oxford UKR should be seriously considered as primary treatment for anteromedial compartment osteoarthritis-provided the appropriate surgical expertise is available.

Femurfissur nach Markraumstopperimplantation

Cement restrictors are accepted parts of modern cementing technique and reduce the risk of revision. The restrictor should seal the intramedullary cavity to ensure sustained pressurization and optimal cement penetration into cancellous bone. Significant complications after use of a cement restrictor are rarely described. Dislocation and cement leakage are well known problems. We describe the occurrence of a femoral fissure after insertion of a resorbable Gelatine cement restrictor.

Pattern of periprosthetic bone remodeling around stable uncemented tapered hip stems: a prospective 84-month follow-up study and a median 156-month cross-sectional study with DXA

Bone resorption in the proximal femur is commonly seen after total hip arthroplasty (THA). With dual energy X-ray absorptiometry (DXA), the amount of bone mass (BMD) after implantation of a total hip stem can be precisely determined. However, prospective evaluation of the change of bone mass around the stem is only available for selected stems and short-term follow-up (up to 36 months). We analyzed BMD in patients who had undergone uncemented THA by DXA. Only patients with good clinical outcome (Merle d' Aubigné score > 12) were included to obtain normative data for regular bone response. Two separate studies were performed: a prospective longitudinal study over 84 months with baseline values acquired within the first postoperative week (group A) (n = 26 patients) and a separate cross-sectional study, median follow-up 156 (124-178) months (group B) (n = 35 patients). Regions of interest were defined according to Gruen (ROI 1-7) and as net average ROI (net avg) for the periprosthetic femoral bone. After the initial remodeling process (12 months), BMD was compared to the 84-month (longitudinal) and the 156-month (cross-sectional) follow-up values to determine long-term periprosthetic changes of bone mineral density. The longitudinal study (group A), after the initial bone remodeling, showed no relevant further bone loss for women and men with BMD values 1.19 +/- 0.15 and 1.40 +/- 0.19, respectively, 12 months (women 89.8%, men 93.6%), and 1.19 +/- 0.13 and 1.36 +/- 0.18, respectively, after 84 months (women 90.0%, men 91.3%) (P = 0.98, P = 0.08,) respectively. The distribution of the BMD around the stem changed during the first 12 months. The ROIs around the proximal stem (ROI 1 and 7) showed the lowest absolute values at the 12-month follow-up and BMD in ROI 7 decreased most during the further follow-up until 84 months. The cross-sectional study (group B) showed no significant difference in BMD (net avg) values at a median of 156 months follow-up compared to the 12-month values (group A) (women: P = 0.77, men: P = 0.44). Initial BMD, implant diameter, and body mass index did not influence BMD loss (net avg) in this study, whereas age showed a weak correlation with BMD loss. The results show that after the initial remodeling process, no relevant further bone loss (net avg) occurs up to 84 months postsurgery, and values after a median of 156 months are similar. Normative long-term changes in the periprosthetic bone can be demonstrated in defined ROIs after implantation of a tapered corundum-blasted titanium stem with a good clinical result.

[Stability and occlusion of six different femoral cement restrictors]

Cement restrictors play an integral part in modern cementing technique in total hip arthroplasty. By sealing the femoral cavity, distal cement leakage is prevented and the intramedullary pressure is increased. Thus both the ability of the cement to interdigitate with bone and secondarily the shear strength of the cement bone interface are enhanced. For this purpose various plug models are available, which differ in design and material. Six different cement restrictors were investigated in a biomechanical model with regard to intramedullary implantation pressure, insertion force and in particular stability and sealing ability. We performed a pressure and stability measurement in artificial saw bones during the insertion and standardised cement application and pressurisation. The REX Cement Stop, which is the only intramedullary expandable cement restrictor, yielded the best results in all of the parameters investigated. The flexible gelatin plugs (Biostop G, IMSET, Plugin Tech) also reached a sufficient canal occlusion and stability, but with slightly higher insertion pressures and forces. However, the more rigid polyethylene restrictors (BUCK, Universal Cement Restrictor) showed a reduced stability and poor sealing ability. The latter devices cannot be recommended for use with modern cementing techniques.

In vitro performance of intramedullary cement restrictors in total hip arthroplasty

Contemporary cementing techniques in total hip arthroplasty include the use of a cement restrictor to occlude the intramedullary canal. As there are many different designs currently available it was the aim of our study to compare the stability of eight different systems. We investigated the displacement and the ability to occlude the femur of these cement restrictors during standardised cementing of artificial and fresh frozen femora. The maximal intramedullary pressures and the displacement of the plugs were continuously recorded and statistically evaluated. The results revealed significant differences between the tested cement restrictors. The expandable REX Cement Stop and the Exeter Plug achieved the highest stability and the least cement leakage. The more rigid designs (Palacos Plug, BUCK, Universal) in contrast showed inferior performance. Our biomechanical study emphasises the importance of cement restrictor selection, which can have a crucial influence on the fixation of a cemented total hip replacement.

A ten- to 15-year follow-up of the cementless spotorno stem

We followed the first 354 consecutive implantations of a cementless, double-tapered straight femoral stem in 326 patients. Follow-up was at a mean of 12 years (10 to 15). The mean age of the patients was 57 years (13 to 81). At follow-up, 56 patients (59 hips) had died, and eight (eight hips) had been lost to follow-up. Twenty-five hips underwent femoral revision, eight for infection, three for periprosthetic fracture and 14 for aseptic loosening. The overall survival was 92% at 12 years (95% CI 88 to 95). Survival with femoral revision for aseptic loosening as an endpoint was 95% (95% CI 92 to 98). The median Harris hip score at follow-up was 84 points (23 to 100). Radiolucent lines (< 2 mm) in Gruen zones 1 and 7 were present in 38 (16%) and 34 hips (14%), respectively. Radiolucencies in zones 2 to 6 were found in five hips (2%). The results for mid- to long-term survival with this femoral component are encouraging and compare with those achieved in primary cemented total hip arthroplasty. The high rate of loosening of the cup and the high rate of pain are, however, a source of concern.

[Fat embolism during total hip arthroplasty. Cementless versus cemented--a quantitative in vivo comparison in an animal model]

Thrombembolic complications,which include the fat embolism syndrome, are well-known consequences of cementless and cemented femoral total hip replacement. Thrombembolic phenomena have been demonstrated in clinical and experimental situations with both these fixation techniques, but so far no exact quantification of the intravasated fat emboli has been performed. In a standardized animal model in 15 Merino sheep we investigated the intravasation of fat into the bloodstream during simultaneous bilateral prosthetic implantation (cemented versus cementless). After identical preparation of the intramedullary canal on both sides, a cement restrictor was additionally inserted on the cemented side and the canal was cleaned by 250 ml jet lavage. Catheters in the external iliac veins made it possible to collect the drained blood in two phases, after preparation of the intramedullary canal and during insertion of the prosthesis, and the fat content of these blood samples was measured. The amount of fat that passed into the venous draining system of the femur induced by cemented implantation (2.2749 g; S=+/-1.0079) was twice the amount seen with cementless implantation (1.1586 g; S=+/-0.4555) ( P=0.0002). An obvious effect of the canal preparation was recognizable with the cemented implantation, 8 of the 13 animals evaluated showing a peak in the fat intravasation caused by application of the cement restrictor. Our results emphasize the importance of a thorough preparation of the intramedullary canal, particularly when cemented fixation is performed. The jet lavage,which should be considered mandatory standard in cemented total hip arthroplasty, should be implemented before the insertion of the cement restrictor in order to further reduce the risk of fat embolism.

[Cement delivery depends on cement gun performance and cement viscosity]

AIM

Retrograde cement application is considered an integral part of the modern femoral cementing technique. Both pressurisation and rapid cement application reduce the risk of interface bleeding and blood laminations. In this context cement gun performance has received little attention.

METHOD

In our study we examined the handling characteristics of four different cement delivery systems (Syringe, Vaku-Mix, Optivac and MixOR-System). To allow for cement viscosity as another variable, six different bone cements (Palacos R, Palamed G, CMW 1 Radiopak, CMW 2000, Simplex P, VersaBond) were used with each system. We recorded cement gun performance and measured extrusion times and maximum cement delivery speeds of all possible combinations (gun/mixing system plus cement type).

RESULTS

The fastest cement application could be achieved with the Vaku-Mix cement delivery system and the corresponding cement gun (Mark III). With regard to cement type, VersaBond and prechilled Palacos yielded significantly shorter extrusion times than most of the other cements due to their lower viscosities.

CONCLUSION

Our results have shown significantly different efficacies of commonly used cement delivery systems/guns in clinical routine. Improved systems should be provided by the suppliers.

[Bone cements based on polymethylmethacrylate]

Bone cements based on polymethylmethacrylate (PMMA) remain an important material for anchorage of artificial joints. Polymers based on PMMA originally developed for dental surgery have been successfully used in bone surgery for more than 40 years. At first sight the cold-curing PMMA bone cement seems to be a rather simple material consisting of a powder and a liquid. But in fact it is a complex material fulfilling various functions at its application site after the implantation. Its properties vary according to the composition of its basic elements. They already play a decisive role for the working behavior during mixing of both components. The differences in the working behavior considerably affect the cementing technique and the accurate application in vivo. These influence the mechanical performance of the cured cement mantle and the long-term results of the implantation. Standardized test methods are used to characterize bone cements,whereas the clinical relevance of the test methods has to be evaluated critically.Additionally,PMMA bone cements act as a drug delivery system as a local carrier of antibiotics. This paper gives a review of the composition and properties of PMMA bone cements and their influence on practical application.

[Bone substitutes]

A large variety of different bone substitutes are available for the treatment of congenital or acquired bone defects as an alternative to bone transplantation. Complications associated with graft harvesting, limited donor resources, and the potential risk of transmission of infectious diseases have led to the development of multiple concepts of new bone substitutes to minimize the wellknown problems. This article intends to give an overview of the products currently available on the market. Inorganic materials such as ceramics from hydroxyapatite and/or tricalcium phosphate, calcium phosphate cements, calcium sulfates and bioglass,organic materials (polymers) and composites, xenografts,and glass ionomer cements are discussed.

[Integration of periosteum covered autogenous bone grafts with and without autologous chondrocytes. An animal experiment using the Göttinger minipig]

Autologous osteochondral transplantation has the major disadvantage of significant damage to a healthy joint surface at the donor site. The purpose of this study was to examine the effect of autogenous chondrocytes injected into the periosteum of autologous bone grafts in order to provide an alternative method for cartilage repair. A total of 22 Göttinger minipigs were operated twice on both knees. The first operation served for cartilage biopsy for the chondrocyte culture. During the second operation an osteochondral defect was created in the medial facet of the trochlear groove. The defect was treated differently with an autologous cortico-cancellous bone cylinder,harvested from the proximal tibia.Group A: untreated defect (control);B: bone-graft;C: bone-graft covered with periosteum; D: bone-graft with periosteum and injected autologous chondrocytes. The animals were killed after 6, 12, 26 and 52 weeks. The regenerated areas were evaluated macroscopically, tested biomechanically (long-term specimens; indentation-test) and a histological, blind evaluation was carried out according to a semi-quantitative scoring system. The periosteum covered bone cylinders in Groups C and D showed good repair of the bone and cartilage defect. The repaired tissue consisted predominantly of fibrocartilage with the partial formation of hyalin like tissue. The regenerated areas were integrated with the adjacent cartilage and were biomechanically superior when compared with the other groups. The additional injection of chondrocytes did not produce significantly better results. Our findings suggest that the transplantation of periosteum-covered bone cylinders may provide an alternative method for treating chondral and osteochondral defects and can be recommended for filling large donor site defects in joint surgery. The additional transplantation of chondrocytes does not seem to be justified.

[New PMMA bone cements for vacuum mixing systems]

In cemented total hip replacement, fractures and cracks in the cement mantle may facilitate mechanical loosening of the prosthesis. Especially large voids and flaws within the cement can cause fatigue fractures. Reduction of cement porosity is a logical step in the attempt to improve the quality and durability of bone cement. An effective reduction of pores during vacuum mixing requires prechilling of Palacos R at 4 degrees C. For easier handling, new bone cements have been developed with characteristics similar to Palacos R, but with no chilling necessary prior to mixing under vacuum. In our study two newly developed bone cements (Palamed G, VersaBond) and a bone cement used widely in clinics (Palacos R) were mixed in three different vacuum mixing systems (Optivac, MixOR, Palamix). Macro-, micro-, and total porosity and bending strength (ISO 5833) were determined. All three mixing systems proved effective in reducing porosity and showed constant mixing results. All cement specimens that we tested fulfilled the ISO requirements for bending strength. VersaBond yielded the lowest porosities, but showed lower viscosity compared to Palacos R and Palamed G. The new cements are equal in vitro to Palacos R with regard to bending strength, but further clinical studies are necessary before widespread use is advisable.

[Influence of implant position of a hip prosthesis on alignment exemplified by the CLS shaft]

We performed a clinical and radiological analysis to evaluate the significance of the stem position of cementless CLS components with respect to function and survival. We used patient material from a multi-center study of 3,732 CLS stems with a mean follow-up of 43 months (range: 12-142 months). The clinical outcome was assessed using Merle D'Aubigné Scores and stem alignment was determined as the deviation of the longitudinal stem axis from the longitudinal femur axis. We found no correlation between stem alignment and function, survival, implant migration or periprosthetic radiolucent lines. In patients with rheumatoid arthritis and hip ankylosis the neutral stem position was less often achieved than in patients with other diagnoses. The results of our study cast doubt on whether the varus position of the femoral component of cementless tapered CLS-type stem designs is as critical as in cemented total hip arthroplasty.

[Developments in hip hemi-arthroplasty and theory of the link-chain dimeric hip prosthesis]

Aim of the study was to analyze the developments of hemiarthroplasties from the femur prosthesis to the bicentric bipolar prosthesis of today. Using the theories published 1990 by Nägerl about "dimeric link chains", nineteen bipolar-head systems were analyzed and biomechanically explained. Clinical findings, such as the problems of luxation and varus positioning of the monocentric bipolars, as well as the valgus, "self-centric" positioning of the bicentric prosthesis are discussed and explained correctly by physics. The hemiarthoplasty with the bicentric bipolar system of today has realized the principles of the dimeric link chains and is superior concept. Eleven of the sixteen today available systems work like this concept which was reached by try and error. The function of a bicentric system is solved now and explained by physics.

[Emission of air pollutants in removal of bone cement with ultrasound instruments in revision endoprosthetics]

The use of ultrasonic instruments to remove PMMA bone cement during revision hip arthroplasty results in the production of fumes. These emissions were analysed under standardized laboratory conditions, when it was found that the MMA concentration measured was only 1/10th of the MAC value. In terms of occupational safety, the MMA fumes emitted may therefore be considered non-hazardous for the medical personnel.

[Artefacts and ferromagnetism dependent on different metal alloys in magnetic resonance imaging. An experimental study]

The authors evaluated the significance of different metal alloys used in orthopaedic surgery in producing artefacts during magnetic resonance imaging. Several MRI sequences were tested and magnetic effects evaluated. Twelve discs made of different metal alloys from three manufacturers were examined. These discs were placed in a plastic box with a defined position in ultrasound gel. Then a sensitive, standard T1 weighted gradient echo sequence (TE: 4.1 ms; TR 9.4) was carried out in a coronal plane (Matrix 128/256). A Phillips Easy Vision workstation was used for image analysis. The largest area of artefact formation, including the surface size of the disc, was calculated using a special software program. In order to minimise the measurement error all discs were measured 10 times and the average value was determined. Then eight different sequences were run and measured in the same way. In a second series, all discs were placed separately on metric paper and subjected to the magnetic field of the MRI in order to detect possible motion secondary to the magnetic field applied. The different titanium alloys showed average distortion areas of from 245 mm2 (Ti6Al4V) to 349 mm2 (Ti5Al2.5Fe). Cobalt chrome alloys yielded differences of between 600 mm2 and 651 mm2 and iron alloys of between 902 mm2 (316L or Fe18Cr10NiMo) and 950 mm2 (Fe22Cr10Ni4Mn2MoNb) on average for the standard T1 weighted gradient echo. The artefact areas were dependent on the different sequences performed. For steel, (Fe18Cr10NiMo) areas of from 411 mm2 (T1TSE) to 2027 mm2 (EPI/3D/SPIR) were measured. All sequences studied produced different artefact pictures. None of the materials tested showed changes in position secondary to ferromagnetism. The size of signal distortion by MRI depends on the alloy making up the implanted material and the sequences used. The smallest artefacts occurred with the turbo-spin-echo sequences (TSE). The alloys tested in our study seem to carry no risk for patients of ferromagnetically induced secondary loosening caused by MRI scanning.

Dependency of cement mantle thickness on femoral stem design and centralizer

Deficient cement mantles may be detrimental with regard to long-term outcome of cemented femoral stems. We performed a cadaver study on 48 left femora with 4 different stem designs (1 anatomic, 3 straight) to study the influence of stem design, centralizer, and femur type on cement mantle thickness. A radiographic and microradiograhic analysis was done. Overall, 88% of stems were aligned within 1 degrees of neutral in the frontal plane. In Gruen zones 1 through 7, we measured 24 thin cement mantles (<2 mm) in 19 specimens with no correlation to stem design or zone. In the sagittal plane, typical areas of thin cement mantles were identified in Gruen zones 8 and 9 (n = 39) and 12 (n = 21). The anatomic stem design carried the lowest risk (54%) of producing a thin cement mantle proximally in Gruen zones 8 and 9. The risk for straight stem designs was >90%. Straight stems without centralizer showed the highest risk of thin cement mantles in Gruen zone 12 (93%). Centralizers were efficient to prevent thin cement mantles in zone 12 but had no effect proximally. Lateral radiographs are essential to allow for adequate radiographic assessment of the cement mantle and stem alignment. There is a high risk of producing thin cement mantles in Gruen zones 8 and 9, in particular when straight stems are used. Posterior canal entry and low neck osteotomies are essential. Anatomic stems respect the anatomy, allow for more even cement mantles, minimize the risk of thin cement mantles without the use of centralizers, and may be considered in the femur with marked proximal bow.

[Thromboembolic complications related to the use of bone cement in hip arthroplasty--pathogenesis and prophylaxis]

INTRODUCTION

Cemented total hip arthroplasty (THA) has to be considered a high-risk procedure with respect to cardiovascular complications. The insertion of cement and prosthesis may lead to intravasation of fat and bone marrow into the circulation.

METHODS

This article represents a review on the relevant literature about thromboembolic complications associated with the use of bone cement in THA.

RESULTS/DISCUSSION

The method of canal preparation and lavage is of paramount importance to reduce the potential embolic load. Additionally, thorough cleaning of the intramedullary cavity (using jet lavage) improves the cement penetration into the bone and increases the shear strength of the bone-cement interface. Modern cementing techniques include the use of high pulsatile lavage, a cement restrictor and cement pressurization. With the application of these techniques a sufficient drainage of the medullary canal should be guaranteed to minimise the risk for thromboembolic complications. During the insertion of cementless implants the intravasation of embolic material seems to be less, but it is likewise possible to have a thromboembolic complication during cementless THA. However, it is not justified as a consequence to use the thromboembolic risk as the main indication for implant choice, in particular as the overall risk of a serious fatal complication is low.

Cement penetration in the proximal femur does not depend on broach surface finish

In a cadaver study, we prepared 29 paired human cadaver femora using 3 different broaches of identical geometry but different surface characteristics. In one group of 20 pairs, preparation with chipped-toothed broaches was compared to diamond-shaped broaches; in the other group of 9 pairs, polished tamps for compaction of cancellous bone were compared with chipped-tooth broaches. Cancellous bone was irrigated with 1 liter pulsed lavage. The specimens were embedded in specially-designed pots. Palacos R and Simplex bone cements were used. After vacuum mixing, the cement was applied in a retrograde manner and subjected to a standard pressure protocol with a constant force of 3,000 N. Radiographs were taken and horizontal sections were obtained at predefined levels using a diamond saw. Microradiographs were taken, digitized and analyzed to assess cement penetration into cancellous bone. In 6 of 9 femora prepared using smooth tamps, femoral fractures occurred despite careful preparation technique. The microradiographic evaluation showed no significant morphometric differences between diamond and chipped-tooth or between polished and chipped-tooth broaches with regard to cement penetration into cancellous bone. Therefore, in the presence of pulsed lavage, one finds no significant effect of broach surface characteristics on cement penetration into cancellous bone of the proximal end of the femur.

[Significance of jet lavage for in vitro and in vivo cement penetration]

AIM

The purpose of this study was to determine the efficacy of pulsatile jet lavage and manual syringe lavage with regard to their cleansing capabilities as measured by cement penetration into cancellous bone both in vivo and in vitro.

METHODS

Three separate experiments were performed. Study A: In a cadaver study 36 left human cadaver femora were used for implantation of cemented femoral components. Conventional broaches were used for femoral preparation. Bone lavage was carried out either using jet lavage or manual syringe lavage of equal volume. The allocation to two different lavage groups was randomised. In both groups high-pressurising cementing techniques were implemented with the use of a proximal seal and additional finger packing. Study B: To guarantee standardised cement pressurisation and equal bone quality, the influence of jet lavage (1000 ml) versus syringe lavage (1000 ml) was studied in 11 paired human cadaver femora in an additional study without prosthesis implantation. The specimens were imbedded in specially designed pots. Bone cement was applied in a retrograde manner and subjected to a standard pressure protocol with a constant force of 3000 N. Study C: To directly compare the effectiveness of both pulsatile jet and syringe lavage with regard to cement penetration in vivo, a new sheep model allowing for standardised bilateral, simultaneous cement pressurisation was used. After femoral neck osteotomies both femoral cavities of 10 sheep were prepared for retrograde cement application. After randomisation one side was lavaged with 250 ml irrigation using a bladder syringe, the contralateral femur with the identical volume but using a pulsatile lavage. A specially designed apparatus was used to allow for bilateral simultaneous cement pressurisation.

ANALYSIS

In all studies horizontal sections were obtained from the femoral specimens at predefined levels using a diamond saw. Microradiographs were taken and analysed using image analysis to assess cement penetration into cancellous bone.

RESULTS

Study A: Compared with syringe lavage the use of jet lavage significantly improved the penetration of cement into cancellous bone (p = 0.027). In the presence of strong, dense cancellous bone the findings were more pronounced. Study B: Our results show that in equal quality bone, the use of jet lavage yields significantly (p < 0.001) improved cement penetration compared to syringe lavage specimens. Study C: The results of the in vivo study confirmed the superiority of jet lavage bone surface preparation (p = 0.002).

CONCLUSIONS

The use of jet lavage yields significantly improved interdigitation between cancellous bone and cement both in vitro and in vivo and should be regarded as mandatory in cemented total hip arthroplasty. High pressurising techniques are effective means to improve cement penetration, but should only be administered with jet lavage to reduce the risk of fat embolism.

[Anchoring principles in hip prosthesis implantation. II: Acetabulum components]

In this review the different anchorage concepts of cemented and cementless acetabular components are presented and clinical long-term results--if available--are discussed. Despite numerous design improvements and modifications the long-term durability of acetabular components remains a major concern with results being clearly inferior than achieved with femoral components. Until valid, prospective long-term success is proven for cementless designs cemented acetabular fixation using modern cementing technique must be regarded as standard treatment. However, successful fixation over 15-20 years very much depends on the quality of operative and cementing technique. Some cementless systems appear easier to use and have been documented to offer reliable mid-term survival rates. In young patients cementless devices have been well established and for some systems promising 10-year results have been published.

[Anchoring principles in hip endoprostheses. I: Prosthesis stem]

Total hip replacement is one of the most successful procedures in surgery. In Germany there is a great variety of cemented and uncemented implants with different principles of fixation. We reviewed the different principles, with particular reference to long-term clinical outcome, and discuss the most popular systems available in Germany. Despite many new developments which have been made in the field of cementless hip replacement, cemented total hip arthroplasty will remain the "gold standard" until prospective long-term data (> 15 years) of cementless systems become available.

Lavage technique in total hip arthroplasty: jet lavage produces better cement penetration than syringe lavage in the proximal femur

Sixteen paired human cadaver femora were prepared using conventional broaches. Cancellous bone was irrigated with 1 L pulsed lavage in one femur and 1 L syringe lavage in the contralateral femur. The specimens were embedded in specially designed pots, and vacuum-mixed bone-cements were applied in a retrograde manner. After application of a standard pressure to the pots, the femora were removed and radiographed, and horizontal sections were obtained and analyzed to assess cement penetration into cancellous bone and the ratio of the area of supported to unsupported cancellous bone (Rcb). Our results show that in equal quality bone, the use of jet lavage yields significantly (P < .0001) improved cement penetration and Rcb compared with syringe lavage specimens. Jet lavage should be considered routine to achieve interdigitation with cancellous bone in cemented total hip arthroplasty.

Ultrastructural findings after intraarticular application of hyaluronan in a canine model of arthropathy

We investigated the effect of intraarticularly applied hyaluronic acid (hyaluronan) on the cartilaginous structure of experimentally induced chondromalacia patellae in dogs. For the induction of chondromalacia, we used the Pond-Nuki technique, which involved severance and resection of the anterior cruciate ligament, as a canine model of arthropathy in 27 foxhounds (three groups of nine animals each). In a pilot study, we evaluated the effect of resection of the anterior cruciate ligament with no therapy. Patellar specimens were retrieved at 3, 6, and 12 weeks postoperatively. Subsequently, we compared a treatment group that received intraarticular injections of hyaluronan with a placebo group that received saline solution. The groups were compared at 3, 6, and 12 weeks postoperatively. Three animals from the treatment and placebo groups received five injections of hyaluronan during one of the 4-week intervals (weeks 3-6, 6-9, or 12-15). Specimens were retrieved 5 weeks after the last injection. In both groups, the uninvolved contralateral knee served as a control. The specimens were taken from the medial and lateral patellar poles. Histological analysis included light microscopy and transmission electron microscopy. The structural and ultrastructural changes were assessed qualitatively and were quantified with use of a modified Mankin score. Our results indicate that chondromalacia patellae may be induced with the Pond-Nuki technique. We found a significant reduction (p < 0.01) of cartilaginous lesions in the hyaluronan group compared with the placebo group. Our results suggest that intraarticularly applied hyaluronan is effective in delaying the degenerative process of cartilage degradation. Therefore, we conclude that the use of hyaluronan may be indicated during the early stages of chondromalacia.

[Cemented hip prosthesis implantation--decreasing the rate of fat embolism with pulsed pressure lavage]

Intraoperative fat embolism associated with cemented total hip arthroplasty is a well recognized complication. In a new sheep model allowing for standardized bilateral, simultaneous cement pressurization we studied the effectiveness of both pulsatile and syringe lavage of equal volume with regard to their cleansing capabilities as measured by fat and bone marrow intravasation. The operative procedure involved bilateral placement of intravenous catheters into the external iliac veins via retroperitoneal approach. After femoral neck osteotomies both femoral cavities were prepared for retrograde cement application. After randomization one side was lavaged with 250 ml irrigation using a bladder syringe, the contralateral femur with the identical volume but using a pulsatile lavage. A specially designed apparatus was used to allow for bilateral simultaneous cement pressurization. Venous blood from both iliac catheters was then collected, anticoagulated and a quantitative and qualitative fat analysis was performed. Despite equal volume manual lavage produced significantly higher fat and bone marrow intravasation (P < 0.001) than pulsatile lavage thus suggesting that not only the volume but also the quality of bone lavage is an essential factor influencing the risk of fat embolism and adverse cardiorespiratory effects. Our findings further emphasize the important role of pulsatile lavage in preventing fat and bone marrow embolisation during cemented total hip arthroplasty.