Zeolite membrane reactors: from preparation to application in heterogeneous catalytic reactions

Coupling chemical reaction with membrane separation or known as membrane reactor (MR) has been demonstrated by numerous studies and showed that this strategy has successfully addressed the goal of process intensification.

Incinerator bottom ash derived from municipal solid waste as a potential catalytic support for biomass tar reforming

Environment-friendly and sustainable routes for municipal solid waste (MSW) incineration bottom ash (IBA) recycling and utilization is one of the major concerns for the urbanized countries like Singapore. In this research paper, the possibility of bulk utilization of MSW-IBA as a catalyst support material has been explored for sustainable syn-gas production. The change in the texture of the IBA with simple hydrothermal treatment using NaOH has also been investigated. Furthermore, with hydrothermal treatment for 24 h at 180 °C, the texture of raw IBA with respect to basicity, surface area, total pore volume and reducibility was greatly improved. These textural properties are highly significant for a material to be utilized as a catalyst or catalytic supports for reforming applications. Ni supported on hydrothermally treated IBA was tested for steam reforming of biomass tar reforming reaction between 700 °C and 800 °C at relatively low steam-to-carbon ratio of 2. Among all the catalysts, Ni supported on IBA hydrothermally treated for 24 h gave stable toluene conversion (of 40%) at 700 °C with reduced coke formation (of 7.5 mgC/g·h) than other catalysts. The superior catalytic performance of this catalyst is mainly due to the presence of high amounts of surface Ni° species and improved reducibility and basicity properties among all. The Raman, DT/TGA and XRD analyses on spent catalysts revealed the deposited carbon during steam reforming of tar reaction is majorly amorphous. Due to this, the deposition of carbon did not show any kind of deactivation within the catalyst testing period.

Ni-phyllosilicate structure derived Ni–SiO2–MgO catalysts for bi-reforming applications: acidity, basicity and thermal stability

In this work, Ni–SiO₂–MgO materials synthesized via Ni-phyllosilicate (PS) intermediates were explored for bi-reforming of methane (BRM) reaction.

Lanthanum oxycarbonate modified Cu/Al2O3 catalysts for selective hydrogenolysis of glucose to propylene glycol: base site requirements

Moderate and strong base sites play a key role in glucose hydrogenolysis over bifunctional Cu–La₂O₂CO₃/Al₂O₃ catalysts.

Synthesis and evaluation of highly dispersed SBA-15 supported Ni–Fe bimetallic catalysts for steam reforming of biomass derived tar reaction

Highly dispersed Ni–Fe bimetallic catalysts supported on mesoporous SBA-15 were synthesized via an incipient wetness impregnation method by impregnation of a small amount of oleic acid mixed with a metal precursor on the SBA-15 support.

CO2reforming of methane over highly active La-promoted Ni supported on SBA-15 catalysts: mechanism and kinetic modelling

Various Ni catalysts were synthesized by combining a high surface area SBA-15 support, a novel preparation method using an oleic acid precursor to obtain highly dispersed and small Ni particles, and the basic property of La.

Bimetallic Ni–Cu alloy nanoparticles supported on silica for the water-gas shift reaction: activating surface hydroxyls via enhanced CO adsorption

Strong CO adsorption activates surface OH for enhanced WGS activity.

Ni and/or Ni–Cu alloys supported over SiO2catalysts synthesized via phyllosilicate structures for steam reforming of biomass tar reaction

In this paper, we describe the synthesis of Ni/SiO₂and Ni–Cu/SiO₂catalysts derived from phyllosilicate structures (Ni/SiO_2Pand Ni–Cu/SiO_2P, respectively) for steam reforming of biomass tar reaction.

Gas sensing properties of tin oxide nanostructures synthesized via a solid-state reaction method

A high-yield synthesis of SnO(2) nanoparticles via a facile, economical and easily scalable solid-state molten salt synthesis method has been demonstrated. The inorganic additive, molar ratios of chemicals and annealing temperature were found to control the size and porosity of the SnO(2) nanoparticles. The synthesized SnO(2) nanostructures were uniform, well dispersed and exhibited high crystallinity. Hydrogen sensors made from the SnO(2) nanoparticles were found to possess high sensitivity and stability. Other than tailoring the material's structure in terms of size and porosity, another potential method of enhancing the gas sensitivity is functionalization with noble Pd metal.

Functionalized SBA-15 materials as carriers for controlled drug delivery: influence of surface properties on matrix-drug interactions

Mesoporous SBA-15 materials were functionalized with amine groups through postsynthesis and one-pot synthesis, and the resulting functionalized materials were investigated as matrixes for controlled drug delivery. The materials were characterized by FTIR, N(2) adsorption/desorption analysis, zeta potential measurement, XRD, XPS, and TEM. Ibuprofen (IBU) and bovine serum albumin (BSA) were selected as model drugs and loaded onto the unmodified and functionalized SBA-15. It was revealed that the adsorption capacities and release behaviors of these model drugs were highly dependent on the different surface properties of SBA-15 materials. The release rate of IBU from SBA-15 functionalized by postsynthesis is found to be effectively controlled as compared to that from pure SBA-15 and SBA-15 functionalized by one-pot synthesis due to the ionic interaction between carboxyl groups in IBU and amine groups on the surface of SBA-15. However, SBA-15 functionalized by one-pot synthesis is found to be more favorable for the adsorption and release of BSA due to the balance of electrostatic interaction and hydrophilic interaction between BSA and the functionalized SBA-15 matrix.

Preparation of supported mesoporous thin films concerning template removal by supercritical fluid extraction

Thin films of silicate MCM-41 and silicate MCM-48 have been prepared on porous ceramic supports by the hydrothermal method. A comparative study of template removal has been made on supported thin films and on powder. By supercritical fluid extraction (SFE) with CH(3)OH-modified CO(2), at least 78% of the template can be removed from as-synthesized materials at 85 degrees C. X-ray diffraction (XRD) observations indicate that the resulting supported thin films after SFE are structurally stable and ordered with a weak pore contraction. The advantages of SFE over calcination in template removal are presented with a series of results obtained on supported thin films and on powder by XRD and N(2) adsorption-desorption.

CO2 adsorption over Si-MCM-41 materials having basic sites created by postmodification with La2O3

Moderate basic sites could be created onto mesoporous Si-MCM-41 materials by postsynthesis modification with highly dispersed La2O3. The La2O3-modified MCM-41 materials (designated here as LaM) have been characterized by Fourier transform infrared spectroscopy, temperature-programmed desorption, X-ray photoelectron spectroscopy, X-ray diffraction (XRD), and N2 adsorption/desorption and have been tested as model adsorbents for CO2 adsorption. XRD and N2 adsorption results showed that all LaM materials still maintained their uniform hexagonal mesoporous structure even after postsynthesis modification with La2O3 loading up to 20 wt %. Although the surface area, pore size, and pore volume of LaM materials decreased with increasing La2O3 loading, their capacity for CO2 storage could be significantly improved when La2O3 loading was increased from 0 to 10 wt %. Unidentate and bidentate carbonates have been identified by in situ FTIR as the two types of CO2 species adsorbed on LaM surface. The LaM material also possesses good thermal stability, allowing the model adsorbent to be regenerated at high temperature and recyclable.